Rocketboost™ Wireless Speaker
System
RF-RBWS01
User Guide
2
Rocketfish
Rocketboost™ Wireless Speaker
System
Contents
Introduction ...................................................................... 3
Important safety instructions ..................................... 5
Features .............................................................................. 8
Setting up your wireless speaker system..............14
Using your wireless speaker system.......................19
Expanding your Rocketboost System....................26
Maintaining your system............................................28
Troubleshooting ............................................................28
Specifications..................................................................30
Legal notices ................................................................... 30
One-year limited warranty......................................... 33
Introduction
Congratulations on your purchase of the Rocketboost™ Wireless
Speaker system. This system represents the state of the art in 2.4 GHz
wireless speaker design, and lets you enjoy your music without the
limitations of cables.
With a maximum 150-foot broadcast range, this powerful wireless
speaker system transmits through walls, floors, and ceilings. The
sound quality is free from interference and offers you rich sounding
bass and crisp treble.
3RF-RBWS01
The system can be used with any of your audio components, like your
CD/DVD player, home theater system, or even audio output from a
computer or MP3 player. By using other Rocketboost wireless audio
products, you can also configure multiple audio streams and listen to
any of those audio streams at the wireless speaker.
This User Guide explains how to correctly install, operate, and get the
best performance from your Rocketboost Wireless Speaker System.
Read this guide carefully before installing your system, and then keep
it handy for quick reference.
Package contents
The box should contain the following:
4
Wireless
sender/receiver
Wireless speakers
User Guide
AC power adapter
for Wireless
sender/receiver
Remote control
Quick Setup
Guide
3.5 mm audio cable
3.5 mm to RCA adapter
cable (6 in, 0.15 m)
AC power adapter
for Wireless Speakers
USB Cable
Important safety instructions
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of
uninsulated "dangerous voltage" within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK:
DO NOT REMOVE SCREWS, COVERS OR THE CABINET.
NO USER SERVICING PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8 Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
5RF-RBWS01
11 Only use attachments/accessories specified by the manufacturer.
12 Unplug this apparatus during lightning storms or when unused for long
periods of time.
13 Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14 To reduce the risk of fire or electric shock, do not expose this device to
rain, moisture, dripping, or splashing, and no objects filled with liquids,
such as vases, shall be placed on it.
15 The wall plug is the disconnecting device. The plug must remain readily
operable.
16 Batteries should not be exposed to excessive heat such as sunshine, fire,
or the like.
Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
Warni ng: Read the Rating Label on the back of the unit for power input and other
safety information.
Caution - Proper Installation
Install the system in a place which is level, dry and neither too hot nor too cold. The
appropriate temperature is between 5° C and 35° C.
Install the system in a location with adequate ventilation to prevent internal heat
from building up inside the unit.
Caution - Proper ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate
the apparatus for adequate ventilation.
What is Rocketboost?
Rocketboost is expandable wireless digital audio.
• Products with Rocketboost technology let you easily expand your
listening experience throughout your home.
• Rocketboost does not interfere with other wireless products in your
home.
• Rocketboost is uncompressed digital audio compatible with all audio
formats such as Dolby TrueHD, and DTS-HD Master Audio used with
Blu-ray.
6
When you see the Rocketboost logo on any product, it
has been designed to work with other Rocketboost
products, no matter who manufactures them.
How does Rocketboost work?
Rocketboost technology can connect all audio devices throughout
your home to form a home audio network.
Rocketboost products include “Senders,” which send or transmit
audio streams, and “Receivers,” which receive the audio. This lets you
listen to music from your Sender in other rooms using your Receiver.
Rocketboost is expandable. Each Rocketboost Receiver can select the
audio from any Sender in your Rocketboost audio network. The
following shows an example Rocketboost network. You can set up
your network to meet your specific needs.
RF-RBKIT
RF-RBWHP01
Wireless Stereo Headphones
(Headphones are Rocketboost
Wireless Receiver, Charging base
is Rocketboost Wireless Sender)
Wireless sender/receiver
(Rocketboost Wireless
Sender/Receiver)
RF-RBUSB
Wireless HD Audio Starter Kit
(Rocketboost Wireless Sender shown)
RF-RBWS01
Wireless speakers
(Rocketboost Wireless
Receiver)
We hope you enjoy your new Rocketboost system. Remember that
it’s designed to grow with your home entertainment needs, and that
it’s easy to add a new device to the network as you expand your
system.
7RF-RBWS01
Features
• High-Performance Audio - Uncompressed digital CD-quality sound,
adjustable volume control
• Strong Wireless Signal - 150 ft. wireless range (maximum, line of sight),
great sound, no static, won't interfere with your other wireless products,
compatible with all Rocketboost products
• Versatile/Easy audio connection options - USB for computer audio, Line
Input for other devices like MP3 or CD players
• Easy to use - Easy to set up
Wireless sender/receiver (front panel)
# Featur e Description
Standby indicator Turns red when the wireless sender/receiver is in standby mode.
1
Power /Join b utton Press to turn the wireless sender/receiver on. Press and hold to initiate joining. Press again to go
2
Power/Join indicator Lights blue when the HUB STATUS switch is set to DISABLE.
3
to standby mode. When you connect the AC power adapter, the device turns on automatically.
Lights green when the HUB STATUS switch is set to ENABLE.
The indicator will turn solid when it is joined in a network, if the device is not in a network, the
indicator blinks slowly. When the device is put in joining mode, the indicator blinks rapidly. See
“Establishing communication” on page 19 for more information.
8
# Feature Description
Sender mode indicator Turns blue when sending audio.
4
Source Press to select different audio streams on your Rocketboost network. Each press moves to the
5
Receiver mode
indicator
6
Line in indicator Turns blue when an audio source device is plugged into the Line In jack.
7
Remote control sensor
8
window
Note: This indicator will light automatically when a 3.5 mm connector or USB cable is attached
to the device (the device senses the cable connection).
next source.
Turns blue when receiving audio from a Rocketboost wireless sender. Blinks slowly if the current
source listened to is muted.
Note: This indicator will not be lit if the Rocketboost wireless sender is turned off. Press the
SOURCE button to find the next available source.
Note: The indicator does not light when a USB cable is connected to the USB jack.
Receives the signal from the remote control.
9RF-RBWS01
Wireless sender/receiver (back panel)
# Feature Description
External antenna Receives audio from wireless senders. Sends audio to receivers.
1
HUB STATUS switch Enables and disables hub mode operation. See “Establishing communication” on page 19 for
2
LINE IN/OUT jacks When used as a wireless sender, plug an audio source device into the LINE IN jack.
3
USB jack When used as a wireless sender, connect to the USB jack of your computer to send the audio from
4
DC IN jack Plug the AC power adapter into this jack.
5
more information.
When used as a wireless receiver, plug your amplifier or amplified speakers into the LINE OUT
jack. Note, this device operates as both a wireless sender and wireless receiver, so you can use it
simultaneously to send and receive audio on your Rocketboost network.
your computer to the Rocketboost wireless receivers.
10
Wireless speaker — front
M
U
L
O
E
standby
1
SOURCE
2
3
4
4
# Feature Description
Standby indicator Turns red when the wireless speaker is in standby mode.
1
Power/ Join indicato r The indicator will light solid blue when the speaker is joined to a Rocketboost hub device,
2
Power on/
3
Standby/Join
Source button Press to select different audio streams on your Rocketboost network. Each press moves to
4
Source indicator Turns blue when receiving audio from a Rocketboost wireless sender. Blinks slowly if the
5
Volu me co ntrol knob Turn this knob to increase or decrease the volume.
6
BASS button Press to enable/disable BASS enhancement.
7
Remote control sensor Receives the signal from the remote control.
8
if it is not joined, it will flash slowly. When the speaker is put in joining mode, the
indicator will flash rapidly.
Press to turn the wireless speaker on. Press and hold to initiate joining. Press again to go
to standby mode. When you connect the AC power adapter, the device turns on
automatically.
the next source.
current source listened to is muted.
Note: This indicator will not be lit if the Rocketboost wireless sender is turned off. Press
the SOURCE button to find the next available source.
V
5
BASS
IR
86
7
11RF-RBWS01
Wireless speaker — back
1
# Featur e Description
DC IN jack Plug the AC adapter into this jack.
1
Speaker cable Connected to the left speaker.
2
DC IN
15V/1.5A
2
12
Remote control
/
/
USBInLINE
In
DEVICE STREAM ALL
TM
# Feature Description
1
/| Standby/On button
// (Previous,
Play/Pause, Next)
2
Volume buttons (device)
3
BASS button Press to enable/disable the BASS enhancement.
4
USB In Press to listen to the audio from the device connected to the USB jack of your
5
Line In Press to listen to the audio from the device connected to the LINE IN jack of your
6
Volu me b uttons (st ream)
7
Press to turn the wireless speaker system on. Press again to enter standby mode.
Skip to the previous track. Play or Pause a track. Skip to the next track.
These playback controls will only work when you connect the wireless
sender/receiver to a computer's USB port. The playback controls will work for
Windows Media® Player and iTunes, but may not work with other software. When
using these controls, point the remote at the wireless speaker or other Rocketboost
receiver where you are listening to the audio stream.
Press to adjust the volume on the wireless speaker. The wireless sender/receiver is a
line-level device, so volume cont rols are not supported on it. In that case the volume
on the local amplifier or powered speakers connected to the wireless
sender/receiver must be adjusted when listening to the wireless sender/receiver
line-level out.
wireless sender/receiver.
wireless sender/receiver.
Press to adjust the volume of all devices receiving the same audio stream.
13RF-RBWS01
# Feature Description
(mute - all)
8
Next Source button Press to select different audio streams on your Rocketboost network. Each press
9
Press to mute all audio streams in your Rocketboost network. Pressing mute again
at any Rocketboost wireless receiver will “unmute” the stream that was last heard at
that wi reless recei ver. This s tream can n ow be heard f rom any othe r wireless re ceiver
that was receiving that stream. Other streams are unmuted in the same way:
pressing mute again at each wireless receiver will unmute the stream that was last
heard at that receiver.
moves to the next source.
If you have connected the wireless sender/receiver to your computer
with a USB connection, you can use the three playback buttons on
the remote control to skip to the previous/next track or play/pause a
track. When using these buttons, point the remote at the wireless
speakers where you are listening to the audio. Note that the playback
buttons will work for songs played on the computer with Windows
Media Player and iTunes, but may not work with other software.
Setting up your wireless speaker system
Initial setup
To set up your wireless sender/receiver:
1 Unpack the package contents.
2 Adjust the antennas.
14
Tip: In some cases, you may improve range by rotating both antennas to create a 180°
angle.
Note: Make sure that the device is located at least 18” (.46 m) from any WiFi router.
Connecting the AC adapter to the wireless speaker
To connect the AC adapter to the wireless speaker:
• Connect the AC power adapter to the wireless speaker and plug into an
AC power outlet. The wireless speaker system turns on automatically.
DC IN
15V/1.5A
DC IN
15V/1.5A
Back of right speaker
15RF-RBWS01
Connecting your wireless sender/receiver
Note: Make sure that the device is located at least 18” from any WiFi router.
To connect the wireless sender/receiver to an audio source and AC power:
1 Connect your audio source to the LINE In jack or USB jack on the rear of
the sender, using the 3.5 mm audio cable or the USB cable. If necessary,
you can also use the 3.5 mm to RCA adapter, if your audio device uses
RCA-type line out connectors. You can select either USB-In or LINE-In
operation using the remote control, depending on which audio input
you are using.
3.5 mm cable (supplied)
3.5 mm cable and 3.5 mm to RCA adapter (supplied)
To U SB j ack
USB cable (supplied)
2 Remember to turn the volume up on your source device to at least 80%
of its maximum volume if connected to a headphone output.
3 Connect the AC power adapter to the wireless sender/receiver and plug
into an AC power outlet. The wireless sender/receiver automatically
turns on and the power indicator turns green.
To audio output jack
16
Notes:
- Make sure that the AC power outlet matches the wireless sender/receiver’s AC input
(100-240V) before connecting.
- Connect the AC power adapter to an AC power outlet only after all other
connections are completed.
4
Select either USB-In or LINE-In using the remote control, depending on
which audio input you are using.
Setting up and using your remote control
To set up and use your remote control:
1 Remove the insulation sheet in the battery tray before using the remote
control for the first time.
2 Aim the remote control at the IR sensor on the front from a maximum
distance of 23 ft. (7 m) away and a maximum angle of +/- 30 degrees
from the center line.
In
LINE
USB
In
The remote control can be used with both the wireless sender/receiver
and the wireless speaker, depending on the remote control function
being used.
17RF-RBWS01
To replace the battery:
1 Press the battery tray lock to the right, then slide out the battery tray. You
can remove the battery door with your fingernails by using the spaces
set back in the remote control.
2 Match the polarity on the battery with a plus sign (+) on the battery tray.
Replace the battery with a CR2025 or equivalent.
3 Slide the tray with the new battery into the battery compartment until it
clicks into place.
Warni ngs:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type of battery.
Notes:
Remove the battery from the remote control when it is not to be used for a long
period. Otherwise it might be damaged due to battery leakage.
Do not drop or jar the remote control.
Do not spill water or any liquid on the remote control.
Do not place the remote control on a wet object.
Do not place the remote control under direct sunlight or near sources of excessive
heat.
18
Using your wireless speaker system
Turning on the wireless sender/receiver and wireless speaker
To turn the wireless sender/receiver on and off:
1 When initially connecting to an AC outlet, the device automatically turns
on. To turn off the device, press . The power indicator turns off and the
standby indicator turns red.
2 If the wireless sender/receiver is off, press to turn it on. The power
indicator lights.
To turn the wireless speaker on and off:
1 When initially connecting to an AC outlet, the device automatically turns
on. To turn off the device, press . The power indicator turns off and the
standby indicator turns red.
2 If the wireless speaker is off, press to turn it on. The power indicator
lights.
Establishing communication
Rocketboost products form an audio network and each Rocketboost
receiver can select the audio from any Rocketboost sender in the
network.
Important
Every Rocketboost network must contain one hub device, which
helps devices join the network. The network can have only one hub,
which you can enable using the hub switch on the back of all
Rocketboost senders and wireless sender/receivers.
If this is your first Rocketboost product, you should make the wireless
sender/receiver the hub, if you already have Rocketboost products,
you should disable hub mode on this device.
Important: Hub devices must always have power for your network to operate. The hub
device can be in standby (power saving) mode, but must stay plugged in.
19RF-RBWS01
Is this your first Rocketboost product?
YES - If this is your first Rocketboost enabled product, you can skip
this section because your wireless sender/receiver and speaker were
previously joined or connected at the factory. To learn how to use
your speakers, see “Listening to music” on page 23.
Note: If you do need to rejoin the wireless sender/receiver and the wireless speaker, see
“Joining the wireless sender/receiver to the wireless speaker” below.
NO - If this is not your first Rocketboost enabled product, proceed to
“Joining the wireless sender/receiver and wireless speaker to an
existing Rocketboost network” on page 22.
Joining the wireless sender/receiver to the wireless speaker
The wireless sender/receiver and the wireless speaker must be
“joined” or wirelessly connected to each other, so that audio can be
sent from the wireless sender/receiver to the speaker.
Note: Use this procedure only if you need to rejoin the wireless sender/receiver and
wireless speaker and this is your only Rocketboost-enabled product.
To join the wireless sender/receiver to the wireless speaker:
Wireless sender/receiver
Wireless speaker
(HUB: ENABLE)
20
1 Set the HUB switch on the wireless sender/receiver to ENABLE if this is your
first Rocketboost product set.
• The power indicators turn green when the HUB switch is set to ENABLE.
• The power indicators turn blue when the HUB switch is set to DISABLE.
2 Press and hold the button on the wireless sender/receiver for more
than three seconds to put it into joining mode. The power indicator
starts blinking rapidly and the unit will stay in joining mode for 30
seconds.
Power on
indicator
3 Press and hold the button on the wireless speaker for more than three
seconds so the wireless sender/receiver and wireless speaker enter
joining mode.
Power on
indicator
• The power indicators light steadily if the joining was successful.
• The power indicators blink slowly if the joining was not successful.
Note: Rocketboost devices have their own memory. After the devices are joined once,
they will remember each other and join automatically when your devices are
powered on again. Because of this, you can join all of your network components in
the same room before installing them in their permanent locations throughout the
house.
21RF-RBWS01
Joining the wireless sender/receiver and wireless speaker to an existing Rocketboost network
Use this procedure only if you are adding this product to an existing
Rocketboost network.
You need to join both the wireless sender/receiver and the wireless
speaker to your existing hub device, using the following steps.
To join an existing Rocketboost network:
RF-RBUSB or other
Rocketboost device.
(HUB: ENABLE)
Wireless sender/receiver
Wireless speakers
1 Set the HUB switch on the wireless sender/receiver to DISABLE.
• The power indicators turn green when the HUB switch is set to ENABLE.
• The power indicators turn blue when the HUB switch is set to DISABLE.
2 Press and hold the POWER button on the your Rocketboost Hub device for
more than three seconds to put it into joining mode. The power
indicator starts blinking rapidly and the unit will stay in joining mode for
30 seconds.
3 Press and hold the button on the wireless sender/receiver for more
than three seconds so the Hub device and wireless sender/receiver enter
joining mode.
• The power indicators light steadily if the joining was successful.
• The power indicators blink slowly if the joining was not successful.
(included with speaker)
(HUB: DISABLE)
22
4 Press and hold the POWER button on the your Rocketboost Hub device for
more than three seconds to put it into joining mode. The power
indicator starts blinking rapidly and the unit will stay in joining mode for
30 seconds.
5 Press and hold the button on the wireless speaker for more than three
seconds so the Hub device and wireless speaker enter joining mode.
• The power indicators light steadily if the joining was successful.
• The power indicators blink slowly if the joining was not successful.
Note: Rocketboost devices have their own memory. After the devices are joined once,
they will remember each other and join automatically when your devices are
powered on again. Because of this, you can join all of your network components in
the same room before installing them in their permanent locations throughout the
house.
Listening to music
To listen to music:
1 Turn on the wireless sender/receiver and wireless speaker. The power
indicator LEDs should light steadily. If they are blinking you need to
rejoin the wireless sender/receiver and wireless speaker. See
“Establishing communication” on page 19.
2 Select either USB-In or LINE-In using the remote control, depending on
which audio input you are using.
3 Play music from the audio device or your computer connected to your
wireless sender/receiver and listen to it from the wireless speaker.
4 Adjust the volume level on your wireless speaker. If you have multiple
audio sources in your Rocketboost network, press the Source button on
the wireless speaker to hear the next audio source. Press the Source
button again to cycle through all available audio sources.
23RF-RBWS01
Controlling the device volume
The volume of the wireless speaker can be changed.
To change the volume of the wireless speaker:
• Aim the remote control at the wireless speaker and press the DEVICE
volume buttons on the remote control, or turn the volume knob on the
wireless speaker to adjust the volume.
Controlling the stream volume
Rocketboost systems have a special mode where you can change the
volume of the audio stream sent by a sender. Then the volume level
at each receiver that is receiving that audio stream will change
automatically. This is useful if you want to easily change the volume
level at all the receivers that are receiving the same audio stream.
To change the stream volume:
• Aim the remote control at the sender and press the STREAM volume
button on the remote control.
TM
24
TM
Muting all devices
Rocketboost also features a global mute feature that instantly
silences all audio streams in the network.
To mute all devices in the network:
1 Press ALL (mute) on the remote control. All audio streams in your network
are muted.
2 Pressing ALL (mute), while aiming at a specific Rocketboost wireless
receiver, will “unmute” the stream that was last heard at that wireless
receiver. This stream can now be heard from any other wireless receiver
that was receiving that stream. Other streams are unmuted in the same
way: pressing ALL (mute) again at each wireless receiver will unmute the
stream that was last heard at that wireless receiver.
Turning off the system
To turn off the system:
1 Press on the wireless sender/receiver to turn off the unit.
• The power indicator turns off and the standby indicator lights red.
• Remove the AC power adapter from the AC power outlet to power off
the device completely.
2 Press to turn off the wireless speaker. The power indicator goes off.
Notes:
- If there are other wireless senders and wireless receivers in the network, you must
keep your Hub powered on. The hub can be in standby, but it needs to be connected
to the AC adapter.
- The device has its own memory. After the wireless sender/receiver and wireless
speaker are paired once, they will remember each other and join automatically when
the wireless sender/receiver and the wireless speaker are powered on again.
TM
25RF-RBWS01
To stop sending audio from the wireless sender:
• Remove the 3.5 mm plug and the USB connector from the back of the
device and the wireless sender/receiver automatically stops sending. The
Sender Mode indicator will go out.
Expanding your Rocketboost System
Rocketboost technology is expandable. Each Rocketboost Receiver
can select the audio from any Sender in your Rocketboost audio
network. The following shows an example Rocketboost network. You
can set up your network to meet your specific needs.
RF-RBKIT
RF-RBWHP01
Wireless Stereo Headphones
(Headphones are Rocketboost
Wireless Receiver, Charging base
is Rocketboost Wireless Sender)
Wireless sender/receiver
(Rocketboost Wireless
Sender/Receiver)
RF-RBUSB
Wireless HD Audio Star ter Kit
(Rocketboost Wireless
Sender shown)
RF-RBWS01
Wireless speakers
(Rocketboost Wireless
Receiver)
26
• The Rocketboost Wireless Outdoor Speaker (RF-RBWS02) includes a
wireless outdoor speaker and the wireless sender/receiver (RF-RBAUX).
Audio sources connected to the wireless sender/receiver can be listened
to using the wireless speaker.
• The Rocketboost Wireless Speaker (RF-RBWS01) includes a wireless
speaker and a wireless sender/receiver (RF-RBUSB). Audio sources
connected to the wireless sender/receiver can be listened to using the
wireless speaker.
• The Rocketboost Wireless Sender/Receiver (RF-RBUSB) can be used
as both a wireless sender and a wireless receiver. As a wireless sender
you can connect it to your other audio source devices (like home theater
or MP3 player) and then receive that audio using your outdoor wireless
speaker or any other Rocketboost wireless receiver. As a wireless receiver
you can connect it your stereo system or amplified speakers and then
listen to the audio from any other Rocketboost wireless sender.
• The Rocketboost Amplified Audio Receiver (RF-RBREC) is an
amplified wireless receiver. You connect speakers to this and then listen
to audio from any of your Rocketboost wireless sender devices. This is a
great way to expand your Rocketboost system to listen to your music
anywhere in the house.
• The Rocketboost Wireless HD Starter Kit (RF-RBKIT) includes a
wireless sender device and the RF-RBREC, amplified wireless receiver.
This product can be used for home theater wireless surround sound of
for multi-room audio.
• The Rocketboost Wireless Headphones (RF-RBWHP01) include a
wireless sender device and wireless headphones. Audio sources
connected to the wireless sender can be listened to using the wireless
headphones.
For more information, and to see what other Rocketboost products
are available, visit www.rocketboost.com.
Rocketboost Network Capabilities
The maximum number of Rocketboost devices in a Rocketboost
Network is 9. If you already have 9 devices and attempt to join
another one, then joining will fail for the new device.
Note: If you want to remove a device from your Rocketboost network you need to
rejoin it to a different hub device (this basically creates a 2nd Rocketboost network).
The maximum number of audio streams that can be sent
simultaneously on the Rocketboost network is:
• 5 stereo CD quality -or-
• 1 stereo HD quality + 3 CD quality -or-
• 2 stereo HD quality + 2 stereo CD quality -or-
• 3 stereo HD quality
Note: HD streams are available if using the wireless sender. If your system is in a
maximum audio stream state, then the Sender Mode indicator (marked Tx) will not
light on the wireless sender devices that have exceeded the maximum. To use those
device's audio streams, you need to turn off one of your other wireless senders.
27RF-RBWS01
Maintaining your system
Use a soft cloth dampened with a weak solution of mild detergent
and water. Dry the device immediately afterwards with a clean cloth.
Do not use abrasive cloth, thinners, alcohol, or other chemical
solvents, because they may damage the finish or remove the panel
lettering.
Cautions:
Do not block the ventilation openings.
If the power cord is damaged, it must be repaired by a qualified technician.
Troubleshooting
Check this information for a possible solution before calling for
assistance.
General troubleshooting
• Every Rocketboost network must contain only one hub device, which
helps other Rocketboost devices join the network.
• You can turn any Rocketboost wireless sender or wireless
sender/receiver into a hub by using the HUB STATUS or HUB ENABLE
switch on the back of the device. The network can only have one hub.
• The hub device must have power for the audio network to operate.
The hub can be in standby (power-saving mode), but must remain
plugged in.
• The existing hub device will be the device with the green power
indicator.
• The unobstructed operating range of a Rocketboost network is 150 feet
(45 meters).
• Each network must contain both a wireless sender device and a wireless
receiver device. Do you have both a wireless sender and a wireless
receiver device?
28
Problem Solution
No communication between the
Rocketboost sender and receiver
devices.
No sound • Check the volume level of the wireless speaker or audio sources connected to the
My Rocketboost remote will not
control the volume. I can’t turn
the volume up or down.
The sound/audio is really quiet
coming out of my wireless
speakers.
Sound interference • Experiment with different orientations or locations of your wireless sender device.
Cannot play audio from a
computer
• Make sure that the power indicators of the Rocketboost wireless sender and wireless
receiver devices are lit solidly. If the indicators are blinking, see “Establishing
communication” on page 21.
• If the joining process is failing, make sure that only one of your Rocketboost devices has
the Hub switch enabled. Note that the hub device will be the only device with the
green power indicator. Non-hub devices have a blue power indicator.
wireless sender.
• Make sure that all of the audio cables are connected correctly.
• Make sure that the power indicators of the Rocketboost wireless sender and wireless
receiver devices are lit solidly. If the indicators are blinking, see “Establishing
communication” on page 19.
• Make sure the audio source connected to your wireless sender is On.
• Ma ke sure the wirel ess sender or wireless receiver devices are not Muted. The Receive
Mode indicator (marked Rx) light blinks when the device is muted.
• When using computer USB audio, make sure your computer audio volume is turned up
and not muted. Depending on your computer and operating system you may have to
adjust this in the operating system volume settings or in the application you are using
(for example, Windows Media Player).
• Make sure you have removed the insulation sheet in the battery tray of the Rocketboost
remote.
• To maximize your volume level through the system, make sure your source devices (i.e.,
A/V receiver, iPod, etc.) have their volume turned up to at least 50% of their volume
level.
• The battery in your remote may be dead. Try replacing it with a new battery.
• To maximize your volume level through the system, make sure your source devices (i.e.,
A/V receiver, iPod, etc.) have their volume turned up to at least 50% of their volume
level.
• Make sure your wireless sender device is more than 18 inches from any WiFi routers you
may have.
• Shorten the distance between the Rocketboost wireless devices. The maximum
distance is 150 feet (45 m), but this distance will be reduced as the wireless signal
passes through walls or other obstructions.
• It is possible other devices like cordless phones, microwaves, wireless routers, etc. may
be causing interference. Try turning one device off at a tim e to determine whi ch device
is causing interference.
• If your cordless phone or wireless router is causing interference try changing the
channel it is using. Please refer to your device’s owner manual.
• Make sure that the USB cable is connected to the wireless sender/receiver and your
computer correctly.
• Make sure that you have selected the USB jack as the audio input source by pressing
USB-In button on the remote control.
29RF-RBWS01
Specifications
Wireless sender/receiver
Power supply
Maximum line-level input signal level
Maximum line-level output signal level
Output loading
Signal-to-noise ratio
Dimensions (W × H × D)
Wei ght
Wireless Speaker
Power supply (AC to DC adapter)
Signal-to-noise ratio
Speaker impedance
Rated output power (THD)
Dimensions (W ×H × D)
Wei ght
Legal notices
FCC and IC Information:
This device complies with Part 15 of the FCC Rules and RSS-210 of the
IC Rules. This device also complies with Industry license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
5 V, 600 mA
2.0 Vrms
1.0 Vrms
10 kohm
90 dB
9.1 × 3.4 × 1.8 inches
(230 × 86 × 46 mm)
4.7 oz. (134 g)
15 V, 1.5 A
90dBA +/-3dBA
4 ohms
7 W x 2 @ 1% THD
4.2 × 8.0 × 5.6 inches
(10.6 × 20.4 × 14.3 cm)
3.2 lbs. (1.45 kg)
30
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC & IC Radiation Exposure Statement
This equipment complies with FCC/IC radiation exposure limits set
forth for an uncontrolled environment and meets the exemption
from the routine evaluation limits in section 2.5 of RSS 102.
1. This Transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF/IC radiation exposure limits
set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
The device meets the exemption from the routine evaluation limits in
section 2.5 of RSS 102 and users can obtain Canadian information on
RF exposure and compliance from the Canadian Representative
Richardson Technical Services Inc., Suite 304, 131 Wurtemburg St.,
Ottawa, Ontario, Canada. Tel: 613 562 3827
Rocketboost is a trademark of BBY Solutions, Inc.
31RF-RBWS01
Information for Users on Disposal of Old Equipment
European Union
Note: This symbol is only valid in the European Union.
This symbol indicates that the electrical and electronic
equipment should not be disposed as general household
waste at its end-of-life. Instead, the product should be
handed over to the applicable collection point for the
recycling in accordance with your national legislation.
By disposing of this product correctly, you will help to
conserve natural resources and will help prevent potential negative
effects on the environment and human health that could otherwise
be caused by inappropriate waste handling of this product. For more
information about collection point and recycling of this product,
please contact your local municipal office, your household waste
disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
Other Countries Outside the European Union
If you wish to dispose of this product, please do so in accordance
with applicable national legislation or other rules in your country for
the treatment of old electrical and electronic equipment.
32
One-year limited warranty
Rocketfish Products (“Rocketfish”) warrants to you, the original purchaser of this new
RF-RBWS01 (“Product”), that the Product shall be free of defects in the original manufacture of
the material or workmanship for one (1) year from the purchase of the Product (“Warranty
Period”). This Product must be purchased from an authorized dealer of Rocketfish brand
products and packaged with this warranty statement. This warranty does not cover refurbished
Product. If you notify Rocketfish during the Warranty Period of a defect covered by this
warranty that requires service, terms of this warranty apply.
How long does the coverage last?
The Warranty Period lasts for one year (365 days), beginning on the date you purchased the
Product. The purchase date is printed on the receipt you received with the product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship of the
Product is determined to be defective by an authorized Rocketfish repair center or store
personnel, Rocketfish will (at its sole option): (1) repair the Product with new or rebuilt parts; or
(2) replace the Product at no charge with new or rebuilt comparable products or par ts. Products
and parts replaced under this warranty become the property of Rocketfish and are not returned
to you. If service of Products and parts are required after the Warranty Period expires, you must
pay all labor and parts charges. This warranty lasts as long as you own your Rocketfish Product
during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the
Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your original receipt and the Product
to the store you purchased it from. Make sure that you place the Product in its original
packaging or packaging that provides the same amount of protection as the original
packaging. If you purchased the Product from an online web site, mail your original receipt and
the Product to the address listed on the web site. Make sure that you put the Product in its
original packaging or packaging that provides the same amount of protection as the original
packaging.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the Product in the United States, Canada,
and Mexico.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction
• Installation
•Set up adjustments
•Cosmetic damage
33RF-RBWS01
• Damage due to acts of God, such as lightning strikes
• Accident
• Misuse
•Abuse
•Negligence
• Commercial use
• Modification of any part of the Product, including the antenna
This warranty also does not cover:
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage supply
• Attempted repair by anyone other than a facility authorized by Rocketfish to service the
Product
• Products sold as is or with all faults
• Consumables, such as fuses or batteries
• Products where the factory applied serial number has been altered or removed
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.
ROCKETFISH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT
NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST
PROFITS. ROCKETFISH PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO
THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD
SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER
THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Rocketfish:
For customer service please call 1-800-620-2790
www.rocketfishproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645
© 2011 BBY Solutions, Inc.
All rights reserved. ROCKETFISH is a trademark of BBY Solutions, Inc. Registered in some
countries. All other products and brand names are trademarks of their respective owners.
34
For model number RF-RBWS01-05A:
Distributed by: Best Buy Europe Distributions Limited. 1 Portal Way, London W3 6RS
Freephone number for Rocketfish products: 0800 389 1120
www.rocketfishproducts.com (800) 620-2790
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN 55423-3645 USA
All rights reserved. ROCKETFISH is a trademark of BBY Solutions, Inc.
All other products and brand names are trademarks of their respective owners.
© 2011 BBY Solutions, Inc.
Distributed by: Best Buy Europe Distributions Limited. 1 Portal Way, London W3 6RS
For model number RF-RBWS01-05A:
Freephone number for Rocketfish products: 0800 389 1120
11-0202
ENGLISH
Loading...