RISCO Group BWare BUS DT G2 User Manual [en, es]

Model:

RK515DTBGL

BWare BUS DT G2

EN50131-2-4, PD6662 :2010,

Grade 2, EC2

9-16VDC

12mA at 12VDC (typical)
34mA at 12VDC (max.)

mA

64mm (2.51")

120mm (4.72")

44mm (1.73")

100gr. (3.5oz.)

-20° to 55°C ( -4° to 131°F)

Humidit y of 85 ±5 perc ent at a
temperature of 30 ±2°C (86 ±4°F).

x 3

x 1

EN

Introduction and Features

The BWare BUS DT detector is a motion detector designed for
installation as an addressable detector on the RISCO BUS,
incorporating Anti-Cloak™ Technologies (ACT™).

• MW K-Band and PIR technologies

• Anti-Cloak Technology (ACT™)

• Green Line™ for disabling the MW during disarm

• Cover tamper

• Corridor and Curtain lenses (optional)

• Remote Control & Diagnostics

• 15m (90') coverage

IT

Introduzione e caratteristiche

BWare BUS DT AM è un rivelatore di movimento a doppia tecnologia
indirizzato compatibile con il BUS RISCO che include tecnologia Anti­Cloak™ (ACT™).

• Tecnologia a microonde (MW in banda K) e infrarosso
passivo (PIR)

• Tecnologia Anti-Cloak (ACT™)

• Funzione “Green Line” per disabilitare le emissioni della
sezione microonda a sistema disinserito

• Tamper contro l’apertura

• Lenti a Tenda e Corridoio (opzionali)

• Diagnostica e Controllo Remoto

• Modelli da 15m (90')

ES

Introducción y características

El detector BWare BUS DT AM es un detector de movimiento
diseñado para su instalación como detector direccionable en el BUS
de RISCO, que incorpora las tecnologías de Anti-Cloak™ (ACT™).

• Doble tecnología MW (Banda K) y PIR

• Tecnología Anti-Cloak (ACT™) para detectar intrusos camuflados

• GreenLine™ para deshabilitar el MW cuando el sistema

esté desarmado

• Sabotaje contra la apertura

• Lentes de Pasillo y Cortina (opcionales)

• Control y Diagnósticos Remotos

• Cobertura 15m (90')

FR

Introduction et caractéristiques

Le détecteur BWare BUS DT est un détecteur de mouvement destiné à
être installé en tant que détecteur adressable sur le BUS RISCO,
incorporant les technologies Anti-Cloak™ (ACT™).

• Technologies hyperfréquence Bande K et IR Passif

• Technologie Anti-Cloak™ (ACT™)

• Green Line™ pour désactiver l’hyperfréquence durant le

désarmement

• Sabotage contre l'ouverture

• Lentilles couloir et rideau (optionnelles)

• Contrôle et diagnostique à distance

• Couverture 15m (90')

PR

Introdução e características

O BWare BUS, detector AM de dupla tecnologia, é um detector de
movimento projetado para ser instalado como detector endereçável
ao RISCO Bus, incorporando tecnologia quanto Anti-Cloak ™.

• Tecnologia Anti-Camuflagem (ACT ™)

• Tecnologia GreenLine - Desativa MW (Microondas),quando o

sistema é desativado

• Sabotagem contra a abertura

• Lentes de longo alcance e Cortina (opcional)

• Controle e diagnóstico remoto

• Model o 15m (90')

4

RISCO BUS

12VDC

RED

+ 12 -

BLK

5

BUS ADDRESS

3

ID 1 2 3 4 5

01 OFF OFF OFF OFF OFF

02 ON OFF OFF OFF OFF

03 OFF ON OFF OFF OFF

2.1m-2.7m

(6'11"-8'10")

MIN

MAX

2

LONG

SHORT

LONG
15m (50’)

SHORT
6m (20’)

1

BUS

YEL

GRN

COM

Z1

04 ON ON OFF OFF OFF

05 OFF OFF ON OFF OFF

06 ON OFF ON OFF OFF

07 OFF ON ON OFF OFF

08 ON ON ON OFF OFF

09 OFF OFF OFF ON OFF

10 ON OFF OFF ON OFF

11 OFF ON OFF ON OFF

12 ON ON OFF ON OFF

13 OFF OFF ON ON OFF

14 ON OFF ON ON OFF

15 OFF ON ON ON OFF

16 ON ON ON ON OFF

17 OFF OFF OFF OFF ON

18 ON OFF OFF OFF ON

19 OFF ON OFF OFF ON

20 ON ON OFF OFF ON

21 OFF OFF ON OFF ON

22 ON OFF ON OFF ON

23 OFF ON ON OFF ON

24 ON ON ON OFF ON

25 OFF OFF OFF ON ON

26 ON OFF OFF ON ON

27 OFF ON OFF ON ON

28 ON ON OFF ON ON

29 OFF OFF ON ON ON

30 ON OFF ON ON ON

31 OFF ON ON ON ON

32 ON ON ON ON ON

N/C N/O EOL

N/C

N/O

N/C Tamper

Switch

N/C Alarm Relay

O
N

4.7K

DEOL

6.8K

1234

NO

5

4.7K

TEOL

N/C Tamper Switch

N/C Alarm Relay

4.7K

12K

6.8K

N/C FAULT/ AM Contact

EN

System Programming:

1. Add/delete a BWare BUS detector

• Installer menu [7] Accessories / Install > [1] Add Delete Module > [9] More.. > [5] BUS Zone.

• Select ID (as defined by the Dip switches) and define type as BDTG2.

2. Assign the BWare BUS detector to a Zone

• Installer menu [2] Zones > [1] One by One > Select Zone.

• Under Termination select > [5] BUS Zone.

• Select the BUS zone number to assign to the programmed zone.

3. Program the zone input on the BWare BUS

• Installer menu [2] Zones > [1] One by One > Select Zone.

• Under Termination select from options [07] to [11].

• Press [#]. Select the BUS zone that the input zone belongs to.

4. Configure the BWare BUS detector parameters.

• Installer menu select [2] Zones > [0] Miscellaneous > [3] BUS Zone Parameters. Refer to System Installation Manual.

IT

Programmazione Sistema:

ProSYS: 1. Aggiungi/cancella un rivelatore BUS BWare

• Menù Tecnico [7] Accessori > [1] Agg./Canc.Modulo > [9] Continua.. > [5] Zone BUS

• Selezionare il numero ID (come impostato dai microinterrutori) e definire il tipo come BDTG2

2. Assegnazione del rivelatore BUS BWare ad una Zona

• Menù Tecnico [2] Zone > [1] Una per Una > Selezionare il numero di zona

• Raggiunta l'opzione Terminazione selezionare > [5] Zona BUS

• Selezionare il numero ID della zona BUS da assegnare alla zona che si sta programmando

3. Programmazione dell'ingresso di zona aggiuntivo sul rivelatore BUS BWare

• Menù Tecnico [2] Zone > [1] Una per Una > Selezionare il numero di zona

• Raggiunta l'opzione Terminazione selezionare una delle opzioni da [07] a [11]

• Premere [#]. Selezionare il numero ID della zona BUS che fa riferimento all'ingresso di zona che si sta programmando

4. Configurazione dei parametri del rivelatore BUS Bware

• Nel Menù Tecnico selezionare [2] Zone > [0] Varie > [3] Parametri Zone BUS > Selezionare il numero di zona al
quale è stato assegnato il rivelatore. Fare riferimento al Manuale Tecnico della centrale per i parametri del rivelatore
LightSYS: 1. Aggiungi/cancella un rivelatore BUS Bware

• Menù Tecnico [7] Configurazione > [1] Accessori BUS > [2] Configurazione Manuale > [9] Zone-BUS

• Selezionare l’identificativo ID (come impostato dai microinterruttori) e definire il Tipo come BDTG2

3. Programmare l’ingresso di zona del rivelatore BWare BUS

• Una volta completata l’operazione descritta al punto 1, la centrale automaticamente chiederà se aggiungere alla
zona sucessiva l’ingresso di zona aggiuntivo del rivelatore

4. Programmare i parametri del rivelatore

• Menù Tecnico [2] Zone > [1] Parametri > [2] Per Parametro > [7] Avanzati > [4] Zone BUS > Selezionare il numero di
zona al quale è stato assegnato il rivelatore. Fare riferimento al Manuale Tecnico della centrale per i parametri del
rivelatore

ES

Programación Sistema:

1. Añadir/Borrar un detector BWare BUS

• Menú Instalador > [7] Accesorios > [1] Agregar/Borrar Módulo > [9] Más... > [5] Zonas BUS

• Seleccione el ID (según se haya definido con los microinterruptores DIP) y defina el tipo como BDTG2

2. Asignar el detector BWare BUS a una Zona

• Menú Instalador > [2] Zonas > [1] Una a Una > Seleccione la Zona

• En el apartado Terminación, seleccione la opción [05] Zona BUS.

• Seleccione el ID del detector BUS que se va a asignar a la zona programada.

3. Programar la entrada de zona adicional del BWare BUS

• Menú Instalador > [2] Zonas > [1] Una a Una > Seleccione la Zona.

• En el apartado Terminación, seleccione una de las opciones de la [07] a la [11].

• Presione [#]. Seleccione el ID del detector BUS al que pertenece la entrada de zona.

4. Configuración de los parámetros del detector BWare BUS.

• Menú Instalador > [2] Zonas > [0] Varios > [3] Parámetros Zona BUS. Consulte el manual de instalación del sistema

para la configuración de los parámetros del detector BUS.

FR

Programmation Système:

1. Ajout/Supp détecteur BWare BUS

• Menu Installateur [7] Accessoires / Installation > [1] Ajout/Supp Module > [9] Plus. > [5] Zone BUS.

• Sélectionner l’ID (défini par les Dip switches) et définir le type en BDTG2

2. Assigner le détecteur BWare BUS à une Zone

• Menu Installateur [2] Zones > [1] Une par Une > Sélectionner Zone.

• Dans Nature sélectionner > [5] BUS Zone.

• Sélectionner le numéro de la zone BUS à assigner à la zone programmée.

3. Programmer la zone d’entrée du BWare BUS

• Menu Installateur [2] Zones > [1] Une par Une > Sélectionner Zone.

• Dans Nature sélectionner les options [07] à [11].

• Appuyer sur [#].Sélectionner le numéro de la zone BUS à assigner à la zone programmée.

4. Configurer les paramètres du détecteur BWare BUS.

• Menu Installateur sélectionner [2] Zones > [0] Divers > [3] Param Zone BUS. Reportez-vous au manuel d'installation

du système pour les paramètres des détecteurs BUS.

PR

Programação da Sistema:

1. Adicionar/Apagar um detector BWare BUS

• Menu do instalador [7] Acessórios > [1] Adicionar/Apagar módulo > [9] Mais.. > [5] Zonas de BUS.

• Selecionar ID (como definido nos Dipswitches) e definir como o tipo BDTG2

2. Alocar o BWare BUS à uma zona

• Menu do Instalador [2] Zonas > [1] Uma a Uma > Selecionar Zona.

• No menu de Terminação selecione > [5] Zona de BUS.

• Selecione o número da zona de BUS para alocar a zona programada.

3. Programação da entrada de zona do BWare BUS

• Menu do instalador [2] Zonas > [1] Uma a uma > Selecionar Zona.

• No menu de terminação escolha uma das opções de [07] até [11].

• Apertar [#]. Escolher a zona de BUS que a entrada de zona pertence.

4. Configurar os parâmetros do detector BWare BUS.

• Selecionar o menu do instalador [2] Zonas > [0] Diversos > [3] Parâmetros de Zonas de BUS.

6

Wide Angle – Side View

Wide Angle – Top View

RL0004H (Wide Angle)

Corridor – Side View

Corridor – Side View

Corridor – Top View

3RL0025H (Corridor)

Curtain – Top View

Curtain – Side View

3RL0024H (Curtain)

EN

MW Sensitivity Portata Microonda

ES

Alcance del Microondas

FR

Sensibilité MW Alcance de microondas

IT

PR

LED Display

EN

State

LED

On

Yellow

Flashing
On

Green

Flashing
On

Blue

Flashing

All

Flashing

(consecutively)

LEDs

IT

Indicatori LED

Stato

LED

Illuminato

Giallo

Lampeggiante Anomalia del canale PIR
Illuminato

Verde

Lampeggiante
Illuminato ALLARME

Blu

Lampeggiante Problema di comunicazione

Tutti i

Lampeggiante
(consecutivamente)

LED

ES

Indicación de los LEDs

Estado

LED

Encendido

Amarillo

Parpadeando Problema en el canal PIR
Encendido Detección MW

Verde

Parpadeando
Encendido Indicación de ALARMA

Azul

Parpadeando Problema de comunicación

Todos

Parpadeando

los

(consecutivamente)

LEDs

FR

Affichage LED

Etat

LED

Allumée

Jaune

Clignotante
Allumée

Verte

Clignotante
Allumée

Bleu

Clignotante

Totalité

Clignotante

LED’s

(consécutivement)

PR

Visualizacão dos LEDs

Estado

LED

Aceso

Amarelo

Piscado
Aceso

Verde

Piscado
Aceso

Azul

Piscado

Todos os

Piscado

LEDs

(sucessivamante)

Description

PIR Detection
Trouble in PIR channel
MW Detection
Trouble in MW channel
Alarm
Communication Trouble
At power-up, the LEDs will flash consecutively
until the end of the warm-up period (2-3
minutes). At the end of the warm-up period the
BLUE LED will continue to flash until the end of
AM calibration.

Descrizione

Rilevazione del canale all’infrarosso passivo (PIR)

Rilevazione del canale a microonda (MW)

Anomalia del canale MW

All’alimentazione tutti i LED lampeggiano in
sequenza fino alla fine del periodo di
preriscaldamento (2-3 minuti). Alla fine del
periodo di preriscaldamento il LED BLU
continuerà a lampeggiare fino alla fine della
fase di inizializzazione del canale Anti-Mask.

Descripción

Detección PIR

Problema en el canal MW

Al dar alimentación, los LEDs parpadearán
consecutivamente hasta que finalice el
periodo de calentami ento (2-3 minutos). Al
finalizar el periodo de calentamiento, el LED
AZUL seguirá parpadeando hasta que termine
la calibración del AM.

Description

Détection IRP
Défaut canal IRP

Détection HF

Défaut canal HF

Alarme

Défaut de communication

Au démarrage, les voyants LED clignotent
successivement jusqu'à la fin de la période
d'échauffement (2-3 minutes). A la fin de la
période d'échauffement la LED bleue
continuera à clignoter jusqu'à la fin de
l'étalonnage AM.

Descricao

Detecção de Infravelmenho Passivo
Problema no canal Infravelmenho Passivo
Detecção no Microondas
Problema no canal Microondas
ALARME
Problema de comunicação
Ao conectar, os LEDs piscarão
consecutivamente até o final do período de
aquecimento (2-3minutos). Ao final do
período de aquecimento, o LED AZUL
continuará piscando até o final da iniciação
do AM.

7

EN FRIT PRES

Walk Test Test Sensore Prueba de detección Test de Marche Prova de Moviento

A B

2 Min. (Max)

= ON

FCC modular approval
Contains FCC ID UXS-IPM165F BWare RK515DTG3 FCC Compliance Section:
FCC Part 15 Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced radio/TV technician.

FCC Warning:

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Such modifications could void the user's authority to operate the equipment.

RISCO Group Limited Warranty

RISCO Ltd., its subsidiaries and affiliates (the "Seller") warrants its products to be free from defects in mate rials
and workmanship under normal use for 24 months from the date of production.

Because the Seller does not install or connect the product, and because the product may be used in conjunction
with products not manufactured by the Seller, the Seller cannot guarantee the performance of the security
system which uses this product.

The Seller's obligation and liability under this warranty is expressly limited to repairing and replacing, at the
Seller's discretion, within a reasonable time after the date of delivery, any product not meeting these
specifications.

The Seller makes no other warranty, expressed or implied, and makes no warranty of merchantability or of
fitness for any particular purpose.

Under no circumstances should the Seller be liable for any consequential or incidental damages for breach of
this or any other warranty, expressed or implied, or upon any other basis of liability whatsoever.

The Seller's obligation under this warranty shall not include any transportation charges or costs of installation or
any liability for direct, indirect, or consequential damages or delay.

The Seller does not warrant that the product may not be compromised or circumvented; that the product will
prevent any personal injury or property loss by burglary, robbery, fire or otherwise; or that the product will in all
cases provide adequate warning or protection.

The buyer/customer understands that a correctly installed and maintained alarm may only reduce the risk of
burglary, robbery or fire without warning, but is not an insurance or a guarantee that such an event will not
occur or that there will be no personal injury or property loss as a result thereof.

Consequently the Seller shall have no liability for any personal injury, property damage or loss based on a claim
that the product fails to give warning.

However, if the Seller is held liable, whether directly or indirectly, for any loss or damage arising under this
limited warranty or otherwise, regardless of cause or origin, the Seller's maximum liability shall not exceed the
purchase price of the product, which shall be a complete and exclusive remedy for the Seller.

No employee or representative of the Seller is authorized to change this warranty in any way or grant any other
warranty.

Batteries installed in or used with the products are explicitly excluded from this or any other warranty. Seller
gives no warranty whatsoever as to batteries and buyer's only remedy (if any) shall be in accordance with the
warranty provided (if and to the extent provided) by the manufacturers of batteries.

Contacting RISCO Group

RISCO Group is committed to customer service and product support. You can contact us through our
website www.riscogroup.com or as follows:

United Kingdom

Tel: [phone]
[e-mail]

Italy

Tel: [phone]
[e-mail]

Spain

Tel: [phone]
[e-mail]

France

Tel: [phone]
[e-mail]

© RISCO Group 09/2014 5IN2111 B

Belgium (Benelux)

Tel: [phone]
[e-mail]

USA

Tel: [phone]
[e-mail]

Brazil

Tel: [phone]
[e-mail]

Australia

Tel: + 1-800-991-542
[e-mail]

C

= 2 Min

D

China (Shanghai)

Tel: [phone]
[e-mail]

China (Shenzhen)

Tel: [phone]
[e-mail]

Poland

Tel: [phone]
[e-mail]

Israel

Tel: [phone]
[e-mail]