Rival 8804, 8806 User Manual

0 (0)
Rival 8804, 8806 User Manual

8804/8806/9100200000501 V.qxd 12/19/05 10:19 Page 1

SERVICE INSTRUCTIONS

1.Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the Warranty.

2.If you need to exchange the unit, please return it in its original carton, with a sales receipt, to the store where you purchased it. If you are returning the unit more than 30 days after the date of purchase, please see the enclosed Warranty.

3.If you have any questions or comments regarding this unit’s operation or believe any repair is necessary, please write to our Consumer Service Department or visit our website at www.rivalproducts.com

RIVAL

c/o JCS/THG, LLC

CONSUMER SERVICE DEPARTMENT 13120 JURUPA AVENUE

FONTANA, CA 92337

ONE (1) YEAR LIMITED WARRANTY

SAVE THIS WARRANTY INFORMATION

A.This Warranty applies only to the original purchaser of this product.

B.This Warranty applies ONLY to repair or replacement of any supplied or manufactured parts of this product that, upon inspection by JCS/THG, LLC authorized personnel, is shown to have failed in normal use due to defects in material or workmanship. JCS/THG, LLC will determine whether to repair or replace the unit. This Warranty does not apply to installation expenses.

C.Operating this unit under conditions other than those recommended or at voltages other than the voltage indicated on the unit, or attempting to service or modify the unit, will render this WARRANTY VOID.

D.Unless otherwise proscribed by law, JCS/THG, LLC shall not be liable for any personal injury, property or any incidental or consequential damage of any kind resulting from malfunctions, defects, misuse, improper installation or alteration of this product.

E.All parts of this product are guaranteed for a period of 1 year as follows:

1.Within the first 30 days from date of purchase, the store from which you purchased your product should replace this product if it is defective in material or workmanship (provided the store has in-stock replacement.) * If you intend to assert any claim in connection with the product, please follow the instructions in paragraph F.

2.Within the first twelve months from date of purchase, JCS/THG, LLC will repair or replace the product if it is defective in material or workmanship, subject to the conditions in paragraph G.

F.If you have any other problem or claim in connection with this product, please write to our Consumer Service Department.

G.IMPORTANT RETURN INSTRUCTIONS. Your Warranty depends on your following these instructions if you are returning the unit to JCS/THG, LLC:

1.Carefully pack the item in its original carton or other suitable box to avoid damage in shipping.

2.Before packing your unit for return, be sure to enclose:

a)Your name, full address with zip code and telephone number,

b)A dated sales receipt or PROOF OF PURCHASE,

c)A check for return prepaid shipping and handling, and

d)The model number of the unit and the problem you are having. (Enclose in an envelope and tape directly to

the unit before the box is sealed.)

3.JCS/THG, LLC recommends you ship the package U.P.S ground service for tracking purposes.

4.All shipping charges must be prepaid by you.

5.Mark the outside of your package:

RIVAL

c/o JCS/THG, LLC 13120 JURUPA AVENUE FONTANA, CA 92337

This Warranty gives you specific legal rights, and you may have other rights which vary by jurisdiction. The provisions of this Warranty are in addition to, and not a modification of, or subtraction from, the statutory warranties and other rights and remedies contained in any applicable legislation. To the extent that any provision of this Warranty is inconsistent with any applicable law, such provision shall be deemed voided or amended, as necessary, to comply with such law.

©2005 JCS/THG, LLC

Rival® and The Rival Logo® are trademarks of JCS/THG, LLC.

 

8804/8806/9100200000501

Printed in China

8804/880605EM2

Electric Ice Cream Maker

8804/8806

Owner’s Guide

READ AND SAVE THESE INSTRUCTIONS

8804/8806/9100200000501 V.qxd 12/19/05 10:19 Page 3

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

1.Read all instructions before using.

2.To protect against electrical shock, do not immerse cord, plug, or motor in water or other liquid.

3.Close supervision is necessary when any appliance is used by or near children.

4.Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

5.Avoid contacting moving parts.

6.Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been dropped or damaged in any manner. See warranty to return for examination, repair, or electrical or mechanical adjustment.

7.The use of accessory attachments (not recommended or sold by Rival®) may cause fire, electric shock or injury.

8.Do not use outdoors.

9.Do not let cord hang over edge of table or counter, or touch heated surfaces, including the stove.

10.Do not use appliance for other than intended use.

11.Do not operate your Ice Cream Maker dry. Always have ice cream mixture in the ICE CREAM CAN when you plug in your appliance.

12.The ICE CREAM CAN should be thoroughly towel dried after use and washing. If the ICE CREAM CAN is left to “air dry”, water spots may appear.

SAVE THESE INSTRUCTIONS

This appliance is for HOUSEHOLD USE ONLY. No user-serviceable parts inside. Power Unit never needs lubrication. Do not attempt to service this product.

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.

Do not attempt to modify the plug in any way. If the plug fits loosely into the AC outlet or if the AC outlet feels warm do not use that outlet.

-2-

-3-

8804/8806/9100200000501 V.qxd 12/19/05 10:19 Page 5

KNOW YOUR ICE CREAM MAKER

MOTOR DRIVE

MOTOR DRIVE

 

Top mounted. Engages stem of

 

DASHER and locks to bucket.

RUBBER CORK

RUBBER CORK

COVER

 

Used to plug hole in COVER

 

when hardening ice cream.

 

COVER

DASHER

 

Tab in COVER fits notch in ice

ICE CREAM CAN

 

cream can.

 

 

DASHER

BUCKET SLOTS

 

Stem on top fits through hole in

 

center of COVER, and engages

DRAIN HOLE

 

MOTOR DRIVE.

BUCKET

ICE CREAM CAN

Container holds ice cream mixture.

DRAIN HOLE

Allows salt water to flow freely out of BUCKET.

BUCKET

MOTOR DRIVE tabs secure BUCKET. DRAIN HOLE located near top of BUCKET. Holds rock salt and ice.

HOW TO USE YOUR ICE CREAM MAKER

NOTE: Before using for the first time, wash all parts except MOTOR DRIVE (see “HOW TO CLEAN YOUR ICE CREAM MAKER”).

1.Pour chilled ice cream mixture into cooled ICE CREAM CAN. Fill ICE CREAM CAN only 3/4 full, as mixture will expand during freezing.

2.Insert DASHER. Be sure that bottom of DASHER fits the indentation at bottom of ICE CREAM CAN.

3.Place COVER on ICE CREAM CAN.

 

MAKER SIZE

For best results use Rival® Rock Salt

4 Quart

6 Quart

 

ROCK SALT for making ice cream

3 Cups

4 Cups

ROCK SALT for hardening ice cream

2 Cups

3 Cups

 

 

 

CRUSHED ICE for making and hardening ice cream

5-10 lbs.

10-15 lbs.

 

 

 

4.Place filled ICE CREAM CAN in BUCKET. Make sure ICE CREAM CAN is centered and engages with bottom of BUCKET.

5.Place MOTOR DRIVE over ICE CREAM CAN so that stem of DASHER engages hole in bottom of MOTOR DRIVE. Rotate ICE CREAM CAN slightly until MOTOR DRIVE engages ICE CREAM CAN COVER. Fit the four tabs on the bottom of MOTOR DRIVE into holes at the top edge of the bucket. Rotate the MOTOR DRIVE counter clockwise to secure to bucket. Plug power cord into 120 volt AC outlet.

6.While ice cream maker is running, distribute 2 inches of ice around bottom of BUCKET. Sprinkle approximately 1/4 cup salt uniformly over layer of ice. (See “Important points”) NOTE: The DASHER does not move, the ICE CREAM CAN turns around it.

7.Continue adding layers of ice, with salt between layers, until ice level reaches top of rotating ICE CREAM CAN. NOTE: Should ice cream maker stop before churning is complete (approximately 20-40 minutes), check to see if large ice cubes are jammed against the rotating ice cream can. (See “Important Points”)

8.Ice cream should churn about 20-40 minutes or until motor stops. Unplug and remove MOTOR DRIVE.

9.Clear ice and salt away from top of ICE CREAM CAN. Wipe carefully to remove salt and water before removing the COVER. Lift out DASHER and scrape clean with a rubber spatula. Pack ice cream down into ICE CREAM CAN.

-4-

-5-

Loading...
+ 5 hidden pages