Samsung VP-D73, VP-D73i, VP-D75, VP-D75i, VP-D76 User Manual
...
ENGLISH
Digital Video Camcorder
AF
Auto Focus
CCD
Charge Coupled Device
LCD
Liquid Crystal Display
Owner’s Instruction Book
Before operating the unit, please read this instruction book
thoroughly, and retain it for future reference.
ELECTRONICS
This product meets the intent of
Directive 89/336 CEE, 73/23 CEE, 93/68 CEE.
VP-D73/D75/D76/D77
VP-D73
i/D75i/D76i/D77i
START/
STOP
SELF
TIMER
X2
SLOW
F.ADV
A.DUB
ZERO
MEMORY
WIDE
TELE
STILL
PHOTO DISPLAY
Features................................................................................................................................................................................................................................................................ ....................... 9
Accessories Supplied with your camcorder.............................................................................................................................................................................................................................. 10
Descriptions
FRONT & LEFT VIEW....................................................................................................................................................................................................................................................... 11
LEFT SIDE VIEW.............................................................................................................................................................................................................................................................. 12
RIGHT & TOP VIEW ........................................................................................................................................................................................................................................................ 13
REAR & BOTTOM VIEW .................................................................................................................................................................................................................................................. 14
REMOTE CONTROL........................................................................................................................................................................................................................................................ 15
OSD (On Screen Display)................................................................................................................................................................................................................................................. 16
How to use the Remote Control .............................................................................................................................................................................................................................................. 18
Lithium Battery installation ........................................................................................................................................................................................................................................................ 19
Adjusting the Hand Strap and Shoulder Strap......................................................................................................................................................................................................................... 20
Connecting a Power Source .................................................................................................................................................................................................................................................... 21
Using the Lithium Ion Battery Pack............................................................................................................................................................................................................................................22
Inserting and Ejecting a Cassette............................................................................................................................................................................................................................................. 25
Making your First Recording..................................................................................................................................................................................................................................................... 26
Hints for Stable Image Recording............................................................................................................................................................................................................................................. 28
Adjusting the LCD ..................................................................................................................................................................................................................................................................... 29
Using the VIEWFINDER........................................................................................................................................................................................................................................................... 29
Playing back a tape you have recorded on the LCD ................................................................................................................................................................................................................ 30
Controlling Sound from the Speaker......................................................................................................................................................................................................................................... 31
Using the various Functions
Setting the menu item ....................................................................................................................................................................................................................................................... 32
Availability of functions in each mode ............................................................................................................................................................................................................................... 33
LCD ADJUST .................................................................................................................................................................................................................................................................... 34
CUSTOM SET................................................................................................................................................................................................................................................................... 34
DIS..................................................................................................................................................................................................................................................................................... 35
PIP................................................................................................................................................................................................................................................................ ..................... 36
Zooming In and Out with DIGITAL ZOOM ........................................................................................................................................................................................................................ 37
PROGRAM AE.................................................................................................................................................................................................................................................................. 39
DSE (Digital Special Effects)............................................................................................................................................................................................................................................. 40
WHITE BALANCE............................................................................................................................................................................................................................................................. 42
SHUTTER................................................................................................................................................................................................................................................................ .......... 43
IRIS.................................................................................................................................................................................................................................................................................... 44
REC MODE....................................................................................................................... ................................................................................................................... 45
REC LAMP ...........................................................................................................................................................................................................................................46
ENGLISH
2
Contents
Preparing
Advanced Recording
Basic Recording
Notices and Safety Instructions
.............................................................................................................................................................................. 4
Getting to Know Your Camcorder
WIND CUT 46
AUDIO MODE.......................................................................................................................................................................................................................................47
DISPLAY
.......................................................................................................................................................................................................................................................................... 48
DATE/TIME
...................................................................................................................................................................................................................................................................... 49
DEMO
............................................................................................................................................................................................................................................................................... 50
CLOCK SET
.................................................................................................................................................................................................................................................................... 51
Easy mode
.............................................................................................................................................................................................................................................................................. 52
Custom mode
......................................................................................................................................................................................................................................................................... 53
MF/AF(Manual Focus/Auto Focus)
............................................................................................................................................................................................................. 54
BLC
.............................................................................................................................................................................................................................................................. 55
Fade In and Out
...........................................................................................................................................................................................................................................56
Audio dubbing
..............................................................................................................................................................................................................................................57
PHOTO
.........................................................................................................................................................................................................................................................59
Using the video light.................................................................................................................................................................................................................................... 61
Lighting T echniques
..................................................................................................................................................................................................................................... 62
Various Recording Techniques
.................................................................................................................................................................................................................... 63
To watch with the LCD
................................................................................................................................................................................................................................. 64
To watch with a TV monitor
........................................................................................................................................................................................................................ 64
Playback
.......................................................................................................................................................................................................................................................65
Various Functions in PLAYER mode
........................................................................................................................................................................................................... 66
After finishing a recording
............................................................................................................................................................................................................................ 88
Cleaning and Maintaining the Camcorder
.................................................................................................................................................................................................. 89
3
ENGLISH
Contents
Playing back a Tape
Using Your Camcorder Abroad
............................................................................................................................................................................ 90
Troubleshooting
.......................................................................................................................................................................................................... 91
Specifications
.............................................................................................................................................................................................................. 94
Index
.............................................................................................................................................................................................................................. 96
IEEE 1394 Data Transfer
.......................................................................................................................................................................................... 69
USB interface
.............................................................................................................................................................................................................. 71
Digital Still Camera mode
(VP-D75(i)/D76(i) /D77(i) only)
.................................................................................................................................... 75
Maintenance
................................................................................................................................................................................................................. 88
Power Source (United Kingdom Only)
.............................................................................................................................................................. 97
ENGLISH
4
Please rotate the LCD screen carefully as illustrated. Unintended rotation may cause damage to the inside of the hinge that connects
the LCD screen to the Camcorder.
1. LCD screen closed.
2. Standard recording by using the LCD screen.
3. Making a recording by looking at the LCD screen from the top.
4. Making a recording by looking at the LCD screen from the front.
5. Making a recording with the LCD screen closed.
Notices and Safety Instructions
Notices regarding rotation of LCD screen
1
2
3
4
5
90°
90°
90°
90°
5
ENGLISH
Notices and Safety Instructions
Notices regarding moisture condensation
1. A sudden rise in atmospheric temperature may cause condensation to form inside the camcorder.
for example:
- When you move the camcorder from cold outside to warm inside during the winter.
- When you move the camcorder from cool inside to hot outside during the summer.
2. If the “DEW” protection feature is activated, leave the camcorder for at least two hours in a dry, warm room with the cassette compartment
opened and the battery removed.
Notices regarding COPYRIGHT
Television programs, video tapes, DVD titles, films, and other program materials may be copyrighted.
Unauthorized copying of copyrighted material may be against the law.
Notices regarding CAMCORDER
1. Do not leave the camcorder exposed to high temperature(above 60˚C or 140˚F).
For example, in a parked car in the sun or under direct sunlight.
2. Do not let the camcorder get wet.
Keep the camcorder away from rain, sea water, and any other form of moisture. If the camcorder gets wet, it may be damaged.
Sometimes malfunction cannot be repaired.
- Make sure the battery pack is fully charged before recording starts.
- To preserve battery power, keep your camcorder
turned off when you are not operating it.
- When your camcorder is in CAMERA mode, if it is left in STBY mode without operation for
more than 5 minutes with a tape installed, it will automatically turn off to protect against
unnecessary battery discharge.
- Make sure that the battery pack is fitted firmly into place.
Dropping the battery pack may damage it.
- A brand new battery pack is not charged.
Before using the battery pack, charge it completely.
- It is a good idea to use the viewfinder instead of the LCD when recording for a long time,
because the LCD uses up more battery power.
ENGLISH
6
Notices and Safety Instructions
*When the battery reaches the end of its life, please contact your local dealer.
The batteries have to be dealt with as chemical waste.
Notices regarding the battery pack
Notices regarding video head cleaning
- To ensure normal recording and a clear picture, clean the video heads reguarly. If a square block-shaped noise distorts playback pictures,
or if only a blue screen is displayed during playback, the video heads may be dirty. If this happens, clean the video heads with a dry type
cleaning cassette.
- Do not use a wet type cleaning cassette. It may damage the video heads.
ENGLISH
- Do not film with the camera lens pointing directly at the sun.
Direct sunlight can damage the CCD(Charge Coupled Device).
1. Do not position the camcorder such that the viewfinder is pointing towards the sun.
Direct sunlight can damage the inside of the viewfinder.
Be careful when placing the camcorder under sunlight or by a window.
2. Do not pick up the camcorder by the viewfinder.
3. Over-rotation of the viewfinder may damage it.
1. The LCD display is manufactured using high precision technology.
However, there can be tiny dots(red, blue or green in colour) that appear on the LCD display.
These dots are normal and do not affect the recorded picture in any way.
2. When you use the LCD display in direct sunlight or outdoors, it may be difficult to see the
picture.
If this occurs, we recommend that the viewfinder is used.
3. Direct sunlight can damage the LCD monitor.
- To ensure a steady picture during filming, check that the hand strap is properly adjusted.
- Do not force your hand into the hand strap as you could damage it.
7
Notices and Safety Instructions
Notice regarding the LENS
Notices regarding Record or Playback using LCD
Notices regarding the hand strap
Notices regarding electronic viewfinder
ENGLISH
8
ENGLISH
Notices and Safety Instructions
Precautions regarding the Lithium battery
Notice regarding VIDEO LIGHT
Warning: Keep the LITHIUM BATTERY out of the reach of children. Should any battery be swallowed, consult a doctor immediately.
1. The lithium battery maintains the clock function and user settings; even if the battery pack or AC adapter is removed.
2. The lithium battery for the camcorder lasts about 6 months under normal operation from time of installation.
3. When the lithium battery becomes weak or dead, the date/time indicator will flash for about five seconds when you set the power switch to
CAMERA.
In this case, replace the lithium battery with a new one(type CR2025 ).
Dang
er:
The video light can become extremely hot. Do not touch it during operation or after turning it off, otherwise serious injury may result.
Take 5 minutes (approx.) for the light to cool down.
Do not place the camcorder into the carrying case immediately after using the video light. The video light will be hot.
Please allow time for it to cool down.
Do not use near flammable or explosive materials.
It is recommended that you consult your nearest SAMSUNG dealer for replacement bulbs.
DANGER - NOT TO BE HANDLED BY CHILDREN.EMITS INTENSE HEAT AND LIGHT.USE WITH CAUTION TO REDUCE THE RISK OF
FIRE OR INJURY TO PERSONS.DO NOT DIRECT LIGHT AT PERSONS OR MATERIALS FROM LESS THAN FOUR FEET
DURING USE AND UNTIL COOL. DISCONNECT WHEN NOT IN USE.
DANGER - TO PREVENT POSSIBLE BURN HAZARD, DISCONNECT SUPPLY CORD AND ALLOW LAMP TO COOL BEFORE REPLAC-
ING.
9
ENGLISH
Getting to Know Your Camcorder
•
Digital data transfer function with IEEE1394
By incorporating IEEE 1394 (i.LINKTM: i.LINK is a serial data transfer protocol and interconnection system, used to transmit DV data) high speed data
transport port, moving and still images can be transferred to PC, making it possible to produce or edit various images.
(VP-DXXi is able to record and receive digital data from another DV Device.
VP-DXX is not able to record and receive digital data from another DV Device.)
•
USB interface for digital image data transfer
You can transfer standstill images and short video clip to PC using the USB interface without any add-on card.
•
PHOT O
The PHOTO function lets you capture an object as a still along with sound, while in Camera mode.
•
500x Digital zoom
Allow you to magnify an image to up to 500 times its original size.
•
Colour TFT LCD
A high-resolution colour TFT LCD (with 112,320 pixels) gives you clean, sharp images as well as the ability to review your recordings immediately.
•
Digital Image Stabilizer
The DIS compensates for handshake, reducing unstable images particularly at high magnification.
•
Various digital effects
The DSE (Digital Special Effects) allows you to give your films a special look by adding various special effects.
•
Back Light Compensation ( BLC )
When you record a subject with the light source behind it or a subject with a light background, the BLC function compensates for the bright background.
•
Program AE
The Program AE enables you to alter the shutter speed and aperture to suit the type of scene/action to be filmed.
•
Digital Still Camera function (VP-D75(i)/D76(i)/D77(i) only)
■
Using the built-in 4MB memory (VP-D75(i) only) or Smart Media Card (VP-D76(i)/D77(i) only), you can easily record and playback standstill images.
■
You can transfer standstill images on the built-in memory or Smar t Media Card to PC using USB interface.
Features
ENGLISH
10
Getting to Know Your Camcorder
Make sure that the following basic accessories are supplied
with your digital video camera.
Accessories Supplied with camcorder
1. Lithium Ion Battery pack
2. AC Power Adapter
3. AC cord
4. AUDIO/VIDEO cable
5. Instruction Book
6. Shoulder Strap
7. Lithium batteries for Remote Control and Clock.
(TYPE: CR2025,2 EA)
8. S-VIDEO cable
9. Remote Control
10. Scar t adapter
11. USB cable
12. Software CD/Instruction Book
13. Smar tMediaCard
(VP-D76(i)/D77(i) only)
Basic Accessories
1. Lithium Ion Battery pack
3. AC cord
4. AUDIO/VIDEO cable
9. Remote Control
8. S-VIDEO cable7. Lithium batter ies
(2EA)
5. Instruction Book
2. AC Power Adapter
6. Shoulder Strap
START/
STOP
SELF
TIMER
X2
SLOW
F.ADV
A.DUB
ZERO
MEMORY
WIDE
TELE
STILL
PHOTO DISPLAY
Digital Video Camcorder
10. Scart adapter
13. SmartMedia Card
11. USB cable 12. Software
CD/Instruction Book
START/
WIDE
PHOTODISPLAY
STOP
SELF
ZERO
A.DUB
TIMER
MEMORY
TELE
STILL
X2
SLOW
F.ADV
11
ENGLISH
Getting to Know Your Camcorder
Front & Left View
1. Lens
2.
REC lamp
3.
Remote sensor
4.Video Light
5. Hook for hand strap
6. Internal MIC
11.Viewfinder
10.TFT LCD monitor
9. EASY button
8. CUSTOM button
7. Mode switch
(VP-D75(i)/D76(i)/D77(i) only)
1. Lens
2. REC lamp
3. Remote sensor
4. Video Light (see page 61)
5. Hook for hand strap (see page 20)
6. Internal MIC
7. Mode switch: CAMCORDER DSC (see page 21)
(VP-D75(i)/D76(i)D77(i) only)
8. CUSTOM button (see page 53)
9. EASY button (see page 52)
10. TFT LCD monitor
11. Viewfinder (see page 29)
↕
ENGLISH
12
Getting to Know Your Camcorder
Left Side View
1. Function Keys
*VP-D73(i)
*VP-D75(i)/D76(i)/D77(i)
3. SPEAKER
2. Card Eject Switch
(VP-D76(i)/D77(i) only)
PLAYER CAMERA
DSC PLAYER
(VP-D75(i)/D76(i)/D77(i) only)
: (STOP) BLC
(see page 55)
DELETE
(see page 83)
: (REW) EDIT – : MEM.–
: (PLAY/STILL) FADE
(see page 56)
: SLIDE
(see page 81)
: (FF) EDIT + : MEM.+
: (SLOW) MF/AF
(see page 54)
STOP REW
PLAY/STILL
FF SLOW
BLC EDIT— FADE EDIT+ MF/AF
DELETE
BLC EDIT— FADE EDIT+ MF/AF
2. Card Eject switch (see page 77)
(VP-D76(i)/D77(i) only)
3. Speaker
1. Function Keys
13
ENGLISH
Getting to Know Your Camcorder
Right & Top View
8. OPEN/EJECT button
7. Audio/Video out
6. External MIC in
5. DV IN/OUT:VP-DXX
i
DV OUT: VP-DXX
4. S-VIDEO out
1. Zoom lever and Volume control
2. PHOTO button
3. Power switch
(CAMERA or PLAYER)
1. Zoom lever and Volume control (see page 31, 37)
2. PHOTO button (see page 59)
3. Power switch (CAMERA or PLAYER) (see page 21)
4. S-VIDEO out
5. DV IN/OUT:VP-DXX
i (see page 70)
DV OUT: VP-DXX
6. External MIC in (see page 57)
7. Audio/Video out
8. OPEN/EJECT button (see page 25)
ENGLISH
14
Getting to Know Your Camcorder
Rear & Bottom View
11. Battery Release button
10. START/STOP button
13. CARD slot
(VP-D76(i)/D77(i) only)
12. Lithium Battery
Holder
1. Charging indicator
2. MENU ON/OFF button
3. ENTER/DISPLAY button
4. MENU DIAL
5. LCD open
6. LIGHT switch
7. Hook for shoulder strap
8. USB jack
9. DC jack
1. Charging indicator (see page 22)
2. MENU ON/OFF button (see page 32)
3. ENTER/DISPLAY button
4. MENU DIAL (see page 32)
5. LCD open
6. LIGHT switch (see page 61)
7. Hook for shoulder strap
8. USB jack (see page 74)
9. DC jack (see page 21)
10. START/STOP button (see page 26)
11. Battery Release button (see page 88)
12. Lithium Battery holder (see page 19)
13. CARD slot (VP-D76(i)/D77(i) only)
15
Getting to Know Your Camcorder
ENGLISH
Remote control
1. PHOTO
2. START/STOP
3. SELF TIMER
4. ZERO MEMORY
5. (FF)
6. (REW)
7. (PLAY)
8.X2
9. (SLOW)
16. DISPLAY
15. Zoom WIDE
14. Zoom TELE
13. A.DUB
12. (STILL)
11. (ST OP)
10. Frame Advance
1. PHOTO
2. START/STOP
3. SELF TIMER (see page 18)
4. ZERO MEMORY (see page 68)
5. (FF)
6. (REW)
7. (PLAY)
8. X2 (see page 67)
9. (SLOW)
10. Frame Advance (see page 67)
11. (STOP)
12. (STILL)
13. A.DUB (see page 57)
14. Zoom TELE
15. Zoom WIDE
16. DISPLAY (see page 17)
START/
STOP
SELF
TIMER
X2
PHOTO DISPLAY
MEMORY
SLOW
WIDE
ZERO
A.DUB
TELE
STILL
F.ADV
ENGLISH
16
Getting to Know Your Camcorder
OSD (On Screen Display in Camcoder mode)
1. Battery level (see page 24)
2. Zoom position (see page 37)
3. Manual focus (see page 54)
4. DSE (Digital Special Effect) mode (see page 40)
5. White Balance mode (see page 42)
6. Shutter speed and IRIS (see page 43, 44)
7. Audio record mode (see page 47)
8. Self record and waiting timer (see page 18)
9. WIND CUT(see page 46)
10.DATE/TIME (see page 49)
11.Self diagnosis (see page 91)
12.DEW condensation (see page 91)
13.PIP (Picture in Picture) (see page 36)
14.Photo (see page 59)
15.Digital zoom mode (see page 38)
16.Remaining Tape (measured in minutes)
17.Tape counter
18. Zero memory indicator (see page 68)
19.Operating mode
20.Record speed mode (see page 45)
21.Light ON (see page 61)
22.Custom or Easy mode (see page 52, 53)
23.DIS (Digital Image Stabilizer) (see page 35)
24.Program AE (see page 39)
25.BLC (Back Light Compensation) (see page 55)
26.Volume control (see page 31)
27.Audio playback channel (see page 58)
28.Audio playback mode
29.DV IN (VP-D
XXi only) (DV data receiving mode) (see page 70)
30.A. DUB (see page 57)
OSD in CAMCORDER RECORD mode
OSD in CAMCORDER PLAYBACK mode
WAIT-10S
CUSTOM
SP STBY
MIRROR PHOTO
OUTDOOR
1/500
TAPE
M.FOCUS 100 MIN
DEW
PIP
23:30
SELF-30S
31.DEC.2001
500 0:00:00
18
17
16
15
14
13
12
11
10
1
2
3
4
5
6
25 24 23 22 21 20 19
W
BLC
T M
x
I 29
W.CUT
USB
9
I
8
16BIT
7
20 19
1
13
11
26
SOUND2
27
16BIT 31.DEC.2001
28
DEW
TAPE
VOLUME
0 16 31
USB
SP STILL
0:00:00:00
100 MIN
A.DUB
DV IN
23:30
41
17
16
30
29
10
17
ENGLISH
Getting to Know Your Camcorder
OSD (On Screen Display in DSC mode)
✤
These items are available in VP-D75(i)/D76(i)/D76(i) models only.
31. Folder number-file number (see page 78)
32. Message line (see page 92)
33. Photo mode (FRAME/FIELD) (see page 79)
34. Image counter
- Current still image/Total number of recordable still images.
34. CARD (memory) indicator
36. Image recording and loading indicator (see page 76)
37. Image counter
- Current still image/Total number of recorded still images.
38. SLIDE SHOW indicator (see page 81)
39. ERASE PROTECT indicator (see page 82)
40. DPOF mark (see page 84)
41. USB (see page 71)
✤
When you set the power switch to CAMERA, and the OSD is automatically turned on.
✤
When you set the power switch to PLAYER, and the OSD is automatically turned off.
✤ Refer to page 48.
•
Turning OSD on/off
Press the ENTER (DISPLAY) button on the rear side panel.
- Each press of the button toggles the OSD function on and off.
- When you turn the OSD off,
In CAMERA mode:You only see those features being used.
In PLAYER mode: All OSD messages flash for 3 seconds then disappear.
•
Turning on/off the DATE/TIME
- The DATE/TIME is not affected when the OSD function is switched ON or OFF.
- To turn the DATE/TIME on or off, access the menu and change the DATE/TIME mode.
(see page 49 )
Turning the OSD on/off (On Screen Display)
OSD in DSC RECORD mode
OSD in DSC PLAYBACK mode
NO STORED IMAGE
MEM.EASY
MIRROR FIELD
OUTDOOR
1/500
M.FOCUS 22/67
PIP
23:30
31.DEC.2001
500 STBY
35
34
33
32
36
W
BLC
T
E
x
USB
I 29
40
39
P
DP0F000
DEW
NO STORED IMAGE
000-0000 31.DEC.2001
31
USB
41
MEM.
SLIDE
10/22
23:30
38
37
ENGLISH
18
Getting to Know Your Camcorder
✤ You must insert or replace the lithium battery when :
- You purchase the camcorder.
- The remote control doesn’t work.
✤ Ensure that you insert the lithium cell correctly, following the + and – markings.
✤ Be careful not to reverse the polarity of the battery.
Self Record using the Remote Control
The Self-Timer function on the remote control allows you to start and stop recording automatically.
Example:
Scene with all members of your family
Two options are available
■
WAIT-10S/SELF-30S: 10 seconds wait, 30 seconds of recording.
■
WAIT-10S/SELF-END: 10 seconds wait, records until you press the START/STOP button again.
1. Set the camcorder to CAMERA mode.
2. Press the SELF TIMER button until the appropriate indicator is displayed in the viewfinder :
■
WAIT-10S/SELF-30S
■
WAIT-10S/SELF-END
3. Press the START/STOP button to start the timer.
: After a 10 second wait, recording starts.
: If you have selected SELF-30S, recording stops automatically after 30 seconds.
: If you have selected SELF-END, press START/STOP again when you wish to stop recording.
How to use the Remote Control
Battery Installation for the Remote Control
START/
STOP
SELF
TIMER
X2
SLOW
F.ADV
A.DUB
ZERO
MEMORY
WIDE
TELE
STILL
PHOTO DISPLAY
SELF
TIMER
19
ENGLISH
✤ The lithium battery maintains the clock function and preset contents of the memor y; even if the battery pack or AC power adapter is removed.
✤ The lithium battery for the camcorder lasts about 6 months under normal operation from the time of installation.
✤ When the lithium battery becomes weak or dead, the date/time indicator flashes for about 5 seconds when you set the power switch to CAMERA.
In this case, replace the lithium battery with CR2025 type.
1. Remove the Lithium battery holder from the camera.
2. Position the Lithium cell in the holder, with the positive ( ) terminal face down.
3. Reinsert the holder into the lithium batter y compartment.
Reference The holder must be inserted in the correct direction or it will not fit properly.
Warning: Keep the LITHIUM BATTERY out of the reach of the children.
Should any battery be swallowed, consult a doctor immediately.
Lithium Battery Installation
Preparing
It is very important to ensure that the Hand strap is correctly adjusted before you begin your recording.
The hand strap enables you to :
- Hold the camcorder in a stable, comfortable position.
- Press the Zoom and START/STOP button without having to change the position of your hand.
a. Pull open the Hand Strap cover and release the Hand Strap.
b. Adjust its length and stick it back onto the Hand Strap cover.
c. Close the Hand Strap cover back up again.
The Shoulder Strap enables you to carry your camcorder around in complete safety.
1. Insert the end of strap into the Shoulder Strap hook on the camcorder.
Insert the other end of strap into ring inside hand strap.
2. Thread each end into the buckle, adjust the length of the strap and then pull it tight in the buckle.
ENGLISH
20
Adjusting the Hand Strap and Shoulder Strap
Hand strap
Shoulder Strap
Preparing
a
c
b
12
There are two types of power source that can be connected to your camcorder.
- The AC Power Adapter and AC cord : used for indoor recording.
- The battery Pack : used for outdoor recording.
To use the AC Power adapter and DC Cable
1. Connect the AC Power adapter to the AC cord.
2. Connect the AC cord to a wall socket.
Reference The plug and wall socket type may be different depending on the
country you’re in.
3. Connect the DC cable to the DC jack socket of the camcorder.
4. Set the camcorder to the CAMERA or PLAYER mode by holding down
the tab on the power switch and turning it to the CAMERA or PLAYER position.
To select the mode of CAMCORDER (VP-D75(i)/D76(i)/D76(i) only)
✤ If you want to use this camcorder as the camcorder, set the mode switch to
CAMCORDER position.
✤ If you want to use this camcorder as the DSC (Digital Still Camera),
set the mode switch to DSC position.
21
ENGLISH
Preparing
Connecting a Power Source
2
1
3
4-a
CAMERA
4-b
PLAYER
DSC
CAMCORDER
ENGLISH
22
✤ The amount of continuous recording time available depends on :
- The type and capacity of battery pack you are using.
- How much you use the Zoom function.
It is, recommended that you have several batteries available.
Charging the Lithium Ion Battery Pack
1. Lift the viewfinder up and attach the battery pack to the camcorder.
2. Connect the AC Power adapter to an AC cord and connect the AC cord to a wall socket.
3. Connect the DC cable to the DC jack socket on the camcorder.
4. Turn the Camera power switch to off, the charging indicator will start to flash showing
that the battery is charging.
5. When it has finished charging, disconnect the battery and AC Power adapter from the camcorder.
- Even with the power switched off, the battery will still discharge is left connected to the camcoder.
Reference
■
The battery pack may be charged a little at the time of purchase.
■
To prevent reduction in the life and capacity of the battery pack, always remove it from the camcorder after it is fully charged.
To use the Lithium Ion Battery Pack
Using the Lithium Ion Battery Pack
Preparing
Blinking time Charging rate
Once in a second Less than 50%
Twice in a second 50% ~ 75%
Three times in a second 75% ~ 100%
On for a second and Error - Reset the battery and
off for a second DC cable.
2
1
3
4
23
ENGLISH
Preparing
Using the Lithium Ion Battery Pack
✤ If you close the LCD screen, it switches off and the EVF switches on automatically.
✤ The continuous recording times given in the table are approximate.
Actual recording time depends on usage.
✤ If you turn on the LIGHT, the recording time becomes very shor t.
Reference
■
The battery pack should be recharged in an environment of between 32°F (0°C) and 104°F (40°C).
It should never be charged in a room temperature that is below 32°F (0°C).
■
The life and capacity of the battery pack will be reduced if it is used in temperatures below 32°F (0°C) or left in temperatures above 104°F (40°C)
for a long period, even when it is fully recharged.
■
Do not put the battery pack near any heat source (fire or flames, for example).
■
Do not disassemble, process, pressure, or heat the Battery Pack.
■
Do not allow the + and – terminals of the battery pack to be short-circuited.
It can cause leakage, heat generation, induction of fire and over heating.
Table of continuous recording time based on model and battery type.
Battery
SB-L110
SB-L220
Charging
time
Approx.
2hr
Approx.
3hr 30min
LCD ON EVF ON
Continuous recording time
Time
Approx.
1hr 10min
Approx.
2hr 20min
Approx.
1hr 30min
Approx.
3hr
ENGLISH
24
•
The battery level display indicates the amount of power remaining in the battery pack.
a. Fully charged
b. 10% used
c. Half used
d. Mostly used
e. Completely used (flickers)
(camcorder will turn off soon, change the battery as soon as possible)
✤ Please refer to the table on page 23 for approximate continuous recording times.
✤ The recording time is affected by environmental temperature and conditions.
The recording time becomes very short in a cold
environment.The continuous recording time in the operating instructions is measured using a fully charged
battery pack at 77°F(25°C). As the environmental temperature and conditions may be different when you
actually use the camcorder, the remaining battery time may not be the same as the approximate continuous
recording times given in these instructions.
Tips for Battery Identification
A charge mark is provided on the battery pack to help you remember whether it has been charged or not.
Two colours are provided (red and black)-you may choose which one indicates charged and which indicates
discharged.
Battery level display
Preparing
a
b
c
d
e
✤ There are three types of Mini DV CASSETTE tapes: DVM80, DVM60 and DVM30.
✤ When inser ting a tape or closing a cassette holder, do not apply excessive force. It can cause a malfunction.
✤ Do not use tapes other than Mini DV CASSETTE.
1. Connect a power source and slide the OPEN/EJECT button the camcorder forwards and
open the cassette door.
- The cassette holding mechanism rises automatically.
2. Insert a tape into the cassette holder with the tape window facing outward and
the protection tab toward the top.
3. Press the area labelled PUSH on the cassette holding mechanism until it clicks into place.
- The cassette is loaded automaticcally.
4. Close the cassette door.
- The camcorder will not operate with the cassette door open.
Reference When you have recorded something that you wish to keep,
you can protect it so that it will not be accidentally erased.
a. Protecting a tape :
Push the safety tab on the cassette so that the hole is not covered.
b. Removing tape protection :
If you no longer wish to keep the recording on the cassette, push the protection tab back so that
it covers the hole.
•
How to keep a tape
a. Avoid places where there are magnets.
b. Avoid humidity-and-dust prone places.
c. Keep it in an upright position and avoid storing in direct sunlight.
d. Avoid dropping or knocking your tapes.
25
ENGLISH
Inserting and Ejecting a Cassette
Preparing
1
3
2
4
Tape window
Cassette holder
Cassette door
a. SAVE
b. REC
ENGLISH
26
Basic Recording
1. Connect a Power source.(see page 21)
(Battery pack or AC power adapter)
■
Insert a cassette. (see page 25)
2. Remove the LENS CAP and hook it onto the hand strap.
3. Set the power switch to the CAMERA position.
■
Set the mode switch to CAMCORDER position.(VP-D75(i)/D76(i)/D77(i) only)
■
Open the LCD monitor and make sure that STBY is displayed.
■
If the protection tab of the cassette is open, STOP will be displayed.
■
Make sure the image you want to record appears in the LCD monitor or viewfinder.
■
Make sure the battery level indicates that there is enough remaining power for your
expected recording time.
4. To start recording, press the START/STOP button.
- REC is displayed in the LCD.
To stop recording, press the START/STOP button again.
- STBY is displayed in the LCD.
Making your First Recording
1
2
4
3
27
ENGLISH
Basic Recording
Edit Search
When a cassette is loaded and the camcorder is left in the STBY mode for more than 5 minutes without being used, it will switch off automatically.
To use it again, push the START/STOP button or set the Power switch to OFF and then back to CAMERA.
This Auto Power off feature is designed to save battery power.
✤ You can view a recording using with the EDIT +, – function in STBY mode.
EDIT – enables you to play it backwords and EDIT + enables you to play it forwards, for as long as
you keep each button pressed.
.
✤ If you press the the EDIT – button quickly in STBY mode, your camcorder will play in reverse for
3 seconds and return to the original position automatically.
Reference
■
Mosaic shaped noise may appear on the screen during edit search mode.
EDIT +,
-
EDIT
-
ENGLISH
28
Basic Recording
Hints for Stable Image Recording
While recording, it is very important to hold the camcorder correctly.
Fix the LENS cap firmly by clipping it on the hand strap.(refer to figure)
1. Hold the camcorder firmly using the hand strap.
2. Place your right elbow against your side.
3. Place your left hand under or beside the LCD to support and adjust it.
Do not touch the built-in microphone.
4. Choose a comfortable, stable position for the shots that you are taking.
You can lean against a wall or on a table for greater stability. Do not forget to breathe gently.
5. Use the LCD frame as a guide to determine the horizontal plane.
6. Whenever possible, use a tripod.
1. Hold the camcorder firmly using the hand strap.
2. Place your right elbow against your side.
3. Place your left hand under the camcorder to support it.
Be sure not to touch the built-in microphone.
4. Choose a comfortable, stable position for the shots that you are taking.
You can lean against a wall or on a table for greater stability. Do not forget to breathe gently.
5. Place your eye firmly against the viewfinder eyecup.
6. Use the viewfinder frame as a guide to determine the horizontal plane.
7. Whenever possible, use a tripod.
Recording with the LCD monitor
Recording with Viewfinder
ENGLISH
Adjusting the LCD
✤ Your camcorder is equipped with a 2.5 inch colour Liquid Crystal Display(LCD) screen, which enables you to view
what you are recording or playing back directly.
✤ Depending on the conditions in which you are using the camcorder (indoors or outdoors for example), you can adjust ;
■
Brightness
■
Colour
1. Set the POWER switch to CAMERA or PLAYER position.
2. Open the LCD screen, the LCD switches on.
3. Press the MENU ON/OFF button.
4. Turn the MENU DIAL so that LCD ADJUST is highlighted.
5. Press ENTER to enter the sub-menu.
6. Turn the MENU DIAL so that it highlights the menu item
you want to adjust (BRIGHT, COLOUR).
7. Press ENTER again.
■
You can adjust the LCD using the MENU DIAL.
8. Press ENTER.
■
For further adjustment, repeat steps 6, 7, 8.
9. Press the MENU ON/OFF button to finish the setting.
Use the focus adjustment knob of the VIEWFINDER to focus the picture.(refer to figure )
Using the VIEWFINDER
Basic Recording
Adjusting the Focus
29
ON/OFF
ENTER
DISPLAY
MENU
(MENU) SP STBY
LCD ADJUST
CUSTOM SET
DIS............................OFF
PIP............................OFF
D.ZOOM...................OFF
PROGRAM AE .........AUTO
: MENU
●
LCD ADJUST ●SP STBY
BRIGHT I–00 18 36–I
COLOUR
RETURN
: MENU
ENGLISH
30
Basic Recording
Playing back a tape you have recorded on the LCD
✤ You can monitor the playback picture on the LCD monitor.
✤ Make sure that the battery pack is in place.
1. Hold down the tab of the Power switch and turn it to the PLAYER position.
2. Insert the tape you want to view.
3. Open the LCD screen and make sure that STOP is displayed.
Adjust the angle of the LCD screen and set the brightness or the colour if necessary.
4. Press the (REW) button to rewind the tape to the start point.
■
To stop REWIND, press the (STOP) button.
■
Camcorder stops automatically after rewinding.
5. Press the (PLAY/STILL) button to start playback.
■
You can see the picture you recorded on the LCD.
■
To stop the PLAY operation, press the (STOP) button.
Reference
■
You can also view the picture on a TV screen, after connecting the camcorder to a TV or VCR.(see page 64)
■
Various functions are availble in playback mode. (see page 66)
1
2
4
REW
PLAYER
Loading...