Rand McNally OverDryve Instruction Manual

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This device complies with FCC SAR exposure limits set forth for an uncontrolled environment.

SAR compliance for using the equipment in close proximity to the human body has been evaluated at 0mm.

This equipment must not be co-located or operating in conjunction with any other antenna or transmitter.

End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Caution!

Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Canada Statement

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage;

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

This equipment should be installed and operated with a minimum distance of 0mm between the radiator and your body.

Cet équipement devrait être installé et actionné avec une distance minimum de 0mm entre le radiateur et votre corps.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur.

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur aﬁn de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

OverDryve™ User Manual i

About GPS

The Global Positioning System (GPS) is a constellation of satellites that a GPS receiver uses to calculate geographical positions. To determine a position, data from at least three satellites is required. To determine elevation, the data from four or more satellites is required. Accuracy of the positioning varies from 10 feet to several hundred feet, depending on vehicle placement and the surrounding environment.

Geographical terrain (such as mountains), man-made structures (such as highway overpasses, bridges, and tall buildings), as well as weather can interfere with the GPS signal. For best GPS reception, position the device and mount with a clear line of sight to the sky. Some vehicles may have a limited view of the sky due to metal sun shields or a metallized windshield coating.

Map data includes the geographical coordinates for address locations and points of interest (POIs). With GPS reception, your device calculates a route to your selected location.

VIP Customer Support

™

Questions about using OverDryve

? Our team is ready to help.

Call toll-free:

800-237-7270

E-mail:

support@randmcnally.com

OverDryve™ User Manual ii

Table of Contents

1. Your OverDryve™ .......................................................................... 1

Caution: Important Safety Information ..............................................1

Box Contents ....................................................................................2

Install the Mount ...............................................................................2

OverDryve

™

Tablet .............................................................................3

™

Smart Mount ..................................................................3

Using the Android Home Screen ........................................................4

2. Getting Started ............................................................................. 5

Setup ................................................................................................5

Connect to the Internet ...............................................................6

Connect to Bluetooth .................................................................. 8

Connect to Your Car Stereo .........................................................9

Device Settings ................................................................................ 11

3. Messaging ................................................................................... 14

4. Phone ........................................................................................... 16

5. Navigation ....................................................................................17

How the GPS App Works ............................................................... 17

Main Menu ..................................................................................... 18

Preferences .....................................................................................19

Search For an Address ..................................................................... 22

Virtual Dashboard ..................................................................... 28

Traf ﬁc .......................................................................................30

Weather ....................................................................................32

Fuel Prices .................................................................................33

Route to Here, Set Origin, Add as Via ........................................34

6. TripMaker ..................................................................................... 35

7. Road Atlas.................................................................................... 36

8. Cameras ....................................................................................... 37

Dash Cam .......................................................................................38

Video Files ................................................................................. 38

9. Monitoring .................................................................................. 39

Tire Pressure Monitoring ................................................................. 39

10. Entertainment ............................................................................. 40

Bluetooth Player ..............................................................................40

Phone Playback .........................................................................40

FM Transmitter ................................................................................ 41

11. Troubleshooting .......................................................................... 42

Restarting the Device ......................................................................42

Resetting the Device ........................................................................42

12. More Information ....................................................................... 43

Helpful Tips on Entering Addresses ............................................23

Route Map Window ........................................................................24

View Directions .........................................................................25

Exits Quick View ........................................................................27

OverDryve™ User Manual iii

Caution: Important Safety Information

1. Your OverDryve

™

Navigation

• Use this device at your own risk.

• Attend to this device only when it is safe to do so.

• Trafﬁc laws and regulations always have priority over any instructions from the navigation system.

NOTE: If you do not understand the spoken instructions or are unsure of what to do, refer to the navigation map on your device.

Installation

• Make sure that the mount is securely mounted and properly adjusted before each trip.

• Make sure that the mount does not impair the driver’s visibility.

• Do not attach the mount within the airbag deployment zone.

• Install the mount in a manner that minimizes risk in the event of an accident.

• After installation, check all safety-related equipment to ensure that it operates without interference from the device, its cables, or any other accessories.

Device

• Do not use sharp-edged objects on the device touch screen.

• The device is not waterproof and is not protected against water damage.

• Protect the device from extreme temperatures. Operating temperature for the device is between 32 degrees F and 120 degrees F.

• Do not open the device casing.

• Do not attempt to replace the battery. Contact Rand McNally Customer Support with questions about the battery.

• Always follow local regulations when disposing of this device.

NOTE: Make sure that there are no kinks in the cable and that it will not be damaged by any sharp objects.

NOTE: Use only a moist cloth to clean the device.

NOTE: Do not pull the cable to unplug the unit.

• Connect the wall charger to a 120V or 240V outlet only.

• Connect the vehicle charger to a 12V outlet only.

OverDryve™ User Manual 1

1. Your OverDryve

™

Box Contents

• OverDryve™ tablet

• Smart mount

• Bracket with suction cup

• Car charger

• USB wall charger

• Dash mount disc

• FM transmitter antenna

• AUX cable

• Anti-glare screen protector

Install the Mount

Note: Follow all local regulations governing the placement of the mount.

1. Select an area with a line of sight to the sky and GPS satellites.

2. Clean and dry the mounting area.

3. Remove the suction cup protective ﬁlm.

4. Attach the two pieces of the mount together and lock into place.

5. Adjust the angle of the mount.

6. Pull the suction cup lever up to release suction.

7. Plug the power cord into the mount and the vehicle’s 12-volt power source.

8. Place and hold the mount suction cup against the mounting surface.

9. Press the suction cup lever down until it snaps into place.

10. Snap the tablet onto the mount.

11. Adjust the tablet so that it can be easily seen and does not block the driver’s line of sight.

OverDryve™ User Manual 2

1. Your OverDryve

OverDryve™ Tablet OverDryve™ Smart Mount

™

AUX out

DC in (power)

Power

Home

Volume

Down Up

FM Transmitter

Antenna

Micro SD

card

Micro HDMI

(video out)

Micro USB

(power)

AUX out

USB

OverDryve™ User Manual 3

1. Your OverDryve

Swipe down to view notiﬁcations and settings

4 6

3 5

Using the Android Home Screen

™

After you turn on your device, the home screen will display.

109 11

At the top of the home screen is the status bar. It displays important information like your Wi-Fi connection, remaining battery life, time, etc. The status bar will display at the top of almost every screen.

Swipe down at the top of the status bar and your Notiﬁcations panel will display. The tablet notiﬁes you when something needs your attention, such as an e-mail, text message, or device update.

Tap or swipe down in the Notiﬁcations panel and a Quick Settings panel will display. The Quick Settings panel contains often used features such as Wi-Fi connection, Bluetooth, and location services (GPS). It also displays an Android Settings icon in the top right corner. Tap the Android

Settings icon to access a full menu of device settings.

Notiﬁcations icons

GPS indicator

Bluetooth indicator

Wi-Fi indicator

Battery power

Current time

Settings (Android Settings and OverDryve™ Setup)

All apps

Back

Home

View open apps

OverDryve™ User Manual 4

2. Getting Started

Setup

Connect to the Internet

Enable the Wi-Fi hotspot on your smartphone or other in-vehicle device and then connect OverDryve setup.

™

or connect to your home Wi-Fi to complete

Connect to Bluetooth

™

Enable Bluetooth on your smartphone and pair OverDryve

to enable

hands-free calling and texting, music streaming, and voice assistance.

Connect to your car stereo system

You can listen to audio through any of the following four methods:

1. Plug an AUX cable into the Smart Mount and the AUX port in your car.

Note: Do not plug the AUX cable into the audio out port on

™

OverDryve

2. Use the Smart Mount speaker.

3. Use the FM Transmitter. To use the FM transmitter, attach the antenna

™

to the Smart Mount. On OverDryve

, tap Entertainment > FM

Transmitter and follow the instructions

4. Add an AUX input to your existing car. Visit randmcnally.com/aux-install to learn more.

Note: If your device has not been able to detect your location, you may be asked to set your time zone.

OverDryve™ User Manual 5

Connect to the Internet

2. Getting Started

First activate the Wi-Fi hotspot on your phone or in your car. From the

™

OverDryve

setup screen, tap Get Started to begin the setup process.

Tap Find my hotspot.

Select a Wi-Fi network and connect.

A message will display that states you are connected. Tap Next.

OverDryve™ User Manual 6

2. Getting Started

Tap Next to proceed to the next step.

OverDryve™ User Manual 7

2. Getting Started

Connect to Bluetooth

Connect to your phone via Bluetooth to allow OverDryve™ to call and text hands-free and to stream music from your phone to your car’s stereo system.

First enable Bluetooth on your phone.

™

From OverDryve

1. Tap Connect.

2. Tap Scan For Devices. A Bluetooth pairing request will display on

™

your OverDryve

3. Tap Pair. If successful, the screen will display a connected message. If

™

the OverDryve

failed to connect, verify that your phone is in range

and Bluetooth is enabled.

Help for Connecting to Bluetooth

If you are having issues connecting OverDryve™ to your smartphone via Bluetooth, these steps can help:

™

1. Make sure that your OverDryve proximity to each other, preferably within ﬁve feet.

2. Check that both devices do not have a low battery. Some devices will disable Bluetooth to conserve power when the battery gets low.

3. Power the devices off and then back on.

4. Turn off any devices that may be interfering with the Bluetooth connection. For example, if you usually pair your OverDryve different phone, turn off that phone.

and smartphone are in close

™

with a

OverDryve™ User Manual 8

2. Getting Started

Connect to Your Car Stereo

To listen to audio through your car stereo, the tablet must be in car mode. To put the tablet in car mode, place it on the Smart Mount and plug the mount into a power source using the car charger.

The optimal way to connect to your car stereo is with the provided AUX cord. You can also connect wirelessly via OverDryve’s FM transmitter.

To connect with the AUX cable:

1. Tap Connect via AUX.

™

2. Plug the right-angle end of the AUX cable into the OverDryve Mount.

Smart

Note: Do not plug the AUX cable into the audio out port on

™

OverDryve

3. Plug the other end into your car’s AUX jack.

4. Set your car’s audio source to AUX.

To use the FM transmitter:

1. Attach the FM antenna to the Smart Mount.

2. Unplug the AUX cable if it is plugged in.

3. Tap the settings icon located in the top right corner of the

™

OverDryve

4. Tap OverDryve

screen.

™

Setup > Audio > Connect via radio.

OverDryve™ User Manual 9

2. Getting Started

Connect to Your Car Stereo (Continued)

Using the OverDryve™ Speakers

Your tablet has its own speaker, and there’s another powerful speaker

™

in the Smart Mount. You can use the OverDryve

speakers instead of connecting to your car stereo. If you want to connect to the car stereo later, tap the Settings icon in the top right corner of the screen, then

™

OverDryve

Setup > Audio.

OverDryve™ User Manual 10

2. Getting Started

Device Settings

Swipe down from the top of the screen to view the Quick Settings panel and adjust the following frequently used features:

• Battery Power

• Settings Icon – Access a full menu of all settings

• Brightness – Changes the screen brightness

• Wi-Fi – Shows available networks

• Bluetooth

• Airplane Mode – Turns off Wi-Fi and Bluetooth

• Auto Rotate – Controls whether the screen rotates

when you rotate the tablet

• Location – Turn on/off location services (GPS)

OverDryve™ User Manual 11

2. Getting Started

From the Quick Settings panel, tap the Settings icon to access a full menu of settings for your device.

Wireless and Networks

• Wi-Fi – View and connect to available Wi-Fi networks.

• Bluetooth – Pair with your smartphone using Bluetooth.

Device

• Display – Set brightness, wallpaper, appearance, etc.

• Sound & Notiﬁcation – Set volumes for different features and enable

and disable sounds.

™

• Storage – View how much storage is available on your OverDryve

• Battery – View time spent on battery and battery power used

by different apps.

• Apps – View apps. Swipe left to view: downloaded, running, all.

OverDryve™ User Manual 12

+ 35 hidden pages

Rand McNally OverDryve Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual