Schneider Electric b3600 Series Data Sheet

Andover ContinuumTM

b3600 Series

Local Controllers

The Andover ContinuumTM b3600 series controllers are native BACnet controllers that communicate on an RS-485 field bus as Master devices using the MS/TP BACnet protocol.

02

Andover Continuum

b3600 Series Local Connectors

Features

Product AT A GLANCE

•Native BACnet MS/TP Communications for Interoperability to Third-Party Systems

•Supports 18 BACnet Object Types including Trends, Schedules, Calendars, and Loops

•Powerful, Flexible System Controller for the Most Demanding Applications

•Ideal for Monitoring Small or Large Groups of Inputs in a Concentrated Area

•Universal Inputs can be Configured as a Supervised Input for Monitoring Open Wires or Short Circuits

•Non-Volatile Flash Memory Provides Utmost Reliability — Stores Both Application Program and Operating System

•Local, Extended Storage of Log Data

•BTL Listed B-AAC Controller with Local Trends

The b3600 series are designed for monitoring a small or large concentration of input points from a single controller. Choose the b3600 series controller with the input configuration that matches your application:

•The b3608, with eight Universal inputs, is designed for stand-alone equipment monitoring for a small concentration of input points. This controller is also configurable for Supervised Input monitoring to determine broken wire detection or shorts. The b3608 is ideal for security applications (motion detection, glass break detection, intrusion detection) or traditional control applications (temperature, humidity, etc).

•The b3624 provides the same functionality as the b3608 and in the same small footprint of the b3608, but with three times the number of input points (24) for monitoring various device signals.

With the small footprint and high point count, the b3624 is ideal for large concentration of inputs, reducing the number of controllers required in the system, and decreasing cost, complexity, and maintenance requirements.

The b3600 series also features Flash memory, increased user memory, and a fast (32-bit) processor for faster scan times, with plenty of memory available for data logging of your critical data.

As a native BACnet controller, the b3600 series can communicate with other BACnet devices on the MS/TP network, in strict accordance with

ANSI/ASHRAE standard 135-2004, and are listed with the BACnet Testing Labs (BTL) as BACnet Advanced Application Controllers (B-AAC). By connecting to an Andover Continuum b4920 device or bCX1 Network Controller, the b3600 series and other MS/TP devices can share data from the wider Ethernet/IP network of controllers.

Schneider Electric

SDS-B3600-A4.BU.N.EN.10.2005.0.00.CC