RANDELL FX3-4N1SSB User Manual
PROJECT NAME:
LOCATION:
ITEM NO:
FX SERIES
HIGH CAPACITY MODEL FX3-4N1SS
Three refrigerated inserts with cooking equipment finished top, on casters. Whether operating as a refrigerator,
freezer, rapid chiller or safety thaw, the FX Series revolutionizes point of use refrigeration by allowing the operator
to adjust the temperatures from -5°F (freezer) operation up to 40°F (refrigerator) or any setting in between utilizing
its unique convertible refrigeration system. Using a patented technology that provides 100% in-drawer cooling,
this ultra-efficient self-contained system operates as a refrigerator, freezer, rapid chiller and safety thaw.
AVAILABLE MODELS:
FX3-4N1SST
FX3-4N1SSTC
FX3-4N1SSTB
FX3-4N1SSC
FX3-4N1SSCB
FX3-4N1SSB
STANDARD FEATURES:
• Convertible Refrigeration System (Refrigerator to
Freezer)
• Rapid Chills 20 lbs. of Product Stored in (2) 12x20x2”
Pans in 4 Hours
• Safety Thaws 20 lbs. of Product Stored in (2) 12x20x2”
Pans in 6-8 Hours
• Point-of-use Size and Design
• Precise Temperature Control
• Patented In-drawer Cooling System
• Removable Insulated Drawer Compartment
• Ambient Drawer Track System
• Full-Extension Drawer System
• 100% Front Breathing
• Horizontal Gasket is Out of Harms Way
• Individual Compressor Per Drawer
• 3.5” Casters
REFRIGERATION SYSTEM: The FX Series
uses a patented in-drawer cooling system that directs
100% of the cooling inside the insulated and removable
drawer Insert (see below). The evaporator coil is mounted
horizontally above the drawer Insert with an integral gasket
that seals against the insulated drawer compartment
when closed. The refrigeration system operates only
when the drawer is closed, efficiently managing the
air-flow while reducing energy and humidity build-up.
Press-fit removable gasket with magnet-to-magnet seal is
standard.
DRAWER SYSTEM: The FX Series drawer system
is the only full-extension, full product view, drawer
system that has the drawer tracks outside the cooled
compartment offering a more reliable, durable system
not prone to the cold or debris environment common
in traditional drawer systems. The full-extension tracks
are constructed of corrosion resistant coated steel with
a fully integrated support system. The drawer box and
intermediate tracks are removable with simple tools
and can only be reinstalled one-direction for proper fit.
The drawer system has been tested with over 300,000
cycles without failure (90 pound test load per drawer).
REMOVABLE INSULATED INSERT: This
exclusive design allows full removal of the refrigerated
compartment for cleaning or pre-loading. Made of
high impact ABS plastic with high density polyurethane
insulation. Provides unparalleled insulation value with
no air gaps.
TEMPERATURE STATEMENT: The unit
is provided with a electronic temperature controller
that can be easily adjusted by the operator to any
temperature setting between -5°F (freezer) operation
up to 40°F (refrigerator).
CABINET EXTERIOR: The cabinet exterior is
high grade stainless steel where seen to allow long use
and beauty while providing easy to maintain and clean
surfaces.
CABINET BASE/INTERIOR: The cabinet
interior is high grade stainless steel where seen to
allow long use and beauty while providing easy to
maintain and clean surfaces.
ELECTRICAL: Standard 115 volt with two NEMA
5-15 cord and plug sets.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
QTY:
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION: 11400
Triple stacked drawer unit with
finished top, on casters. Model FX34N1SS shown.
OPTIONS/ACCESSORIES:
6” Leg Kit
Stainless Steel Back Panel
Additional Insulated Inserts:
Qty. _____
Thaw Racks
Pan Racks
Recessed Handle(s)
Poly Tub Divider
Stainless Steel Tub Divider
FX Series
PPSPECFX34N1SS RevA
Revised 10/13
[1100]
27.7"
[704]
FX3-4N1SS
Incorporating
Adande®
Technology
43.3"
[1100]
33.7"
[856]
28.0"
[712]
3.4"
[87]
11.0"
[280]
46.7"
[1187]
31.1"
[791]
15.5"
[394]
15.6"
[395]
9.2"
[234]
43.3"
51.2"
[1300]
15.6"
[395]
3.6"
[91]
28.0"
[711]
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Loading...