Raymarine CAM100 User Manual

Installation

r

North and South America

Raymarine Technical Support

1-800-539-5539
or, [phone]

Product Repair and Service

Raymarine Product Repair Center
21 Manchester Street,
Merrimack, NH
03054-4801
USA

Europe, Middle East, Africa
and Australasia

Raymarine Technical Support

[phone]

Product Repair and Service

Raymarine plc
Anchorage Park
Portsmouth
PO3 5TD
England

Help us to help you

To allow us to respond to your needs faster, please quote the Equipment
type, Model number and Serial number when requesting service

Complete product information and interactive help is available at:

www.raymarine.com

D8531_1

Technical Support

The adapter cable should be used to connect the display and the power supply to
the camera. The adapter cable connections are shown below

.

Video connecto

Red +12 V

D8537_1

Black - 0 V

If you do not have a breaker in the power circuit, an in-line 0.5 A quick blow fuse
should be fitted to the positive (red) lead of the cable.

Maintenance and Troubleshooting

Your Raymarine CAM 100 does not contain user-serviceable parts.
They should be serviced only by authorized Raymarine service
technicians at a Raymarine factory facility.

Routine Maintenance

Routine maintenance should be carried out on a regular basis:

• Examine all cables for signs of damage such as chafing, cuts or nicks.

• Check that all cables are securely connected.

• Spray the camera and lens with fresh water and wipe with a soft lint-free
cloth to remove debris or salt deposits.

Technical specification

Format PAL 752 x 582 pixels

Imager 1/3 Sony Super HAD CCD (Super Hi resolution)

Horizontal resolution 550 TVL

Scanning system PAL 625 lines

Video output Composite 75 Ohms

Infra red 14 IR LEDs

LED spectrum 30 degrees for 15m

Minimum illumination 0.1 Lux at F2 - no IR, 0 Lux - with IR

Waterproof IPX6 and CFR46

Power connection 12 V tinned leads

Video connections Male BNC

Operating temperatures

Power consumption 130 mA - day, 280 mA - night, IR o n @12 V DC

NTSC 768 x 494 pix els

NTSC 525 lines 2:1 interlaced

o

C to +55o C (-14o F to 130o F)

-10

Technical support

CAM 100

Troubleshooting

Problem Solution

Camera does not function 1. Make sure that the cable is so und and

EMC conformance

All Raymarine equipment and accessories are designed to the best industry
standards for use in the recreational marine environment. The design and
manufacture of Raymarine equipment and accessories conforms to the
appropriate Electromagnetic Compatibility (EMC) standards, but correct
installation is required to ensure that performance is not compromis

that all connections are tight and free

from corrosion.

2. Check system fuses.

3. Check that the display is set up
correctly to receive the ima ges.
Refer to the relevant display
handbook for full de tails.

ed.

User Guide

A

B

C

D

E

F

G

D8533_1

Drill

Drill bit

Phillips
screwdriver

D8534_1

Installation

Introduction

Safety notices

CAUTION: Power supply
The Raymarine CAM 100 CCTV camera is suitable for
use on 12 V DC power supply only.

CAUTION: Power supply
A 0.5A quick-blow fuse should be fitted to the positive
(red) lead of the camera.

CAUTI ON: Cam era len s
The camera lens cover is made of glass. Care should be
taken to avoid personal injury if broken.

The Raymarine CAM 100 CCTV camera is a high
quality 550 TVL horizontal resolution color
camera available in two models:

•E03006 - PAL format.

•E03007 - NTSC format.
The camera has 14 infra-red light emitting

diodes (LEDs) offering an extraordinary clear
view in pitch black darkness.The unit is

D8532_1

waterproof to CFR46.

What’s in the box?

A. CCTV camera E. Pan he ad s cre ws x 3

B. Suncover F. Hex key

C. Adjustable mounting bracket G. Adapter cable

D. Lens cover H. Nylon washers (not illustrated)

What tools are required?

Cable runs

You need to consider the following points before installing the system cables:

• You need to connect the camera to the display unit and power supply.

• All cables should be adequately clamped and protected from physical damage
and exposure to heat - avoid running cables through bilges or doorways, or
close to moving or hot objects.

• Acute bends must be avoided.

• Where a cable passes through an exposed bulkhead or deck head, a watertight
gland or swan neck tube should be used.

• CCTV camera cables cannot be cut and rejoined.

Installation

1.Decide the camera position to obtain the best
coverage of the selected area.

2.Drill holes for cable runs.

3.Thread the cable into position through the
mount .

4.Fix the adjustable mounting bracket into
position using nylon washers to protect
paintwork under the screw heads.

D8535_1

5.Attach the camera to the mounting bracket
and lock in position using the locknut.

CAUTION: Installation
This product IS NOT suitable for installation
underwater.

This product contains no user serviceable parts.

Waste Electrical and Electronic (WEEE) Directive

The WEEE Directive requires the recycling of waste electrical and
electronic equipment. Whilst the WEEE Directive does not apply to some
of Raymarine’s products, we support its requirements as part of our
environmental policy and we ask you to be aware of how you should

dispose of this product. The crossed out wheelie bin symbol found on
our products signifies that it should not be disposed of in general waste or landfill.
Please contact your local dealer, national distributor or Raymarine Technical Services
for information on product disposal.

What accessories are available?

To enable you to complete the cabling to install your camera the following accessories
are available:

• E06017 - 5m extension cable.

• E06018 - 15 m extension cable.
You can join these cables in any combination to achieve the required cable length, but

for optimum performance Raymarine recommend that the total cable length does not
exceed 50 m.

D8536_1

Cable connections

Female

Male

The extension cables from the camera to the display unit are
joined using the male/female twist connectors.

The head of the bracket can be adjusted

vertically through 90
through 360

o

o

and can be rotated

.

6.Connect the camera to the display and fine
tune its orientation to obtain the best picture.

7.Lock the camera into the correct position using
the allen key provided.

8.Clip on the suncover.