SATO All-In-One Application 1-29
User Manual
SATO CUPS Driver for Mac OS X 2-29
User Manual
Software License Agreement
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS
BEFORE USING THIS PRODUCT. BY INSTALLING THE
PRODUCT YOU THEREBY INDICATE YOUR ACCEPTANCE OF
THESE TERMS AND CONDITIONS. SHOULD YOU DISAGREE
WITH ANY OF THE TERMS OR CONDITIONS LISTED BELOW,
PROMPTLY REMOVE ALL FILES RELATED TO THIS PRODUCT
FROM YOUR HOST PLATFORM AND RETURN THE PRODUCT
TO SATO CORPORATION.
1. You explicitly agree to accept a non-exclusive license to use
the Software identified on the distribution media solely for your
own customary business or personal purposes. Your local
and national laws govern this Agreement.
2. Henceforth, “Software” shall refer to the digitally encoded,
machine-readable data and program. The term “Software
Product” includes the Software identified on the distribution
media, including any accompanying documentation. The
term “Distribution Media” refers to any method by which the
Software Product is delivered to the end user, including but
not limited to Floppy Disks, CD-ROM, Magnetic Tape and
On-Line distribution via the Internet. The Software Product is
licensed (not sold) to you, and SATO® either owns or
licenses from other vendors who own all copyright, trade
secret, patent and other proprietary rights in the Software
Product.
3. To protect the proprietary rights of SATO Corporation, you
agree to maintain the Software Product and other proprietary
information concerning the Software Product in strict
confidence and to establish reasonable procedures regulating
access to and use of the software.
4. You agree not to duplicate or copy the Software except that you
may make one backup copy. You agree that any such copy
shall contain the same proprietary notices as those appearing
on the original.
5. You shall not sub-license, sell, lease, or otherwise transfer all
or any portion of the Software Product separate from the
printer(s), without the prior written consent of SATO
Corporation.
6. You may not modify or prepare derivative works of the
Software Product. You may not transmit the Software
Product over a network, by telephone, or electronically
using any means; or reverse engineer, decompile or
disassemble the Software.
7. You may transfer the Software Product with the printer(s), but
only if the recipient agrees to accept the terms and conditions
of this Agreement. Your license is automatically terminated if
you transfer the Software Product and printer(s).
8. This License remains in force until terminated, and may be
terminated by agreement between you and SATO
Corporation, or by SATO Corporation, if you fail to comply with
the terms of this License if such failure is not corrected within
thirty (30) days after notice. When this License is terminated,
you shall either return to the place you obtained them from, or
destroy, the printer and all copies of the Software and
documentation.
9. SATO Corporation warrants that for ninety (90) days after
delivery, the Software will perform in accordance with
specifications published by SATO Corporation, and that the
distribution media will be free from defects in material and
workmanship. SATO Corporation does not warrant that the
Software is free from all bugs, errors and omissions.
10. Your exclusive remedy and the sole liability of SATO
Corporation in connection with the Software is replacement
of defective distribution media upon their return to SATO
Corporation. SATO Corporation will not be liable for any loss
or damage caused by delays in furnishing a Software Product
or any other performance under this Agreement.
SATO Corporation does not warrant that the functions contained in
the Software will meet your requirements or that the operation of
the Software will be uninterrupted or error free.
11. Use, duplication or disclosure by the Government is subject
to restrictions as set forth in the relevant guidelines of your
country, such as the Rights in Technical Data and Computer
Software clause at FAR 242.227- 7013, subdivision (b) (3) (ii)
or subparagraph (c) (1) (ii), as appropriate. Further use,
duplication or disclosure is subject to restrictions applicable to
restricted rights software as set forth in FAR 52.227-19 (c) (2)
or equivalent rules.
THE PARTIES AGREE THAT ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
FITNESS FOR A PARTICULAR PURPOSE AND
MERCHANTABILITY ARE EXCLUDED.
SATO Corporation reserves the right to make changes and/or
improvements in the Software without notice at any time.
IN NO EVENT WILL SATO CORPORATION BE LIABLE FOR
LOST PROFITS, LOST DATA, BUSINESS INTERRUPTIONS
OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OF OR INABILITY TO USE THIS PRODUCT, EVEN IF SATO
CORPORATION HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES, OR ANY DAMAGES CAUSED BY
ABUSE OR MANIPULATION OF THE SOFTWARE. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS
AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND
BY ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE
BOUND BY ANY STATEMENT OR REPRESENTATION NOT
CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS
AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED
BY PROPERLY AUTHORIZED REPRESENTATIVES OF EACH
PARTY. BY INSTALLING THIS SOFTWARE PRODUCT, YOU
AGREE TO ACCEPT THE TERMS AND-CONDITIONS OF THIS
AGREEMENT.
SATO CUPS Driver for Mac OS X 3-29
User Manual
Copyrights
The contents of this document are proprietary information of SATO Corporation and/or its
subsidiaries in Japan, the U.S and other countries. No part of this document may be
reproduced, copied, translated or incorporated in any other material in any form or by any
means, whether manual, graphic, electronic, mechanical or otherwise, without the prior
written consent of SATO Corporation.
SATO Corporation and/or its subsidiaries in Japan, the U.S and other countries make no
representations or warranties of any kind regarding this material, including, but not limited
to, implied warranties of merchantability and fitness for a particular purpose. SATO
Corporation shall not be held responsible for errors contained herein or any omissions
from this material or for any damages, whether direct, indirect, incidental or consequential,
in connection with the furnishing, distribution, performance or use of this material.
SATO Corporation reserves the right to make changes and/or improvements in this
product and document without notice at any time.
Trademarks
SATO is a registered trademark of SATO Corporation and/or its subsidiaries in Japan, the U.S
and other countries.
CUPS, CUPS Logo, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and
other countries.
All other trademarks are the property of their respective owners.
Software updating disclaimer
While all efforts have been taken to ensure accuracy and currency of the information
contained herein, there are instances where the contents of this document may be
outdated. In that case, proceed to SATO worldwide websites (www.satoworldwide.com)
to check whether an updated document has been made available for your reference.
Version 1.20.0
© 2018 SATO Corporation. All rights reserved.
SATO CUPS Driver for Mac OS X 4-29
User Manual
Table of Contents
Table of Contents .......................................................................................... 4
1. Overview .................................................................................................. 5
1.1 Supported Models of SATO Printer .................................................... 5
1.2 Printer Properties/Options ................................................................... 6
2. System Requirements ............................................................................ 7
3. Setup ........................................................................................................ 8
3.1 Installing the Driver ............................................................................. 8
3.2 Uninstalling the Driver ....................................................................... 11
4. Managing the SATO Printer ................................................................. 12
4.1 Overview …………………………………………………………………..12
4.2 Managing Printers from the Print & Scan (System Preferences) ...... 12
4.2.1 Adding a New Printer ........................................................... 12
4.2.2 Removing the Printer ............................................................ 17
4.3 Managing Printers from the CUPS Web Interface ............................ 18
4.3.1 Adding a New Printer ........................................................... 18
4.3.2 Modify Printers ..................................................................... 22
4.3.3 Removing the Printer ............................................................ 24
4.3.4 Setting Default Printer Options ............................................. 26
4.4 Managing Printers from the Command Line ..................................... 28
4.5 Troubleshooting ................................................................................ 28
SATO CUPS Driver for Mac OS X 5-29
User Manual
The SATO Driver for Mac OS X system was developed to allow the users to print into the SATO
printer.
This driver is based on CUPS printing system for Mac OS X. All the device communications are
handled by CUPS (backend). The raster filter converts the CUPS raster graphic into SBPL
which the printer can understand. For an instance, if the user prints a label, the raster filter
converts the graphic into SBPL command which will be send to the printer together with the
printer options.
1.1 Supported Models of SATO Printer
Currently only the following models of printers are supported by the current version of the driver:
Series Name
Models
CG2 Series
CG208 DT/TT
CG212 DT/TT
CG4 Series
CG408 DT/TT
CG412 DT/TT
GZ4e Series
GZ408e
GZ412e
M84 Pro Series
M84 Pro 2
M84 Pro 3
M84 Pro 6
CL6e Series
CL608e
CL612e
CL4e Series
CL408e
CL412e
M84xxSe Series
M8485Se
M8490Se
M8459Se
M8460Se
M8465Se
CT4i Series
CT408i
CT412i
LM4e Series
LM408e
LM412e
S84 Series
S8408
S8412
S8424
M10e Series
M10e
GL4e Series
GL408e
GL412e
MB2i Series
MB200i
MB4i Series
MB400i
MB410i
TG3e Series
TG308e
TG312e
CL4NX Series
CL4NX 203 dpi
CL4NX 305 dpi
CL4NX 609 dpi
1
SATO CUPS Driver for Mac OS X 6-29
User Manual
S84ex/S86ex
S84ex 203 dpi
S84ex 305 dpi
S84ex 609 dpi
S86ex 203 dpi
S86ex 305 dpi
CL6NX Series
CL6NX 203 dpi
CL6NX 305 dpi
CL4NX-J Series
CL4NX-J 203 dpi
CL4NX-J 305 dpi
CL4NX-J 609 dpi
CL6NX-J Series
CL6NX-J 203 dpi
CL6NX-J 305 dpi
WS4
WS408 DT/TT
WS412 DT/TT
PW208
PW208NX
PW208mNX
1.2 Printer Properties/Options
The driver supports printer’s the following settings below. Please take note that the setting
varies depending on the printer model. For more information, refer to the printer specifications.
Property
Description
Media Size
Sets the media size. Units in inches.
B&W
Conversion
Allows user to select dither options for improved printing image quality.
The choices are:
- Dither (default) will be used for images.
- Threshold (50%) will give sharp edges for text and bar codes.
- Threshold (75%) will give sharp edges for text and bar codes, darker
than 50%.
- Threshold (25%) will give sharp edges for text and bar codes, lighter
than 50%.
Sensor Type
Specifies the selection of the transparent sensor or the
reflection sensor
Print Method
Sets the Print method/type such as Thermal Type and Direct Thermal
Type
Resolution
Sets the print density
Print Speed
Sets the print speed
Darkness Range
Sets the print darkness. The print density parameter can be specified
in six options from “A” to “F”.
Darkness Level
Sets the print darkness level. The print density level parameter can be
specified in five options from “1” to “5”
Print Mode
Sets the operation mode such as Continuous, Tear Off, Cutter and
Dispenser Operation
Cutter
Sets the cutter options. This is only applicable for printer units with
cutter. Cutter Operation Mode should also be selected to make it work
Vertical Offset
Sets the start position coordinate. Specifies the vertical start position
correction signal. Units in inches
Horizontal Offset
Sets the start position coordinate. Specifies the horizontal start position
correction signal. Units in inches
SATO CUPS Driver for Mac OS X 7-29
User Manual
System Requirements
The minimum system requirements for the SATO CUPS Driver for Mac OS X are:
Mac with Mac OS X with CUPS 1.5 or higher
At least one supported model of SATO printer that can connect to the Mac
Figure 1 Overview
CUPS
(for Mac OS X)
User
- CUPS creates a
queue to keep track
of the current status
of the printer
- Filters (which include
printer drivers and
port monitors) and
backends are used
to convert job files to
a printable format
and send that data
to the printer itself.
- Communicate with
printers using LAN,
USB, LPT or RS232
- Bluetooth
communication not
yet supported.
- The complexities
of configuration
and Printer
language
commands are
hidden from users
- User will see the
printer
configuration for
various models of
SATO printers.
SATO Printers
2
SATO CUPS Driver for Mac OS X 8-29
User Manual
3.1 Installing the Driver
After obtaining the packages perform the following actions below.
Note: The screenshots may look different depending on the Mac OS X Distribution you are
using.
1) Locate the package file (.pkg) and run it.
2) The Installation wizard will appear on the screen. Click the Continue button to proceed to
the next step.
3) Click the Continue button after reading the Read Me text
3
SATO CUPS Driver for Mac OS X 9-29
User Manual
4) Click Continue and Agree to proceed to the next step.
5) On the installation wizard screen, click Install to confirm the installation.
Loading...