ReliOn 7300REL User Manual

Automatic Blood Pressure Monitor

with Two Cuffs

Model 7300REL

INSTRUCTION MANUAL

ESPAÑOL

ENGLISH

Before Using the Monitor

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Operating the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Risk of Electrical Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Before Taking a Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Operating Instructions

Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Unit Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Display Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Irregular Heartbeat Symbol ( ) . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Movement Error Symbol ( ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

User ID Symbol (/) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Heartbeat Symbol/Hypertension Indicator ( ) . . . . . . . . . . . . . . . .12

Average Value Symbol ( ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Using the AC Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Setting the Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Setting the Medication Reminder Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Applying the Arm Cuff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Taking a Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Using the Memory Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Averaging Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

To Display the Measurement Values . . . . . . . . . . . . . . . . . . . . . . . . .33

To Delete All Values Stored in the Memory . . . . . . . . . . . . . . . . . . .35

Care and Maintenance

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Error Indicators and Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . .38

FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

TABLE OF CONTENTS

Thank you for purchasing the ReliOn®7300REL IntelliSense®Automatic Blood Pressure Monitor.

INTRODUCTION

Fill in for future reference.

DATE PURCHASED: __________________ SERIAL NUMBER: ____________________

• Staple your purchase receipt here

• Register your product on-line at

www.register-omron.com

Your new digital blood pressure monitor uses the oscillometric method of blood pressure measurement. This means the monitor detects your blood’s movement through your brachial artery and converts the movements into a digital reading. An oscillometric monitor does not need a stethoscope so the monitor is simple to use.

The 7300REL comes with the following components:

• Monitor • Standard Arm Cuff • Large Arm Cuff

• AC Adapter • 4 “AAA” Batteries • Storage Case

• Instruction Manual printed in English and Spanish

• Quick Start Guide • Log Book • Cuff Guide The 7300REL Automatic Blood Pressure Monitor is intended for home use.

Please read this instruction manual thoroughly before using the unit. Please keep for future reference. For specific information about your own blood pressure, CONSULT YOUR DOCTOR.

SAVE THESE INSTRUCTIONS

Before Using the Monitor

WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

SAFETY SYMBOLS USED IN THIS INSTRUCTION MANUAL

CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to the user or patient or damage to the equipment or other property.

OPERATING THE DEVICE

Contact your physician for specific information about your blood pressure. Self-diagnosis and treatment using measured results may be dangerous. Follow the instructions of your physician or licensed healthcare provider.

DO NOT adjust medication based on measurement results from this blood pressure monitor. Take medication as prescribed by your physician. Only a physician is qualified to diagnose and treat High Blood Pressure.

SAFETY INFORMATION

INTENDED USE

This product is designed to measure the blood pressure and pulse rate in adult patient population, following the instructions in this manual. It is mainly designed for general home use.

To assure the correct use of the product, basic safety measures should always be followed including the warnings and cautions listed in this instruction manual.

OPERATING THE DEVICE (continued)

The monitor is not intended to be a diagnostic device. If battery fluid should get in your eyes, immediately rinse with plenty

of clean water. Contact a physician immediately. Read all of the information in the instruction manual and any other

literature in the box before operating the unit. This device is intended for use in measuring blood pressure and pulse

rate in the adult population. Do not use this device on infants or persons who cannot express their intentions.

Operate the device only as intended. Do not use the device for any other purpose.

Dispose of the device, components and optional accessories according to applicable local regulations. Unlawful disposal may cause environmental pollution.

Do not use a cellular phone near the device. It may result in an operational failure.

Use only authorized parts and accessories. Parts and accessories not approved for use with the device may damage the unit.

Use only 1.5V alkaline batteries with this device. Do not use other types of batteries. This may damage the unit.

SAFETY INFORMATION

RISK OF ELECTRICALSHOCK

Do not plug or unplug the power cord into the electrical outlet with wet hands.

Do not overload power outlets. Plug the device into the appropriate voltage outlet.

CARE AND MAINTENANCE

Do not subject the monitor to strong shocks, such as dropping the unit on the floor.

Do not submerge the device or any of the components in water. Store the device and the components in a clean, safe location. Changes or modification not approved by the manufacturer will void

the user warranty. Do not disassemble or attempt to repair the unit or components.

SAFETY INFORMATION

BEFORE TAKING A MEASUREMENT

To ensure a reliable reading follow these recommendations:

1. Avoid eating, drinking alcohol, smoking, exercising, and bathing for 30 minutes before taking a measurement. Rest for at least 15 minutes before taking the measurement.

2. Stress raises blood pressure. Avoid taking measurements during stressful times.

3. Measurements should be taken in a quiet place.

4. Remove tight-fitting clothing from your arm.

5. Sit on a chair with your feet flat on the floor. Rest your arm on a table so that the cuff is at the same level as your heart.

6. Remain still and do not talk during the measurement.

7. Wait 2-3 minutes between measurements. The wait time allows the arteries to return to the condition prior to taking the blood pressure measurement. You may need to increase the wait time depending on your individual physiological characteristics.

8. Keep a record of your blood pressure and pulse readings for your physician. A single measurement may not provide an accurate indication of your true blood pressure. You need to take and record several readings over a period of time. Try to measure your blood pressure at about the same time each day for consistency.

KNOW YOUR UNIT

Main Unit:

Operating Instructions

Battery Compartment

Memory Button ( )

Display

User ID Selection

Switch ( )

Air Jack

Start/Stop Button

AC Adapter Jack

KNOW YOUR UNIT

Components:

Arm Cuffs

Air Tube

Air Plug (Connects to Air Jack)

Storage Case

Four “AAA” Batteries

Instruction Manual

Automatic Blood Pressure Monitor

with Two Cuffs

Model7300REL

INSTRUCTION MANUAL

ENGLISH

ESPAÑOL

Quick Start

Guide

Cuff Guide

Standard Arm Cuff

Air Tube

Air Plug (Connects to Air Jack)

Large Arm Cuff

AC Adapter

Housing

Cord

Log Book

UNIT DISPLAY

Movement Error Symbol

Low Battery Indicator

Deflation Symbol

Heartbeat Symbol/ Hypertension Indicator

Irregular Heartbeat Symbol

Average Value Symbol

Memory Symbol

Pulse Display

Medication Symbol

Date/Time Display

User ID Symbol (A or B)

Systolic Blood Pressure

Diastolic Blood Pressure

IRREGULAR HEARTBEAT SYMBOL ()

When the monitor detects an irregular rhythm two or more times during the measurement, the Irregular Heartbeat Symbol ( ) will appear on the display with the measurement values.

An irregular heartbeat rhythm is defined as a rhythm that varies by less than 25% from the average rhythm or 25% more than the average rhythm detected while the monitor is measuring the systolic and diastolic blood pressure.

If the Irregular Heartbeat Symbol ( ) displays with your measurement results, we recommend you consult your physician. Follow the directions of your doctor.

MOVEMENT ERROR SYMBOL ()

The Movement Error Symbol () is displayed if you move your body during the measurement. Please remove the arm cuff, and wait 2-3 minutes. Take another measurement.

USER ID SYMBOL ( / )

The User ID Symbol ( / ) indicates User A or User B as selected by the user to take a measurement or when using the memory function.

To change the User ID, press the User ID button on the monitor (Refer to “Taking a Measurement” section for more information).

NNormal H

ormal H

ear

eartbtb

eat

Irregular Heartbeat

Pulse

Blood

pressure

Pulse

Blood

pressure

Short Long

DISPLAY SYMBOLS

HEARTBEAT SYMBOL/HYPERTENSION INDICATOR ()

TAKING A MEASUREMENT

The Heartbeat Symbol ( ) flashes on the display during the measurement. The Heartbeat Symbol ( ) flashes at every heartbeat.

When the measurement is complete, the Heartbeat Symbol ( ) flashes on the display with your blood pressure and pulse rate if the reading is above 135 for the Systolic Blood Pressure value and/or 85 for the Diastolic Blood Pressure value.

USING THE MEMORY FUNCTION

The Heartbeat Symbol ( ) flashes when the blood pressure reading stored in the memory is above 135 for the Systolic Blood Pressure value and/or 85 for the Diastolic Blood Pressure value.

Omron Healthcare recommends you contact your physician if the Heartbeat Symbol ( ) flashes on the display with your measurement values.

AVERAGE VALUE SYMBOL ()

The Average Value Symbol () is displayed when you press the Memory button ( ). The most recent average reading appears on the display screen.

DISPLAY SYMBOLS

Internationally recognized guidelines for upper limit of normal home blood pressure readings are as follows:

Home Guideline for Upper Limit of Normal BP*

Systolic Blood Pressure 135 mmHg Diastolic Blood Pressure 85 mmHg This is a general guideline because blood pressure depends on

age and morbidity. A lower home blood pressure goal may be recommended for certain patients, including diabetic patients, pregnant women, and patients with renal failure.

WARNING

The monitor is not intended to be a diagnostic device.

WARNING

* Source: Hypertension. 2008; 52: 10-29

DISPLAY SYMBOLS

NOTES: • Use only the authorized AC Adapter that came with this

monitor.

• We recommend you install the batteries even if the AC Adapter is used. If no batteries are installed, you may need to reset the date and time if the AC Adapter is disconnected. The measurement results will not be deleted.

CAUTION

Use only authorized parts and accessories. Parts and accessories not approved for use with the device may damage the unit.

- DANGER -

TO REDUCE THE RISK OF

FIRE OR ELECTRIC SHOCK,

CAREFULLY FOLLOW THESE INSTRUCTIONS.

For connection to a power supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet.

The power unit (AC Adapter) is intended to be correctly oriented in a vertical or floor mount position.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

USING THE AC ADAPTER

TO DISCONNECT THE AC ADAPTER

① Hold and pull the Housing to remove the AC Adapter from the

electrical outlet. Do not remove by pulling the cord.

② Remove the AC Adapter plug from the monitor.

WARNING

Do not plug or unplug the power cord into the electrical outlet with wet hands.

WARNING

Do not overload power outlets. Plug the device into the appropriate voltage outlet.

TO CONNECT THE AC ADAPTER

① Insert the AC Adapter Plug into the

AC Adapter Jack on the right side of the monitor as illustrated.

② Plug the AC Adapter into a 120V

AC outlet (60 cycles).

Housing

Cord

USING THE AC ADAPTER

1. Press the ▼ indicator on the battery cover and slide the cover off in the direction of the arrow.

2. Install 4 “AAA” size batteries so the + (positive) and – (negative) polarities match the polarities of the battery compartment as indicated.

3. Replace the battery cover.

BATTERY INSTALLATION

Battery Cover

BATTERY REPLACEMENT

When the Low Battery Indicator appears on the display screen, turn the monitor off and remove all the batteries. Replace with four new batteries at the same time.

WARNING

If battery fluid should get in your eyes, immediately rinse with plenty of clean water. Contact a physician immediately.

NOTES: • Turn the unit off before replacing the batteries. If the

batteries are removed while the unit is still on, the date and time will be reset to that of the previous use. However, the measurement results are not deleted.

• When the batteries are replaced, you may need to reset the date and time. If “-:--” appears on the display screen, refer to “Setting the Date and Time”.

• The supplied batteries may have a shorter life.

CAUTION

Dispose of the device, components and optional accessories according to applicable local regulations. Unlawful disposal may cause environmental pollution.

BATTERY INSTALLATION

Low Battery Indicator

Set the monitor to the current date and time before taking a measurement for the first time. If the date and time are not set correctly, the measurement values stored in the memory and the average values may not be correct.

If the date and time are not set, “-:--” appears during or after measurement.

1. TO START THE SETTING

Press and hold the USER ID Selection Switch ( ) to adjust the date and time.

The year flashes on the display.

SETTING THE DATE AND TIME

2. SETTING THE YEAR

The year can be set between 2011 and 2040. When the display reaches 2040, it will return to

2011. Press the Memory button ( ) to advance by

one year increments.

Press the User ID Selection Switch ( ) to set the current year.

The month flashes on the display.

NOTE: Press and hold the Memory button ( ) to advance the date and

time values faster.

3. SETTING THE MONTH

Press the Memory button ( ) to advance by one month increments. Press the User ID Selection Switch ( )

to set the current month.

The day flashes on the display.

4. SETTING THE DAY

Press the Memory button ( ) to advance by one day increments. Press the USER ID Selection Switch

( ) to set the current day.

The hour flashes on the display.

5. SETTING THE HOUR

The time is set using AM or PM. Press the Memory button ( ) to advance by one hour increments. Press the USER ID Selection Switch

( ) to set the current hour.

The minute flashes on the display.

6. SETTING THE MINUTE

Press the Memory button ( ) to advance by one minute increments. Press the USER ID Selection Switch ( ) to set the minute setting.

7. TO TURN THE MONITOR OFF

Press the START/STOP button.

SETTING THE DATE AND TIME

RESETTING THE DATE AND TIME

To adjust the date or time after it has been setup when you first use the unit.

Start with the monitor in the off position.

1. Press and hold the USER ID Selection Switch ( ). The User ID Symbol ( or ) and the Medication Symbol ( ) will

appear on the display. Press the USER ID Selection Switch ( ) repeatedly until the year

flashes on the display.

2. Refer to “Setting the Date and Time”. The User ID Symbol ( or ) , the Medication Symbol ( ) No.1,

and the current setting (on or oFF) will appear on the display, after the minute has been set.

3. Press the START/STOP button to turn the monitor off. NOTE: If you need to change the Date and Time, always adjust the

Date and Time setting before taking the next measurement.

SETTING THE DATE AND TIME

The Medication Reminder Alarm can be set to sound twice a day to alert the user to take a medication. The Medication Reminder Alarm can be set for either AM or PM alerts. Only set the Medication Reminder Alarm after the date and time has been set. The Medication Reminder Alarm is set to off at the time of purchase.

NOTES: • Press the START/STOP button to stop the Medication

Reminder Alarm.

• The Medication Reminder Alarm will automatically stop sounding after one minute.

• The Medication Reminder Alarm will not sound while setting the date and time, setting the Medication Reminder Alarm, and taking a measurement.

• The Medication Reminder Alarm will not sound without setting the date and time.

1. TO START THE SETTING

Press and hold the USER ID Selection Switch ().

SETTING THE MEDICATION REMINDER ALARM

2. SELECTING THE USER ID

Press the Memory button ( ) to select your ID (A or B).

Press the USER ID Selection Switch ( ) to set the User ID.

The User ID Symbol ( or ) , the Medication Symbol ( ) No.1, and the oFF setting appear on the display.

3. SETTING ON OR OFF

Press the Memory button ( ) to select on. Press the USER ID Selection Switch ( ).

The hour flashes on the display. NOTES: • Press the Memory button ( ) to

alternate between on or oFF.

• If the Medication Reminder Alarm 1 is set to off, the Medication Reminder Alarm 2 setting display appears.

SETTING THE MEDICATION REMINDER ALARM

4. SETTING THE HOUR

The time is set using AM or PM. Press the Memory button ( ) to advance by increments of one hour. Press the USER ID Selection Switch ( )

to set the hour.

The minute flashes on the display.

5. SETTING THE MINUTE

Press the Memory button ( ) to advance by increments of one minute. Press the USER ID Selection Switch

( ) to set the minute. The Medication Symbol ( ) No.2 and the

oFF setting appears on the display.

SETTING THE MEDICATION REMINDER ALARM

6. SETTING THE MEDICATION REMINDER ALARM 2

Repeat steps from 2 to 4 to set the Medication Reminder Alarm 2.

NOTE: If the Medication Reminder Alarm 2 is

set to off, the year flashes on the display.

The year flashes on the display, after the Medication Reminder Alarm 2 has been set.

7. TO TURN THE MONITOR OFF

If the date and time are correct, press the START/STOP button to turn the monitor off.

To change the date and time refer to “Resetting the Date and Time” on page 21.

SETTING THE MEDICATION REMINDER ALARM

CAUTION

Read all of the information in the instruction manual and any other literature in the box before operating the unit.

CAUTION

This device is intended for use in measuring blood pressure and pulse rate in the adult population. Do not use this device on infants or persons who cannot express their intentions.

USE CUFF GUIDE TO CHOOSE THE RIGHT CUFF

There are two cuffs included in this unit, standard size and large size. Use the Cuff Guide to determine which size cuff is right for you, based on the circumference of your arm.

1. Make a loop with your Cuff Guide. Insert and pull the end with the arrow

through the slot.

APPLYING THE ARM CUFF

2. Fit the looped Cuff Guide on your upper arm.

3. The Cuff Guide will indicate which arm cuff should be used. Use the cuff with the same colored sticker.

APPLYING THE CUFFON THE LEFT ARM

1. Make sure the air plug is securely inserted in the main unit.

APPLYING THE ARM CUFF

Use the Standard Cuff

Orange

Purple

Use the Large Cuff

+ 61 hidden pages