Rand McNally RVND 7735 LM Quick Start Guide
RVND
7735 LM
Quick Start Guide
RVND™ 7735 LM
Important Information About Your GPS
Rand McNally Dock: Keep your device up to date by downloading the Rand McNally Dock for your home
computer at www.randmcnally.com/dock and connecting your device with the USB cable provided.
Wi-Fi®: Some features of this device require wireless connectivity, which requires a supporting feature and
data plan from your wireless service provider. As the user, you are responsible for all data charges. Please
contact your wireless service provider to make sure you do not exceed the limits of your data plan.
Power Button: Press and hold the orange power button to turn the device on or off. The power button can
also be used for quick access to certain features while the device is running. See Preferences > General >
Quick Power Press for options. A red light indicates the battery is charging; a green light indicates the
battery is fully charged.
Reset: Use the reset button on the back of the device to restart. This will cancel the current route, but
preferences, address book, and other personal data will be saved.
Learn More: Access the Tutorial under Preferences > General on your device for more information,
or visit www.randmcnally.com/support to download the user manual.
WARNING: This product contains chemicals known to the State of California to cause cancer and/or other harm.
1
Install the Mount
Note: Follow all local regulations governing the placement of the mount.
1. Select an area with a line of sight to the sky and
GPS satellites to ensure reliable GPS information.
2. Clean and dry the mounting area.
3. Remove the suction cup protective fi lm.
4. Adjust the angle of the mount using the thumbscrew.
5. Pull the suction cup lever up to release suction.
6. Plug the power cord into the device and the
vehicle’s 12-volt power source.
7. Slide the device onto the mount.
8. Place and hold the mount suction cup against the mounting surface.
9. Press the suction cup lever down until it snaps into place.
10. Adjust the device so that it can be easily seen and does not block the driver’s line of sight.
2
Main Menu
1
Enter RV information and access RV-specifi c
7
tools.
2
Show location on the map and view
navigation instructions.
3
Choose a destination.
4
Select general, route, and map preferences.
5
Mute/unmute the speaker.
6
Adjust speaker volume.
7
Battery status indicator.
1 2 3
4 5 6
Note: You can select different color schemes in
Preferences > General > Skin Style. The following screen images appear in the “Ice” style. Some screens
may appear different, based on model number.
Note: From other screens, tap the Main Menu icon in the bottom right corner to return to the Main Menu.
3
Enter RV Information and Set Warnings
1. Tap RV Tools > RV Info or Warnings.
2. Tap and to view options.
3. Tap the option button to be changed.
4. Enter new settings.
5. Tap to save changes.
Set Routing and Device Options
1. Tap Preferences.
2. Tap the General, Route or Map tab.
3. Tap
4. Tap the option button to be changed.
5. Enter new settings.
6. Tap to save changes.
4
and to view options.
On the
left, tap
on an
option
On the
left, tap
on an
option
On the
right,
enter
settings
for the
option
On the
right,
enter
settings
for the
option
Destination
1
Route to a new location. (See page 6.)
2
Return to a previously entered address.
3
Access the Address Book.
4
Plan a multi-stop trip.
5
Route to a point of interest. (See page 10.)
6
Run an Internet search for a location by name or
keyword. (See page 11.)
(Note: This feature requires a Wi-Fi connection.)
7
View trip content from Rand McNally.
8
Tap the button on this screen and others
for help.
1 2 3
4
5
6
8
7
5
Route to a New Location
1. Tap Choose Destination > New Location.
2. Tap Address.
3. Enter the name of the city. (Note: As you type, the keyboard
displays only the next possible letter.)
4. Prompts appear in the top bar. Tap the city to select. Or, tap
List to view cities beginning with the letter(s) you entered.
5. Enter the street name. (Note: If the letters you need do not
appear, tap Expand Search.)
6. Enter the house number. (Note: To enter the house number
before the street, tap the house number button in the
See Confirm Destination Window (page 7).
Tips
6
previous step.)
• You can also route to a new location by City Center,
Intersection, or Latitude/Longitude, or choose
Address > Zip Code Search.
• View recent destinations by tapping Choose Destination > History.
View recent cities by tapping Choose Destination > New Location > Address > History.
• View saved locations by tapping Choose Destination > Address Book.
Loading...