Congratulations on your purchase of the Rocketboost™ Wireless
Amplified Audio Receiver. This product represents the state of the art
in 2.4 GHz wireless audio design. When used with other Rocketboost
products you can enjoy your music throughout your house without
the limitations of cables.
3RF-RBREC
This Rocketboost wireless receiver comes with a built in audio
amplifier. As an amplified wireless receiver you connect it to your
speakers and then listen to the audio from any other Rocketboost
wireless sender. By using other Rocketboost wireless audio products,
you can also configure multiple audio streams and listen to any of
those audio streams at any Rocketboost wireless receiver device.
This Rocketboost product can receive signals from Rocketboost
wireless senders that are up to 150 feet away. The audio signal is
uncompressed digital audio so your audio is the highest quality and
is free from interference.
This User Guide explains how to correctly install, operate, and get the
best performance from your Rocketboost Wireless Amplified Audio
Receiver. Read this guide carefully before installing your system, and
then keep it handy for quick reference.
Package contents
The box should contain the following:
Remote control
4
Wireless receiver
AC power cord
Speaker cable (2)
User Guide
Cable spool
Quick Setup Guide
Important safety instructions
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of
uninsulated "dangerous voltage" within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK:
DO NOT REMOVE SCREWS, COVERS OR THE CABINET.
NO USER SERVICING PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8 Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
5RF-RBREC
10 Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Unplug this apparatus during lightning storms or when unused for long
periods of time.
13 Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14 To reduce the risk of fire or electric shock, do not expose this device to
rain, moisture, dripping, or splashing, and no objects filled with liquids,
such as vases, shall be placed on it.
15 The wall plug is the disconnecting device. The plug must remain readily
operable.
16 Batteries should not be exposed to excessive heat such as sunshine, fire,
or the like.
Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
Warni ng: Read the Rating Label on the bottom of the unit for power input and other
safety information.
Caution - Proper Installation
Install the system in a place which is level, dry and neither too hot nor too cold. The
appropriate temperature is between 5° C and 35° C.
Install the system in a location with adequate ventilation to prevent internal heat
from building up inside the unit.
6
Proper ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate
the apparatus as follows:
Front: No obstructions and open spacing.
Sides/Top/Back: No obstructions should be placed in the areas shown
by the dimensions below.
Bottom: Place on the level surface. Maintain an adequate air path for
ventilation by placing on a stand with a height of 3-15/16" (10 cm) or
more.
Front view
15
5-
/16"
(15 cm)
Side view
5(15 cm)
15
(10 cm)
/16"
3-
What is Rocketboost™?
Rocketboost™ is expandable wireless digital audio.
• Products with Rocketboost™ technology let you easily expand your
listening experience throughout your home.
• Rocketboost™ does not interfere with other wireless products in your
home.
• Rocketboost™ is uncompressed digital audio compatible with all audio
formats such as Dolby® TrueHD, and DTS-HD Master Audio used with
Blu-ray.
When you see the Rocketboost™ logo on any product,
it has been designed to work with other
Rocketboost™ products, no matter who manufactures
them.
15
/16"
5-
(15 cm)
15
/16"
15
/16"
5-
(15 cm)
7RF-RBREC
How does Rocketboost™ work?
Rocketboost technology can connect all audio devices throughout
your home to form a home audio network.
Rocketboost products include “Wireless Senders,” which send or
transmit audio streams, and “Wireless Receivers,” which receive the
audio. This lets you listen to music from your wireless sender in other
rooms using your wireless receiver.
Rocketboost is expandable. Each Rocketboost wireless receiver can
select the audio from any wireless sender in your Rocketboost audio
network. The following shows an example Rocketboost network. You
can set up your network to meet your specific needs.
RF-RBKIT
(wireless sender)
RF-RBREC
(wireless receiver)
RF-RBAUX
(wireless sender/receiver)
RF-RBWS02
(wireless receiver)
We hope you enjoy your new Rocketboost system. Remember that
it’s designed to grow with your home entertainment needs, and that
it’s easy to add a new device to the network as you expand your
system.
Features
• High-Performance Audio - Uncompressed digital CD-quality sound,
adjustable volume control
• Strong Wireless Signal - 150 ft. wireless range (maximum, line of sight),
great sound, no static, won't interfere with your other wireless products
8
• Compatible with all Rocketboost products
• Easy to use - Easy to set up
• Two stereo channels with 42 W per channel, capable of driving any
non-powered speaker.
Front panel
9
TM
3
2
1
#FeatureDescription
Standby indicator Turns red when the wireless receiver is in standby mode.
1
Power/ Pair
2
button
Power/ Pair
3
indicator
BASS buttonToggles bass enhancement on or off. Bass enhancement increases the bass frequency
4
Bass indicatorLights when the bass enhancement is activated.
5
SOURCE indicator Lights when the wireless receiver is connected to an audio stream.
6
SOURCE button Press to select different audio streams on your Rocketboost network. Each press moves
7
HD indicatorLights when the wireless receiver is receiving HD audio signals.
8
IR sensor window Receives the signal from the remote control.
9
VOLUME knobControls the volume level.
10
Press to turn the wireless receiver on. Press and hold to initiate pairing. Press again to go
to standby mode.
The indicator will turn solid when it is paired in a network, if the device is not in a
network, the indicator blinks slowly. When the device is put in pairing mode, the
indicator blinks rapidly.
output of the system.
to the next source.
4
6
5
10
8
7
9RF-RBREC
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.