USER MANUAL
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
Caution!
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC SAR exposure limits set forth for an uncontrolled
environment.
SAR compliance for using the equipment in close proximity to the human body
has been evaluated at 0mm.
This equipment must not be co-located or operating in conjunction with any other
antenna or transmitter.
End-users and installers must be provided with antenna installation instructions
and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
This equipment should be installed and operated with a minimum distance of
0mm between the radiator and your body.
Cet équipement devrait être installé et actionné avec une distance minimum de
0mm entre le radiateur et votre corps.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps
qu'aucune autre antenne ou émetteur.
The device for operation in the band 5150–5250 MHz is only for indoor use
to reduce the potential for harmful interference to co-channel mobile satellite
systems.
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés
uniquement pour une utilisation à l’intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes
canaux.
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
OverDryve™ Pro II User Manual
i
About GPS
The Global Positioning System (GPS) is a constellation of satellites that
a GPS receiver uses to calculate geographical positions. To determine
a position, data from at least three satellites is required. To determine
elevation, the data from four or more satellites is required. Accuracy of
the positioning varies from 10 feet to several hundred feet, depending
on vehicle placement and the surrounding environment.
Geographical terrain (such as mountains), man-made structures (such
as highway overpasses, bridges, and tall buildings), as well as weather
can interfere with the GPS signal. For best GPS reception, position the
device and mount with a clear line of sight to the sky. Some vehicles
may have a limited view of the sky due to metal sun shields or a
metallized windshield coating.
Map data includes the geographical coordinates for address locations
and points of interest (POIs). With GPS reception, your device calculates
a route to your selected location.
Customer Support
Call toll-free: 877-446-4863
OverDryve™ Pro II User Manual
E-mail: support@randmcnally.com
Questions about using OverDryve
™
Our team is ready to help.
Pro II?
ii
Table of Contents
1. Your OverDryve™ Pro II .....................................................................................1
Caution: Important Safety Information ..............................................1
Box Contents ....................................................................................2
Install the Mount ...............................................................................2
Using the Android Home Screen ........................................................4
2. Getting Started ............................................................................. 5
Setup ................................................................................................5
Connect to the Internet ...............................................................6
Register Your Device .................................................................... 7
Connect to Bluetooth .................................................................. 8
Connect to Your Truck Stereo ......................................................9
Device Settings ................................................................................ 11
3. Messaging ................................................................................... 16
4. Phone ........................................................................................... 18
5. Rand Navigation 2.0 ................................................................... 19
Home Screen .................................................................................. 19
Preferences .................................................................................... 20
Destination Search ........................................................................... 25
Single-line Search ............................................................................ 26
Guided Search ............................................................................... 27
Using Guided Search ....................................................................... 28
New Location .................................................................................. 29
My Trips ........................................................................................... 30
Multi-Stop Trips ............................................................................... 31
Trails ................................................................................................ 32
History ............................................................................................. 33
Address Book .................................................................................. 34
Address Book: Contacts ................................................................... 35
Address Book: Groups ..................................................................... 36
POIs ................................................................................................. 37
Filter POIs ........................................................................................ 38
POIs ................................................................................................. 39
Home/Work ..................................................................................... 40
History & Bookmarks ...................................................................... 41
Route Map Window ....................................................................... 42
Exits ............................................................................................... 43
Route Options ............................................................................... 44
Route Overview ............................................................................. 45
Detour/Avoid ................................................................................. 46
Weather......................................................................................... 48
Traffic ............................................................................................ 49
Fuel ............................................................................................... 51
Virtual Dashboard. ......................................................................... 52
Fuel Logs ....................................................................................... 53
Junction View ................................................................................ 54
Turn View ...................................................................................... 54
Truck Tools ..................................................................................... 55
6. TripMaker
®
.................................................................................... 56
7. DriverConnect ............................................................................. 57
8. Road Atlas.................................................................................... 58
9. Cameras ....................................................................................... 59
Dash Cam .......................................................................................60
Video Files ................................................................................. 61
OverDryve™ Pro II User Manual
iii
10. Entertainment ............................................................................. 62
Bluetooth Player .............................................................................. 62
Phone Playback .........................................................................62
FM Transmitter ................................................................................ 63
SiriusXM Radio ................................................................................ 64
SiriusXM Functions .......................................................................... 65
11. Troubleshooting .......................................................................... 71
Restarting the Device ......................................................................71
12. More Information ....................................................................... 72
Table of Contents
OverDryve™ Pro II User Manual
iv
Caution: Important Safety Information
1. Your OverDryve™ Pro II
Navigation
• Use this device at your own risk.
• Attend to this device only when it is safe to do so.
• Traffic laws and regulations always have priority over any instructions
from the navigation system.
NOTE: If you do not understand the spoken instructions or are unsure of
what to do, refer to the navigation map on your device.
Installation
• Make sure that the mount is securely mounted and properly
adjusted before each trip.
• Make sure that the mount does not impair the driver’s visibility.
• Do not attach the mount within the airbag deployment zone.
• Install the mount in a manner that minimizes risk in the event of an
accident.
• After installation, check all safety-related equipment to ensure that
it operates without interference from the device, its cables,
or any other accessories.
Device
• Do not use sharp-edged objects on the device touch screen.
• The device is not waterproof and is not protected against
water damage.
• Protect the device from extreme temperatures. Operating
temperature for the device is between 32 degrees F and
120 degrees F.
• Do not open the device casing.
• Do not attempt to replace the battery. Contact Rand McNally
Customer Support with questions about the battery.
• Always follow local regulations when disposing of this device.
NOTE: Make sure that there are no kinks in the cable and that it will
not be damaged by any sharp objects.
NOTE: Use only a moist cloth to clean the device.
NOTE: Do not pull the cable to unplug the unit.
• Connect the wall charger to a 120V or 240V outlet only.
• Connect the vehicle charger to a 12V outlet only.
OverDryve™ Pro II User Manual
1
1. Your OverDryve™ Pro II
Box Contents
1
OverDryve
2
Smart mount
3
Bracket with suction cup
4
FM transmitter antenna
5
Anti-glare screen protector
6
SiriusXM antenna
7
Dash mount disc
8
AUX cable
9
Vehicle charger
10
USB wall charger
™
Pro II tablet
1
Install the Mount
Note: Follow all local regulations governing the placement of the mount.
1. Select an area with a line of sight to the sky and GPS satellites.
2. Clean and dry the mounting area.
3. Remove the suction cup protective film.
4. Attach the two pieces of the mount together and lock into place.
5. Adjust the angle of the mount.
6. Pull the suction cup lever up to release suction.
7. Plug the power cord into the mount and the vehicle’s 12-volt
power source.
8. Optional: To use your vehicle’s speakers, connect an AUX cable from
the Smart Mount AUX out to your vehicle’s AUX in port.
9. Optional: To use the SiriusXM satellite radio features, see the
instructions in Section 10 (Entertainment).
2
3
10. Place and hold the mount suction cup against the
mounting surface.
11. Press the suction cup lever down until it snaps into place.
10
OverDryve™ Pro II User Manual
12. Snap the tablet onto the mount.
13. Adjust the tablet so that it can be easily seen and does not
block the driver’s line of sight.
5
4
7
6
8
9
2
Power
Home
Volume
Down Up
Micro USB
(power)
Micro HDMI
(video out)
AUX out
FM Transmitter
Antenna
SiriusXM
Antenna
1. Your OverDryve™ Pro II
SiriusXM® smart mount
AUX out
USB
DC in
(power)
OverDryve™ Pro II User Manual
Micro SD card
Reset
3
1. Your OverDryve™ Pro II
2
4
1
3
5
6
7
8
9
Using the Android Home Screen
After you turn on your device, the home screen will display.
At the top of the home screen is the status bar. It displays important
information like your Wi-Fi connection, remaining battery life, time, etc.
The status bar will display at the top of almost every screen.
Swipe down at the top of the status bar and your Notifications panel will
display. The tablet notifies you when something needs your attention, such
as an e-mail, text message, or device update.
Tap or swipe down in the Notifications panel and a Quick Settings panel
will display. The Quick Settings panel contains often used features such
as Wi-Fi connection, Bluetooth, and location services (GPS). It also displays
an Android Settings icon in the top right corner. Tap the Android
Settings icon to access a full menu of device settings.
1
Location enabled indicator
13
OverDryve™ Pro II User Manual
12
11
10
2
Bluetooth indicator
3
Wi-Fi indicator
4
Battery power indicator
5
Current time
6
Guided search
7
Settings
8
View installed apps
9
Swipe right to view additional home screens
10
View open apps
11
Home
12
Back
13
Voice Assistant
4
2. Getting Started
Setup
Connect to the Internet
Enable the Wi-Fi hotspot on your smartphone or other in-vehicle device
and then connect OverDryve
complete setup.
Register your device
Register with Rand McNally for updates and support.
Connect to Bluetooth
Enable Bluetooth on your smartphone and pair OverDryve™ Pro II to enable
hands-free calling and texting, music streaming, and voice assistance.
Connect to your truck stereo system
You can listen to audio through any of the following four methods:
™
Pro II or connect to your home Wi-Fi to
OverDryve™ Pro II User Manual
1. Plug an AUX cable into the Smart Mount and the AUX port in
your truck.
Note: Do not plug the AUX cable into the audio out port on
™
OverDryve
Pro II.
2. Use the Smart Mount speaker.
3. Use the FM Transmitter. To use the FM transmitter, attach the antenna
™
to the Smart Mount. On OverDryve
Pro II, tap Entertainment >
FM Transmitter and follow the instructions.
4. Add an AUX input to your existing truck.
Note: If your device has not been able to detect your location, you may be
asked to set your time zone.
5
Connect to the Internet
2. Getting Started
First activate the Wi-Fi hotspot on your phone or in your truck. From the
™
OverDryve
Pro II setup screen, tap Get Started to begin the
setup process. Tap Find my hotspot.
Select a Wi-Fi network and connect.
OverDryve™ Pro II User Manual
A message will display that states you are connected. Tap Next.
6
2. Getting Started
Register Your Device
Register your device to receive important device updates and support.
Tap Next to proceed to the next step.
OverDryve™ Pro II User Manual
7
2. Getting Started
Connect to Bluetooth
Connect to your phone via Bluetooth to allow OverDryve™ Pro II to call and
text hands-free and to stream music from your phone to your truck’s
stereo system.
First enable Bluetooth on your phone.
™
From OverDryve
1. Tap Connect.
Pro II:
2. Tap Pair New Device and choose smart phone. A Bluetooth pairing
™
request will display on your OverDryve
Pro II.
3. Tap Pair. If successful, the screen will display a connected message.
™
If the OverDryve
Pro II failed to connect, verify that your phone is in
range and Bluetooth is enabled.
Help for Connecting to Bluetooth
If you are having issues connecting OverDryve™ Pro II to your smartphone
via Bluetooth, these steps can help:
™
4. Make sure that your OverDryve
proximity to each other, preferably within five feet.
5. Check that both devices do not have a low battery. Some devices will
disable Bluetooth to conserve power when the battery gets low.
6. Power the devices off and then back on.
7. Turn off any devices that may be interfering with the Bluetooth
connection. For example, if you usually pair your OverDryve
with a different phone, turn off that phone.
Pro II and smartphone are in close
™
Pro II
OverDryve™ Pro II User Manual
8
2. Getting Started
Connect to Your Truck Stereo
To listen to audio through your truck stereo, the tablet must be in truck
mode. To put the tablet in truck mode, place it on the Smart Mount and
plug the mount into a power source using the vehicle charger.
The optimal way to connect to your truck stereo is with the provided
™
AUX cord. You can also connect wirelessly via OverDryve
Pro II’s
FM transmitter.
To connect with the AUX cable:
1. Tap Connect via AUX.
™
2. Plug the right-angle end of the AUX cable into the OverDryve
Pro II
Smart Mount.
Note: Do not plug the AUX cable into the audio out port on
™
OverDryve
Pro II.
3. Plug the other end into your truck’s AUX jack.
4. Set your truck’s audio source to AUX.
To use the FM transmitter:
1. Attach the FM antenna to the Smart Mount.
2. Unplug the AUX cable if it is plugged in.
3. Tap the settings icon located in the top right corner of the
™
OverDryve
4. Tap OverDryve
Pro II screen.
™
Pro II Setup > Audio > Connect via radio.
OverDryve™ Pro II User Manual
9
Connect to Your Truck Stereo (Continued)
2. Getting Started
Using the OverDryve
™
Pro II Speakers
Your tablet has its own speaker, and there’s another powerful speaker
™
in the Smart Mount. You can use the OverDryve
Pro II speakers instead
of connecting to your truck stereo. If you want to connect to the truck
stereo later, tap the Settings icon in the top right corner of the screen,
™
then OverDryve
Pro II Setup > Audio.
OverDryve™ Pro II User Manual
10
2. Getting Started
Device Settings
Swipe down from the top of the screen to view the Quick Settings panel
and adjust the following frequently used features:
• Battery Power
• Settings Icon – Access a full menu of all settings.
• Brightness – Changes the screen brightness.
• Wi-Fi – Shows available networks.
• Bluetooth
• Airplane Mode – Turns off Wi-Fi and Bluetooth.
• Auto Rotate – Controls whether the screen rotates
when you rotate the tablet.
• Location – Turn on/off location services (GPS).
• Cast screen – Project your screen onto a compatible device.
OverDryve™ Pro II User Manual
11
2. Getting Started
From the Quick Settings panel, tap the Settings icon to access a full
menu of settings for your device.
• Network & Internet – View and connect to available Wi-Fi networks.
• Connected devices – View Bluetooth settings, cast and printing
services
• Apps & notifications – View apps. Swipe left to view: downloaded,
running, all.
• Battery – View time spent on battery and battery power used
by different apps.
• Display – Set brightness, wallpaper, appearance, etc.
• Sound – Set volumes for different features and enable/disable sounds.
OverDryve™ Pro II User Manual
• Storage – View how much storage is available on your
™
OverDryve
Pro II.
• Security & location – Set screen security lock and location accuracy.
• Users & accounts – Add accounts and sync user data.
• Accessibility – Manage font size, display size settings.
• System – View software version and reset device to factory settings.
12
2. Getting Started
Connected devices
• Bluetooth – Manage bluetooth connection for paired devices.
• Cast – Cast screen content.
• Printing – Manage connected printers.
Display
OverDryve™ Pro II User Manual
• Brightness level – Set brightness level.
• Adaptive brightness – Optimize brightness for available light
on or off.
• Wallpaper – Choose wallpaper for device.
• Sleep – Set sleep timer for device inactivity.
• Advanced – Manage screen rotation, font size, display size,
screen saver, HDMI settings.
13
2. Getting Started
System
• Languages & input – Set language and keyboard layout.
• Gestures – Set gesture key shortcuts.
• Date & time – Set date, time, time zone, and date/time format.
• Backup – Backup data to account.
• Reset options – Factory reset device.
• About tablet – Status of battery, network and serial number.
Model number, software and hardware version.
Accessibility
OverDryve™ Pro II User Manual
Screen readers
Display
• Font size – Set font size.
• Display size – Set display size.
• Magnification – Maginification on/off.
To zoom, tap anywhere on the screen. Drag 2 or more fingers to scroll.
Pinch 2 or more fingers to adjust zoom.
14
2. Getting Started
Security & location
Device security
• Screen lock – Choose screen lock security type. None, swipe, pattern,
pin, password.
Privacy
• Location – Location mode accuracy.
• Show passwords – Display characters as you type passwords.
Network & Internet / Tethering
OverDryve™ Pro II User Manual
• USB tethering – Share device’s internet connection via USB.
• Bluetooth tethering – Share device’s internet connection via
bluetooth.
15
3. Messaging
Pair OverDryve™ Pro II with your iPhone or Android phone via Bluetooth
™
to send and receive texts hands-free. The OverDryve
Assistant integrates with your phone’s voice assistant. OverDryve
Pro II Voice
™
Pro II
automatically syncs your text messages so you can see new messages and
browse through old ones without reaching for your phone.
Note: If you have an iPhone, make sure your phone is not open to the
messaging screen. When the messaging screen is open, the iPhone
automatically marks the message as “read”. The iPhone won’t transmit “read”
™
messages over Bluetooth, so OverDryve
To send and receive texts hands-free, tap the Voice Assistant
Pro II will not be able to access them.
which will ask who you would like to text. Speak the name of any of your
contacts. The Voice Assistant will prompt you for your message and then
ask you if you would like to send it. The Voice Assistant can also read back
text messages that you receive.
Set your favorite contacts by clicking the star icon next to their names.
Easily access them in the favorites tab.
If you want to send a text without using the Voice Assistant:
1. Tap Messaging.
OverDryve™ Pro II User Manual
2. Enter the phone number or select a name from your Contacts.
3. Tap the yellow messaging icon.
4. Tap Write a message in the lower left corner of the screen.
5. Write the message and tap the blue arrow to send it.
16
3. Messaging
To enable text message notifications:
1. From Messaging, tap the Settings icon in the top left corner of the
screen.
2. Tap Settings.
3. If Enable Messaging Notifications is checked, notifications are already
enabled. If not, tap to turn on the feature. The status will show “Enabled”.
™
To control what text message information displays on OverDryve
1. From Messaging, tap the Settings icon in the top left corner of the
screen.
2. Tap Settings.
3. If Show Message Content is checked, tap to uncheck. The status will
change to “Hide Content”.
Pro II:
OverDryve™ Pro II User Manual
17
4. Phone
Pair OverDryve™ Pro II with your iPhone or Android phone via Bluetooth
™
to make calls hands-free. OverDryve
Pro II automatically downloads your
contacts and call history when you get in the truck.
Set your favorite contacts by clicking the star icon next to their names.
Easily access them in the favorites tab.
To set the ringtone or notification ringtone:
1. From Phone, tap the Settings icon in the top left corner of the screen.
2. Tap Settings.
3. Tap Ringtone or Notification Ringtone and choose your selection.
OverDryve™ Pro II User Manual
18
5. Rand Navigation 2.0
Home Screen
3
2
1
Where to?
1
4
5
6
8
7
9
10 11
Tap to enter a destination.
2
Battery
Displays battery power status and charging indicator.
3
Map View Mode
Tap to switch the map view: 3D map, North up, or Heading up.
4
Wi-Fi Connected Services
Tap to enable fuel prices, weather and traffic on the map.
5
Zoom
Tap + or - to zoom in or out on the map.
6
Return to current location
Tap to view your current location on the map.
OverDryve™ Pro II User Manual
7
Virtual Dashboard
Tap to view a variety of information concerning your current trip.
8
Street/Intersection/Location
Tap to toggle between the current street name, the upcoming
intersection, or your current location.
9
Local Time/Elevation
Tap to toggle between Local time and Elevation.
10
Settings
Tap to access settings, such as: General, Truck Info, Route, Map, and
Warnings settings.
11
Full Screen
Tap to change the view to full screen.
19
Settings
1. Tap Up or Down to view options.
2. Tap the option to be set.
3. Enter the new information.
4. Tap Back
to save changes.
Preferences Page
General
Language ...............................................22
Unit..... ...................................................22
Clock .....................................................22
Yard time zone.......................................22
Vehicle type ...........................................22
Load prompt .........................................22
Mileage log ............................................22
Custom POIs ..........................................22
Touch sound ..........................................22
System settings ......................................22
GPS repair ..............................................22
System update .......................................22
Tutorial ...................................................22
Contact & about ....................................22
Truck Info
Hazmat type ..........................................23
Weight - empty......................................23
Weight - loaded .....................................23
Height ....................................................23
Width ....................................................23
Trailers ....................................................23
Number of axles ....................................23
5. Rand Navigation 2.0
Preferences Page Preferences Page
Route
Traffic .....................................................23
Recalculation ........................................23
Preferred route ......................................23
ETA adjustment .....................................23
Turn announcements ............................23
Junction views ......................................23
Route avoids .........................................23
Permanent avoids ..................................23
Map
Day/night mode .....................................24
Route color ...........................................24
Map view mode ....................................24
Map auto zoom .....................................24
Lane guidance .......................................24
POI icons ................................................24
Truck POI icons ......................................24
Address book icons ................................24
Truck icon ..............................................24
Bus icon .................................................24
Car/Light truck icon .............................. 24
Warnings
Warning type .........................................25
Auto dismiss ..........................................25
Curve .....................................................25
Hill .........................................................25
Engine brake .........................................25
Narrow road .........................................25
Construction area .................................25
Speed limit .............................................25
Speed limit change ...............................25
Weigh station ........................................25
State/Province border .............................25
Timezone change ..................................25
Toll booth ...............................................25
Maintenance..........................................25
OverDryve™ Pro II User Manual
20
5. Rand Navigation 2.0
General Options
Language English
Español
Français
Units U.S. Standard
Metric
Automatic
Clock 12-hour format
24-hour format
be available in car mode.
Yard Time Zone Hawaii-Aleutian Time
Alaska Time
Pacific Time
Arizona
Mountain Time
Central Time
Eastern Time
Indiana (East)
Atlantic (Canada) Time
Newfoundland Time
Vehicle Type Truck
Bus
Car/Light truck
For the screen and spoken instructions.
Note: Some tools and settings may not
Controls how routes are calculated.
General Options
Load Prompt Enabled
Always loaded
Specify whether mileage should be
calculated with the truck empty, always
loaded, or whether to display a prompt
for each route. When set to Enabled,
each time you tap Start a New Route,
a window displays asking if the truck is
loaded or empty.
Mileage Log Truck & Bus
Car only
Truck & Car
Disabled
Custom POIs Tap to display the list of custom Points of
Interest
Touch Sound On/Off slider
System Settings Tap to display Android System settings
GPS Repair Tap to update missing, broken, and/or
out-of-date files in the GPS. An internet
connection is required.
System Update Tap to perform system update
Tutorial View on-device tutorial
OverDryve™ Pro II User Manual
Contact & About Tap to show version information
and copyrights.
21
5. Rand Navigation 2.0
Truck Info Options
Hazmat Type None
Explosives
Gases
Flammable Liquids
Flammable Solids
Oxidizers
Poison
Radioactive
Corrosives
PIH
Other
Weight (Empty) Click the pencil icon to enter a numeric
value.
Weight (Loaded) Click the pencil icon to enter a numeric
value.
See Load Prompt in General
preferences.
Height Click the pencil icon, and use the dials
to select your vehicle’s height.
Route Options
Traffic On/Off slider (requires Wi-Fi connection)
Recalculation Auto
Manual
Preferred Route Fastest route
Shortest route
ETA Adjustment Increase ETA more
Increase ETA some
ETA ok
Decrease ETA some
Decrease ETA more
Set adjustments to your ETA due to
weather or traffic conditions. You can
add (increase) time to make the trip
take longer or subtract (decrease) time
to make the trip take less time.
Turn Announcements Set three distances at which you want
to be warned about an upcoming turn.
The first announcement will be the
farthest from the turn and the third the
closest to it.
Width Click the pencil icon, and use the dials
to select your vehicle’s width.
Trailers Straight
48'
53'
Double
Triple
Number of Axles Use the dial to select the number of
axles.
OverDryve™ Pro II User Manual
Junction Views Set the distance before the maneuver
at which the highway junction view
screen appears.
Route Avoids Select/de-select from the list of options:
Tollways, Freeways, Ferries, Tunnels, Small
Roads, U-Turns, Cross-country borders, Dirt
roads
Permanent Avoids Tap to manage your list of areas and
roads to permanently avoid.
22
5. Rand Navigation 2.0
Map OptionsMap Options
Day/Night Mode Automatic
Day
Night
Route Color Tap the color to select.
Map View Mode Heading up
North up
3D view
Map Auto Zoom On/Off
Auto scale
Street scale
City scale
State scale
Set to street/city/state scale to specify the
maximum scale of the zoom.
Lane Guidance On/Off slider
When on, the map guides you to the
correct lane in preparation of upcoming
turns.
Truck POI Icons On/Off slider
Select icons to display on map
Select travel centers, service, weigh
stations and truck POIs to display on the
map. Tap any category to fill in the
square and display those icons.
Address Book Icons On/Off slider
Address book entries appear as pushpin
icons unless they are assigned to a
group.
Truck Icon Use the arrows to select different icons to
display when using the truck setting.
Use the provided colors to select the truck
icon color.
Bus Icon Use the arrows to select different icons to
display when using the bus setting.
Use the provided colors to select the bus
icon color
POI Icons On/Off slider
Select icons to display on map
Select restaurants, banks, and other
consumer POIs to display on the map.
Tap any category to fill in the square
and display those icons.
OverDryve™ Pro II User Manual
Car/Light truck Icon Use the arrows to select different icons
to display when using the car setting.
Use the provided colors to select the
car icon color
23
5. Rand Navigation 2.0
Warnings Options
Warning Type None
Audio & Visual
Visual only
Audio only
Auto Dismiss Warnings Never
After 2 seconds
After 10 seconds
After 30 seconds
Height and weight violations will not be
auto dismissed.
Curve Warnings On/Off slider
Click the pencil to manually edit, or use
the slider to set distance.
Hill Warnings On/Off slider
Click the pencil to manually edit, or use
the slider to set distance.
Engine Brake Warnings On/Off slider
Click the pencil to manually edit, or use
the slider to set distance.
Narrow Road Warnings On/Off slider
Click the pencil to manually edit, or use
the slider to set distance.
Warnings Options
Speed limit On/Off slider
Set the amount over the posted limit at
which the warning appears.
Set a user-defined maximum speed to
be warned whenever the truck exceeds
that speed, regardless of posted
speed limits.
Speed Limit Change On/Off slider
Click the pencil to manually edit, or use
the slider to set distance.
Weigh Station On/Off slider
Click the pencil to manually edit, or use
the slider to set distance.
State/Province Border On/Off slider
Click the pencil to manually edit, or use
the slider to set distance.
Timezone Change On/Off slider
Toll Booth Alert On/Off slider
Click the pencil to manually edit, or use
the slider to set distance.
Maintenance On/Off slider
Construction Area On/Off slider
Click the pencil to manually edit, or use
the slider to set distance.
OverDryve™ Pro II User Manual
24
5. Rand Navigation 2.0
Destination Search
7
1 2
3
4 5
6
To access this window from the Home Screen, tap Where to?
1
Single-line Search
Begin typing to search for a destination.
2
Guided Search
Tap to access the guided search options.
3
Points of Interest
Tap to search for a point of interest (POI), such as a travel center,
restaurant, etc.
4
History
Tap to route to a recently entered location.
5
Bookmarks
Tap to view a list of saved locations.
6
Distance
Displays the distance to each destination in the list.
OverDryve™ Pro II User Manual
7
Back
Tap to return to the navigation screen.
25
5. Rand Navigation 2.0
Single-line Search
6
7
6
1
3
2
To access the single-line search window from the Home Screen, tap
Where to?
From this screen, you can begin typing an address, point of interest, or
any other destination type. The single-line search will return matching
results below.
1
Address/Text Search
Search for addresses, streets, cities and points of interest.
• Address searches should include either a city or postal code.
• Avoid using punctuations.
• Avoid using street prefixes and suffixes.
2
Matching Results
Destinations that match your search terms display here.
The address, city, and state display to the left.
The distance from your current location displays on the right.
Tap a destination to begin navigation.
3
See on Map
Tap to view the listed destinations on a map in a split-screen
view.
OverDryve™ Pro II User Manual
4
Selected Destination
Tap a destination from the list to select it.
The address, coordinates, and Motor Carriers’ Road Atlas reference
page are displayed.
5
Navigate
4
Tap to begin navigation to the selected destination.
6
Back
5
Tap to return to the previous screen.
7
Back to Map
Tap to return to the navigation screen.
26
1 2 3 4
5. Rand Navigation 2.0
Guided Search
1
New Location
Tap to route to a destination by entering the address, city center,
intersection, or by entering latitude and longitude coordinates.
2
My Trips
Tap to review your saved trips.
5 6 7
3
History
Tap to review your recent destinations.
4
Address Book
Tap to select a destination from your Address Book.
5
POIs
Tap to begin a point of interest search.
6
Home
Tap to route to your stored Home location.
7
Work
Tap to route to your stored Work location.
OverDryve™ Pro II User Manual
27
5. Rand Navigation 2.0
Using Guided Search
2
The Guided Search Keyboard in the Rand Navigation 2.0 app helps you
3
1
4
quickly locate your destination.
1
Auto-Complete Keyboard
As you key in characters, the keyboard only displays the next
possible letter or number. Letters and numbers that cannot be
entered in sequence are disabled.
Results are displayed as you key in characters.
2
Destination Entry
The top bar displays the current search.
3
Guided Search: City/Postal Code
Displays the available city/postal code selections based on the
information you have typed in.
Tap a result to advance.
4
Guided Search: Street
Displays the available street selections based on the city you
selected, and the information you have typed in.
If the next letter in the street name cannot be selected on the
keyboard, tap Expand Search to search a larger area.
Tap a result to advance.
OverDryve™ Pro II User Manual
5
Guided Search: House Number
Displays the available house numbers based on the city
and street selected, and the information you have typed in.
Tap a result to advance.
5
28
5. Rand Navigation 2.0
New Location
5
1
Address
Navigate to an address by entering the city (or postal code), street,
1 2 3 4
7
and house number.
2
City Center
Navigate to a city center.
3
Intersection
Navigate to the intersection of two roads within a specified city.
4
Coordinates
Navigate to a coordinate location.
Note: Rather than a city/street search, using the Coordinates
Guided Search prompts you to enter a numeric latitude and
longitude value.
5
Back
Tap to return to the previous screen.
6
Navigate
Once you select your destination through the guided search, click
the Navigate button to begin navigation.
OverDryve™ Pro II User Manual
7
Back to Map
Tap to return to the navigation screen.
6
29
1 2
5. Rand Navigation 2.0
My Trips
1
Multi-Stop Trips
Tap to view a list of saved multi-stop trips or to create a new one.
2
Trails
Use Trails to record a “bread-crumb” path where your truck has
traveled.
OverDryve™ Pro II User Manual
30
Multi-Stop Trips
5. Rand Navigation 2.0
1
Displays a list of recent destinations.
1
Tap to review and edit a saved trip.
2
Tap + New Trip to start a new multi-stop trip.
3
Trip details:
Displays the stops along your trip.
2
Tap the X to remove a stop.
Tap + Add a Location to add a new stop.
4
Tap to view Route avoids, Route details, and Overview.
Also tap to Save to My trips.
5
Tap to Reverse or Reorder your stops (manually or automatically).
6
Displays the travel time, traffic delays (if any), and toll costs for the
first leg of your trip.
7
Tap to compare and select alternate routes.
3
8
Tap to start the trip.
OverDryve™ Pro II User Manual
45
6
8
7
31
5. Rand Navigation 2.0
3
1
Trails
Use Trails to record a “bread-crumb” path where your truck has traveled.
The Trails feature is beneficial when traveling in areas where there is no
road network.
1
Tap to open an existing trail.
2
Tap to record a new trail.
2
3
Tap to edit or delete a trail.
4
Tap to stop recording.
5
View details about the trail.
6
Tap to begin navigation. Routing to an existing trail will take you to
the start of the trail. You can then follow the rest of the trail to your
destination.
7
Tap to edit or delete the trail.
4
8
Tap to display the trail on the navigation map.
5
8
OverDryve™ Pro II User Manual
7
6
32
5. Rand Navigation 2.0
History
3
Displays a list of recent destinations.
1
Destination
Tap an entry in the list to navigate to the destination.
1
2
2
Distance
Displays the distance to each destination from your current
location.
3
Options
Tap to access additional options.
Edit: Allows you to select and delete an entry in the history list.
Clear History: Deletes all entries.
OverDryve™ Pro II User Manual
33
1 2 3
4
5. Rand Navigation 2.0
Address Book
Displays your saved bookmarks, contacts, and group.
1
Bookmarks
Navigate to a saved address.
2
Contacts
Navigate to the stored address from a saved contact.
Note: Contacts are stored in the Contacts app. You can add
contacts manually or import them.
3
Groups
Options for organizing your bookmarks and contacts into
groups.
4
Destination
Tap a bookmark to navigate to the destination.
5
Alphabetic Organization
6
Tap a letter group to view bookmarks alphabetically. This is useful
if you have a lot of bookmarks, and they are difficult to find.
6
Options
Tap to sort, add, and delete bookmarks.
5
OverDryve™ Pro II User Manual
34
5. Rand Navigation 2.0
Address Book: Contacts
In order to use contacts for navigation, you first need to set them up in the
23
1
Rand Navigation 2.0 app. You can add contacts manually or import them.
1
Create a New Contact
Tap to manually create a new contact.
2
Search
Tap to search for an existing contact.
3
View
Tap a contact’s name to view and edit information about that
contact.
4
Edit Contact
Enter information about the contact.
Tap Save to save and return to the previous screen.
OverDryve™ Pro II User Manual
4
35
5. Rand Navigation 2.0
Address Book: Groups
Use Groups to organize your contacts and destinations into categories for
1
2
4
easier searching.
1
Available Groups
Displays the groups you have created.
2
New Group
Tap to create a new group.
3
Group Destination
Displays the destinations stored in the selected group.
Tap a destination to begin navigation.
4
Group Options
Tap in the corner to edit or delete destinations in a group.
5
Add Location
Tap to add a new location to the group.
You can add a new address, or select from your history,
bookmarks, or POIs.
OverDryve™ Pro II User Manual
3
5
36
5. Rand Navigation 2.0
POIs
Displays Points of Interest (POIs) near your current location, near a specific
location, along your intended travel route, or near your destination.
1 2 3 4
5
1
My Truck
Tap to display POIs near your current location.
2
A city
Tap to display POIs near a specific city.
3
My route
Tap to display POIs along your route.
4
My destination
Tap to display POIs near your destination.
5
POI Categories
Tap to select the POI category.
Note: Some categories may have multiple sub-categories to select
from.
6
Custom POI
Tap to display custom points of interest from an import.
7
Quick Stops
Displays a list of commonly searched POI categories.
OverDryve™ Pro II User Manual
6 7
37
5. Rand Navigation 2.0
4
3
Filter POIs
Truck-related points of interest such as Travel Centers and Truck Services
can include several amenities. To select only the locations with the
amenities that you are interested in, filter your search results.
1
2
1
Nearby Places
Lists destinations near your location that match the category
selected.
2
Map
Displays destinations near your location.
3
Filter
Search for points of interest by selecting available services.
4
Search
Search for points of interest by typing the name.
5
Tap a checkbox for a subcategory to include it in your search.
7
6
Tap to clear the filters.
OverDryve™ Pro II User Manual
7
Tap to go back and view the filtered POI list.
Please note that filter selections will remain active until you clear the filter.
5
6
38
5. Rand Navigation 2.0
POIs
When you select a POI category, a list of suggestions provided by Yelp (if
1
applicable) and a list of nearby places display.
3
Note: A Wi-Fi connection is required in order to display Yelp information.
1
Yelp Suggestions
Displays top-rated suggestions from Yelp.
Tap a destination to view additional information and begin
2
navigation.
2
Nearby, Along route or My destination
Displays matching POIs near the location specified, along with the
distance to each destination.
Tap a destination to view additional information and begin
navigation.
3
Map
Displays POIs near your truck, a city, your route, or your
destination.
4
More information
Displays additional information about the POI, including Yelp
4
review information, address and phone number.
Tap the Reviews link to view reviews on yelp.com.
5
5
POI Destination
Displays the selected POI on the map, along with the locations of
other nearby places.
OverDryve™ Pro II User Manual
6
Navigate
Tap to begin navigation to the selected POI.
6
39
5. Rand Navigation 2.0
Home/Work
You can set bookmarks for a Home and a Work location. This is useful so
you can quickly navigate to these destinations.
Tap Add Work or Add Home to set these locations.
1
1
Select Location
Tap New Location, History, or POIs to select a Home or Work
destination from among these options.
2
Choose on Map
Tap to set your Home or Work location by selecting a point on the
2 3
map.
3
Use Current Location
Tap to set your Home or Work location to your current location.
4
Create/Remove Bookmark
Use this button to create or remove a Bookmark.
4
5
Home/Work Information
Displays information about your Home or Work location.
6
Navigate
Tap to navigate to Home or Work.
5
OverDryve™ Pro II User Manual
6
40
5. Rand Navigation 2.0
History & Bookmarks
1
History
Displays your destinations that you have previously navigated to.
1
2
Bookmarks
Displays your saved locations.
For both History and Bookmarks:
Tap on the title of the tab to display the list of destinations.
Tap the destination to begin navigation.
2
OverDryve™ Pro II User Manual
41
5. Rand Navigation 2.0
1
2 3 4
5
6
17
7
8
15 16
9
1314
101112
Route Map Window
1
Next Maneuver
Instructions for your next maneuver.
2
Road Name
Next maneuver street name or highway sign.
3
Exits
Check upcoming exits for food, gas, hotels and other places.
4
Route Options
Tap to display additional options, including adding a stop, detours,
and ending navigation.
5
Map View Mode
Tap to switch the map view: 3D map, North up, or Heading up.
8
Volume Control
9
Distance Remaining
Displays a progress bar indicating the distance remaining to
your destination.
10
Expanded Map Display
Tap to remove additional options from the map screen.
11
Settings
Tap to open the Settings screens.
12
ETA/Time/Distance
Tap to change the view between the following Trip or Leg options:
ETA, Yard ETA, Remaining Time, Yard Time, and Elevation.
13
Location View
Tap to toggle between displaying the current location by city, street
name, or by the next cross street.
14
Virtual Dashboard
Tap to view information about your current location, route, trips,
and more.
15
Current Speed
Displays your current speed and turns red for speed warnings.
16
Speed Limit
Posted speed limit for your vehicle setting.
Tap to open a screen to submit a speed limit correction.
17
Map
Displays the map, your current route, and your vehicle’s current location.
6
Wi-Fi Connected Services
Tap to enable fuel prices, weather and traffic on the map.
Note: These options require a Wi-Fi connection.
7
Zoom In/Zoom Out
OverDryve™ Pro II User Manual
42
5. Rand Navigation 2.0
Exits
Slide out to show points of interest at upcoming exits.
The list displays the distance to the next exit, exit name and number,
and a count of available amenities.
1. Tap on an exit to display a list of POIs at the exit.
2. Tap the icon to display locations by category.
3. Tap on any item in the list to view additional information or
to route to the POI.
OverDryve™ Pro II User Manual
43
5. Rand Navigation 2.0
2 3
4 5
Trip Summary (for multi-stop trips)
7
Route Options
1
Route Overview
1
Displays the directions, highways and summary of your trip.
8
2
Search/Add Stop
Tap to add an additional destination(s) to your route.
3
Detour/Avoid
Tap to manage locations to avoid on the route, and automatically
calculate detours around them.
4
Route Settings
6
Tap to open the Route tab of the Settings screen.
5
Skip to Next Stop
Tap to skip the next destination in your route, and continue.
6
Stop Navigation
Tap to cancel the current route and return to the home screen.
7
Exit
Tap to close Route Options and resume your trip.
OverDryve™ Pro II User Manual
8
Save Trip
Tap to save your current trip.
44
5. Rand Navigation 2.0
Directions Tab
Highways Tab
Route Overview
1
Direction Tab
1
2
Displays the turn-by-turn directions for the current route.
2
Highways Tab
Displays the highways along your route, with the number of miles to
travel on each.
3
Summary Tab
Displays the total travel time and distance for your route, as
well as summaries for each leg of the trip (for multi-stop trips).
Summary Tab
OverDryve™ Pro II User Manual
3
45
5. Rand Navigation 2.0
Detour/Avoid
From Route Options, tap Detour/Avoid. There are four options available to
set up detours and permanent avoids:
1. Next miles allows you to detour a certain number of miles. Use the
slider to set the number of miles to detour/avoid.
2. A road allows you to avoid a specific road.
3. An area allows you to draw a polygon on the map. You will be
routed around this area.
4. Along the route allows you to select a step in your navigation to
avoid.
OverDryve™ Pro II User Manual
When selecting next miles, use the slider to set the number of miles that
are next along your route to avoid. Tap Detour to being using the new
route.
46
5. Rand Navigation 2.0
Detour/Avoid
When selecting A road, zoom in and out on the map to center the target
1
over the road to avoid. The road is highlighted in red. Tap Permanent
1
2
Avoid to always avoid it. Tap Detour to avoid it on this trip.
2
When selecting An area, tap on the map to set points for an area to avoid.
Tap Permanent Avoid to always avoid it. Tap Detour to avoid it on this trip.
3
OverDryve™ Pro II User Manual
3
When selecting Along the route, select the step on the route you wish to
avoid. Tap Detour to navigate around it.
47
5. Rand Navigation 2.0
Weather
1
When enabled, Weather displays current weather condition overlays
2
3
4
6
5
on the map.
Notes:
• Requires a Wi-Fi connection.
• The refresh speed of the weather display is dependent on the
connection speed. Weather information is updated every few
minutes while Wi-Fi connection is active.
• Weather display depends on active weather patterns and
map zoom level.
To view current weather information and the three-day forecast
for your location, tap the gear icon on the map screen and tap
the Weather tab.
1
Tap to enable weather.
2
Tap to view details and enter settings.
3
Select to view weather at your current location, or at your
destination.
4
Displays the current weather conditions at the location selected.
5
Displays the 3-day forecast for the location selected.
OverDryve™ Pro II User Manual
6
Tap to view and change weather preferences such as layer opacity
and weather type.
48
5. Rand Navigation 2.0
Traffic
To view traffic information, tap to enable the Traf fic slider on the map
screen. Traffic conditions will overlay on the map when traffic is enabled.
1
2
Note: Requires a Wi-Fi connection.
1
Tap to enable traffic.
2
Tap to view details and enter settings.
3
Select to view traffic flow, incidents, or both (All).
4
Displays the current traffic conditions/incidents along your route.
5
Displays the distance of the traffic conditions/incidents.
3
4
5
OverDryve™ Pro II User Manual
49
Traffic Icons
5. Rand Navigation 2.0
Accident
Exit Blocked Entrance Blocked Delay Spillage Road Work
Rain Snow Rock Fall High Temperature
Wind Thunderstorm Tornado Blizzard Avalanche
Danger
Traffic Event Closure
Carriageway
Low Temperature
Police
Road Weather
Ice
Fog
Size Limit
OverDryve™ Pro II User Manual
Weight Limit Visibility
Heavy
Traffic
Moderate
Traffic
Traffic Standstill
50
5. Rand Navigation 2.0
Fuel
To view fuel price information, tap to enable the Fuel slider on the map
screen. Current fuel prices will overlay on the map at various stations when
1
2
enabled.
Note: Requires a Wi-Fi connection.
1
Tap to enable fuel prices.
2
Tap to view details and enter settings.
3
Select to view fuel prices nearby, or along your route.
4
Displays the fuel stations based on the criteria you selected.
5
Displays the distance to each station.
6
Tap to sort fuel options.
7
Tap to view and change fuel preferences.
OverDryve™ Pro II User Manual
3
6 7
4
5
51
5. Rand Navigation 2.0
Virtual Dashboard
6
7
4
9
3
1112
5
1
1
Current location.
2
Displays current times at the yard, current location
and destination, as well as estimated time of arrival.
3
Sunrise and sunset times based on vehicle location
(latitude/longitude) and day.
4
Current speed (above) and posted speed limit (below).
2
8
10
Note: Turns red when speed limit warning exceeded.
5
Elevation at current location.
6
Current leg progress.
7
Gather trip information for up to three trips.
Includes odometer settings, hours, and speeds.
8
Displays the nearest cross street.
9
Current day and date at your location.
10
Add fuel purchase information.
11
Return to the Route Map Window.
12
Distance to next maneuver.
OverDryve™ Pro II User Manual
52
5. Rand Navigation 2.0
Fuel Logs
1. From the Virtual Dashboard, tap Fuel Log.
2. Tap a field to enter information. You can edit the following fields:
Fuel quantity, Fuel price, Total cost, Taxable, Location, Station, Date,
Last odometer, Current odometer. Distance, Current economy,
and Average economy are calculated automatically based on your
entries.
3. Tap Save to record the fuel purchase.
OverDryve™ Pro II User Manual
53
Junction View
5. Rand Navigation 2.0
1
When on a route, Junction Views display when you have an upcoming
maneuver. Set distance in Settings > Route. Once past the maneuver,
Junction View closes and the previous window displays.
1
Signs to follow for the next maneuver.
2
Includes exit number and highway name/number if applicable.
2
Distance to the upcoming maneuver. Distance decreases
as you approach the ramp.
3
3
Lane assist arrow.
4
4
Return to previous window.
Turn View
Displays for upcoming turns. Set distance in Settings > Route.
OverDryve™ Pro II User Manual
54
Truck Tools
To access, tap Truck Tools from the Main Menu.
1
Status, Mileage & Fuel
View driving information, mileage logs, and
fuel purchase information.
5. Rand Navigation 2.0
5
Calculator
6
Unit Converter
Quickly convert distance, weight, temperature,
and many more.
7
Notes
8
Tell Rand
Compose a message to send to Rand McNally.
9
Import Data & Export Data
Transfer address books, custom POIs, and saved trips from
your old TND device.
10
BackUp
Backup and restore utility.
11
Rand Motor Carrier’s Road Atlas
A digital version of Rand McNally’s Motor Carrier’s Road Atlas.
12
Get Apps
2
Rand Motor Carriers’ Road Info
View Rand McNally Truck Emergency contact
information and truck regulations.
3
Quick Planner
Between any two cities or towns, quickly calculate
the distance, driving time, and cost.
4
Calendar
OverDryve™ Pro II User Manual
55
6. TripMaker
®
1
2 3 4 5 6 7 8
TripMaker is a trip planning app that allows you to easily browse the map
and set up a multi-stop trip. Add via points and send your trip to the GPS
app for routing. To access TripMaker, tap the app tray, swipe to the right to
view the second app screen, then tap the TripMaker icon.
To create a trip:
1. Enter the starting and ending point for your trip.
2. Choose a name for it.
3. Tap Create Trip.
1
Access Menu
Manage your trip options, such as update route and fuel costs.
2
Itinerary
View your itinerary.
3
Directions
5
Once your trip is created, tap this icon for driving directions.
4
My Trips
Access trips that you have created.
OverDryve™ Pro II User Manual
5
Points of Interest
Search categories along your route, such as The Great Outdoors.
6
Search
Search for an address or place along your route.
7
Create a Trip
Enter addresses, cities, states, or zip codes to create a trip. Add stops
as needed. TripMaker will automatically order stops to minimize driving
distance, but you can re-order stops by pressing and dragging stops to
your desired position along the route.
8
Manage Menu
Manageyouraccountsettings,mapoptions,andndonlinehelp.
56
DriverConnect
7. DriverConnect
2
The DriverConnect app provides a fully-compliant electronic logbook
solution. DriverConnect lets you track and log Hours of Services, DriverVehicle Inspection Reports, Fuel purchases, and more. Reports can be
generated for roadside inspections.
The DriverConnect app connects to a Rand McNally Electronic Logging
Device (ELD) over a Bluetooth connection. The app automatically syncs
driving data from the ELD with the Rand McNally DriverConnect portal via
a Wi-Fi or cellular transmission.
1
Visit http://www.randmcnally.com/category/e-logs for up-to-date
information on compatible ELDs.
Sign Up or Log In
To use DriverConnect,you must log in with an existing account, or create
4
a new account. If you are part of a fleet, your Fleet Manager will provide
login information for you.
You can use your login information to access the DriverConnect portal,
where you can view reports and stored information.
3
OverDryve™ Pro II User Manual
Visit https://www.driverconnect.randmcnally.com to access the
DriverConnect portal.
57
8. Road Atlas
The Rand McNally Road Atlas is a digital version of
2
1
Rand McNally’s Road Atlas.
1
Legend
Tap Legend at the top right of the screen to view the roads and
related symbols.
2
Maps
Tap Maps at the top right of the screen to select pages by state/area.
You can also update maps here.
OverDryve™ Pro II User Manual
2
58
Your OverDryve™ Pro II tablet includes a built in dash cam;
the lens is in the back of the device.
9. Cameras
OverDryve™ Pro II User Manual
59
2
3 4 5
1
9. Cameras
Dash Cam
Record high quality video of your travels with the Dash Cam app.
1
Tap to start or stop recording.
2
Set your video preferences.
3
Tap to view Gallery.
4
Tap to record audio or mute.
5
Tap to take a still photo.
1. You can access your videos and photo captures from the Gallery.
Videos and Photos will be sorted in the order of capture.
OverDryve™ Pro II User Manual
2. Media can be recorded to both internal and external storage from
the settings.
60
9. Cameras
1. Video quality can be adjusted from settings with the option to choose
between Standard (480p), HD (720p), Full HD (1080p).
2. When recorded to internal storage, videos will be captured in
segments of 15 minute duration, until the device has 2 GB of free
storage space. This is to ensure proper functioning of the GPS app and
for future updates. For additional settings, use an external storage card
and enable the “Save to external storage” setting.
Video Quality Duration Approximate Disk Space
Standard 15 minutes
HD(720p)
Full HD(1080p)
15 minutes
15 minutes
1. When saving to external storage additional options are enabled to
enable loop recording, control the number of video segments and
length of the video segments captured.
450 MB
900 MB
1.5 GB
OverDryve™ Pro II User Manual
2. SD card of up to 128GB are supported. The SD Card will need to be
formatted for portable storage.
61
10. Entertainment
There are four options for listening to music, podcasts, audiobooks, etc.:
1. Stream music from your smartphone via Bluetooth. Access the audio
controls in the Bluetooth Player.
™
2. Stream music right from OverDryve
3. Download mp3s or other types of audio files. Access the audio controls
in the Media Player.
4. Listen to SiriusXM satellite radio.
You can activate the FM Transmitter to listen to audio through your
speakers. For more ways to listen to audio, refer to “Connect to Your
Truck Stereo” on page 9.
Note: To listen to music, the tablet must be in truck mode. To put the
tablet in truck mode, place it on the Smart Mount and plug the mount
into the vehicle adapter.
Bluetooth Player
Pro II by downloading music apps.
OverDryve™ Pro II User Manual
The Bluetooth player lets you stream any audio (music, podcasts,
™
audiobooks, etc.) from your phone to OverDryve
started, play some music from your phone. On OverDryve
Pro II. To get
™
Pro II, tap
Entertainment > Bluetooth Player. Swipe right or left anywhere on
the Bluetooth player screen to change tracks. For optimal sound, turn the
™
volume on your phone and OverDryve
Pro II up all the way.
Note: For help with connecting to Bluetooth, see“Connect to Bluetooth”
on page 8.
Phone Playback
You can control your phone’s audio controls such as Next, Previous, Play,
and Pause from your OverDryve
Entertainment > Bluetooth Player to access the controls.
™
Pro II. From the main menu, simply tap
62
FM Transmitter
10. Entertainment
The FM Transmitter makes it easy to listen to music from OverDryve
™
Pro II.
Just tap Entertainment > FM Transmitter > On. Tune your truck radio to
an open FM station and you’re set.
Finding the Best Station
In order to get the best possible reception from the FM Transmitter on
your truck stereo, you need to find the best FM frequency to transmit to.
The best frequency to use is one where no FM radio stations are currently
broadcasting on or near. FM reception can vary by geography and can also
vary depending on the location of your vehicle’s FM Antenna.
™
To start, attach the FM Transmitter antenna to OverDryve
mount. Next, tune your truck’s FM Radio to different stations until you
hear only static on a station. Be sure to use the “Tune” option in your
truck and not the “Seek” option, as Seek will skip over open stations.
Once you have found an open station, open the FM Transmitter app
™
on OverDryve
Pro II, turn it on and tune it to the same frequency. You
should hear the static stop and you will now hear any audio playing from
™
OverDryve
Next, change the direction of OverDryve
Pro II.
™
Pro II’s FM Transmitter Antenna
until you get the clearest sound. If you still hear static or the audio from
™
OverDryve
Pro II isn’t clear, tune your truck’s FM radio to a different open
station and repeat the process.
Pro II’s smart
OverDryve™ Pro II User Manual
63
10. Entertainment
FM Transmitter
Antenna
SiriusXM
Antenna
Note, the activation process
usually takes 10 to 15 minutes,
but may take up to an hour.
Your OverDryve Pro will need
to be powered on and receiving
the SiriusXM signal to receive
the activation message.
SiriusXM® smart mount
AUX out
USB
DC in
(power)
SiriusXM Radio
Your OverDryve™ Pro II tablet comes with a SiriusXM radio app preinstalled. To access SiriusXM,, tap Entertainment > SiriusXM. The SiriusXM
antenna cable must be installed, and the tablet connected to the Smart Mount.
Antenna Cable Routing
When routing antenna cable, always be careful to include enough slack
in your cable to accommodate open doors and driver space. Use things
typically found around the home, like electrical tape, to secure cables in
areas so that hinges do not pinch the cable with the door. Hide any excess
cable in the cabin trim.
Activating Your Radio
After installing your OverDryve
the antenna, launch the SiriusXM application from the ENTERTAINMENT
category. You should be able to hear the SiriusXM preview channel on
Channel 1. If you cannot hear the preview channel, please check the
installation instructions to make sure your SiriusXM smart mount tuner is
properly installed.
To receive the SiriusXM signal you will need to install the provided antenna.
SiriusXM satellites are located over the equator and the antenna must be
mounted in a location that has a unobstructed view to the south. Please
avoid placing the antenna under or directly next to metal or other dense
materials as it may result in signal loss.
™
Pro II tablet with SiriusXM smart mount and
OverDryve™ Pro II User Manual
™
To activate your SiriusXM subscription, please power on your OverDryve
Pro II
and launch the SiriusXM app. You should hear audio on the Preview
Channel (channel 1). If you do not hear audio, you need to adjust your
location or move the antenna so that it has as a clear view of the sky.
You will need your Radio ID, which can be found by tuning to Channel
0, or by looking at the sticker on the smart mount. The Radio ID does not
contain the letter I,O, S or F.
In the U.S., you can activate online or by calling SiriusXM Listener Care:
• Visit siriusxm.com/activatenow
• Call SiriusXM Listener Care at 1-866-635-2349
For Canadian Subscriptions, please contact:
• Visit www.siriusxm.ca/activate
• Call SiriusXM Customer Care at 1-888-539-7474
64
10. Entertainment
SiriusXM Functions
Direct Tune
Tap to display the Direct Tune interface.
Up (>) / Down (<)
Tab Up (>) / Down (<) to switch to the next available station.
Related
Displays similar genre channels based on the currently playing channel.
FFW, RRW, Pause/Play, LIVE
Fast forward (FFW, >>) and fast backward (RRW, <<) buttons play the
songs as buffered (up to 30 minutes) within the selected station in its
entirety. Pause button stops the music play without skipping any music
stream. Play button resumes music play in a continued stream. LIVE button
stops playing buffered content and syncs with Live broadcast.
Smart FAVORITES
Tune to,or set,a Smart FAVORITE.
OverDryve™ Pro II User Manual
TuneScan
Tap to get a short preview of songs that you have missed on each of your
SmartFavorites music channels. Find a song you like and tap the TuneScan
button again to continue listening to that song. The font changes blue
when scanning takes place. If you want to stop, tap TuneScan again. The
font color will change from blue to grey.
TuneStart
Tune to a channel and automatically start a song from the begining.
Tap Account Icon
> Tap Toggle on
Tune Mix
Tap to play a unique blend of songs from your SmartFavorites music
channels from the current SiriusXM Preset Band.
> Tap Settings > Tap Enable Tune Start
65
10. Entertainment
SiriusXM Functions
Categories
Tap to group stations into corresponding genres.
Featured
Tap to display the SiriusXM recommended/promoted channels of the
month.
History
Tap to display the channels in the order of most recently listened stations.
History stores the last 8 stations you listened to.
Reset User Data
Resetting the SiriusXM User data to the factory default setting
Tap Account Icon
> Tap Toggle on
Unsubscribe Channel Display
Enable unsubscribed channel view
Tap Account Icon
> Tap Toggle on
> Tap Settings > Tap User Factory Reset
> Tap Settings
> Tap Unsubscribe Channel
OverDryve™ Pro II User Manual
Parental Control
Lock and unlock channels with mature content. Default password is 0000
Tap Account Icon
> Tap Toggle on
Change Lock Code
If you need to change parental control code.
Tap Account Icon
> Tap Toggle on
> Tap Settings
> Tap Settings > Tap Change Channel Lock Code
> Tap Mature Channel Lock
66
10. Entertainment
Artist/Song Alerts
Get alerted when your favorite artists, songs or teams are playing on any
channel.
Tap artist name > Tap artist or song to add to your favorite > Tap Set
Your selection will be added to the favorites.
In order to manage them
Tap Account Icon
song/Artist you want to manage.
Disable: Allows you to keep it in favorites but doesn’t notify.
Delete: Removes it from favorites and notification.
> Tap Artists/Songs > Tap the three ellipses on the
OverDryve™ Pro II User Manual
67
10. Entertainment
SportsFlash Alerts
Will notify you when a big play happens during a game with one of your
favorite sports teams. Choose to tune in and hear the play unfold like
it was live. Continue listening to the game, or you can return to your
previous channel.
Tap Account icon
> Tap Sports> Tap Sports team to add to your
favorite> Tap Sports Flash> Tap Done.
Your selection will be added to the favorites.
In order to manage them
Tap Account Icon
> Tap Sports > Tap the three ellipses on the
Sports team you want to manage.
Disable: Allows you to keep it in favorites but doesn’t notify.
Delete: Removes it from favorites and notification.
OverDryve™ Pro II User Manual
68
10. Entertainment
Game/Team Alerts
Will notify you when a big play happens during a game with one of your
fGet alerted when a game involving your favorite team is actively playing
in a live broadcast game, or get a list of channels broadcasting live games
involving at least one of your favorite teams.
Tap Account icon
> Tap Sports> Tap Sports team to add to your
favorite> Tap Game Alerts > Tap Done.
Your selection will be added to the favorites.
In order to manage them
Tap Account Icon
> Tap Teams > Tap the three ellipses on the
Sports team you want to manage.
Disable: Allows you to keep it in favorites but doesn’t notify.
Delete: Removes it from favorites and notification.
OverDryve™ Pro II User Manual
69
10. Entertainment
Direct Tune
Scroll to the left or right, or tap the <Back or Next> buttons, to scroll
between available stations. You can also type the station number to
navigate directly to that station.
Tap a station icon to listen.
Tap the X to close Direct Tune.
Smart FAVORITES
OverDryve™ Pro II User Manual
You can set up to 15 presets,or Smart FAVORITES,in three scrollable
panels.
Tap and hold a Smart FAVORITES icon to set the station.
Tap and hold again to:
Replace: Set a new Smart FAVORITES channel over the existing one.
Clean: Delete the Smart FAVORITE
Cancel: Return to the SiriusXM interface.
Once a Smart FAVORITE is set, tap the channel icon to play that channel.
70
11. Troubleshooting
Rand McNally has designed OverDryve™ Pro II for speed and reliability.
However, from time to time, all Android devices run into problems. If your
unit becomes unresponsive for any reason, it’s always best to restart the
unit by turning it off and on again.
Restarting the Device
1. Restart the unit by holding down the power button for 3 seconds, or
until you see the Power Off screen.
2. Press Power Off.
3. Once the unit has shut down, press and hold the power button for 2 to
4 seconds to turn it back on.
If the unit is unresponsive and you don’t see the power down button
appear on the screen, hold down the power button for 10 to 15 seconds
and the device will turn off completely. Once the unit has shut down, press
and hold the power button for 2 to 4 seconds to turn it back on.
Resetting the Device
To reset the OverDryve™ Pro II to its factory state:
1. Power off the tablet. If needed, press and hold the POWER BUTTON
for 10 seconds to power off the device.
2. PRESS and HOLD the HOME BUTTON and POWER BUTTON
simultaneously until the device display turns on. The tablet will then
boot into recovery mode.
3. Press the VOLUME DOWN BUTTON and highlight the “Wipe data/
factory reset” option and press the POWER BUTTON to select.
4. A confirmation to “Wipe all user data?” is displayed. Use the VOLUME
DOWN BUTTON to highlight “Yes” and press the POWER BUTTON to
select.
5. The device will perform the factory reset and will return to the recovery
mode screen.
6. With the “Reboot system now” option highlighted, press the POWER
BUTTON to reboot the device.
7. Wait for the tablet to complete the reboot. The tablet will now be
reset to the factory state.
OverDryve™ Pro II User Manual
For additional help and FAQs, visit
randmcnally.com/support.
71
For more information
• Rand McNally Website
randmcnally.com/overdryvepro2
• Support
randmcnally.com/support
• Accessories
store.randmcnally.com
• Facebook
facebook.com/randmcnally
12. More Information
OverDryve™ Pro II User Manual
72
Trademarks
Rand McNally and the globe logo are registered trademarks, and OverDryve is a trademark
of RM Technologies, Inc., d/b/a Rand McNally.
SiriusXM and all related marks and logos are trademarks of SiriusXM Radio, Inc. All rights
reserved.
The Trucker’s Friend and National Truck Stop Directory are registered trademarks of the
TR Information Publishers.
TruckDown is a registered trademark of Truckdown Info International, Inc.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Weather data provided by Vaisala.
Fuel prices provided by Gasbuddy.
Traffic information provided by INRIX, Inc.
© 2020 Rand McNally. © 2020 HERE. All rights reserved.
Rand McNally follows a continuous improvement process and reserves the right to provide
enhancements that may not be reflected in the pictures and specifications in this manual.
The information contained herein may be changed at any time without prior notification.
Neither this manual nor any parts thereof may be reproduced for any purpose whatsoever
without the express written consent of Rand McNally, nor may it be transmitted in any
form, either electronically or mechanically, including photocopying and recording. All
technical specifications, drawings, etc. are subject to copyright law.
OverDryve™ Pro II User Manual
73
Warnings, End-User License Agreement, and Warranty
CAUTION: RAND MCNALLY MAKES NO WARRANTY AS TO THE ACCURACY OR COMPLETENESS OF THE INFORMATION IN THE PRODUCT, THE SOFTWARE OR THE DOCUMENTATION, AND DISCLAIMS ANY AND ALL EXPRESS, IMPLIED OR STATUTORY
WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTY AS TO QUALITY, PERFORMANCE, TITLE OR NON- INFRINGEMENT. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO SOME CONSUMERS.
IN NO EVENT WILL RAND MCNALLY OR ITS LICENSORS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
IT IS THE USER’S RESPONSIBILITY TO USE THIS PRODUCT PRUDENTLY AND IN ACCORDANCE WITH THE DOCUMENTATION. THIS PRODUCT IS INTENDED TO BE USED ONLY AS A TRAVEL AID AND MUST NOT BE USED FOR ANY PURPOSE REQUIRING PRECISE MEASUREMENT OF
DIRECTION, DISTANCE, LOCATION OR TOPOGRAPHY.
The User agrees to allow information provided by the User to Rand McNally to be used for internal business evaluation purposes, including, but not limited to, evaluating the effectiveness of the Product and the services provided and methods to simplify or improve User experiences.
Such information will not be provided to third parties in any way that discloses the identity of the User.
Rand McNally may make use of third party software in the Product. Notwithstanding the terms and conditions of this license, use of some third party materials included in the Product may be subject to such third party’s terms and conditions. The third party copyright notices are
provided at the end of this License.
The User agrees to indemnify, defend and hold Rand McNally and its licensors (including their respective licensors, suppliers, assignees, subsidiaries, affiliated companies, and the respective of officers, directors, employees, shareholders, agents and representatives of each of them)
free and harmless from and against any liability, loss, injury (including injuries resulting in death), demand, action, cost, expense or claim of any kind or character, including but not limited to attorney’s fees, arising out of or in connection with any use or possession by the User of this
Product.
These terms and conditions constitute the entire agreement between Rand McNally (and its licensors and suppliers) and the User pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agreements previously existing between us with respect
to such subject matter. The terms and conditions (including the license) may be updated from time to time with or without notice.
The above terms and conditions shall be governed by the laws of Illinois, without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. The User agrees to submit to the
jurisdiction of Illinois courts for any and all disputes, claims and actions arising from or in connection with the User’s license warranty and use of the Product hereunder.
User shall not export the Product in violation of any U.S. or foreign laws. Rand McNally’s licensors shall be third party beneficiaries of Rand McNally’s rights under this license, but are not parties hereto and have no obligations hereunder.
By using this Product you agree to be bound both by the foregoing and to any additional terms of use found at www.randmcnally.com.
Actual toll costs may vary from estimates depending upon a number of factors including inaccurate or imprecise source data and variable toll costs, which are dependent upon vehicle characteristics (class, axle number, weight, etc.) that vary across toll roads.
Restricted Rights Legend. For governmental agencies: Use, reproduction or disclosure is subject to restrictions set forth in subparagraph (c) (1) (iii) of the Right in Technical Data and Computer Software clause at DFARS 52.227-7013, as amended.
Rand McNally, the globe logo, and TripMaker are registered trademarks and OverDryve is a trademark of RM Technologies, Inc., d/b/a Rand McNally.
Portions © 2020 HERE. All rights reserved. This data includes information taken with permission from Canadian authorities, including © Her Majesty the Queen in Right of Canada, © Queen’s Printer for Ontario.
© 2020 Rand McNally. All rights reserved. U.S. Patent Nos. 7,580,791 and 8,214,141.
OverDryve™ Pro II User Manual
74
Loading...