Powersolve PSU100 User Manual

Page 1
AACC--DDCC CCoonnvveerrtteerrs
s
PSO100/PSU100 Series
Single Outputs
Up to 100 Watts
Features
Power Factor Correction
Wide Universal Input Voltage of 90-264VAC
Single DC Output
Industry Standard 5 x 3” footprint
Available as Open PCB or in Aluminium U Channel
Full Safety Approvals
EMC to FCC Part 15 Class B & CISPR-22 Class B
Any DC output voltage available from 3-50V DC
www.powersolve.co.uk
Electrical Specification
AC Input 90-264VAC, 47-63Hz
Power Factor Correction 0.95 Minimum
Input Current 2A Max, Low Line, Full Load
Inrush Current 30A Max, Cold Start, 230VAC Input
Efficiency 80% Typical
DC Outputs See table
Line Regulation 0.5% Typical, 1% Max
Load Regulation See table
oltage Pr
Over V
Over Current Protection 110-150% Nominal Output Power
ransient Response
T
Hold Up T
Start Up Time 1 Sec Typical, 2 Sec Max
Ripple & Noise 1% Typical, 2% Max
Earth Leakage Current 0.45mA Max
Operating Temperature 0 to 70ºC, Derate Linearly from 100% Load at 50ºC to 50% Load at 70ºC
Storage Temperature -40 to +85ºC
Relative Humidity
EMC FCC Part 15 Class B, CISPR-22 Class B
Safety Appr
otection
ime
ovals
112-132% V Nominal
4mS, Full Load to 50% Load
16mS Min, 110V AC Input, Full Load Output
95% Max Non Condensing
UL, cUL60950, TUV/GS(EN60950), CE
Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England
Tel:01635 521858 Fax: 01635 523771 Email: sales@powersolve.co.uk
Page 2
AACC--DDCC CCoonnvveerrtteerrs
s
www.powersolve.co.uk
Output Voltage & Current Ratings
MODEL MODEL DC OUTPUT TOTAL MAXIMUM
(OPEN PCB VERSION) (U CHANNEL VERSION) REGULATION OUTPUT POWER
PSO100-3V3 PSU100-3V3 3.3V 16.36A 5% 54 Watts
PSO100-05 PSU100-05 5V 14A 5% 70 Watts
PSO100-09 PSU100-09 9V 11.1A 5% 100 Watts
PSO100-12 PSU100-12 12V 8.33A 3% 100 Watts
PSO100-15 PSU100-15 15V 6.67A 3% 100 Watts
PSO100-18 PSU100-18 18V 5.56A 3% 100 Watts
PSO100-24 PSU100-24 24V 4.17A 2% 100 Watts
PSO100-30
PSO100-36 PSU100-36 36V 2.78A 2% 100 Watts
PSO100-48 PSU100-48 48V 2.08A 2% 100 Watts
PSU100-30 30V 3.33A 2% 100 Watts
Note: Any output voltage version is available between 3V and 50V DC – consult the sales office for details.
Mating Connectors: Input: Molex Housing 09-50-3031 Crimp Terminals: Molex 2478
Output: Molex Housing 09-50-3131 Crimp Terminals: Molex 2478
Pin Connection
3 4 5 6 7 8 9 10 11 12 13
2
Pin
PSO100/PSU100-XX OUT OUT OUT OUT OUT OUT RTN RTN RTN RTN RTN RTN N/C
1
Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England
Tel:01635 521858 Fax: 01635 523771 Email: sales@powersolve.co.uk
Page 3
echanical Specification - PSO100 Series
M
ote:
N
. Dimensions are shown in inches or mm.
1
2. Weight: 345gs approx.
www.powersolve.co.uk
Mechanical Specification - PSU100 Series Note:
1. Dimensions are shown in inches or mm.
2. Weight: 475gs appr
ox.
Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England
Tel:01635 521858 Fax: 01635 523771 Email: sales@powersolve.co.uk
Loading...