SSH60
Exploded Parts Manual
L20-221 Rev 6 (10/12)
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain this manual
for the life of the equipment:
Model #: ___________________________
Serial #: ___________________________
Date Purchased: ____________________
ENGLISH
SG14, SG14T, SG18, SG14R, SGC, SG18F, SGM1824,
SGM24, SGM34 Gas Fryer Models
Built after 11/1999
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
2
Post in a prominent location the instructions to be
followed in the event that an operator smells gas.
Obtain this information from your local gas
supplier.
WARNING
DO NOT store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
WARNING
Improper installation, alteration, service or maintenance can
cause property damage, injury or death. Read the installation,
operating and maintenance instructions thoroughly before
installing or servicing this appliance.
WARNING
Installation, maintenance and repairs should be performed by a
Pitco Authorized Service and Parts (ASAP) company techni cian
or other qualified personnel. Installation, maintenance or repairs
by unauthorized or unqualified personnel will void the warranty.
WARNING
Installation and all connections must be made according to
national and local regulations and codes in force.
WARNING
During the warranty period if a customer elects to use a non-
original part or modifies an original part purchased from Pitco
and/or its Authorized Service and Parts (ASAP) companies, this
warranty will be void. In addition, Pitco and its affiliates will not
be liable for any claims, damages or expenses incurred by the
customer which arises directly or indirectly, in whole or in part,
due to the installation of any modified part and/or received from
an unauthorized service center.
WARNING
This appliance, when installed, must be electrically grounded in
accordance with local codes, or in the absence of local codes,
with the National Electrical Code, ANSI/NFPA 70, or the Canadian
Electrical Code, CSA C22.2, as applicable.
WARNING
Adequate means must be provided to LIMIT the movement or this
appliance without depending on the gas or electrical cord
connection. Single appliances equipped with legs must be
stabilized by installing anchor straps. All appliances equipped
with casters must be stabilized by installing restraining chains.
WARNING
An appliance equipped with casters and a flexible gas line must
be connected to the gas supply with a quick disconnect device.
This quick disconnect must comply with ANSI Z24.41.
WARNING
DO NOT alter or remove structural material on the appliance to
accommodate placement under a ventilation hood.
WARNING
This appliance is intended for professional use only and should
be operated by fully trained and qualified personnel.
WARNING
If the appliance is equipped with a power cord and it is damaged,
it must be replaced by a Pitco Authorized Service and Parts
(ASAP) company technician, or a similarly qualified person in
order to avoid a hazard.
WARNING
The power supply must be disconnected before servicing,
maintaining or cleaning this appliance.
WARNING
The appliance is NOT jet stream approved. DO NOT clean the
appliance with a water jet.
WARNING
DO NOT attempt to move this appliance or transfer hot liquids
from one container to another when the unit is at operating
temperature or filled with hot liquids. Serious personal injury
could result if skin comes in contact with the hot surfaces or
liquids.
WARNING
DO NOT sit or stand on this appliance. The appliance’s front
panel, tank, splash back, tank cover, workshelf, drain board is
not a step. Serious injury could result from slipping, falling or
contact with hot liquids.
WARNING
NEVER use the appliance as a step for cleaning or accessing the
ventilation hood. Serious injury could result from slips, trips or
from contacting hot liquids.
WARNING
The oil/shortening level should NOT fall below the minimum
indicated level line at any time. The use of old shortening can be
dangerous as it will have a reduced flash point and be more
prone to surge boiling.
WARNING
The contents of the crumb catch and/or filter pan of any filter
system must be emptied into a fireproof container at the end of
each day. Some food particles can spontaneously combu st if left
in certain types of oil or shortening.
WARNING
Completely shut the appliance down when shortening/oil is being
drained from the appliance. This will prevent the appliance from
heating up during the draining and filling process. Serious injury
can occur.
WARNING
This appliance is intended for indoor use only.
WARNING
DO NOT operate appliance unless all panels and access co vers
are attached correctly.
WARNING
It is recommended that this appliance be inspected by a qualified
service technician for proper performance and operation on a
yearly basis.
WARNING
There is an open flame inside this appliance. The unit may get
hot enough to set nearby materials on fire. Keep the area around
the appliance free from combustibles.
WARNING
DO NOT supply the appliance with a gas that is not indicated on
the data plate. If you need to convert the appliance to another
type of fuel, contact your dealer.
WARNING
DO NOT use an open flame to check for gas leaks!
WARNING
If gas flow to appliance is interrupted, or pilots extinguish, wait 5
minutes before attempting to relight the pilot to allow any
residual gas in appliance to dissipate.
WARNING
Ensure that the appliance can get enough air to keep the flame
burning correctly. If the flame is starved for air, it can give off a
dangerous carbon monoxide gas. Carbon monoxide is a clear
odorless gas that can cause suffocation.
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
3
This Page Left Intentionally Blank
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
4
TABLE OF CONTENTS
FRYER EXPLODED VIEWS .............................................................................................................................. 6
FRYER EXPLODED VIEW 1 PARTS LIST ................................................................................................................................................................................ 6
F
RYER EXPLODED VIEW 1 .................................................................................................................................................................................................. 7
F
RYER EXPLODED VIEW 2 PARTS LIST ................................................................................................................................................................................ 8
F
RYER EXPLODED VIEW 2 .................................................................................................................................................................................................. 9
A) TANK & FLUE ............................................................................................................................................. 10
TANK & FLUE DRAWING A PARTS LIST .............................................................................................................................................................................. 10
T
ANK & FLUE DRAWING A ................................................................................................................................................................................................. 11
B) BURNER ASSEMBLY ................................................................................................................................. 12
BURNER ASSEMBLY DRAWING B PARTS LIST B(A) ............................................................................................................................................................. 12
B
URNER ASSEMBLY DRAWING B ....................................................................................................................................................................................... 13
B
URNER ASSEMBLY DRAWING B PARTS LIST B(B) ............................................................................................................................................................. 14
C) GAS TRAIN ................................................................................................................................................. 15
GAS TRAIN DRAWING C1 PARTS LIST ................................................................................................................................................................................ 16
G
AS TRAIN DRAWING C1 .................................................................................................................................................................................................. 17
G
AS TRAIN DRAWING C2 PARTS LIST ................................................................................................................................................................................ 18
G
AS TRAIN DRAWING C2 .................................................................................................................................................................................................. 19
D) GAS CONVERSION KITS ........................................................................................................................... 20
GAS CONVERSION KITS QUICK REFERENCE ...................................................................................................................................................................... 20
G
AS CONVERSION KITS SIMPLE INSTRUCTIONS DRAWING D .............................................................................................................................................. 21
G
AS CONVERSION KITS SLOT FACE BURNERS PARTS LIST D1 ........................................................................................................................................... 22
G
AS CONVERSION KITS WIRE FACE BURNERS PARTS LIST D2 ........................................................................................................................................... 23
G
AS CONVERSION KITS SGC PARTS LIST D3 .................................................................................................................................................................... 24
G
AS CONVERSION KITS SGM PARTS LIST D4 ................................................................................................................................................................... 25
G
AS CONVERSION KITS SLOT FACE BURNERS (CE) PARTS LIST D5 ................................................................................................................................... 26
G
AS CONVERSION KITS WIRE FACE BURNERS (CE AND AUSTRALIA) PARTS LIST D6 .......................................................................................................... 27
G
AS CONVERSION KITS SGC (CE) PARTS LIST D7 ........................................................................................................................................................... 28
G
AS CONVERSION KITS SGM (CE) PARTS LIST D8 ........................................................................................................................................................... 29
E) FRYER CABINET ........................................................................................................................................ 30
MODULAR CABINET DRAWING E1 PARTS LIST E1(A) ......................................................................................................................................................... 30
M
ODULAR CABINET DRAWING E1 ...................................................................................................................................................................................... 31
M
ODULAR CABINET DRAWING E1 PARTS LIST E1(B) ......................................................................................................................................................... 32
M
ODULAR CABINET DRAWING E1 PARTS LIST E1(C) ......................................................................................................................................................... 33
S
TANDARD CABINET DRAWING E2 PARTS LIST .................................................................................................................................................................. 34
S
TANDARD CABINET DRAWING E2 .................................................................................................................................................................................... 35
F) ENTRANCE BOX ......................................................................................................................................... 36
ENTRANCE BOX DRAWING F PARTS LIST ........................................................................................................................................................................... 36
E
NTRANCE BOX DRAWING F ............................................................................................................................................................................................. 37
G) CONTROL BOX .......................................................................................................................................... 38
CONTROL BOX PRE 8/00 DRAWING G1 PARTS LIST ........................................................................................................................................................... 38
C
ONTROL BOX PRE 8/00 DRAWING G1 ............................................................................................................................................................................. 39
C
ONTROL BOX POST 8/00 DRAWING G2 PARTS LIST ......................................................................................................................................................... 40
C
ONTROL BOX POST 8/00 DRAWING G2 ........................................................................................................................................................................... 41
H) SMALL ASSEMBLIES ................................................................................................................................ 42
SMALL ASSEMBLIES DRAWING H PARTS LIST .................................................................................................................................................................... 42
S
MALL ASSEMBLIES DRAWING H ....................................................................................................................................................................................... 43
I) DRAIN LINE .................................................................................................................................................. 44
DRAIN LINE DRAWING I PARTS LIST ................................................................................................................................................................................... 44
D
RAIN LINE DRAWING I ..................................................................................................................................................................................................... 45
J) FILTER PAN ................................................................................................................................................ 46
FILTER PAN DRAWING J PARTS LIST ................................................................................................................................................................................. 46
F
ILTER PAN DRAWING J .................................................................................................................................................................................................... 47
K) WASTE OIL MANAGEMENT ...................................................................................................................... 48
WASTE OIL MANAGEMENT DRAWING K PARTS LIST ........................................................................................................................................................... 48
W
ASTE OIL MANAGEMENT DRAWING K ............................................................................................................................................................................. 49
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
5
L) PUMP ASSEMBLY ......................................................................................................................................50
PUMP ASSEMBLY PRE 3/04 DRAWING L1 PARTS LIST ........................................................................................................................................................50
P
UMP ASSEMBLY PRE 3/04 DRAWING L1 ..........................................................................................................................................................................51
P
UMP ASSEMBLY POST 3/04 DRAWING L2 PARTS LIST ......................................................................................................................................................52
P
UMP ASSEMBLY POST 3/04 DRAWING L2 ........................................................................................................................................................................53
P
UMP ASSEMBLY SFSG DRAWING L3 PARTS LIST ............................................................................................................................................................54
P
UMP ASSEMBLY SFSG DRAWING L3 ...............................................................................................................................................................................55
M) PUMP BOX ..................................................................................................................................................56
PUMP BOX DRAWING M PARTS LIST ..................................................................................................................................................................................56
P
UMP BOX DRAWING M ....................................................................................................................................................................................................57
N) RETURN LINE .............................................................................................................................................58
RETURN LINE DRAWING N PARTS LIST ..............................................................................................................................................................................58
R
ETURN LINE DRAWING N ................................................................................................................................................................................................59
O) FLUSH HOSE ASSEMBLY .........................................................................................................................60
FLUSH HOSE ASSEMBLY DRAWING O PARTS LIST ..............................................................................................................................................................60
F
LUSH HOSE ASSEMBLY DRAWING O ................................................................................................................................................................................61
P) FLUSH HOSE (HOSE) ASSEMBLY ............................................................................................................62
FLUSH HOSE (HOSE) ASSEMBLY DRAWING P PARTS LIST ..................................................................................................................................................62
F
LUSH HOSE (HOSE) ASSEMBLY DRAWING P ....................................................................................................................................................................63
Q) BASKET LIFT ..............................................................................................................................................64
BASKET LIFT DRAWING Q PARTS LIST ...............................................................................................................................................................................64
B
ASKET LIFT DRAWING Q .................................................................................................................................................................................................65
R) BASKET LIFT COMPONENTS ...................................................................................................................66
BASKET LIFT COMPONENTS DRAWING R PARTS LIST .........................................................................................................................................................66
B
ASKET LIFT COMPONENTS DRAWING R ...........................................................................................................................................................................67
S) ACCESSORIES ...........................................................................................................................................68
ACCESSORIES DRAWING S PARTS LIST S(A) .....................................................................................................................................................................68
A
CCESSORIES DRAWING S ...............................................................................................................................................................................................69
A
CCESSORIES DRAWING S PARTS LIST S(B) .....................................................................................................................................................................70
T) BNB ..............................................................................................................................................................72
BNB DRAWING T PARTS LIST ...........................................................................................................................................................................................72
BNB
DRAWING T ..............................................................................................................................................................................................................73
U) DROP INS ....................................................................................................................................................74
DROP INS DRAWING U PARTS LIST ....................................................................................................................................................................................74
D
ROP INS DRAWING U ......................................................................................................................................................................................................75
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
6
FRYER EXPLODED VIEWS
Fryer Exploded View 1 Parts List
ITEM # PART # PART DESCRIPTION
B6665001-C FILTER PAN COVER ASSEMBLY SFD
B6665003-C FILTER PAN COVER ASSEMBLY SFSG18
B6665004-C FILTER PAN COVER ASSEMBLY SFSG14*
B6665007-C FILTER PAN COVER ASSEMBLY SGM1824
B6665008-C FILTER PAN COVER ASSEMBLY SGM24
B6665009-C FILTER PAN COVER ASSEMBLY SGM34
B8033302-C REAR-TEE MANIFOLD WELDMENT SG14/SG18
B8033304-C REAR-TEE MANIFOLD WELDMENT SGM1824/SGM24
B8033305-C REAR-TEE MANIFOLD WELDMENT SGM24-2
B8033306-C REAR-TEE MANIFOLD WELDMENT SGM1824/SGM34
B8033307-C REAR-TEE MANIFOLD WELDMENT SGM24/SGM34
B8033308-C REAR-TEE MANIFOLD WELDMENT SGM34-2
B8033802-C REAR-TEE MANIFOLD WELDMENT SG14-2/SG18
B8033803-C REAR-TEE MANIFOLD WELDMENT SG14/SG18/SG14,SG18/SG14/SG18
B8033804-C REAR-TEE MANIFOLD WELDMENT SG14/SG18/SG18
B8034102-C REAR-TEE MANIFOLD WELDMENT SG14-3/SG18
B8034103-C REAR-TEE MANIFOLD WELDMENT SG14-2/SG18/SG14
B8034104-C REAR-TEE MANIFOLD WELDMENT SG14-2/SG18-2
B8034105-C REAR-TEE MANIFOLD WELDMENT SG18/SG14/SG18/SG14
B8034106-C REAR-TEE MANIFOLD WELDMENT SG14/SG18-2/SG14
B8034107-C REAR-TEE MANIFOLD WELDMENT SG18/SG14-2/SG18
B8034108-C REAR-TEE MANIFOLD WELDMENT SG18-3/SG14
B8034109-C REAR-TEE MANIFOLD WELDMENT SG18-2/SG14/SG18
B8034111-C REAR-TEE MANIFOLD WELDMENT SG14-2/SGBNB14/SG14-2 (CRACKER BARREL)
B8034112-C REAR-TEE MANIFOLD WELDMENT SGM1824-3/SGM34
B8039201 REAR-TEE MANIFOLD WELDMENT SG14-2
B8039202 REAR-TEE MANIFOLD WELDMENT SG18-2
B8039203 REAR-TEE MANIFOLD WELDMENT SG14-3
B8039204 REAR-TEE MANIFOLD WELDMENT SG18-3
B8039205 REAR-TEE MANIFOLD WELDMENT SG14-4
B8039206 REAR-TEE MANIFOLD WELDMENT SG18-4
60133203 GAS RESTRICTOR FITTING UNREGULATED 3/4 M/F NPT 4.83mm SG14
60133204 GAS RESTRICTOR FITTING UNREGULATED 3/4 M/F NPT 5.18mm SG14R
60133205 GAS RESTRICTOR FITTING UNREGULATED 3/4 M/F NPT 5.61mm SG18
4 P0007300 SCREW 8-32 X 1/4 INDEN TED HEX HEAD ZN
5 P6071516 CHROME HANDLE 3"
6 P7036206 BUSHING REDUCER 1-1/4 MNPT X 1 FNPT HEX BLACK IRON (366,000 BTU MAX)
7 P7036904 UNION 3/4 NPT BLACK IRON
P7037400 PIPE NIPPLE CLOSE 1 NPT SCHED-40 BLACK STEEL CE
P7037450 PIPE NIPPLE CLOSE 1-1/4 NPT SCHED-40 BLACK STEEL CE
9 PP10023 SCREW 10-24 X 3/8 SELF TAPPING
10 PP10479 PLUG 1-1/4 NPT HEX HEAD BLACK IRON
PP10964 GAS SUPPLY ADAPTOR FITTING 1-1/4 BSPT X 1-1/4 FNPT CE
PP10966 GAS SUPPLY ADAPTOR FITTING 1 BSPT X 1 FNPT CE
PP11292 GAS SUPPLY ADAPTOR FITTING 3/4 BSPT X 3/4 FNPT CE
1
8
11
3
2
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
7
Fryer Exploded View 1
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
8
Fryer Exploded View 2 Parts List
ITEM # PART # PART DESCRIPTION
1 B6676001 FILTER PICKUP BLOCK WELDMENT (NOT USED PRIOR TO 01/13/04)
2 A1844001-C CABINET CABLE RETAINER
A3667904-C FRONT PANEL BOTTOM RAIL SG18,SG18F
A3667906-C FRONT PANEL BOTTOM RAIL SG14,SG14R,SG14T
A3676302-C FRONT PANEL BOTTOM RAIL SGM1824
A3676304-C FRONT PANEL BOTTOM RAIL SGM24
A3676306-C FRONT PANEL BOTTOM RAIL SGM34
4 A7027602 FILTER PICKUP BLOCK (PRIOR TO 01/13/04)
5 A7027902 FILTER PUMP PLATE MOUNTING ROD
6 A7028401-C FILTER PUMP PLATE MOUNTING ROD HOLDER
7 60068301 O-RING VITON NEWMAN #318-3107 (NOT USED PRIOR TO 01/13/04)
8 60128403 POWER CORD JUMPER 3-WIRE 16A 34" IEC-320 MALE/FEMALE
9 60128501 POWER CORD 3-WIRE 16A 96" IEC-320 FEMALE, NEMA 5-15P MALE
10 60130501 STRAIN RELIEF LAY-IN
11 P7037360 PIPE NIPPLE 3/4 NPT SCHED-40 X 4-1/2 LG BLACK IRON (PRIOR TO 01/13/04)
12 PP10023 SCREW 10-24 X 3/8 SELF TAPPING
13 60129301 SCREW 10-24 X 5/8 HEX HEAD MACHINE WITH PATCH-LOC ZN
14 PP11104 O-RING VITON NEWMAN #120-3107 (PRIOR TO 01/13/04)
3
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
9
Fryer Exploded View 2
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
10
A) TANK & FLUE
Tank & Flue Drawing A Parts List
ITEM # PART # PART DESCRIPTION
B3321501-C TANK WELDMENT STANDARD SST SG14
B3321601-C TANK WELDMENT STANDARD SST SG14R
B3321701-C TANK WELDMENT STANDARD SST SG14T
B3321801-C TANK WELDMENT STANDARD SST SG18
B3322501-C TANK WELDMENT MODULAR SST SG14
B3322601-C TANK WELDMENT MODULAR SST SG14R
B3322701-C TANK WELDMENT MODULAR SST SG14T
B3322801-C TANK WELDMENT MODULAR SST SG18
B3322901-C TANK WELDMENT STANDARD CRS SG14
B3323001-C TANK WELDMENT STANDARD CRS SG14R
B3323101-C TANK WELDMENT STANDARD CRS SG18
B3323801-C TANK WELDMENT STANDARD CRS SG14T
B3324701-C TANK WELDMENT SGC
B3324801-C TANK WELDMENT SG18F
B3328001-C TANK WELDMENT SGM1824
B3328101-C TANK WELDMENT SGM24
B3328201-C TANK WELDMENT SGM34
B3503101 FLUE WELDMENT SG14
B3503201 FLUE WELDMENT SG14R
B3503301 FLUE WELDMENT SG14T
B3503401 FLUE WELDMENT SG18
B3504101 FLUE WELDMENT LONG SGC (BEFORE 5/03)
B3504301 FLUE WELDMENT SG18F
B3504401 FLUE WELDMENT SHORT FLUE SGC
B3504901 FLUE WELDMENT SGM1824
B3504902 FLUE WELDMENT SGM24
B3504903 FLUE WELDMENT SGM34
60131001 BALL VALVE 1-1/4 FULL PORT REVERSIBLE LUG LEFT HAND SG14T
60131002 BALL VALVE 1-1/4 FULL PORT REVERSIBLE LUG RIGHT HAND
60131003 BALL VALVE 1-1/4 FULL PORT REVERSIBLE LUG LEFT HAND LOCKING SG14T
60131004 BALL VALVE 1-1/4 FULL PORT REVERSIBLE LUG RIGHT HAND LOCKING
60131005 BALL VALVE 1-1/4 FULL PORT REVERSIBLE LUG RIGHT HAND LOCKING SGM
PP10368 BALL VALVE 1-1/4 FULL PORT STANDARD
PP10962 BALL VALVE 1-1/4 FULL PORT LOCKING STANDARD
A8030407 DRAIN LINE PIPING ADAPTER SG, SGM (NON-FILTER)
A8034301 DRAIN LINE PIPING ADAPTER SG18F
B6700604-C WIRING PROBE SERVICE KIT SG
B6700608-C WIRING PROBE SERVICE KIT (BACK UP THERMOSTAT)
6 B6763001 WIRING RETURN OR HOSE JUMPER 24V SGM
7 A4021001-C DRAIN VALVE INTERLOCK MOUNTING PLATE
8 B5305001 DRAIN VALVE INTERLOCK SENSOR
9 PP10263 PROXIMITY ACTUATOR SWITCH
10 A3525901 FLUE GASKET SG14T
11 P7036726 STEEL TANK PLUG 1/4NPT
60130101 TANK REAR ADAPTER 37.5 FLARE SWIVEL X 1/2NPT
P7036729 STEEL TANK PLUG 1/2NPT
A1406802 CLAMP PROBE THERMISTOR COMPUTER/DIGITAL/SOLID STATE
A1406702 CLAMP HIGH LIMIT THERMOSTAT SG MILLIVOLT
A1406902 CLAMP TEMPERATURE PROBE SG14T I-12/3300/SS THERMOSTAT
A1402102-C CLAMP THERMOSTAT BULB SG14T MILLIVOLT
A1407002 CLAMP HIGH LIMIT SG14T
14 PP10266 SCREW 4-40 X 1/4 ROUND HEAD ZN
15 PP10686 SCREW 6-32 X 1/4 ROUND HEAD PHILLIPS ZN
16 PP11366 SCREW 10-24 X 5/8 PAN HEAD SST THREAD FORMING
17 PP10023 SCREW 10-24 X 3/8 SELF TAPPING
18 P0076100 SCREW 10-24 X 3/4 SELF TAPPING
19 P0092300 NUT HEX 10-24 KEP ZN
20 A3527101-C FLUE DEFLECTOR SGC
13
3
2
1
12
5
4
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
11
Tank & Flue Drawing A
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
12
B) BURNER ASSEMBLY
Burner Assembly Drawing B Parts List B(A)
ITEM # PART # PART DESCRIPTION
1 SEE PARTS LIST B(B) BURNER MANIFOLD WELDMENT
B8042001 SELF-CLEANING BURNER RUNNER TUBE SG14, SG14R
B8042002 SELF-CLEANING BURNER RUNNER TUBE SG18
B8042003 SELF-CLEANING BURNER RUNNER TUBE LEFT-HAND SG14T
B8042004 SELF-CLEANING BURNER RUNNER TUBE RIGHT-HAND SG14T
3 60147801 THERMAL-LIMIT SWITCH WITH MANUAL RESET
A8028401 GASKET BURNER BRACKET SG14R,SGM1824
A8039601 GASKET BURNER BRACKET SGM24
A8039701 GASKET BURNER BRACKET SGM34
3M SUPER 77 MULTIPURPOSE HIGH TACK SPRAY ADHESIVE
(REQUIRED WHEN INSTALLING NEW ITEM #4)
DO NOT SPRAY ADHESIVE ACROSS BURNER FACES
A8027701 BURNER FLAME JUMPER SG14,SG14R,SG18,SG18F,SGC
A8031601 BURNER CROSSOVER SGM1824,SGM24,SGM34
B8034601 BURNER FLAME JUMPER WELDMENT SG14,SG14R,SG18,SG18F
A8031701 BURNER SHIELD NATURAL LEFT-HAND SGM1824
A8034901-C BURNER COLLAR LP FULL LEFT-HAND SGM1824
A8031705 BURNER SHIELD NATURAL LEFT-HAND SGM24
A8034907-C BURNER COLLAR LP FULL LEFT-HAND SGM24
A8031709 BURNER SHIELD NATURAL LEFT-HAND SGM34
A8034911-C BURNER COLLAR LP FULL LEFT-HAND SGM34
A8031703 BURNER SHIELD NATURAL RIGHT-HAND SGM1824
A8034903-C BURNER COLLAR LP FULL RIGHT-HAND SGM1824
A8031707 BURNER SHIELD NATURAL RIGHT-HAND SGM24
A8034909-C BURNER COLLAR LP FULL RIGHT-HAND SGM24
A8031711 BURNER SHIELD NATURAL RIGHT-HAND SGM34
A8034913-C BURNER COLLAR LP FULL RIGHT-HAND SGM34
B8037301-C BURNER SLOTTED-FACE NATURAL
B8037302-C BURNER SLOTTED-FACE LP
BURNER INCONEL 601 WIRE-FACE SCREEN NATURAL SCB & LP
(REPLACES B8030001)
9 60127501 FITTING ADAPTER FLARED 15/16-16 UN-2A X 1/2 FNPT BRASS
10 60129701 FITTING 1/4 MNPT X .344-32 UNS ORIFICE TIP BRASS
11A 60132801 FITTING TEST PRESSURE PLUG 1/8-27 (CE)
11B N/A PLUG 1/8 NPT 3/16 HEX SOCKET STEEL
12 SEE PARTS LIST B(B) ORIFICE TIP
13 PP10023 SCREW 10-24 X 3/8 SELF TAPPING
14 PP10687 SCREW 6-32 X 5/16 TRUSS HEAD PHILLIPS ZN
15 SEE PARTS LIST B(B) BURNER BRACKET
A2036904-C SELF-CLEANING BURNER HIGH-LIMIT BRACKET SG14, SG14R, SG18
A2036902-C SELF-CLEANING BURNER HIGH-LIMIT BRACKET LEFT-HAND SG14T
A2036906-C SELF-CLEANING BURNER HIGH-LIMIT BRACKET RIGHT-HAND SG14T
17 P0075300 SCREW 10-16 X 5/8 HEX HEAD SELF-DRILLING
18 A8039901 BURNER SHROUD SGM34
B8031603 BURNER ASSEMBLY INCONEL 601 WIRE-FACE SG14
B8031702 BURNER ASSEMBLY SLOT FACE NATURAL SG14R
B8031705 BURNER ASSEMBLY INCONEL 601 WIRE-FACE SG14R
B8031803 BURNER ASSEMBLY INCONEL 601 WIRE-FACE SG18
B8033002 BURNER ASSEMBLY INCONEL 601 WIRE-FACE SG14T
B8042602 BURNER ASSEMBLY INCONEL 601 WIRE-FACE SGM1824
B8042702 BURNER ASSEMBLY INCONEL 601 WIRE-FACE SGM24
B8042802 BURNER ASSEMBLY INCONEL 601 WIRE-FACE SGM34
B8041901
19
NOT SHOWN
(INCLUDES
ITEMS: 1, 5-
10, 11B, 13,
15, & 18)
16
4
8
2
5
6
7
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
13
Burner Assembly Drawing B
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
14
Burner Assembly Drawing B Parts List B(B)
ITEM # PART # PART DESCRIPTION
B8029701 BURNER MANIFOLD WELDMENT SG18F
B8029801 BURNER MANIFOLD WELDMENT SG18
B8029901 BURNER MANIFOLD ASSEMBLY SG14T
B8035301 BURNER MANIFOLD WELDMENT SGC
B8039101 BURNER MANIFOLD WELDMENT CENTER-TAP SG14, SG14R (REPLACES B8029701)
B8042301 BURNER MANIFOLD WELDMENT SGM1824
B8042401 BURNER MANIFOLD WELDMENT SGM24
B8042501 BURNER MANIFOLD WELDMENT SGM34
A7513701 ORIFICE TIP 1.45mm DIA
P6071309 ORIFICE TIP 1/16 DIA
P6071336 ORIFICE TIP #36 DIA
P6071337 ORIFICE TIP #37 DIA
P6071338 ORIFICE TIP #38 DIA
P6071339 ORIFICE TIP #39 DIA
P6071340 ORIFICE TIP #40 DIA
P6071341 ORIFICE TIP #41 DIA
P6071342 ORIFICE TIP #42 DIA
P6071343 ORIFICE TIP #43 DIA
P6071344 ORIFICE TIP #44 DIA
P6071353 ORIFICE TIP #53 DIA
P6071354 ORIFICE TIP #54 DIA
P6071355 ORIFICE TIP #55 DIA
PP10859 ORFICE TIP 1.51 mm DIA
A8027901 BURNER BRACKET SG14
A8028001 BURNER BRACKET SG14R
A8028101 BURNER BRACKET SG14T
A8028201 BURNER BRACKET SG18
A8033201 BURNER BRACKET SGC
A8033701 BURNER BRACKET SG18F
A8039301 BURNER BRACKET SGM1824
A8039401 BURNER BRACKET SGM24
A8039501 BURNER BRACKET SGM34
15
1
12
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
15
This Page Left Intentionally Blank
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
16
C) GAS TRAIN
Gas Train Drawing C1 Parts List
ITEM# PART# PART DESCRIPTION
1 60125901 TUBE, VENT GAS VALVE
2 60127601 FITTING,ADAPTER FEMALE SWIVEL X 1/2 MPT
A8029001-C PIPING, VALVE SHIELD SG, SGC, SG18F
A8032101-C PIPING, VALVE SHIELD SGM 24V
4 60127401 FITTING, ELBOW MALE FLARE X MPT
5 P0007300 SCREW, 8-32 X 1/4 HEX HEAD SLOTTED ZN
6 P7037092 NIPPL E , BL ACK 1/2 NP T X 1.5
60127501 FITTING, ADAPTER MALE FLARE X 1/2 FPT
60133602 FITTING,GAS RESTRICTOR 1/2"NPT CE 3.25MM (UNREGULATED ONLY)
8 A8030101 PIPING, VALVE SHIELD SG14T
9 A8029105 COUPLING, GAS SUPPLY SHORT SG, MKG (PRIOR TO 2/05: USE A8029103)
10 60128101 VALVE, GAS SUPPLY SHUTOFF
60128014 TUBING, FLEXIBLE WITH FITTINGS 16 GAS SGC, (SG PRIOR TO 2/05)
60128015 TUBING, FLEXIBLE WITH FITTINGS 22 GAS (SG AFTER 2/05)
60128016 TUBING, FLEXIBLE WITH FITTINGS 28 GAS SGM, SG18F
12 P7037090 NIPPLE, BLACK 1/2 NPT CL
13 B8034701 PIPING, GAS INLET MANIFOLD WELDMENT SG14T
14 P7037750 ELBOW, BLACK STREET 90 1/2 NPT
3
11
7
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
17
Gas Train Drawing C1
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
18
Gas Train Drawing C2 Parts List
ITEM# PART# PART DESCRIPTION
60113501-C VALVE, GAS VR8204 24V FAST NAT SG
60113502-C VALVE, GAS VR8204 24V FAST LP SG
60113503-C VALVE, GAS VR8204 24V FAST CE NAT SG
60113504-C VALVE, GAS VR8204 24V FAST CE LP SG
60113505-C VALVE, GAS VR8204 24V FAST CE UNREGULAT ED NAT SG
60148701-C VALVE, GAS VR8304M 24V FAST NAT SGM
60148702-C VALVE, GAS VR8304M 24V FAST LP SGM
60125201-C VALVE, GAS VS820 NAT SG, SGC, SG18F
60125202-C VALVE, GAS VS820 LP SG, SGC, SG18F
60132901-C VALVE, GAS U7000 CE NAT SG, SGC, SG18F
60132902-C VALVE, GAS U7000 CE LP SG, SGC, SG18F
60132903-C VALVE, GAS U7000 CE UNREGULATED SG, SGC, SG18F
4 60132801 FITTING, TEST PRESSURE PLUG
A8035302 PIPING, PILOT BRACKET SG14 SG14R SG18
A8035402 PIPING, PILOT BRACKET SG14T
A8035002 PIPING, PILOT BRACKET WITH TAB SG14 SG14R SG18
A8035102 PIPING, PILOT BRACKET WITH TAB SG14T
7 A8039802 PIPING, PILOT BRACKET MOUNT SGM
60130901 PILOT, INLINE EI NAT 1.5
60130902 PILOT, INLINE EI LP 1.5
60130905 PILOT, INLINE EI NAT 2.98
60130906 PILOT, INLINE EI LP 2.98
60128801 PILOT, REVERSE STANDING NAT SG
60128802 PILOT, REVERSE STANDING LP SG
60119001 TUBE, FLEXIBLE WITHOUT FITTINGS 18 X 1/4 OD SG, SG18F, SGC
60119011 TUBE, FLEXIBLE WITHOUT FITTINGS 18 X 1/4 OD 3/4 STR SGM1824
60119012 TUBE, FLEXIBLE WITHOUT FITTINGS 30 X 1/4 OD 3/4 STR SGM24/34
12 60088001 SCREW, 10-32 X 1/4 HEX HEAD SST
13 60088006 SCREW, 10-32 X 1/2 HEX HEAD SST
14 60125501 THERMOPILE, MILLIVOLT
15 P5047540 THERMOCOUPLE T46 24
16 A8035201 PIPING, PILOT BRACKET ADD-ON SG CE
17 PP11373 NUT, HEX KEP 10-32 ZN
18 60148101 VALVE, SOLENOID 24VAC
19 A8039001 PIPING, TUBING SCB SG
20 P7037797 FITTING, COMPRESSION ELBOW BRASS 1/4TU X 1/8MPT
21 PP10934 FITTING, COMPRESSION BRASS STRAIGHT 1/4TU X 1/8MPT
22 60119010 TUBE, FLEXIBLE WITHOUT FITTINGS 6 X 1/4 OD
2908-0940501 ORIFICE, PILOT RUNNER TUBE #52 NAT SG14, SG14R, SG14T
2908-0940502 ORIFICE, PILOT RUNNER TUBE #68 LP SG
2908-0940503 ORIFICE, PILOT RUNNER TUBE #50 NAT SG18
24 A20 367 01 -C CONTROL BOX, PILOT ORIFICE RETAINING BRACKET SG14
25 A20 368 01 -C CONTROL BOX, PILOT ORIFICE RETAINING BRACKET SG14T LH
26 A20 368 02-C CONTROL BOX, PILOT ORIFICE RETAINING BRACKET SG14T RH
27 P P1 002 3 SCREW, 10-24 X 3/8 SELF TAPPING
28A B6783401
WIRING, IGNITION CABLE WITH GROUND WRAP 20" SG*
28B B6783402
WIRING, IGNITION CABLE WITH GROUND WRAP 23" SGM*
11
23
6
8
9
10
1
2
3
5
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
19
Gas Train Drawing C2
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
20
D) GAS CONVERSION KITS
Gas Conversion Kits Quick Reference
COVERING ALL COUNTRIES EXCEPT:
BURNER TYPE
NAT TO LP PARTS LIST LP TO NAT PARTS LIST NAT TO LP PARTS LIST LP TO NAT PARTS LIST
SG14 B7510084-C D2 B7510081-C D2 B8043205-C D1 B8043209-C D1
SG14R B7510085-C D2 B7510082-C D2 B8043206-C D1 B8043210-C D1
SG14T B7510086-C D2 B7510083-C D2 B8043207-C D1 B8043211-C D1
SG18 B7510084-C D2 B7510081-C D2 B8043208-C D1 B8043212-C D1
SG14 DI B7510084-C D2 B7510081-C D2 N/A N/A
SG14R DI B7510085-C D2 B7510082-C D2 B8043206-C D1 B8043210-C D1
SG14T DI B7510086-C D2 B7510083-C D2 N/A N/A
SG18DI B7510084-C D2 B7510081-C D2 N/A N/A
SGC SHORT FLUE N/A N/A B8043229-C D3 B8043230-C D3
SGC TALL FLUE
(PRIOR TO 5/03)
SG18F N/A N/A B8043205-C D1 B8043209-C D1
BURNER TYPE
NAT TO LP PARTS LIST LP TO NAT PARTS LIST NAT TO LP PARTS LIST LP TO NAT PARTS LIST
SG14 B7510090-C D2 B7510087-C D2 B8043213-C D1 B8043217-C D1
SG14R B7510091-C D2 B7510088-C D2 B8043214-C D1 B8043218-C D1
SG14T B7510092-C D2 B7510089-C D2 B8043215-C D1 B8043219-C D1
SG18 B7510090-C D2 B7510087-C D2 B8043216-C D1 B8043220-C D1
SGM1824 B8043232-C D4 B8043233-C D4 N/A N/A
SGM24 B8043234-C D4 B8043235-C D4 N/A N/A
SGM34 B8043236-C D4 B8043237-C D4 N/A N/A
MILLIVOLT SYSTEM, HONEYWELL VS820 GAS VALVE
SLOT FACED BURNERS
24VAC SYSTEM, HONEYWELL VR8204 GAS VALVE (VR8304M MEGA)
WIRE FACED OR SCB BURNERS
WIRE FACED BURNERS SLOT FACED BURNERS
N/A N/A D3
Turkey, Switzerland, Slovenia, Slavakia, Spain, Romania, Bulgaria, Czech Republic, England, Scotland, Wales, Hungary, Ireland,
Luxembourg, Poland, Portugal, France, Germany, South Korea, Australia, Belgium, Cyprus, Malta, Austria, Denmark, Estonia,
Finland, Greece, Italy, Latvia, Lithuania, Norway, Sweden
B8043229-C D3 B8043231-C
For these countries see parts lists D5, D6, D7, or D8
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
21
Gas Conversion Kits Simple Instructions Drawing D
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
22
Gas Conversion Kits Slot Face Burners Parts List D1
ITEM # MODELS VALVE PART # PART DESCRIPTION QTY
SG14,SG18F
V
S820 B8043205-C GAS CONV KIT SLOT FACED NAT TO LP VS820 SG14
SG14R, SG14RDI
V
S820 B8043206-C GAS CONV KIT SLOT FACED NAT TO LP VS820 SG14R
SG14T
V
S820 B8043207-C GAS CONV KIT SLOT FACED NAT TO LP VS820 SG14T
SG18
V
S820 B8043208-C GAS CONV KIT SLOT FACED NAT TO LP VS820 SG18
SG14
V
R8204 B8043213-C GAS CONV KIT SLOT FACED NAT TO LP VR8204 SG14
SG14R
V
R8204 B8043214-C GAS CONV KIT SLOT FACED NAT TO LP VR8204 SG14R
SG14T
V
R8204 B8043215-C GAS CONV KIT SLOT FACED NAT TO LP VR8204 SG14T
SG18
V
R8204 B8043216-C GAS CONV KIT SLOT FACED NAT TO LP VR8204 SG18
SG14, SG18F VS820/VR8204 P6071353 ORIFICE TIP #53 DIA 4
SG14R, SG14RDI VS820/VR8204 P6071309 ORIFICE TIP 1/16 DIA 4
SG14T VS820/VR8204 A7513701 ORIFICE TIP 1.45mm DIA 4
SG18 VS820/VR8204 P6071353 ORIFICE TIP #53 DIA 5
SG14, SG18F, SG18,
SG14R, SG14RDI
SG14T VS820 60126502 GAS VALVE CONV KIT VS820 NAT TO LP 2
SG14, SG18, SG14R VR8204 PP11141 GAS VALVE CONV KIT VR8204 NAT TO LP 1
SG14T VR8204 PP11141 GAS VALVE CONV KIT VR8204 NAT TO LP 2
SG14, SG18F, SG18,
SG14R, SG14RDI
SG14T VS820/VR8204 P6071665 ORFICE PILOT SPUD LP .016 DIA 2
SG14, SG18F, SG14T
SG14R, SG14RDI, SG18
SG14, SG18F, SG14T,
SG14R, SG14RDI
SG18 VS820/VR8204 B8037302-C BURNER SLOTTED-FACE 304-SST LP 5
ITEM # MODELS VALVE PART # PART DESCRIPTION QTY
SG14,SG18F
V
S820 B8043209-C GAS CONV KIT SLOT FACED LP TO NAT VS820 SG14
SG14R, SG14RDI
V
S820 B8043210-C GAS CONV KIT SLOT FACED LP TO NAT VS820 SG14R
SG14T
V
S820 B8043211-C GAS CONV KIT SLOT FACED LP TO NAT VS820 SG14T
SG18
V
S820 B8043212-C GAS CONV KIT SLOT FACED LP TO NAT VS820 SG18
SG14
V
R8204 B8043217-C GAS CONV KIT SLOT FACED LP TO NAT VR8204 SG14
SG14R
V
R8204 B8043218-C GAS CONV KIT SLOT FACED LP TO NAT VR8204 SG14R
SG14T
V
R8204 B8043219-C GAS CONV KIT SLOT FACED LP TO NAT VR8204 SG14T
SG18
V
R8204 B8043220-C GAS CONV KIT SLOT FACED LP TO NAT VR8204 SG18
SG14, SG18F VS820/VR8204 P6071341 ORIFICE TIP #41 DIA 4
SG14R, SG14RDI VS820/VR8204 P6071338 ORIFICE TIP #38 DIA 4
SG14T VS820/VR8204 P6071343 ORIFI CE TIP #43 DIA 4
SG18 VS820/VR8204 P6071341 ORIFICE TIP #41 DIA 5
SG14, SG18F, SG18,
SG14R, SG14RDI
SG14T VS820 60126501 GAS VALVE CONV KIT VS820 LP TO NAT 2
SG14, SG18, SG14R VR8204 PP11319 GAS VALVE CONV KIT VR8204 LP TO NAT 1
SG14T VR8204 PP11319 GAS VALVE CONV KIT VR8204 LP TO NAT 2
SG14, SG18F, SG18,
SG14R, SG14RDI
SG14T VS820/VR8204 P6071666 ORFICE PILOT SPUD NAT .022 DIA 2
SG14, SG18F, SG14T
SG14R, SG14RDI, SG18
SG14, SG18F, SG14T,
SG14R, SG14RDI
SG18 VS820/VR8204 B8037301-C BURNER SLOTTED-FACE 304-SST NAT 5
BURNER SLOTTED-FACE 304-SST NAT 4
1E
1D VS820/VR8204 PP10426
SLOT FACED BURNERS NATURAL TO LP
1
1E
VS820/VR8204 B8037302-C BURNER SLOTTED-FACE 304-SST LP 4
1A
1B
VS820
1
1D
ORFICE PILOT SPUD LP .016 DIA 1
GAS CONV NOTICE LABEL NAT TO LP 1
VS820/VR8204
1C
VS820/VR8204 P6071665
GAS VALVE CONV KIT VS820 LP TO NAT
1
SLOT FACED BURNERS LP TO NATURAL
1
GAS VALVE CONV KIT VS820 NAT TO LP
1A
1B
VS820 60126501
60126502
1C
VS820/VR8204
1GAS CONV NOTICE LABEL LP TO NATPP10427
VS820/VR8204 P6071666 ORFICE PILOT SPUD NAT .022 DIA 1
B8037301-C
Exploded Parts-SG Gas Models
L20-221 Rev 6 (10/12)
23
Gas Conversion Kits Wire Face Burners P a rts List D2
ITEM # MODELS VALVE PART # PART DESCRIPTION QTY
SG14, SG14DI, SG18, SG18DI
V
S820 B7510084-C GAS CONV KIT NAT TO LP VS820 SG14,SG18
SG14R, SG14RDI
V
S820 B751008 5-C GAS CONV KIT NAT TO LP VS820 SG14R
SG14T, SG14TDI
V
S820 B751008 6-C GAS CONV KIT NAT TO LP VS820 SG14T
SG14, SG18
V
R8204 B7510090-C GAS CONV KIT NAT TO LP VR8204 SG14,SG18
SG14R
V
R8204 B7510091-C GAS CONV KIT NAT TO LP VR8204 SG14R
SG14T
V
R8204 B7510092-C GAS CONV KIT NAT TO LP VR8204 SG14T
SG14, SG14DI, SG18, SG18DI VS820/VR8204 P6071353 ORIFICE TIP #53 DIA 5
SG14R, SG14RDI VS820/VR8204 P6071309 ORIFICE TIP 1/16 DIA 4
SG14T, SG14TDI VS820/VR8204 A7513701 ORIFICE TIP 1.45mm DIA 4
SG14, SG14DI, SG14R,
SG14RDI, SG18, SG18DI
SG14T, SG14TDI VS820 60126502 GAS VALVE CONV KIT VS820 NAT TO LP 2
SG14, SG18, SG14R VR8204 PP11141 GAS VALVE CONV KIT VR8204 NAT TO LP 1
SG14T VR8204 PP11141 GAS VALVE CONV KIT VR8204 NAT TO LP 2
SG14, SG14DI, SG14R,
SG14RDI, SG18, SG18DI
SG14T, SG14TDI VS820/VR8204 P6071665 ORFICE PILOT SPUD LP .016 DIA 2
SG14, SG14DI, SG14R, SG14T
SG14TDI, SG14RDI, SG18, SG18DI
ITEM # MODELS VALVE PART # PART DESCRIPTION QTY
SG14, SG14DI, SG18, SG18DI VS820 B7510081-C GAS CONV KIT LP TO NAT VS820 SG14,SG18
SG14R, SG14RDI VS820 B7510082-C GAS CONV KIT LP TO NAT VS820 SG14R
SG14T, SG14TDI VS820 B7510083-C GAS CONV KIT LP TO NAT VS820 SG14T
SG14, SG18 VR8204 B7510087-C GAS CONV KIT LP TO NAT VR8204 SG14,SG18
SG14R VR8204 B7510088-C GAS CONV KIT LP TO NAT VR8204 SG14R
SG14T VR8204 B7510089-C GAS CONV KIT LP TO NAT VR8204 SG14T
SG14, SG14DI, SG18, SG18DI VS820/VR8204 P6071341 ORIFICE TIP #41 DIA 5
SG14R, SG14RDI VS820/VR8204 P6071338 ORIFICE TIP #38 DIA 4
SG14T, SG14TDI VS820/VR8204 P6071343 ORIFICE TIP #43 DIA 4
SG14, SG14DI, SG14R,
SG14RDI, SG18, SG18DI
SG14T, SG14TDI VS820 60126501 GAS VALVE CONV KIT VS820 LP TO NAT 2
SG14, SG18, SG14R VR8204 PP11319 GAS VALVE CONV KIT VR8204 LP TO NAT 1
SG14T VR8204 PP11319 GAS VALVE CONV KIT VR8204 LP TO NAT 2
SG14, SG14DI, SG14R,
SG14RDI, SG18, SG18DI
SG14T, SG14TDI VS820/VR8204 P6071666 ORFICE PILOT SPUD NAT .022 DIA 2
SG14, SG14DI, SG14R, SG14T
SG14TDI, SG14RDI, SG18, SG18DI
1
1B
VS820 60126502 GAS VALVE CONV KIT VS820 NAT TO LP 1
1D VS820/VR8204 PP10426 GAS CONV NOTICE LABEL NAT TO LP
1
1GAS VALVE CONV KIT VS820 LP TO NAT60126501
VS820/VR8204
VS820
PP10427 GAS CONV NOTICE LABEL LP TO NAT
VS820/VR8204 P6071666 ORFICE PILOT SPUD NAT .022 DIA 1
1A
1C
1D
1B
WIRE FACED OR SCB BURNERS LP TO NATURAL
1
WIRE FACED OR SCB BURNERS NATURAL TO LP
1
1A
1C
VS820/VR8204 P6071665 ORFICE PILOT SPUD LP .016 DIA 1
Loading...