Samsung SVR-24PRT, SVR-960PRT Installation And Operating Instructions Manual

2

CONFIGUR-

ATION

CONFIGUR-

ATION

spill liquid of any kind on the unit.

16. Servicing - Do not attempt to service this unit yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.

17. Damage Requiring Service - Unplug the unit from the outlet and
refer servicing to qualified service personnel under the following
conditions:
a. When the power - supply cord. or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the
operating instructions, as an improper adjustment of other
controls may result in damage and will often required extensive
work by a qualified technician to restore the unit to its normal

operation.
e. If the unit has been dropped or the cabinet has been damaged.
f. When the unit exhibits a distinct change in performance this

indicates a need for service.

18. Replacement Parts - When replacement parts are required, be sure
the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other
hazards.

19. Safety Check - Upon completion of any service or repairs to this
unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.

20. Coax Grounding - If an outside cable system is connected to the
unit, be sure the cable system is grounded. U.S.A models only­Section 810 of the National Electrical Code, ANSI/NFPANo. 70­1981, provides information with respect to proper grounding of the
mount and supporting structure, grounding of the coax to a
discharge unit, size of grounding conductors, location of discharge
unit, connection to grounding electrodes, and requirements for the
grounding electrode.

21. Lightning - For added protection of this unit during a lightning storm
or when it is left unattended and unused for a long period of time,
unplug power cord form the wall.

FCC & ICES INFORMATION

(U.S.A and Canadian Models Only)
WARNING - This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules and ICES-003 of Industry Canada. These limits are designed to
provide reasonable protection against harmful interference when the
equipment is operated in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Intentional or unintentional changes or modifications not expressly
approved by the party responsible for compliance shall not be made.
Any such changes or modifications could void the user's authority to
operate the equipment.
The user may find the following booklet prepared by the Federal
Communications Commission helpful: "How to Identify and Resolve
Radio-TV Interference Problems". This booklet is available from the
U.S. Government Printing Office, Washington, DC 20402, Stock
No.004-000-00345-4.

Safety Precautions

This label may appear on the bottom of the unit due to
space limitations.

The lightning flash with an arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the unit's enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock to
persons.

The exclamation point within an
equilateral triangle is intended to alert
the user to presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.

Attention: Installation should be
performed by qualified service
personnel only in accordance with the
National Electrical Code or applicable
local codes.

Power Disconnect. Units with or
without ON-OFF switches have power
supplied to the unit whenever the power
cord is inserted into the power source;
however, the unit is operational only
when the ON-OFF switch is in the On
position. The power cord is the main
power disconnect for all units.

Securite

Cet étiquette peut apparaître en dessous de l'appareil
dû aux limitations d'espace.

L'éclair fléché dans un triangle
équilatéral avertit l'utilisateur de la
présence d'une haute tension non
isolée à l'intérieur de l'appareil. Elle peut
être d'une magnitude suffisante pour
constituer un risque d'électrocution.

Le point d'exclamation à l'intérieur d'un
triangle équilatéral avertit l'utilisateur de
la présence d'instructions importantes
d'utilisation et de maintenance dans la
documentation accompagnant
l'appareil.

Attention: L'installation doit être
effectuée uniquement par du personnel
de service qualifié conformément à la
réglementation du Code Electrique
National ou à la réglementation locale.

Disjonction de l'alimentation.

Les appareils avec ou sans commutateure
ON-OFF sont alimentés à chaque fois que
le cordon d'alimentation est branché à la
source d'alimentation; toutefois, les
appareils disposant de commutateurs ON­OFF ne fonctionnent que lorsque le
commutateur ON-OFF est sur la position
ON. Le cordon d'alimentation est la
disjonction d'alimentation principale pour
tous les appareils.

CAUTION: TO REDUCE THE RISK OF
ELECTRICAL SHOCK, DO NOT OPEN COVERS.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

Warning
To prevent fire or shock hazard, do not expose
units not specifically designed for outdoor use to
rain or moisture.

RISK OF ELECTRICK SHOCK

DO NOT OPEN!

CAUTION

Danger: Pour éviter tout risque d'électrocution, ne
pas ouvrir le boîtier. Il n'y a pas de pièces
remplaçables à l'intérieur. Pour toute révision,
s'adresser à un technicien spécialisé.

RISQUE DE CHOC ELECTRIQUE,

NE PAS OUVRIR.

ATTENTION

Attention
Pour éviter un incendie ou une électrocution, ne pas
exposer les appareils qui ne sont pas conçus spécifique­ment pour usage extérieur à la pluie ou à l'humidité.

4

CONFIGUR-

ATION

CONFIGUR-

ATION

MENU

PLAYBACK

RECORDING

FUNCTION

CONNEC-

TION

MAINTEN-

ANCE

CONFIGURATION

Important Safeguards 1
Contents 4
Controls and Indicators 5
Connectors 8
Set Up 9

MENU

How to Set Menu 11
Setting Current Time 13
Setting Menu 16

PLAYBACK

Operation 21
Various Playbacks 23

RECORDING

Set before Recording 27
Record Locking 28
Basic Recording 29
Series Recording 31
Alarm Recording 32

FUNCTION

Alarm Functions 33
High Picture 35
Convenient Functions 36

CONNECTION

Method of Connection 37
Series Recording, Alarm Connections 38

MAINTENANCE

Maintenance 39
Troubleshooting 40
Daily Checks 43
Before Requesting Service 44
Specifications 45

UNPACKING

Unpack carefully. This is electronic equipment and
should be handled with care.

If an item appears to have been damaged in
shipment, replace it properly in its carton and
notify the shipper. If any items are missing, notify
your Sales Representative or Customer Service.

The shipping carton is the safest container in
which the unit may be transported.
Save it for possible future use.

SERVICE

WARNING: Electrostatic-sensitive device. Use
proper CMOS/MOSFET handling precautions
to avoid electrostatic discharge.

NOTE: Grounded wrist straps must be worn
and proper ESD safety precautions observed
when handling the electrostatic-sensitive
printed circuit boards.

DESCRIPTION

The SVR-24PRT/SVR-960PRT Video Cassette
Recorder offers time-lapse in 8 and 40-hour (6 and
30 hour) selectable speeds for a variety of CCTV
applications.

INSTALLATION

Install the SVR-24PRT/SVR-960PRT in
environments where the operating temperature is
+5°C to +40°C (+41°F to +104°F) and the relative
Humidity is 0% to 80% relative, noncondensing.

Precauciones De Seguridad

Debido a limitaciones de espacio, esta etiqueta puede
aparecer en la parte inferior de la unidad.

El símbolo representado por un relámpago
con punta de flecha dentro de un triángulo
equilátero, se muestra con el objetivo de
alertar al usuario que existen "voltages
peligrosos" sin aislamiento, dentro de la
cubierta de la unidad. Dichos voltages
pueden ser de tal magnitud que constituyen
un riesgo de choque eléctrico a personas.

El símbolo de exclamación dentro de
un triángulo equilátero, se muestra con
el objetivo de alertar al ususario de que
instrucciones de operación y
mantenimiento importantes acompañan
al equipo.

Atención: La instalación de este equipo
debe ser realizada por personal capacitado,
solo en acuerdo, y en cumplimiento de
normas del "National Electric Code" (Código
Eléctrico Nacional) ó las normas del
Gobierno Nacional Local.

Para Desconectdar la Alimentación:

Unidades no equipadas con interruptores
ON/OFF, son alimentadas cuando el cable
de alimentación, es conectado a la corriente
eléctrica. Las unidades equipadas con
interruptores son alimentadas de igual
forma, pero adicionalmente requieren qur el
interruptor esté posicionado en ON. El cable
de alimentación es el medio principal de
desconexión del equipo.

Precaution: Pare Reducir El Riesgo De Choque

Eléctrico, Favor No Abrir La Cubierta. Este Equipo

No consta De Piezas O Partes Que Requieren

Servicio O Mantenimiento. Para Reparaciones

Favor Referirse AUn Técnico Calificado.

RIESGO DE CHOQUE

ELECTRICO INO ABRIRI

PRECAUTION

Peligro

Para evitar el peligro de incendio ó choque eléctrico, no

exponga a la lluvia ó humedad, equipos que no han sido

diseñados para uso exterior.

6

CONFIGUR-

ATION

CONFIGUR-

ATION

PLAY

REC

P/STILL

REC CHECK

STOP/EJECT

T

IM

E

M

O

D

E

R

E

C

L

O

C

K

REV

A

U

DIO

O

N

CO

UNT

CNT.M

EM

O

CLEAR

RESET

H

IG

H

P

IC

T

U

R

E

R

E

C

L

O

C

K

9

10

11

12

13

14

15

16

171920

22

18

H

IG

H

P

IC

T

U

R

E

REW

F.F

7 8

23 21

No Name Description

Reference

Page

1 POWER Push for power on/off 21
2 MENU Push to display menu display 11
3 SHIFT❷,

❿

Push to set menu and clock 11

V-LOCK , Push to adjust jitter of picture 22
4 TRACKING/SET , Push to adjust tracking and set menu and clock 22
5 TIME MODE , Push to change time mode on playback 24
6 REC LOCK LED Record locking mode on/off indicator 28
7 HIGH PICTURE LED High picture mode on/off indicator 35
8 DISPLAYPANEL Displays current unit operation settings 7
9 REV Push to reverse playback

[L6H (L8H) mode only] 25
10 AUDIO ON Push to control audio on/off
11 COUNT Initial: Display tape counter

Once: Push to display alarm counter 34

Twice: Push to display operating hour 33
12 CNT. MEMO Initial: Display tape counter

Once: Push to display counter memory 25

Twice: Push to display alarm memory 34
13 CLEAR Push to clear counter 34
14 RESET Push to reset this unit 31
15 HIGH PICTURE Use to select high picture mode 35
16 REC LOCK Use to select record locking mode 28
17 REC CHECK Push to check recording (short time playback)

during recording 29
18 P/STILL Push to freeze frame on the playback or to

pause on the record mode 26
19 REC Push to record 29
20 SHUTTLE Use to operate tape 22
21 JOG Turn to advance or reverse a frame by frame 26
22 PLAY Push to play a tape 22
23 STOP/EJECT Push to stop/eject tape 22

REAR SIDE

8

CONNECTORS

CONFIGUR-

ATION

CONFIGUR-

ATION

EXTERNAL EQUIPMENT TERMINAL INFORMATION

RS-232C

IN

IN OUT

OUT

AUDIO

VIDEO

1
6

ALARM IN
TAPE END OUT

2
7

ALARM OUT
SERIES OUT

3
8

ALARM RESET
GND

4
9

ERROR OUT
SERIES IN

5
10

TRIGGER OUT
1 SHOT RECIN

1 2 3 4 5 6 7 8 9

10

1 2 3 4 5 6 7 8 9

10

EXTERNAL EQUIPMENT TERMINAL

AUDIO IN/OUTPUT JACK

(RCATYPE)

POWER PLUG SLOT

VIDEO IN/OUTPUT JACK
(BNC TYPE)

GND

ALARM IN

ALARM OUT

ALARM RESET

TRIGGER OUT

TAPE END OUT

SERIES OUT

SERIES IN

1 SHOT REC IN

1

1
2
3

ERROR OUT

4
5
6
7

GND

8
9
10

2 3 4 5 6 7 8 9

10

VIH

VIL

T

VIH

VIL

T

VIH

VIL

T

VIH

VIL

T

VIH

VIL

T

VIH

VIL

T

VIH

VIL

T

VIH

VIL

T

VIH

VIL

T

TERMINAL NAME SIGNAL LEVEL TYPE

VIH : 4 ~ 5V
VIL : 0 ~ 0.6 V
T : More than 0.5 second

INPUT

OUTPUT

INPUT

OUTPUT

OUTPUT

OUTPUT

OUTPUT

GND

INPUT

INPUT

VIH : 4 ~ 5V
VIL : 0 ~ 0.6 V
T : Alarm Recording

VIH : 4 ~ 5V
VIL : 0 ~ 0.6 V
T : More than 0.5 second

VIH : 4 ~ 5V
VIL : 0 ~ 0.6 V
T:

VIH : 4 ~ 5V
VIL : 0 ~ 0.6 V
T : More than 8m sec

VIH : 4 ~ 5V
VIL : 0 ~ 0.6 V
T : During input any button

VIH : 4 ~ 5V
VIL : 0 ~ 0.6 V
T : More than 1 second

VIH : 4 ~ 5V
VIL : 0 ~ 0.6 V
T : More than 0.5 second

VIH : 4 ~ 5V
VIL : 0 ~ 0.6 V
T : More than 0.5 second

0V

C.MEMO
A.MEMO
HOUR

H

Display other than playback

Recording Rotates clockwise
Pause Blinking
Timer Recording Rotates clockwise
Alarm Recording Rotates clockwise
Rewinding Rotates rapidly counterclockwise
Fast Forwarding Rotates rapidly clockwise

Reserve timer recording
display

• Lights after programming
timer recording.

Alarm recording display

• Lights during alarm
recording and flickers
upon completion of
recording.

REC/PLAYTime
mode display.

Counter display

• Operating hour display.

• Alarm/Counter memory

display.

""

Alarm/Counter
Memory display

• Counter Memory:
C. MEMO.

• Alarm Memory:
A. MEMO.

• Operating hour
display: HOUR.

REC

REC

REC

REC

10

CONFIGUR-

ATION

CONFIGUR-

ATION

2

Connect the CCD camera
to this unit.

3

Insert the power plug of
this unit video into the wall
outlet.

• Insert the plug into AC100~240V
working outlet.

4

Turn on the power of the
monitor.

• If using a monitor turn on power.

• If using a TV, turn on power and switch

to video input.

• Refer to the operating instructions for
further details on TV.

RS-232C

IN

IN OUT

OUT

AUDIO

VIDEO

1
6

ALARM IN
TAPE END OUT

2
7

ALARM OUT
SERIES OUT

3
8

ALARM RESET
GND

4
9

ERROR OUT
SERIES IN

5
10

TRIGGER OUT
1 SHOT RECIN

1 2 3 4 5 6 7 8 9101 2 3 4 5 6 7 8 9

10

IN OUT

VIDEO

6 7 8 9

RS-232C

IN

IN OUT

OUT

AUDIO

VIDEO

1
6

ALARM IN
TAPE END OUT

2
7

ALARM OUT
SERIES OUT

3
8

ALARM RESET
GND

4
9

ERROR OUT
SERIES IN

5
10

TRIGGER OUT
1 SHOT RECIN

1 2 3 4 5 6 7 8 9101 2 3 4 5 6 7 8 9

10

POWER

CCD CAMERA

AC100~240V

12

MENU

1

Press the MENU button

(Does not display while in play mode
or until the time has been set.)

3

MENU

MAIN MENU

1

❿

CLOCK SET/ADJUST
2 DISPLAYMODE SETUP
3 ALARM REC SETUP/RECALL
4 REC MODE SETUP
5 VCR MODE SETUP
6 PROGRAM SETUP
7 POWER LOSS MEMORY

(

❷

❿

) END:MENU

2. DISPLAY MODE SETUP

• Set desired time date format and on
screen location.

3. ALARM REC SETUP

• Select Alarm REC Mode.

DISPLAYMODE SETUP

1

❿

DATE DISPLAY------------------(ON)
2 TIME DISPLAY-------------------(ON)
3 POSITION -------------(R-BOTTOM)

(

❷

❿

) END:MENU

4. REC MODE SETUP

• Set the repeat record mode. 1-shot
record mode and series record mode.

REC MODE SETUP

1

❿

REC TIME MODE--------------(L8H)
2 REPEATREC-------------------(OFF)
3 SERIES REC -------------------(OFF)
4 1-SHOT REC--------------------(OFF)

(

❷

❿

) END:MENU

5. VCR MODE SETUP

• Trigger out timing control and
beeper sound control.

VCR MODE SETUP

1

❿

TRIGGER--------------------(1FIELD)
2 V-SYNC----------------------------(ON)
3 BUZZER ---------------------------(ON)
4 TAPE LENGTH----------------(E240)

(

❷

❿

) END:MENU

6. PROGRAM SETUP

PROGRAM SETUP1

START STOP DATE MODE

•

❿

•

•

•

•

•

PROGRAM SETUP2
(

❷

❿

/–+,CLEAR) END:MENU

• Select the program record.

7. POWER LOSS MEMORY

• Displays power failure and restore
history.

POWER LOSS MEMORY

YEAR DATE TIME

•

OFF
ON

•

OFF
ON

•

OFF
ON

END:MENU

ALARM REC SETUP/RECALL

1

❿

MODE -----------------------------(L8H)
2 DURATION--------------------(AUTO)
3 BUZZER ---------------------------(ON)
4 ALARM RECALL

(

❷

❿

/–+) END:MENU

PROGRAM SETUP2

START STOP DATE MODE

•

❿

•

•

•

•

•

PROGRAM SETUP1

(

❷

❿

/–+,CLEAR) END:MENU

1. CLOCK SET/ADJUST

CLOCK SET/ADJUST

1

❿

SUMMER TIME SET (USE)
2 DISPLAYMODE (YY-MM-DD)
3 CLOCK SET/ADJUST

YEAR DATE TIME

2001 01/01 MON 12:00

$

(

❷

❿

/–+) END:MENU

After positioning " ❿" sign
to the desired menu item,
press the SHIFT

❿

button

to proceed.

• Displays the selected menu on the
screen.
(Refer to 13~20 page)

*

*

14

MENU

SETTING CURRENT TIME

Example) December 25 . 2002 13:30

Press the MENU button.

•When pressing the MENU button,

the MAIN MENU displays.

2

Press the SHIFT ❿!button.

•When pressing the SHIFT

❿❿ !

button,

CLOCK SET/ADJUST displays.

MENU

SHIFT
V-LOCK

MAIN MENU

1

❿

CLOCK SET/ADJUST
2 DISPLAYMODE SETUP
3 ALARM REC SETUP/RECALL
4 REC MODE SETUP
5 VCR MODE SETUP
6 PROGRAM SETUP
7 POWER LOSS MEMORY

(

❷

❿

) END:MENU

CLOCK SET/ADJUST

1

❿

SUMMER TIME SET (USE)
2 DISPLAYMODE(YY-MM-DD)
3 CLOCK SET/ADJUST

YEAR DATE TIME

2001 01/01 MON 12:00

$

(

❷

❿

/–+) END:MENU

Set the week, day, month
and time using the
TRACKING/ SET
buttons.

•

Press the SHIFT

❿❿ !

button after

setting the week, then

$

sign will

place under the day.

•The month and time work in the

same way.

6

Press the SHIFT ❷!button
and set the SUMMER TIME
OUT .

TRACKING/SET

3

Press the SHIFT ❿!button.

•When pressing the SHIFT

❿❿

button,

the SUMMER TIME SET displays.

•Press the SHIFT

❿❿ !

button to toggle

the summer time USE or NO USE.

4

Press the SHIFT ❷!button.

•

Select the SUMMER TIME IN.

SHIFT
V-LOCK

SHIFT
V-LOCK

SHIFT
V-LOCK

SUMMER TIME SET

1

❿

SUMMER TIME (USE)
2 SUMMER TIME IN
3 SUMMER TIME OUT

WEEK MONTH TIME
IN LAST /FRI 2 9:00
OUT FIRST /

SUN

12 12:00

(

❷

❿

/–+) END:MENU

7

Press the MENU button.

•

Check the week, day, month and
time again and press the MENU
button.

MENU

SUMMER TIME SET
1 SUMMER TIME (USE)
2

❿

SUMMER TIME IN

3 SUMMER TIME OUT

WEEK MONTH TIME

IN LAST /FRI

11

14:00

$

(

❷

❿

/–+) END:MENU

SUMMER TIME SET
1 SUMMER TIME (USE)
2

❿

SUMMER TIME IN

3 SUMMER TIME OUT

WEEK MONTH TIME

IN LAST /FRI

11

14:00

$

(

❷

❿

/–+) END:MENU

SUMMER TIME SET
1 SUMMER TIME (USE)
2 SUMMER TIME IN
3

❿

SUMMER TIME OUT

WEEK MONTH TIME

OUT FIRST /

SUN

12 12:00

$

(

❷

❿

/–+) END:MENU

SHIFT
V-LOCK

CLOCK SET/ADJUST

1

❿

SUMMER TIME SET (USE)
2 DISPLAYMODE(YY-MM-DD)
3 CLOCK SET/ADJUST

YEAR DATE TIME

2001 01/01 MON 12:00

$

(

❷

❿

/–+) END:MENU

8

Press the SHIFT ❷button and
press the SHIFT

❿

button.

•Whenever pressing the SHIFT

❿❿

button, the display mode changes.

•The display changes as following.

(YY-MM-DD)

➝ (DD-MM-YY) ➝

(MM-DD-YY)

CLOCK SET/ADJUST
1 SUMMER TIME SET (USE)
2

❿

DISPLAYMODE(YY-MM-DD)

3 CLOCK SET/ADJUST

YEAR DATE TIME

2001 01/01 MON 12:00

$

(

❷

❿

/–+) END:MENU

– HOW TO SET THE DISPLAY MODE