Page 1
U
nit 8A
Arnhem Road
Newbury. RG14 5RU
Tel: +44 (0) 1635 521858
Fax: +44 (0) 1635 523771
www.powersolve.co.uk
SM 3000 - Se ries 3000 W DC POWER SUP PLIES
Mod els
SM 15-200 D 0 - 15 V 0 - 200 A
SM 30-100 D 0 - 30 V 0 - 100 A
SM 45-70 D 0 - 45 V 0 - 70 A
SM 70-45 D 0 - 70 V 0 - 45 A
SM 120-25 D 0 - 120 V 0 - 25 A
SM 300-10 D 0 - 300 V 0 - 10 A
Features Functionalities
• De signed for long life at full power
• Ex cel lent dy namic re sponse to load changes
• Pro tected against all over load and short cir cuit con di tions
• EMC sur passes CE re quire ments:
low emis sion & high im mu nity
• Low au di ble noise: fans are tem per a ture con trolled
• Avail able op tions: High Speed Pro gram ming, In ter faces,
Ex tra Iso la tion, Se quencer, Power Sink etc.
Volt age range
Cur rent range
• Mas ter/Slave par al lel and se ries op er a tion with
volt age and cur rent shar ing
• Stack ing is al lowed, space be tween units is not
re quired
• High power sys tem con fig u ra tion from mul ti ple units
• 19" rack mount ing or for lab o ra tory use
(feet in cluded)
• Re mote sens ing
• In ter lock
Three phase input
Page 2
Out put
volt age
cur rent
In put
AC 3 phase, 48 - 62 Hz
for use at 380 V, 400 V, 415 V
nom i nal line - line volt age
SM3000
SM 15-200 D SM 30-100 D SM 45-70 D SM 70-45 D SM 120-25 D SM 300-10 D
0 - 15 V
0 - 200 A
342 - 457 V
0 - 30 V
0 - 100 A
342 - 457 V
0 - 45 V
0 - 70 A
342 - 457 V
0 - 70 V
0 - 45 A
342 - 457 V
0 - 120 V
0 - 25 A
342 - 457 V
0 - 300 V
0 - 10 A
342 - 457 V
cur rent (400 V AC / 3 phase )
power fac tor (380 V / 3 phase)
100% load
50% load
DC
fuses
standby in put power (Vo=Io=0)
standby in put power (Vo=V
max
)
Ef fi ciency
AC 3 phase in put, full load
Reg u la tion
Load 0 - 100% CV
Line 342 - 457 V AC CV
Load 0 - 100% CC
Line 342 - 457 V AC CC
Rip ple + noise, rms / p-p CV
(BW = 20 MHz)
CC
Temp. coeff., per °C CV
CC
Sta bil ity
af ter 1 hr warm-up
dur ing 8 hrs CV
CC
dur ing 30 hrs CV
CC
t
= 25 ± 1 °C
amb
5.7 Arms
0.88
0.78
con tact
fac tory
16 AT
25 W
50 W
5.5 Arms
0.88
0.78
con tact
fac tory
16 AT
25 W
50 W
5.8 Arms
0.88
0.78
con tact
fac tory
16 AT
25 W
50 W
5.8 Arms
0.88
0.78
con tact
fac tory
16 AT
25 W
50 W
5.5 Arms
0.88
0.78
con tact
fac tory
16 AT
25 W
50 W
87 % 90 % 89 % 90 % 90 % 90 %
5 mV
5 mV
50 mA
50 mA
2 / 12 mV
100 / 250 mA
5 mV
5 mV
25 mA
25 mA
1.6 / 8 mV
20 / 60 mA
5 mV
5 mV
15 mA
15 mA
3.5 / 17 mV
20 / 60 mA
10 mV
5 mV
10 mA
10 mA
2 / 12 mV
6 / 25 m A
typ i cal 10.10 -6, max. 35.10
typ i cal 20.10 -6, max. 60.10
typ i cal 2.10-5, max 4.10
typ i cal 3.10-5, max. 10.10
typ i cal 2.10-5, max. 5.10
typ i cal 5.10-5, max. 10.10
10 mV
10 mV
10 mA
10 mA
5 / 25 mV
7 / 25 mA
-6
-6
-5
-5
-5
-5
5.5 Arms
0.88
0.78
con tact
fac tory
16 AT
25 W
50 W
15 mV
10 mV
3 mA
3 mA
10 / 50 mV
be low 50 V:
25 / 120 mV
3 / 10 mA
be low 50 V:
60 / 200 mA
An a log Pro gram ming
CV CC
Pro gram ming in puts
in put range
ac cu racy
temp. coeff. off set
in put im ped ance
± 0.2% 0 mV … + 8 mV (on 5V)
0 - 5 V
10 µV / °C
1 MOhm
± 0.5% 0 mV … + 20 mV (on 5V)
0 - 5 V
150 µV / °C
1 MOhm
Mon i tor ing out put
out put range
ac cu racy
temp. coeff. off set
out put im ped ance
± 0.2% - 3 mV … + 11 mV
0 - 5 V
10 µV / °C
20 Ohm
± 0.5% - 5 mV … + 0 mV
0 - 5 V
150 µV / °C
20 Ohm
Ref er ence volt age
on prog. con nec tor Vref
TC
+ 12 V Out put V0
on prog. connector Imax
R0
5.165 ± 31 mV
typ i cal 12 ppm / max. 30 ppm
± 12 V
25 mA
500 Ω
Sta tus out puts
CC-sta tus
OVP-sta tus
Re mote Shut Down
Page 1 - 2 SPECIFICATIONS Rev. Sept. 2012
5V / 10 mA = logic 1
5V / 10 mA = logic 1
with + 5V or re lay con tact
Page 3
SM3000
Pro gram ming speed
Stan dard Ver sion
(re sis tive load)
Rise time (10 - 90%)
out put volt age step
time, (100 % load)
time, (10 % load)
Fall time (90 - 10%)
out put volt age step
time, (100 % load)
time, (10 % load)
Pro gram ming band width
small sig nal
large sig nal,(100 % load)
large sig nal,(10 % load)
Pro gram ming speed
High Speed Ver sion
(re sis tive load)
Rise time (10 - 90%)
out put volt age step
time, (100 % load)
time, (10 % load)
Fall time (90 - 10%)
out put volt age step
time, (100 % load)
time, (10 % load)
SM 15-200 D SM 30-100 D SM 45-70 D SM 70-45 D SM 120-25 D SM 300-10 D
0 → 15 V
7 ms
7 ms
15 → 0 V
7 ms
32 ms
50 Hz
50 Hz
5 Hz
SM 15-200 D
op tion P104
0 → 15 V
0.36 ms
0.26 ms
15 → 0 V
0.37 ms
1.60 ms
0 → 30 V
7 ms
7 ms
30 → 0 V
7 ms
58 ms
50 Hz
50 Hz
5 Hz
SM 30-100 D
op tion P031
0 → 30 V
0.33 ms
0.32 ms
30 → 0 V
0.55 ms
3.50 ms
0 → 45 V
7 ms
7 ms
45 → 0 V
8 ms
29 ms
50 Hz
50 Hz
5 Hz
SM 45-70 D
op tion P105
0 → 45 V
0.50 ms
0.35 ms
45 → 0 V
0.60 ms
5.00 ms
0 → 70 V
7 ms
7 ms
70 → 0 V
8 ms
82 ms
50 Hz
50 Hz
5 Hz
SM 70-45 D
op tion P032
0 → 70 V
0.45 ms
0.30 ms
70 → 0 V
0.67 ms
6.00 ms
0 → 120 V
7 ms
7 ms
120 → 0 V
7 ms
39 ms
50 Hz
50 Hz
5 Hz
SM 120-25 D
op tion P106
0 → 120 V
0.34 ms
0.32 ms
120 → 0 V
0.38 ms
3.50 ms
0 → 300 V
7 ms
7 ms
300 → 0 V
11 ms
91 ms
50 Hz
50 Hz
5 Hz
SM 300-10 D
op tion P061
0 → 300 V
1.00 ms
0.40 ms
300 → 0 V
1.20 ms
11.0 ms
Re cov ery time
re cov ery within
di/dt of load step
time, @ 50 - 100% load step
max. de vi a tion
Noise sup pres sion
line - line ⇒ out put
line - earth ⇒ out put
Out put im ped ance
CV, 0-100 kHz
Pul sat ing load
max. tol er a ble AC com po nent
of load cur rent
f > 1 kHz
f < 1 kHz
In su la tion
in put / out put
creepage / clear ance
in put / case
out put / case
Safety
EMC Power Sup ply Stan dard
50 mV
2.7 A/µs
100 µs
250 mV
90 dB
90 dB
50 mV
1.9 A/µs
100 µs
150 mV
84 dB
90 dB
100 mV
1.2 A/µs
100 µs
200 mV
85 dB
90 dB
50 mV
2.2 A/µs
100 µs
250 mV
75 dB
90 dB
0.5 V
1.7 A/µs
100 µs
1.5 V
75 dB
90 dB
1.5 V
0.6 A/µs
100 µs
2 V
90 dB
90 dB
< 25 mOhm < 20 mOhm < 60 mOhm < 60 mOhm < 150 mOhm < 800 mOhm
15 Arms
200 A peak
15 Arms
100 A peak
10 Arms
70 A peak
10 Arms
45 A peak
5 Arms
25 A peak
2.5 Arms
10 A peak
3750 Vrms (1 min.)
8 mm
2500 Vrms
600 V DC
EN 60950 / EN 6 1010
EN 61204-3,
Emis sion: res i den tial, light in dus trial en vi ron ment (CISPR22-Class B)
Im mu nity: in dus trial en vi ron ment
Ge neric Emis sion
Ge neric Im mu nity
Op er at ing tem per a ture at full load
Hu mid ity
EN 61000-6-3, res i den tial, light in dus trial en vi ron ment (EN 55022B)
EN 61000-6-2, in dus trial en vi ron ment
− 20 to + 50 °C
max. 95% RH, non con dens ing, up to 40 °C
max. 75% RH, non con dens ing, up to 50 °C
Stor age tem per a ture
Ther mal pro tec tion
Out put shuts down in case of in suf fi cient cool ing
MTBF
Rev. Sept. 2012 SPECIFICATIONS Page 1 - 3
− 40 to + 85 °C
500 000 hrs
Page 4
SM3000
Hold-Up time
100% load Vin = 3x 380 V AC
50% load Vin = 3x 380 V AC
Turn on de lay
af ter mains switch on
In rush cur rent
Phase loss
Se ries op er a tion
max. to tal volt age
Mas ter / Slave op er a tion
Par al lel op er a tion
max. to tal cur rent
Mas ter / Slave op er a tion
Re mote sens ing
max. volt age drop per load lead
OVP / OVL
ad just ment range
Po ten ti om eters
front panel con trol with knobs
res o lu tion
6 ms
15 ms
300 ms
5.8 A @ 400 V AC in put
The power sup ply will con tinue to op er ate on one phase but at 90% of V
out
(max)
(a SM30-100D ad justed at 27 V will con tinue to de liver 27 V af ter phase loss)
SM 15-200 D SM 30-100 D SM 45-70 D SM 70-45 D SM 120-25 D SM 300-10 D
600 V
yes
no limit
max. 4 units
600 V
yes
no limit
max. 4 units
600 V
yes
no limit
max. 4 units
600 V
yes
no limit
max. 4 units
600 V
yes
no limit
max. 4 units
600 V
yes
no limit
max. 4 units
2 V 2 V 2 V 2 V 2 V 2 V
0 - 17 V 0 - 35 V 0 - 54 V 0 - 80 V 0 - 140 V 0 - 350 V
stan dard
0.03 %
stan dard
0.03 %
stan dard
0.03 %
stan dard
0.03 %
stan dard
0.03 %
stan dard
0.03 %
screw driver ad just ment
at front panel
at rear panel
Me ters
scale volt age
scale cur rent
ac cu racy
Mount ing
In put Ter mi nals
in put con nec tions
Out put Ter mi nals
Pro gram ming con nec tor
Cool ing
au dio noise level
En clo sure
de gree of pro tec tion
Di men sions
be hind front panel: h x w x d
front panel: h x w
Weight
op tion P001
op tion P002
3.5 digit
0 - 15.00 V
0 - 200 A
0.5% + 2 digit
op tion P001
op tion P002
3.5 digit
0 - 30.0 V
0 - 100.0 A
0.5% + 2 digit
op tion P001
op tion P002
3.5 digit
0 - 45.0 V
0 - 70.0 A
0.5% + 2 digit
op tion P001
op tion P002
3.5 digit
0 - 70.0 V
0 - 45.0 A
0.5% + 2 digit
op tion P001
op tion P002
3.5 digit
0 - 120.0 V
0 - 25.0 A
0.5% + 2 digit
Stack ing of units al lowed, air flow is from left to right.
screw ter mi nals for ca ble 1.5 - 4.0 mm
2
3 phase + earth (no neu tral re quired)
M10 bolts M10 bolts M10 bolts M8 bolts 7 mm bind
post
15 pole D-con nec tor at rear panel (FE MALE)
Low noise blower, fan speed adapts to tem per a ture of in ter nal heatsink.
ca. 50 dBA at full load and 25 °C am bi ent tem per a ture
ca. 60 dBA at full load and 50 °C am bi ent tem per a ture
IP20
128.5 x 443 x 416 mm (with op tion P099, feet are re moved)
128.5 x 483 mm (19", 3 U)
15 kg
op tion P001
op tion P002
3.5 digit
0 - 300 V
0 - 10.00 A
0.5% + 2 digit
6 mm bind
post
Page 1 - 4 SPECIFICATIONS Rev. Sept. 2012
Page 5
SM3000
0,4ms
Typical Applications
• Solar inverter testing, PV-Simulation • Automotive battery simulations • Driving PWM-controlled DC-motors
• Plasma chambers • Controlled battery (dis)charging • Accurate current sources
• Hybrid Car test systems • Lasers • Aerospace and military equipment
• ATE in industrial production lines
Available Options
In creased Out put Power
The conservatively rated unit
allows to deliver extra output with
the same reliability.
At some derating, either the maximum output
voltage or the maximum output current can be
increased by about 10%.
• Order Code - P069
Sequencer
Arbitrary Waveform generator or
standalone automation.
The sequencer is integrated in the
Ethernet controller.
High speed
pro gram ming
A 10 to 20 times higher
programming speed (down to
0.33 ms rise time at full load)
and lower output capacitance.
Excellent for laser applications, test systems or
as current source with low parallel capacitance
as used in plasma chambers.
• Order Code :
SM 15-200 D P104 - SM 70-45 D P032
SM 30-100 D P031 - SM 120-25 D P106
SM 45-70 D P105 - SM 300-10 D P061
High Volt age Isolation
A higher output isolation allows
series operation up to 1000V.
Two-Quad rant
Out put: Power sink
Two quadrant operations
maintains the output voltage
constant regardless the
output power is positive or negative. Ideal
for PWM-speed controlled DC-motors and
ATE systems.
• Order Code :
SM 15-200 D P127 - SM 45-70 D P129
SM 30-100 D P128
- SM 70-45 D P130
Se cured Volt age
and Cur rent Set ting
For a maximum security,the
CV/CC settings can be
adjusted with a screwdriver
only and are protected with a plastic cap
from accidental adjusting.
• Order Code - P149
• Order Code - P089
• Order Code - P001
Soft ware con trol
and in ter faces
Factory installed
programming interfaces:
• ISO AMP Card - isolated analog - P145
• RS232 controller - P146
• IEEE488 controller - P164
• Ethernet controller (incl. sequencer) - P149
• PROFIBUS controller - P275
• CANBUS controller - P276
otes: 1. Down load spe cial datasheet about High Speed Pro gram., Power Sink and Bat tery Charg ing from www.powersolve.co.uk
N
2. There is only room for one of the in ter faces in a unit (P145, P146, P149, P164, P275, P276)
Rev. Sept. 2012 SPECIFICATIONS Page 1 - 5
Page 6
Con nec tions pro gram ming con nec tor
An a log Pro gram ming (stan dard )
or Ethernet or RS232 or IEEE488
or CANBUS or PROFIBUS or
iso lated an a log (all op tional)
Out put Ter mi nals
CV= Con stant Volt age
CC=Con stant Cur rent
OVP=Over Volt age Pro tec tor
OVL=Over Volt age Limit (Pro tec tion)
Spec i fi ca tions mea sured at
t
= 25 ± 5 °C and Vin = 3x 380 V AC,
amb
50 Hz un less oth er wise noted.
No Line Cord
sup plied
SM3000
In put Con nec tor
Progr. Switches
Man ual / Program
Sense Block
Safety Cover sup plied for in put.
Cover for out put must be or dered sep a rately.
L1
L2
L3
Feet can be re moved
(op tion P099)
Page 1 - 6 SPECIFICATIONS Rev. Sept. 2012
Loading...