Powersolve SR10-05 User Manual

DC-DC Switching Regulator

SR10-05 Series

www.powersolve.co.uk

10A SIP & SMT Packages
Non-Isolated

Features

• Non-Isolated POL Converter

• SIP / SMT Packages

• Output Current 10A

• Input Voltage Range 3.0 - 5.5VDC

• Efficiency to 95%

• Over Temperature Protection

• Continuous Short Circuit Protection

• Remote On/Off Control

Electrical Specification

INPUT

Input Voltage Range 3.0 - 5.5V (5V nominal)

Under Voltage Lock-out 2.8V typ. (Power Up)

Input Filter Capacitive
Remote On/Off Control Open Circuit or equal to Vin (Module On)

OUTPUT

Voltage Accuracy ±1.5% max.
Transient Response: 25% step load change <200µ sec.
Ripple and Noise (20MHz BW) [3] 20mV rms, 50mV pk-pk max.
Temperature Coefficient ±0.03% / °C
Short Circuit Protection Continuous
Line Regulation [1] ±0.2%
Load Regulation [2] ±0.5%
Capacitive Load, Low ESR 10000µF max.
External Trim Adj. Range ±10%

GENERAL

Efficiency See Table
Isolation Voltage Non-Isolated
Switching Frequency 300KHz typ.
Over Temperature Protection 120°C typ.
Operating Temperature Range -40°C to +85°C
Power Derating See derating curves
Storage Temperature Range -55°C to +125°C
Dimensions 50.8 x 12.7 x 8.3 mm (2.00 x 0.50 x 0.33 Inches) (SIP Package)

Case Non-potted open frame type
Weight 6.8g

NOTE:

1. Measured from High Line to Low Line.

2. Measured from Full Load to No Load.

3. Output noise & ripple is measured with a 10µF tantalum & 1µF ceramic capacitor across the output.

4. It is recommended to put a 100µF capacitor with ESR<20mΩ across the input to reduce the input ripple voltage.

5. Suffix ‘N’ to model number for Negative Logic Remote On/Off Control.

4.5 - 5.5V (3.3V output version)

2.7V typ. (Power Down)

<0.4VDC (Module Off)

33.0 x 12.46 x 9.3 mm (1.30 x 0.53 x 0.366 Inches) (SMT Package)

Typical at nominal line, full load & 25°C unless otherwise stated.

Powersolve Electronics Ltd.  8A Arnhem Road,  Newbury, RG14 5RU.  England

Tel: [phone]  Fax: [phone]  Email: [e-mail]

DC-DC Switching Regulator

www.powersolve.co.uk

Output Voltage and Current Ratings

MODEL INPUT OUTPUT OUTPUT INPUT CURRENT % EFF.

SR10-05-10 3.0 - 5.5VDC 1.0V 10A 50mA 2353mA 85%
SR10-05-12 3.0 - 5.5VDC 1.2V 10A 50mA 2791mA 86%
SR10-05-15 3.0 - 5.5VDC 1.5V 10A 50mA 3409mA 88%
SR10-05-18 3.0 - 5.5VDC 1.8V 10A 50mA 4000mA 90%
SR10-05-20 3.0 - 5.5VDC 2.0V 10A 60mA 4396mA 91%
SR10-05-25 3.0 - 5.5VDC 2.5V 10A 60mA 5376mA 93%
SR10-05-33 4.5 - 5.5VDC 3.3V 10A 60mA 6947mA 95%

Nominal Input Voltage 5.0VDC.

Add suffix “TH” for SIP Package or “SM” for SMT Package.

VOLTAGE VOLTAGE CURRENT No Load Full Load

Mechanical and Connection Details

SIP Packages

Simplified Schematic

SR10-05-xxSM (Vin = 5V) Derating CurveSR10-05-xxTH (Vin = 5V) Derating Curve

All Dimensions in Inches (mm).
Tolerance: Inches x.xx ±0.02 x.xxx ±0.010

Millimeters x.x ±0.5 x.xx ±0.25

SMT Packages

BOTTOM VIEW OF BOARD

Pin Function

1 +Vout
2 +Vout
3 +Sense
4 +Vout
5 Common
6 Common
7 +Vin
8 +Vin

9 No Pin
10 Trim
11 On/Off Control

Powersolve Electronics Ltd.  8A Arnhem Road,  Newbury, RG14 5RU.  England

Tel: [phone]  Fax: [phone]  Email: [e-mail]