SARGENT 8200 User Manual
INSTALLATION INSTRUCTIONS
2.175
1.482
.040 x45∞ Angle
Ø.558 Dia.
Ø.625 Dia.
.187
.067
.268
5/8-18UNF-2A Thread
.3155 SQUARE
.3135
.4375 MIN ACROSS CORNERS
.007 MAX Radius
.4375 MIN ACROSS CORNERS
.3155 SQUARE
.3135
4 CORNERS
4 CORNERS
.007 MAX Radius
.075
.236
.435
.960
1.735
Ø.3445 Dia. BRASS/BRONZE
Ø.372 Dia. MAX STAINLESS
Ø.3445 Dia. BRASS/BRONZE
Ø.372 Dia. MAX STAINLESS
Ø.564 Dia.
Ø.757 Dia.
1/4-28 UNF-2B Thread
Ø.990 MIN Dia. Ø.990 MIN Dia.
OUTSIDE LEVER
WHEN BY OTHERS
INSIDE LEVER
WHEN BY OTHERS
2
12*
3
4
6
7
5
9
10
11
1
Shape of this mounting plate
w
ill vary depending on the
trim design used
Shape of this mounting plate
will vary depending on the
trim design used
12*
7
8
Trim Mounting Kit on 8200 Lever Mortise Locksets
FOR INSTALLATION ASSISTANCE CALL SARGENT AT 1-800-727-5477 • www.sargentlock.com
STANDARD 8200 MORTISE LOCKSET SHOWN
Please Note: Refer to the following instruction sheets for
complete lock installation.
· LN or L Trim - A7035
· LE or LW Trim - A7031
· LS Trim - A7029
· WT Trim - A7034
* Insert (2) springs, large end first, into spindle hole in levers.
PARTS LIST DESCRIPTION
A.) Inside Trim Pack consisting of:
. Lever set screws (2) [1 long, 1 short]
1
2. Lever Adapter
3. Machine screws #8-32 x 5/8” (2)
4. Adapter and plate assembly (2)
5. Washers (2)
6. Cap Nut
7. Spindles (2)
NOTE: Items 2, 4, 5 and 6 are pre-assembled
when shipped.
B.) Outside Trim Pack consisting of:
8. Cap Nut
9. Washers (2)
10. Adapter and plate assembly
11. Mounting Posts (2)
12. Spindle Springs (2)
C.) Complete trim pack consisting of:
Both inside trim pack (A) and outside
trim pack (B) together
IF USING NON SARGENT LEVERS THEY MUST BE MANUFACTURED TO MEET THE
FOLLOWING SPECIFICATIONS
Inside Lever Requirements/Specifications:
IMPORTANT NOTE: UNLESS OTHERWISE SPECIFIED ALL TOLERANCE TO BE + OR - .005
LEVER WEIGHT AND CONFIGURATION (center of gravity - cg) MUST NOT APPLY A MAXIMUM LEVER
TORQUE THAT EXCEEDS 1.4 in-lbs.
Outside Lever Requirements/Specifications:
Copyright © 2009, Sargent Manufacturing Company,
an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
A5759B
Loading...