SMC-3
TM
MOV Protective Module Installation Instructions
(Cat 150-C _ _)
WARNING
Installation
1
41053-172-01
DIR 41053-172 (Version 02)
Printed in Korea
To prevent electrical shock, disconnect from power source before installing
or servicing.
Protective modules must NOT be mounted on the load side when used with
controllers that use an inside-the-delta motor connection. Installing them
with an inside-the-delta motor connection will result in immediate damage
to the protective module.
Installation (Cont'd)
2
3
2
2.3 - 2.5 Nm
(20 - 22 lb-in)
4
41053-172-01
DIR 41053-172 (Version 02)
Printed in Korea
1