Samsung DVD-S221, DVD-S321, DVD-S320 Disassemble

Samsung Electronics

2-1

2. Disassembly and Reassembly

2-1 Cabinet and PCB

2-1-1 Top Cabinet Removal

1) Remove 3 Screws Πon the back Top Cabinet.

2) Lift up the Top Cabinet in direction of arrow.

Π3 SCREWS

Fig. 2-1 Top Cabinet Removal

Note : Reassembly in reverse order.

2-2

Samsung Electronics

Disassembly and Reaasembly

2-1-2 Door-Tray Removal

1) Supply power and open Tray Œ.

2) Disassemble the Door-Tray ´ in direction of arrow “A”.

3) Close Tray Πand power off.

Note : If Tray Œ doesn’t open, insert a Screw driver ¨ into the Emergency hole ˇ (as shown in detailed draw-

ing) and then push it in the direction of arrow “B”. Open Tray manually.

<Side View>

ˇ EMERGENCY HOLE

¨ SCREW DRIVER

"B"

ΠTRAY

´ DOOR-TRAY

"A"

Fig. 2-2 Door-Tray Removal

Disassembly and Reaasembly

Samsung Electronics

2-3

ΠKNOB-VOLUME

ˆ 2 HOOKS

´ 2 HOOKS

Ø ASS'Y FRONT-CABINET

’ KEY PCB

” 5 SCREWS

∏ KNOB-JOG

¨ 1 HOOK

ˇ 1 HOOK

Fig. 2-3 Ass’y Front-Cabinet Removal (DVD-S221/S222/S320)

2-1-3 Ass’y Front-Cabinet Removal

<DVD-S221/S222/S320>

1) Release 6 Hooks Œ, ´, ˇ, ¨ and remove Ass’y Front-Cabinet ˆ.

<DVD-S321>

1) Remove Knob-Volume Œ.

2) Release 6 Hooks ´, ˇ, ¨, ˆ and remove Ass’y Front-Cabinet Ø.

3) Remove Knob-Jog ∏, 5 Screws ”, and Key PCB ’.

Fig. 2-4 Ass’y Front-Cabinet Removal (DVD-S321)

¨ 2 HOOKS

Π2 HOOKS

ˆ ASS'Y FRONT-CABINET

ˇ 1 HOOK

´ 1 HOOK

2-4

Samsung Electronics

Disassembly and Reaasembly

DECK-ASS'Y

Π3 SCREWS

DCN1

DCN2

DCN3

FLAT-CABLE

CONNECT-WIRE

MAIN PCB

2-1-4 Ass’y Deck Removal

1) Disconnect Flat-Cable,Connect-Wire from DCN1, DCN2 and DCN3 on Main PCB.

2) Remove 3 Screws Œ from the Ass’y Deck and lift it up.

Fig. 2-5 Ass’y Deck Removal

Disassembly and Reaasembly

Samsung Electronics

2-5

ˆ MAIN PCB

¨ 3 SCREWS

´ 1 SCREW

Π2 SCREWS

ˇ JACK PCB

Fig. 2-6 Main PCB, Jack PCB Removal

2-1-5 Main PCB, Jack PCB Removal

1) Remove 3 Screws Œ, ´ and lift up the Jack PCB ˇ.

2) Remove 3 Screws ¨ and lift up the Main PCB ˆ.