ReliOn BP100 Owner's Manual
BP3NL1-1PRL_0513-2
Automatic Blood Pressure Monitor
Instruction Manual
Table of contents
1. Introduction
1.1.Features of your blood pressure monitor
1.2.Important information about self-measurement
2. Important information on blood pressure and its measurement
2.1.How does high/low blood pressure arise?
2.2.Which values are normal?
2.3.What can be done if regular high/low values are obtained?
3. Components of your blood pressure monitor
4. Operation of your blood pressure monitor
4.1.Inserting the batteries
4.2.Tube connection
5. Measurement Procedure
5.1.Before measurement
5.2.Common sources of error
5.3.Fitting the cuff
5.4 Measuring procedure
5.5.Reading Recall – displaying the last measurement
5.6.Discontinuing a measurement
6. Error Messages/Troubleshooting
7. Care and Maintenance
8. Warranty
9. Certifications
10. Technical specifications
11. How to contact us
1
1. Introduction
1.1. Features of your automatic blood pressure monitor
Your blood pressure monitor is a fully automatic, digital blood pressure measuring
device for use on the upper arm, which enables very fast and reliable
measurement of the systolic and diastolic blood pressure as well as the pulse by
way of the oscillometric method. This device offers clinically proven accuracy and
has been designed to be user friendly.
Before using, please read this instruction manual carefully and then keep it in a
safe place. Please contact your doctor for further questions on the subject of
blood pressure measurement.
Attention!
1.2. Important information about self-measurement
• Self-measurement means Control, not diagnosis or treatment. Unusual
values must always be discussed with your doctor. Under no circumstances
should you alter the dosages of any drugs prescribed by your doctor.
• The pulse display is not suitable for checking the frequency of heart
pacemakers!
• In cases of irregular heartbeat, measurements made with this instrument
should only be evaluated after consultation with your doctor.
Electromagnetic interference:
The device contains sensitive electronic components. Avoid strong electrical or
electromagnetic fields in the direct vicinity of the device (e.g. mobile telephones,
microwave ovens). These can lead to temporary impairment of the measuring
accuracy.
2
2. Important information on blood pressure and its measurement
2.1. How does high/low blood pressure arise?
Your level of blood pressure is determined in the circulatory center of the brain
and adjusts to a variety of situations through feedback from the nervous system.
To adjust blood pressure, the strength and frequency of the heart (Pulse), as well
as the width of circulatory blood vessels is altered. Blood vessel width is affected
by fine muscles in the blood vessel walls.
Your level of arterial blood pressure changes periodically during heart activity:
During the “blood ejection” (Systole) the value is highest (systolic blood pressure
value). At the end of the heart’s “rest period” (Diastole) pressure is lowest
(diastolic blood pressure value). Blood pressure values must lie within certain
normal ranges in order to prevent particular diseases.
2.2. Which values are normal?
Blood pressure is too high if at rest, your diastolic pressure is above 100mmHg
and/or the systolic blood pressure is over 160mmHg. In this case, please consult
your doctor immediately. Long-term values at this level endanger your health due
to continual damage to the blood vessels in your body.
Should the systolic blood pressure values lie between 140mmHg and 159mmHg
and/or the diastolic blood pressure values lie between 90mmHg and 99mmHg,
consult your doctor. Regular self-checks will be necessary.
With blood pressure values that are too low (i.e. systolic values under 105mmHg
and/or diastolic values under 60mmHg), consult your doctor.
Even with normal blood pressure values, a regular self-check with your blood
pressure monitor is recommended. You can detect possible changes in your values
early and react appropriately.
If you are undergoing medical treatment to control your blood pressure, keep a
record of values along with time of day and date. Show these values to your
doctor. Never use the results of your measurements to independently alter
the drug doses prescribed by your doctor.
3
The following table is for classifying blood pressure values in adults in
accordance with the National Institutes of Health JNC7 (Data in mmHg):
Category Systolic Diastolic
Normal <120 and <80
Pre-Hypertension 120-139 or 80-89
Hypertension
Stage 1 Hypertension 140-159 or 90-99
Stage 2 Hypertension ≥160 or ≥100
(mmHg) (mmHg)
+ Further information
• If your values are mostly normal under resting conditions but exceptionally
high under conditions of physical or psychological stress, it is possible that you
are suffering from so-called “labile hypertension”. Consult your doctor.
• Correctly measured diastolic blood pressure values above 120mmHg
require immediate medical treatment.
*Not intended for use on children under 12 years of age.
2.3. What can be done if regular high or low values are obtained?
a) Consult your doctor.
b) Increased blood pressure values (various forms of hypertension) are associated
with considerable health risks over time. Arterial blood vessels in your body
are endangered due to constriction caused by deposits in the vessel walls
(Arteriosclerosis). A deficient supply of blood to important organs (heart, brain,
muscles) can result from arteriosclerosis. Furthermore, the heart will become
structurally damaged with increased blood pressure values.
c) There are many different causes of high blood pressure. We differentiate
between the common primary (essential) hypertension, and secondary
hypertension. The latter group can be ascribed to specific organic
malfunctions. Please consult your doctor for information about the possible
origins of your own increased blood pressure values.
d) There are measures which you can take to reduce and prevent high blood
pressure. These measures must be permanent lifestyle changes.
4
A) Eating habits
• Strive for a normal weight corresponding to your age. See your doctor for your
ideal weight.
• Avoid excessive consumption of common salt.
• Avoid fatty foods.
B) Previous illnesses
• Consistently follow all medical instructions for treating illnesses such as:
• Diabetes (Diabetes mellitus or sugar diabetes)
• Fat metabolism disorder
• Gout
C) Habits
• Give up smoking completely
• Drink only moderate amounts of alcohol
• Restrict your caffeine consumption (coffee, tea, chocolate)
D) Physical constitution
• After a preliminary medical examination, exercise regularly.
• Choose sports which require stamina and avoid those which require strength.
• Avoid reaching the limit of your performance.
• With previous illnesses and/or an age of over 40 years, please consult your
doctor before beginning your sporting activities. He/She will advise you
regarding the type and extent of types of sport that are possible for you.
3. Components of your blood pressure monitor
The illustration shows the blood pressure monitor consisting of:
a) Measuring unit
LCD-display
Cuff connection
5
START/STOP
button
b) Upper arm cuffs:
The cuff is for arm circumference 22–42 cm or 8.7” - 16.5” (included)
Please Note:
Do not force cuff connection into
the opening. If the cuff is too small,
or if you need a replacement cuff,
call toll free 1-855-776-0662 for
further information.
4. Operation of your blood pressure monitor
4.1. Inserting the batteries
After you have unpacked your device insert the batteries. The battery compartment
is located on the bottom of the device.
a) Remove cover on the bottom of the monitor.
b) Insert the batteries (4 x size AA 1.5 V), following the indicated polarity. (+ -)
c) If the low battery indicator appears in the display, the batteries are discharged
and the unit will not function.
d) If the batteries are inserted incorrectly, the display may function erratically or
not at all. Check battery polarity.
Attention!
• After the low battery indicator appears, the device won’t
function until the batteries have been replaced.
• Please use “AA” Long-Life or Alkaline 1.5 V Batteries.
Low Battery Indicator
• Do not use rechargeable batteries.
• If the blood pressure monitor is not used for long periods,
remove the batteries from the device.
Functional check: Hold on the START/STOP button down to test all the display
elements. When functioning correctly many icons will appear.
6
4.2. Tube connection
Insert the cuff tube into the opening
provided on the left side of the instrument,
as shown in the diagram.
5. Measurement Procedure
Please note: You should always be seated before and during measurement
5.1. Before the measurement:
• Avoid eating and smoking as well as all forms of exertion directly before
measurement. These factors influence the measurement result. Find time to
relax by sitting in an armchair in a quiet atmosphere for about ten minutes
before measurement.
• Remove any garment that fits closely to your upper arm.
• Always measure on the same arm (normally left).
• Always perform measurements at the same time of day, since the blood
pressure changes during the course of the day.
5.2. Common sources of error:
Note: Comparable blood pressure measurements always require the same
conditions! These are normally quiet conditions.
• Efforts by the patient to support the arm can increase blood pressure. Make
sure you are in a comfortable, relaxed position and do not activate any of the
muscles in the measurement arm during the measurement. Use a cushion for
support and rest your arm on a table.
• If the upper arm artery lies considerably lower or higher than the heart, a false
high or low blood pressure will be measured!
*A variation of 6” between the cuff and heart level can result in a
reading error of + or - 10mmHg.
• Cuffs that do not fit properly result in false measurement values. Selecting the
correct cuff is extremely important. The cuff size is dependent upon the
circumference or distance around your upper arm measured in the center. The
permissible range is printed on the cuff. If this is not suitable for your use,
please call 1-855-776-0662.
Note: Not all cuffs are compatible with all blood pressure monitors. For a list
of compatible cuffs for this unit, please call 1-855-776-0662.
• A loose cuff or a sideways protruding air-pocket causes false measurement values.
• Measurements should be done after a 5 minute rest to ensure accuracy.
• Consecutive blood pressure measurements should be performed after a 1 minute pause.
7
5.3. Fitting the cuff
a) Pass the end of the cuff through the flat metal ring so that a
loop is formed. The Velcro closer must be facing outwards.
(Ignore this step if the cuff has already been prepared.)
b) Place the cuff over the left upper arm so that the tube is
closer to your lower arm. Align the cuff artery mark (arrow)
over the arm artery than runs down the inner side of the arm.
Important!The red strip on the edge of the cuff (Artery
Mark) must lie over the artery which runs down the inner
side of the arm. TIP: Align red artery mark to pinky finger.
c) Lay the cuff on the arm as illustrated. Make certain that the
lower edge of the cuff lies approximately ½” to ¾” (1 to 2
cm) above the elbow and that the tube is closer to the inner
side of the arm.
d) Tighten the cuff by pulling the end and close the cuff by
affixing the velcro. Make sure that the cuff Index end falls
between the OK lines when the cuff is in position. If it
doesn’t, you are using the wrong cuff size.
e) There should be little free space between the arm and the
cuff. You should be able to fit 2 fingers between your arm
and the cuff. Clothing must not restrict the arm. Any piece of
clothing which does must be removed.
f) Lay your arm on a table (palm upward) so the cuff is at the same
height as the heart. Make sure that the tube is not kinked.
g) Remain seated quietly for five minutes before you begin
the measurement.
Comment:
If it is not possible to fit the cuff to the left arm, it can also
be placed on your right arm. However, all measurements
should be made using the same arm.
8.7” - 16.5”
Cuff on right arm
½
”-¾”
8
Loading...