P2000
4 Buttons
Digital Button
Start Button
Analog Button
Shift Button
8 -Way D Pad
Tilt Button
Analog Stick
Throttle Wheel
P2000 - Head On
L1
L2
R1
R2
ENGLISH
1 2
• Second generation Tilt technology provides simpler and more accurate game control
• Analog Stick and 8-way D-Pad
• 4 Triggers and 4 Buttons in a familiar layout
• Throttle Wheel - ideally positioned to give added fingertip control for driving and flying
games
• Direction lock on the Analog Stick for improved control
• Pad auto-configures for the game being played - no need for user setup
• Fully programmable for advanced users, using Saitek Gaming Extensions (SGE)
• 3 mode switches for controlling Tilt, Analog and Digital modes
GETTING STARTED
Dual Compatibility for USB and Game Port Connection
Important Notice: Connect your controller using only ONE of the connectors.
The Saitek P2000 comes with a choice of two connectors. You can either connect with the
conventional game port connector or, if your computer has the capability, connect via the USB
(Universal Serial Bus) connector. It is strongly recommended that if you have USB capability
on your computer, you should use that connector to attach this device.
The USB connector has many benefits over the older game port connector and is rapidly
becoming the standard interface connection for quality computers.
Installing your Saitek P2000
Important Notice: You must install the software from the Saitek Product Companion Disc
before you connect your game controller to the USB port.
1 With your computer switched on, close down any programs you are running and insert
the Saitek Product Companion Disc.
2 When the Saitek Product Companion Disc Dialog Box appears, select your Saitek
P2000 from the drop down list and click on the Install button.
3 In the next dialog box, click on Yes to agree with the installation of the Saitek P2000 and
then click on Accept to agree to the license agreement.
Note: For your Saitek P2000 to work, you need to have a minimum of Microsoft® Internet
Explorer 4 and DirectX 7.0a installed on your computer. This installation will automatically
recognize if you already have them loaded on to your machine. However, if they are not
present, you will need to take the following steps:
• If you are prompted to install Microsoft® Internet Explorer, click on Install and follow
the on-screen instructions and then restart your computer when prompted.
• If you are prompted to install Microsoft® DirectX 7.0a, click on Install and follow the
on-screen instructions and then restart your computer when prompted.
4 At the Saitek Gaming Extensions screen, click on Install and follow the on-screen
instructions and then restart your computer.
5 When you are prompted, attach your Saitek P2000 to the computer (using the USB
connector if you have the option) and follow the on-screen instructions.
6 When the Test screen appears, test your controller's buttons and attributes. Your Saitek
P2000 is now ready for gameplay, but first you should take time to run the Game Profile
Wizard to get the most from your new controller (see next section).
ENGLISH
3 4
After you have completed testing your Saitek P2000, you will then be asked to run the
Game Profiler Wizard, click on Yes to proceed.
At the Welcome dialog box you will be prompted to Import the Game Profiles for your
controller via either the Internet or the CD. Check the box next to CD and click on
Continue. The software will scan your computer for those games you already have
loaded and will load the corresponding profiles.
When the Game Profiler Wizard has completed loading the profiles, click on Next and
then Finish. Your Saitek P2000 is now ready for gameplay.
Using the P2000 in Analog Mode
In Analog Mode, the Analog stick becomes active with the D-Pad functioning as a hat switch.
Using the P2000 in Digital Mode
In this mode, the Saitek P2000 works as a standard digital gamepad.
Tilt Function
The Tilt function on the Saitek P2000 is a feature that allows the user to perform the left/right
and forward/backward functions by tilting the pad in the relevant direction. The power-up default
setting for Tilt is ON.
To enable/disable the Tilt Function press the Tilt Button. When the gamepad is in Tilt Mode,
the Tilt LED will light up.
Changing the Tilt Settings
The Tilt Settings can be altered from the factory default to suit your own gaming preferences.
However, it is recommended that you play a game for a while before making any changes to
these settings. If after playing for a while, the gamepad does not behave the way you want it to,
then proceed with making the changes.
Note: The default zero setting (no movement in any direction) for the Tilt setting on the P2000
is with the pad held in such a way that the top plate is level (horizontal).
To activate the Tilt Set Mode, press the Tilt Button for longer than three seconds until the Tilt
LED flashes continuously. This will allow you to:
• Increase and decrease the range of Tilt (Tilt Sensitivity)
• Set the center or zero position of the Tilt
• Restore the factory default settings
• Save the new Tilt settings
ENGLISH
5 6
DIGITAL LED
ON
MODE
DIGITAL
ANALOG STICK
N/A
D-PAD
FUNCTIONS AS
D-PAD
ANALOG LED
ON
MODE
ANALOG
ANALOG STICK
FUNCTIONS AS
ANALOG STICK
D-PAD
FUNCTIONS AS
HAT SWITCH
In the Tilt Set Mode, the Tilt LED
flashes constantly. To let you know
when changes to the Tilt Settings
ENGLISH
7 8
Lockable Axis on the Analog Stick
To improve your gaming, Saitek have added a unique feature
to the P2000 – a lockable axis for the Analog Stick. This is
ideal for those situations when the axes need to be separately
controlled, eg, for steering or for accelerator/brake
function. Simply press down the button to the side of the stick and
rotate the dial to the direction lock you require - either “Up/Down” or
“Right/Left” depending on the type of game you are playing. This will especially improve your
control in driving games.
Throttle Wheel
The Saitek P2000 comes with a Throttle Wheel for improved play - especially in driving and
flying games. It is situated in the optimum position for precision fingertip control. The powerup default setting for the Throttle Wheel is ON.
Shift Button
Some controls can be programmed to perform an extra function by use of the Shift Button.
This works in the same way as when you press the Shift Key in conjunction with another key
on your computer keyboard – to assign a new and added function to the key.
By simultaneously pressing the Shift Button with another control, you can assign another
command to that control. This is a simple and effective way of increasing the functionality of
your game controller.
Saitek Gaming Extensions (SGE)
Saitek Gaming Extensions (SGE) is the software Saitek supplies to configure your Saitek
game controller for enhanced functionality. SGE delivers a powerful set of features, allowing
you to tailor your game controller to the ultimate configuration for the ultimate gameplay.
Despite a level of sophistication previously unseen in the market, the software remains simple and intuitive to use.
Features of SGE:
• Automatic profile activation for current game
• Personalize the controller settings for your favorite games
• Configure your controller with an on-screen rotational 3D model and interface
• Multiple profile option for each controller (ideal if a controller is used by several people)
• Program special moves
with sophisticated timing
features
• Special game setups available from the Saitek website
and the Product Companion
CD
Open the SGE software by double-clicking on the SGE icon.
Next, double-click on New Game Wizard and then on Next.
You will now see a list of all the .exe files on your PC to which SGE can be assigned.
Highlight the name of the game you wish to create a profile for, eg, tomb4.exe, then
click on Next.
On the following screen, leave both options ticked and click on Next, then highlight the
controller and click on Nextagain.
Finally, review the information offered on the final screen and click on Finish.
In the Explorer mode you will now see a folder for the your new profile. Double-click on
the folder and you will see it open out to show 2 sub-folders - the Command List and
Saitek P2000.
Click on the folder called Saitek P2000 and a 3-D model of the controller will appear on
ENGLISH
9 10
the screen.
3 If you place the mouse pointer on the 3-D model and hold down the left mouse button,
you can rotate the image.
4 Next, click on any control on the controller. You will see that the control turns blue
(indicating that it is ready for programming) and that the text boxes at the bottom of the
screen show its attributes (see the SGE diagram to see what each box denotes).
5 The long bar at the bottom of the screen is the Command Editor. Simply click on and high
light the current keyboard setting and replace it by pressing the new keyboard command.
Note: If you look in the manual that came with your game, it will tell you what keyboard
commands are associated with what actions in the game.
WARNING: THE SGE AUTOMATICALLY SAVES THE CHANGES YOU MAKE WITHOUT THE
USE OF A SAVE BUTTON. THEREFORE, IF YOU MAKE A MISTAKE, SIMPLY HIGHLIGHT
THE COMMAND LINE AND TYPE IN THE CORRECT ENTRY.
For a full guide to programming your Saitek P2000 with SGE, see the Saitek Gaming
Extensions: User Manual supplied on the Saitek Product Companion CD that came
with this product.
TROUBLE-SHOOTING
Q My computer is not recognizing the P2000 – what’s wrong?
A Check the cable connections. Turn off the computer and then unplug your
gamepad. Plug it back in making certain that is securely attached.
Q Can I have another game controller connected to my PC at the same
time?
A To avoid potential problems and conflicts, we recommend that you remove
any existing game controllers before installing the P2000. Do this by
selecting the previously installed controller in the Game Controllers window
and clicking on Remove.
Q I have plugged in my P2000 using the USB connector and it has not been
recognized by the computer.
A Your USB connection may not be enabled within the computer. You can
switch it on via your computer’s BIOS settings (please check the
documentation that came with your computer). If you are still unsure as to
what to do, contact Technical Support.
Q I am using my P2000 with SGE programming software and it doesn’t work in
some Electronic Arts games such as Need for Speed 3, Fifa and NHL.
A To make the controller work with these games, you need to select ‘keyboard’within
the game rather than ‘game controller’. Alternatively, use the pad without the SGE
and let the pad auto-configure the best setup for the game.
3D model of the
game controller
Shift State
Name of Control
Currently Assigned
Button
Command Editor
11 12
• Current and forthcoming products
• Links to useful sites
• Driver upgrades
• Game configuration
• Make sure you have followed all the steps shown in this manual
• Check that the gamepad is correctly connected to your computer
• Confirm that your PC is functioning normally
necessary for us to help you.
1 Know the problem - make sure that you are clear about the problem
you are having and can describe events that made it happen
2 Check the Trouble-shooting guide – double-check that your problem is not
covered in the Trouble-shooting section of this manual.
3 Know your hardware - if it is possible, make sure you have the following
information to hand:
• The make and model of the computer you are using
• The motherboard you are using
• The version of the game you are playing
• The make and model of your sound card
4 Be ready - if possible, please try and ring whilst sitting at the computer
with all the relevant information and hardware to hand. If you are having
a problem with a particular game, make sure that you have that game
loaded.
5 Be patient - we try our best to deal with queries as fast as we can.
At times it may be necessary to refer queries on to our specialist staff.
Please be patient!
To contact your local Saitek Technical Support Centre, look up the relevant address on the
separate Technical Support Center sheet that comes packaged with this product.
ENGLISH
Loading...