Powermatic 520B User Manual

FEATURES

Digital readout allows the user to see the exact RPM that the spindle is turning at for more accurate adjustments and ﬁne tuning

Redesigned headstock allows for better chisel angles when turning the back side of a bowl against the headstock

Redesigned tool rest geometry allows for better chisel movement along the tool rest

Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not mar or damage any of the drive centers

Tool caddy mounts directly to the lathe which allows the user to store all the necessary tools right under the headstock

Tailstock storage keeps a chip free area to store other often used accessories

Model 3520B

Stock Number 1352001

Distance Between Centers (in.) 34-1/2

Swing Over Bed (in.) 20

Overall Length (in.) 50

Spindle Speeds 0-1200 / 0-3200 RPM

Motor 2HP, 220V

Lathe Power Requirements 220V, 3PH or 1PH

Spindle Thread Size 1-1/4” x 8 T.P.I.

Head/Tailstock Taper #2 Morse

Height 44” (Adjustable)

Weight 650 lbs

Tailstock Quill Travel (in.) Over 4

3” Faceplate standard

14” Toolrest standard

Drive System Poly V Belt, Inverter Drive

Spindle Lock standard

Knock Out Rod, Brass Tipped standard

Drive Center standard

Multiple Ball Bearing Line Center standard

Hole through Tail Stock Spindle (in.) 3/8

Hole through Head Stock Spindle (in.) 5/8

Footprint of stand (in.) 50L x 24W