RECTRON RL801, RL802, RL803, RL804, RL805 Datasheet

RECTRON		RL801
		THRU
SEMICONDUCTOR

TECHNICAL SPECIFICATION

RL806

GLASS PASSIVATED SILICON RECTIFIER

VOLTAGE RANGE 50 to 800 Volts CURRENT 8.0 Amperes

FEATURES

*Low Ieakage

*Low forward voltage drop

*High current capability

*High surge capability

*High reliability

MECHANICAL DATA

*Case: TO-220 molded plastic

*Epoxy: Device has UL flammability classification 94V-O

*Lead: MIL-STD-202E method 208C guaranteed

*Mounting position: Any

*Weight: 2.24 grams

*Polarity: As marked

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.

TO-220A

															.187 (4.7)
			.413			(10.5)				.153 (3.9)						.148 (3.8)
.108										.146 (3.7)
			.374			(9.5)
(2.75)																						.053 (1.3)
																							.047 (1.2)
										.270 (6.9)
											.230 (5.8)

																.610 (15.5)
.04MAX.																.583 (14.8)
	(1.0)
															.157
															(4.0)
.051																.583	(14.8)
			(1.3)													.531 (13.5)
.043 (1.1)
		.035 (0.9)
		.102 (2.6)													.022 (0.56)
															.014 (0.36)
.091 (2.3)
															.126
															(3.2)

Dimensions in inches and (millimeters)

MAXIMUM RATINGS (At TA = 25oC unless otherwise noted)

RATINGS		SYMBOL	RL801	RL802	RL803		RL804	RL805	RL806	UNITS
Maximum Recurrent Peak Reverse Voltage		VRRM	50	100	200		400	600	800	Volts
Maximum RMS Voltage		VRMS	35	70	140		280	420	560	Volts
Maximum DC Blocking Voltage		VDC	50	100	200		400	600	800	Volts
Maximum Average Forward Rectified Current		IO				8.0				Amps
TC = 100oC (Note 1)
Peak Forward Surge Current, 8.3 ms single half sine-wave		IFSM				200				Amps
superimposed on rated load (JEDEC method)
Typical Thermal Resistance		R θ J C				3.6				0C/ W
Typical Junction Capacitance (Note 2)		CJ				40				pF
Operating and Storage Temperature Range		TJ, TSTG			-65 to + 150					0 C
ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted)
CHARACTERISTICS		SYMBOL	RL801	RL802	RL803		RL804	RL805	RL8506	UNITS
Maximum Instantaneous Forward Voltage at 8.0A DC		VF				1.1				Volts
Maximum DC Reverse Current	@TC = 25oC	IR				10				uAmps
at Rated DC Blocking Voltage	@TC = 100oC					100
NOTES : 1.Case Temperature Measured at Metal Tab.										2001-4
2.Measured at 1 MHZ and applied reverse voltage of 4.0 volts.
3.Suffix “ R “ = Common Anode.