RECTRON P6FMBJ10, P6FMBJ100, P6FMBJ11, P6FMBJ130, P6FMBJ15 Datasheet

RECTRON		T V S
		P6FMBJ
SEMICONDUCTOR

TECHNICAL SPECIFICATION

SERIES

GPP TRANSIENT VOLTAGE SUPPRESSOR

600 WATT PEAK POWER 1.0 WATT STEADY STATE

FEATURES

*Plastic package has underwriters laboratory

*Glass passivated chip construction

*600 watt surage capability at 1ms

*Excellent clamping capability

* Low zener impedance

DO-214AA

* Fast response time

Ratings at 25 oC ambient temperature unless otherwise specified.

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 oC ambient temperature unless otherwise specified.

Dimensions in inches and (millimeters)

DEVICES FOR BIPOLAR APPLICATIONS

For Bidirectional use C or CA suffix for types P6FMBJ6.8 thru P6FMBJ400

Electrical characteristics apply in both direction

MAXIMUM RATINGS (At TA = 25oC unless otherwise noted)

	RATINGS	SYMBOL	VALUE	UNITS
	Peak Power Dissipation with a 10/1000uS (Note 1,2 Fig.1)	PPPM	Minimum 600	Watts
	Peak Pulse Durrent with a 10/1000uS waveform	IPPM	SEE TABLE 1	Amps
	( Note 1, Fig.3 )
	Steady State Power Dissipation at TL = 75oC ( Note 2 )	PM(AV)	5.0	Amps
	Peak Forward Surge Current, 8.3mS single half sine wave super-	IFSM	100	Amps
	imposed on rated load (Jedec Method)(Note 3,2) unidirectional only
	Maximum Instantaneous Forward Voltage at 50A for	VF	SEE NOTE 4	Volts
	unidirectional only ( Note 3,4 )
	Operating and Storage Temperature Range	TJ, TSTG	-55 to + 150	0 C

NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25oC per Fig.2.

2.Mounted on 0.2 X 0.2” ( 5.0 X 5.0mm ) copper pad to each terminal.

3.Measured on 8.3mS single half Sine-Wave or equivalent wave, duty cycle = 4 pulses per minute maximum.

4.VF = 3.5V on P6FMBJ6.8 thru P6FMB90 devices and VF = 5.0V on P6FMBJ100 thur P6FMBJ400 devices.

1998-8

Back

RECTRON