Samsung VP-D6050SI, VP-D6050I, VP-D6050, VP-D6040I, VM-D7500B User Manual [ko]
...
Camcorder Quick Start Guide
1. Attach the Battery Pack to the Camcorder.
2. Connect the AC Power Adapter to an AC Cord and connect
the AC cord to a wall socket.
3. Connect the DC Cable to the DC Jack Socket on the
Camcorder.
4. Turn the Camera Power Switch to off, and the charging indica-
tor will start to flash, showing that the battery is charging.
Battery charge time
SB - LS110 : Approx. 2hr
SB - LS220 : Approx. 3hr 30min
Connecting a Power Source
Preparation
Basic Recording
R
E
C
P
L
A
Y
OFFOFF
Power Switch
1 2
3
1. Insert the Lithium battery with the positive (+) terminal facing downward.
2. Insert a Cassette.
3. Select the appropriate OSD Language among English, French, Spanish, German
or Italian.
Press the MENU button.
Move the cursor to highlight INITIAL and press the OK button.
Using the DOWN button, select the LANGUAGE.
Press the OK button and select your language then press the OK button.
To exit, press the MENU button.
● CLOCK SET
Press the MENU button.
Move the cursor to highlight INITIAL and press the OK button.
The cursor is on the CLOCK SET menu. Press the OK button.
A blinking item indicates the item to be changed.
Using UP and DOWN button, change the value then press the OK button to
set.
The word COMPLETE! will appear, and a few seconds later, the menu
screen will automatically return to the sub menu.
1. Connect a Power source to the camcorder.
2. Remove the LENS COVER.
3. Set the Power Switch to the REC position.
4. To start recording, press the START/STOP button.
AD68-00779V
1
2
3 4
OFF
R
E
C
P
L
A
Y
OFFOFF
1
2
3
4
MENU button
OK button
UP button
DOWN button
1.Connect the camcorder to a TV with the AUDIO/VIDEO cable.
The yellow plug : Video
The white plug : Audio(L) - Mono
The red plug : Audio(R)
2. Set the Power Switch to the PLAY position.
3. Using the (FF) and (REW) buttons, find the first position
you wish to play back.
Press the (PLAY/STILL) button.
TAPE PLAYBACK
DSC Recording
DSC PLAYBACK
1 2
4
3
5
4
1. Turn the Power switch to OFF.
2. Insert the Memory Card into the Memory Card slot located on
the side of the Camcorder, in the direction of the arrow.
3. Set the Power Switch to
(CAMERA)
.
4. Turn the Mode Dial to the
(PROGRAM)
mode to take Still
Images.
To take motion clips, turn the Mode Dial to the
(MOVIE).
5. Still Image :
Press the PHOTO button to record a picture.
Motion Clip :
Press the START/STOP button to start
recording.
1. Turn the Power switch to OFF.
2. Insert the Memory Card into the Memory Card slot located on
the side of the Camcorder, in the direction of the arrow.
3. Set the Power Switch to
(CAMERA)
.
4. Turn the Mode Dial to the
(PLAY)
mode.
5. Still Image :
Using the 5-Way Button, browse your Still Images
.
MPEG4 : Press the (PLAY/STILL) button to start play
back. You can use the (FF) and (REW)
buttons during the MPEG play back.
Press the (STOP) button to stop the play back.
S-VIDEO
Multi-AV
AUDIO(R)
AUDIO(L)
VIDEO
1 2 3
OFF
OFF
OFF
STOP
STOP
FF
FF
REW
REW
PLAY/STILL
PLAY/STILL
MOVIE
MOVIE
PHOTO
PHOTO
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
1 2
5
3
5
4
5-Way Button
P
R
L
E
A
P
R
L
E
A
C
Y
OFF
C
Y
OFF
P
L
R
OFF
A
E
Y
C
R
P
E
L
C
A
Y
OFF
R
P
E
L
C
A
Y
OFF
Loading...