Rotel RB-1590 User Manual [de]

RB-1590

Stereo Power Amplifier

RB-1590

Stereo Power Amplifier

Power - rened, detailed, and plenty of it. Rotel’s new
Class AB stereo power amplier is rated at 350 watts
per channel into 8 ohms both channels driven. That
is a lot of power, but larger listening rooms or less
sensitive loudspeaker designs require it to bring out
the best possible performance and attain realistic
audio dynamics.

The impressive capabilities of this amplier begin
with a solid foundation consisting of twin, massive
toroidal transformers custom made by Rotel. These
transformers are just part of a rock-solid power supply
that includes eight special British made BHC capacitors,
known for their low loss and quick response times.
These components will continue to supply all of the
voltage and current requirements needed, even under
the most difcult load conditions.

But power unrened has never been a Rotel design
goal. Every aspect of circuit design has been carefully
considered and each component has been rigorously
selected after extensive listening sessions. The circuit
topography has been laid out in a true monoblock
design ensuring maximum signal separation and
improved stereo imaging.

Features include: XLR Balanced and RCA input
connections, two pair of 5-way speaker binding posts,
12-volt trigger control, thermal protection circuitry, over­current, over-voltage protection circuitry, dual staged
power on relay to reduce surge current and extend
longevity, and a detachable IEC power cord all in

a 5 U chassis with included rack ears.

The RB-1590 has been designed for the most
discerning audio enthusiast and will provide the
highest levels of audio performance.

SPECIFICATIONS

Continuous Power Output

(20 - 20kHz, <0.03%, 8 ohms)

Total Harmonic Distortion

(20Hz - 20kHz, 8 ohms)

Intermodulation Distortion

(60Hz : 7kHz, 4 : 1)

Frequency Response

(±0.5 dB)

Damping Factor

(1kHz, 8 ohms)

Speaker Impedance

Rotel of America

54 Concord St.
N. Reading, MA 01864 USA
T [phone]
F [phone]

www.rotel.com

350 watts/channel

<0.03%

<0.03%

10Hz - 100kHz

300

4 ohms minimum

Signal to Noise Ratio (A weighting)
Channel Separation
Input Impedance/Sensitivity

Unbalance

Balance

Gain

Unbalance

Balance

Power Requirements

USA
EC

Power Consumption
Standby
BTU (4 ohms, 1/8th power)
Dimensions (W x H x D)

Front Panel Height
Weight (net)

120 dB
>64 dB

12k ohms / 2.2 V
100k ohms / 3.5 V

27.5 dB (±0.5 dB)

23.5 dB (±0.5 dB)

120 volts, 60 Hz
230 volts, 50 Hz

800 watts
< 0.5 watts
2100 BTU/h

431 x 237 x 454mm
17 x 9 3/8 x 17 7/8 in

5U / 221mm / 8 3/4 in

38.1kg, 84 lb