Bulletin 150 SMC-Flex and SMC-3 (201-480A) Series B Protective Module Installation
(Cat 150-F84L (480V), 150-F86L (600V))
WARNING: To prevent electrical shock, disconnect from power source before installing
or servicing. Install in a suitable enclosure. Keep free from contaminants.
WARNING: Protective modules must not be mounted on the load side when used with controllers that use an
inside-the-delta motor connection or with pump, linear deceleration or braking control. Installing them with a Delta motor
connection will result in immediate damage to the protective module.
Line Side Terminal Cover Removal (SMC-Flex Shown)
3
4
1
2
Load Side Terminal Cover Removal (SMC-Flex Shown)
5
4
3
1
2
PN-164127
DIR 41053-227 (Version 07)
Publication 150-IN036G-EN-E
Printed in U.S.A.
4
5
4
Protective Modules Installation
10 lb-in
(1.1 Nm)
1
3
NET B
NET A
MOD
PORT
Esc
24 25 26 27 28 29 30 31 32 33 34
23
11 12 13 14 15 16 17 18 19 20 21 22
4
3
2
28 lb-in
(3.2 Nm)
Click
4
6
Click
5
5
7
8
PN-164127
DIR 41053-227 (Version 07)
Publication 150-IN036G-EN-E
Printed in U.S.A.
Click
Click
4
10
7
9
9
Bulletin 150 SMC-Flex and SMC-3 (108-135A) Series B Protective Module Installation
(Cat 150-F84L (480V), 150-F86L (600V))
WARNING: To prevent electrical shock, disconnect from power source before installing
or servicing. Install in a suitable enclosure. Keep free from contaminants.
WARNING: Protective modules must not be mounted on the load side when used with controllers that use an
inside-the-delta motor connection or with pump, linear deceleration or braking control. Installing them with a Delta motor
connection will result in immediate damage to the protective module.
Terminal Cover Removal (SMC-Flex Shown)
4
5
3
1
2
4
6
7
PN-164127
DIR 41053-227 (Version 07)
Publication 150-IN036G-EN-E
Printed in U.S.A.
8
9
8
Protective Modules Installation
10 lb-in
(1.1 Nm)
1
2
28 lb-in
(3.2 Nm)
3
4
3
Click
5
6
PN-164127
DIR 41053-227 (Version 07)
Publication 150-IN036G-EN-E
Printed in U.S.A.
Click
Click
Click
8
7
7
Bulletin 150 SMC-Flex (625-1250A) Series B Protective Module Installation
(Cat 150-F84L (480V), 150-F86L (600V))
WARNING: To prevent electrical shock, disconnect from power source before installing
or servicing. Install in a suitable enclosure. Keep free from contaminants.
WARNING: Protective modules must not be mounted on the load side when used with controllers that use an
inside-the-delta motor connection or with pump, linear deceleration or braking control. Installing them with a Delta motor
connection will result in immediate damage to the protective module.
Protective Modules Installation
20 lb-in
(2.3 Nm)
3
10 lb-in
(1.1 Nm)
20 lb-in
(2.3 Nm)
2
T1 / 2
1
T2 / 4
T3 / 6
L1 / 1
10 lb-in
(1.1 Nm)
4
L2 / 3
L3 / 5
PN-164127
DIR 41053-227 (Version 07)
Publication 150-IN036G-EN-E
Printed in U.S.A.
PN-164127
DIR 41053-227 (Version 07)
Publication 150-IN036G-EN-E
Printed in U.S.A.
SMC-50 Protective Module Installation Instructions
(Cat 150-F84L (480V), 150-F86L (600V))
WARNING: To prevent electrical shock, disconnect from power source before installing
or servicing. Install in a suitable enclosure. Keep free from contaminants.
WARNING: Protective modules must not be mounted on the load side when used with controllers that use an
inside-the-delta motor connection or with pump, linear deceleration or braking control. Installing them with a Delta motor
connection will result in immediate damage to the protective module.
Load Terminal Cover Removal
4
1
2
5
7
6
8
4
3
Line Terminal Cover Removal
1
2
3
Protective Modules Installation
6
5
4
7
6
4
8
6
28 lb-in
(3.2 Nm)
1
PN-164127
DIR 41053-227 (Version 07)
Publication 150-IN036G-EN-E
Printed in U.S.A.
10 lb-in
(1.1 Nm)
2
28 lb-in
(3.2 Nm)
1
Load Terminal Cover Installation
2
Click
1
2
Click
3
4
Click
6
Click
4
5
5
Line Terminal Cover Installation
2
1
Click
Click
4
3
6
8
Click
Click
6
5
PN-164127
DIR 41053-227 (Version 07)
Publication 150-IN036G-EN-E
Printed in U.S.A.
7
7
SMC-50 Protective Module Installation Instructions
(Cat 150-F84L (480V); 150-F86L (600V))
WARNING: To prevent electrical shock, disconnect from power source before
installing or servicing. Install in a suitable enclosure. Keep free from contaminants.
WARNING: Protective modules must not be mounted on the load side when used with controllers that use an
inside-the-delta motor connection or with pump, linear deceleration or braking control. Installing them with a Delta
motor connection will result in immediate damage to the protective module.
Protective Modules Installation - 150-SC_
28 lb-in
(3.2 Nm)
3
10 lb-in
(1.1 Nm)
4
1
28 lb-in
(3.2 Nm)
10 lb-in
(1.1 Nm)
2
PN-164127
DIR 41053-227 (Version 07)
Publication 150-IN036G-EN-E
Printed in U.S.A.
Protective Modules Installation - 150-SD_
10 lb-in
(1.1 Nm)
28 lb-in
(3.2 Nm)
3
10 lb-in
(1.1 Nm)
4
1
28 lb-in
(3.2 Nm)
2
PN-164127
DIR 41053-227 (Version 07)
Publication 150-IN036G-EN-E
Printed in U.S.A.
Loading...