Ryobi RMS10 Owner's Manual
OPERATOR’S MANUAL
MITER SAW STAND
RMS10
Your miter saw stand has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
TABLE OF CONTENTS
Rules for Safe Operation ................................................................................................................................................. 2
Symbols ........................................................................................................................................................................... 3
Features ........................................................................................................................................................................... 4
Assembly ......................................................................................................................................................................4-6
Operation ......................................................................................................................................................................... 7
Maintenance .................................................................................................................................................................... 8
RULES FOR SAFE OPERATION
Safe operation of this accessory requires that you read and
understand this operator’s manual, the operator’s manual for
the miter saw and all labels affixed to the tool.
READ ALL INSTRUCTIONS
Know your accessory. Read the operator’s manual
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
accessory.
Keep the work area clean. Cluttered work areas and
work benches invite accidents.
Always wear safety glasses with side shields.
Everyday glasses have only impact resistant lenses. They
are NOT safety glasses.
Always confirm any miter saw used is mounted se-
curely and is stable before plugging in the miter saw.
Before turning on the saw, perform a dry run of the
cutting operation just to make sure that no problems
will occur when the cut is made.
WARNING:
Do not modify or use this stand for any purpose for
which it is not intended.
This stand is designed to be used on a flat stable
surface. Do not use the stand on an uneven surface.
Be sure to allow enough room to handle and properly
support the workpiece.
Follow the tool mounting instructions carefully, and
ensure the tool is fastened securely.
Maximum weight of the miter saw and workpiece
together must not exceed 150 pounds.
Do not apply an unbalanced load that could cause the
miter saw stand to tip over.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this accessory.
If you loan someone this accessory, loan them these
instructions also to prevent misuse of the product and
possible injury.
This stand is designed for use with the TS1141 miter saw only. Use with any other saw can result in serious personal
injury.
2
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER:
WARNING:
CAUTION:
CAUTION:
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and safer.
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
SYMBOL NAME DESIGNATION/EXPLANATION
Safety Alert
Read Operator’s Manual
Precautions that involve your safety.
To reduce the risk of injury, user must read and understand operator’s manual before using this product.
Eye Protection
Class II Construction
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Double-insulated construction
3
Loading...