840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 1
TM
compact fabric steamer
plancha de vapor compacta para ropa
Customer |
Atención al |
|
|||
Assistance: |
|
Cliente: |
11560 |
||
1.866.321.9509 |
1.866.321.9509 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 2
IMPORTANT SAFEGUARDS
When using your appliance, basic precautions should always be followed, including the following:
1.Read all instructions.
2.Close supervision is necessary for any appliance being used by or near children. Do not leave appliance unattended while connected.
3.To reduce the risk of contact with hot water emitting from steam vents, check appliance before each use by holding it away from body and operating steam button.
4.Use appliance only for its intended use.
5.To reduce the risk of electric shock, do not immerse the appliance in water or other liquids.
6.Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
7.Do not allow cord to touch hot surfaces. Let appliance cool completely before putting away. Loop cord loosely around appliance or use cord wrap feature when storing.
8.Always disconnect appliance from electrical outlet when filling with water or emptying, and when not in use.
9.Do not operate appliance with a damaged cord, or if the appliance has been dropped or damaged. To reduce the risk of electric shock, do not disassemble or attempt to repair the appliance. Take it to a qualified service person for examination and repair. Incorrect reassembly or repair could cause a risk of fire, electric shock, or injury to persons when the appliance is used.
10.Burns could occur from touching hot metal parts, hot water, or steam. Use care when you turn a steam appliance upside down—there may be hot water in the reservoir.
11.To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit.
12.If an extension cord is absolutely necessary, a 15-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over.
13.WARNING! Shock Hazard: This appliance has a polarized plug (one wide blade) that reduces the risk of electric shock. The plug fits only one way into a polarized outlet. Do not defeat the safety purpose of the plug by modifying the plug in any way or by using an adapter. If the plug does not fit, reverse the plug. If it still does not fit, have an electrician replace the outlet.
SAVE THESE INSTRUCTIONS!
OTHER CONSUMER SAFETY INFORMATION
This product is intended for household use only.
Direct steam at clothing only. Directing steam toward any other surface may damage that surface.
•Do not steam clothes that are being worn.
•Do not use steam in the direction of people or pets.
2
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 3
PARTS AND FEATURES
BEFORE FIRST USE: REMOVE ALL PACKING MATERIALS FROM GARMENT STEAMER.
|
BRUSH |
|
ATTACHMENT |
|
3 |
2 |
|
|
4 |
|
Snap onto steam |
14 |
nozzle. |
1 |
CREASING |
13 |
ATTACHMENT |
|
5
|
|
Slide onto steam |
|
11 |
12 |
nozzle until it locks |
|
into place. |
|||
|
|
6
7
8
9
10
1. |
Flexible Steam Hose |
8. |
ON/OFF Switch |
2. |
Steam Nozzle/Handle |
9. |
Steam Nozzle Storage Hook |
3. |
Brush Attachment |
10. |
Power Cord |
4. |
Creasing Attachment |
11. |
Fill/Drain Hole |
5. |
Hose Base |
12. |
Fixed Vent Opening |
6. |
Carrying Handle |
13. |
Lint Brush |
7. Steam Hose Attachment Opening |
14. Door Hook |
||
3
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 4
ASSEMBLY AND STORAGE INSTRUCTIONS
BEFORE FIRST USE: REMOVE ALL PACKING MATERIALS FROM GARMENT STEAMER.
INSERTING HOSE INTO BASE:
Firmly grasp base of flexible steam hose. Insert into opening on steamer until it snaps into place. To remove hose, push in tabs on both sides and pull hose out.
WARNING! Burn Hazard: Escaping steam is hot. Ensure base of hose is fully inserted as directed. If steam is leaking around base of hose, turn off and allow to cool before attempting to adjust the base of hose.
CREASING ATTACHMENT
Use the Creasing Attachment to:
•Steam creases into pants, shirt cuffs, and collars
BRUSH ATTACHMENT
Use the Brush Attachment to:
•Steam upholstery, pillows, and other fabrics
•Freshen clothing and fabrics that have become “matted” over time
•Assist with lint removal while steaming
CORD WRAP
Secure the power cord around the cord wrap on the steamer base.
STORAGE
Wrap the flexible steam hose around the top of the steamer base and slide nozzle onto storage hook.
4
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 5
HOW TO STEAM
w WARNING BURN HAZARD.
Steam is hot. Always make sure unit is OFF when assembling attachments.
1 |
2 |
Fill with cool water UP TO MAX FILL LINE ONLY using the fill/drain hole. NEVER use fabric fresheners or other additives in the steamer.
3
NOTE: The fixed vent opening in the cover allows excess steam to escape.
5
Elevate spray nozzle by hanging on door hook. This avoids pooling of condensation in hose.
NOTE: Always elevate steam nozzle during heat-up and use.
The float ball will rise to the top of the tank when it reaches full capacity. IMPORTANT: Maximum capacity is 1 liter or 34 ounces. DO NOT OVERFILL.
4
Position door hook over top of a door.
6
Plug unit into electrical outlet. WARNING! Burn Hazard: Always place steamer on the floor during use. Hot water can leak from the steamer if tipped over.
5
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 6
HOW TO STEAM (CONT.)
7
Push ON/OFF switch to the ON (I) position. Wait at least 2 minutes for steam to start flowing from the steam nozzle.
8
Remove spray nozzle from door hook and replace with garment on a hanger.
9 |
10 |
Begin steaming at top of garment. Slowly move steam nozzle vertically up and down to cover entire garment. WARNING! Burn Hazard: Steam is hot. Always point nozzle away from yourself and others. Never steam clothes while they are being worn.
When finished, push ON/OFF switch to the OFF (O) position and unplug unit.
BEFORE EMPTYING OR STORING UNIT: Let cool completely. Water and steam are hot. Do not empty or store while unit is hot.
11
Once unit has completely cooled, empty remaining water from tank over sink using the fill/drain hole.
Tilt unit back 90°; then empty again, repeating process until all water is removed from tank.
12
Store cord using cord wrap.
6
Loading...