IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain this manual for the life of the equipment:
Model #: ___________________________
Serial #: ___________________________
Date Purchased: ____________________
Exploded Parts Manual
SG14, SG14T, SG18, SG14R, SGC, SG18F, SGM1824,
SGM24, SGM34 Gas Fryer Models
Built after 11/1999
L20-221 Rev 4 (06/06) |
ENGLISH
Exploded Parts-SG Gas Models
Post in a prominent location the instructions to be followed in the event that an operator smells gas. Obtain this information from your local gas supplier.
WARNING
DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
WARNING
Improper installation, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this appliance.
WARNING
Installation, maintenance and repairs should be performed by a Pitco Authorized Service and Parts (ASAP) company technician or other qualified personnel. Installation, maintenance or repairs by unauthorized or unqualified personnel will void the warranty.
WARNING
Installation and all connections must be made according to national and local regulations and codes in force.
WARNING
During the warranty period if a customer elects to use a nonoriginal part or modifies an original part purchased from Pitco and/or its Authorized Service and Parts (ASAP) companies, this warranty will be void. In addition, Pitco and its affiliates will not be liable for any claims, damages or expenses incurred by the customer which arises directly or indirectly, in whole or in part, due to the installation of any modified part and/or received from an unauthorized service center.
WARNING
This appliance, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.2, as applicable.
WARNING
Adequate means must be provided to LIMIT the movement or this appliance without depending on the gas or electrical cord connection. Single appliances equipped with legs must be stabilized by installing anchor straps. All appliances equipped with casters must be stabilized by installing restraining chains.
WARNING
An appliance equipped with casters and a flexible gas line must be connected to the gas supply with a quick disconnect device. This quick disconnect must comply with ANSI Z24.41.
WARNING
DO NOT alter or remove structural material on the appliance to accommodate placement under a ventilation hood.
WARNING
This appliance is intended for professional use only and should be operated by fully trained and qualified personnel.
WARNING
If the appliance is equipped with a power cord and it is damaged, it must be replaced by a Pitco Authorized Service and Parts (ASAP) company technician, or a similarly qualified person in order to avoid a hazard.
WARNING
The power supply must be disconnected before servicing, maintaining or cleaning this appliance.
WARNING
The appliance is NOT jet stream approved. DO NOT clean the appliance with a water jet.
WARNING
DO NOT attempt to move this appliance or transfer hot liquids from one container to another when the unit is at operating temperature or filled with hot liquids. Serious personal injury could result if skin comes in contact with the hot surfaces or liquids.
WARNING
DO NOT sit or stand on this appliance. The appliance’s front panel, tank, splash back, tank cover, workshelf, drain board is not a step. Serious injury could result from slipping, falling or contact with hot liquids.
WARNING
NEVER use the appliance as a step for cleaning or accessing the ventilation hood. Serious injury could result from slips, trips or from contacting hot liquids.
WARNING
The oil/shortening level should NOT fall below the minimum indicated level line at any time. The use of old shortening can be dangerous as it will have a reduced flash point and be more prone to surge boiling.
WARNING
The particles, crumbs and cracklings from the crumb tray/catch (if supplied) in a filtering system must be emptied into a fireproof container at the end of the frying operation each day. Some food particles can spontaneously combust into flames if left soaking in certain oil/shortening materials.
WARNING
Completely shut the appliance down when shortening/oil is being drained from the appliance. This will prevent the appliance from heating up during the draining and filling process. Serious injury can occur.
WARNING
This appliance is intended for indoor use only.
WARNING
DO NOT operate appliance unless all panels and access covers are attached correctly.
WARNING
It is recommended that this appliance be inspected by a qualified service technician for proper performance and operation on a yearly basis.
WARNING
There is an open flame inside this appliance. The unit may get hot enough to set nearby materials on fire. Keep the area around the appliance free from combustibles.
WARNING
DO NOT supply the appliance with a gas that is not indicated on the data plate. If you need to convert the appliance to another type of fuel, contact your dealer.
WARNING
DO NOT use an open flame to check for gas leaks!
WARNING
If gas flow to appliance is interrupted, or pilots extinguish, wait 5 minutes before attempting to relight the pilot to allow any residual gas in appliance to dissipate.
WARNING
Ensure that the appliance can get enough air to keep the flame burning correctly. If the flame is starved for air, it can give off a dangerous carbon monoxide gas. Carbon monoxide is a clear odorless gas that can cause suffocation.
2 |
L20-221 Rev 4 (06/06) |
Exploded Parts-SG Gas Models
This Page Left Intentionally Blank
L20-221 Rev 4 (06/06) |
3 |
Exploded Parts-SG Gas Models |
|
TABLE OF CONTENTS |
|
FRYER EXPLODED VIEWS ........................................................................................................................... |
6 |
FRYER EXPLODED VIEW 1 PARTS LIST ........................................................................................................................................................................... |
6 |
FRYER EXPLODED VIEW 1 ............................................................................................................................................................................................. |
7 |
FRYER EXPLODED VIEW 2 PARTS LIST ........................................................................................................................................................................... |
8 |
FRYER EXPLODED VIEW 2 ............................................................................................................................................................................................. |
9 |
A) TANK & FLUE.......................................................................................................................................... |
10 |
TANK & FLUE DRAWING A PARTS LIST ......................................................................................................................................................................... |
10 |
TANK & FLUE DRAWING A ........................................................................................................................................................................................... |
11 |
B) BURNER ASSEMBLY.............................................................................................................................. |
12 |
BURNER ASSEMBLY DRAWING B PARTS LIST B(A) ........................................................................................................................................................ |
12 |
BURNER ASSEMBLY DRAWING B .................................................................................................................................................................................. |
13 |
BURNER ASSEMBLY DRAWING B PARTS LIST B(B) ........................................................................................................................................................ |
14 |
C) GAS TRAIN .............................................................................................................................................. |
15 |
GAS TRAIN DRAWING C1 PARTS LIST........................................................................................................................................................................... |
16 |
GAS TRAIN DRAWING C1............................................................................................................................................................................................. |
17 |
GAS TRAIN DRAWING C2 PARTS LIST........................................................................................................................................................................... |
18 |
GAS TRAIN DRAWING C2............................................................................................................................................................................................. |
19 |
D) GAS CONVERSION KITS ........................................................................................................................ |
20 |
GAS CONVERSION KITS QUICK REFERENCE.................................................................................................................................................................. |
20 |
GAS CONVERSION KITS SIMPLE INSTRUCTIONS DRAWING D .......................................................................................................................................... |
21 |
GAS CONVERSION KITS SLOT FACE BURNERS PARTS LIST D1 ....................................................................................................................................... |
22 |
GAS CONVERSION KITS WIRE FACE BURNERS PARTS LIST D2....................................................................................................................................... |
23 |
GAS CONVERSION KITS SGC PARTS LIST D3 ............................................................................................................................................................... |
24 |
GAS CONVERSION KITS SGM PARTS LIST D4............................................................................................................................................................... |
25 |
GAS CONVERSION KITS SLOT FACE BURNERS (CE) PARTS LIST D5............................................................................................................................... |
26 |
GAS CONVERSION KITS WIRE FACE BURNERS (CE AND AUSTRALIA) PARTS LIST D6 ...................................................................................................... |
27 |
GAS CONVERSION KITS SGC (CE) PARTS LIST D7....................................................................................................................................................... |
28 |
GAS CONVERSION KITS SGM (CE) PARTS LIST D8 ...................................................................................................................................................... |
29 |
E) FRYER CABINET ..................................................................................................................................... |
30 |
MODULAR CABINET DRAWING E1 PARTS LIST E1(A)..................................................................................................................................................... |
30 |
MODULAR CABINET DRAWING E1................................................................................................................................................................................. |
31 |
MODULAR CABINET DRAWING E1 PARTS LIST E1(B)..................................................................................................................................................... |
32 |
MODULAR CABINET DRAWING E1 PARTS LIST E1(C)..................................................................................................................................................... |
33 |
STANDARD CABINET DRAWING E2 PARTS LIST ............................................................................................................................................................. |
34 |
STANDARD CABINET DRAWING E2 ............................................................................................................................................................................... |
35 |
F) ENTRANCE BOX ..................................................................................................................................... |
36 |
ENTRANCE BOX DRAWING F PARTS LIST ...................................................................................................................................................................... |
36 |
ENTRANCE BOX DRAWING F ........................................................................................................................................................................................ |
37 |
G) CONTROL BOX ....................................................................................................................................... |
38 |
CONTROL BOX PRE 8/00 DRAWING G1 PARTS LIST ...................................................................................................................................................... |
38 |
CONTROL BOX PRE 8/00 DRAWING G1 ........................................................................................................................................................................ |
39 |
CONTROL BOX POST 8/00 DRAWING G2 PARTS LIST .................................................................................................................................................... |
40 |
CONTROL BOX POST 8/00 DRAWING G2 ...................................................................................................................................................................... |
41 |
H) SMALL ASSEMBLIES ............................................................................................................................. |
42 |
SMALL ASSEMBLIES DRAWING H PARTS LIST................................................................................................................................................................ |
42 |
SMALL ASSEMBLIES DRAWING H.................................................................................................................................................................................. |
43 |
I) DRAIN LINE............................................................................................................................................... |
44 |
DRAIN LINE DRAWING I PARTS LIST.............................................................................................................................................................................. |
44 |
DRAIN LINE DRAWING I................................................................................................................................................................................................ |
45 |
J) FILTER PAN ............................................................................................................................................. |
46 |
FILTER PAN DRAWING J PARTS LIST ............................................................................................................................................................................ |
46 |
FILTER PAN DRAWING J .............................................................................................................................................................................................. |
47 |
K) WASTE OIL MANAGEMENT ................................................................................................................... |
48 |
WASTE OIL MANAGEMENT DRAWING K PARTS LIST....................................................................................................................................................... |
48 |
WASTE OIL MANAGEMENT DRAWING K......................................................................................................................................................................... |
49 |
4 |
L20-221 Rev 4 (06/06) |
|
Exploded Parts-SG Gas Models |
L) PUMP ASSEMBLY ................................................................................................................................... |
50 |
PUMP ASSEMBLY PRE 3/04 DRAWING L1 PARTS LIST ................................................................................................................................................... |
50 |
PUMP ASSEMBLY PRE 3/04 DRAWING L1 ..................................................................................................................................................................... |
51 |
PUMP ASSEMBLY POST 3/04 DRAWING L2 PARTS LIST ................................................................................................................................................. |
52 |
PUMP ASSEMBLY POST 3/04 DRAWING L2 ................................................................................................................................................................... |
53 |
PUMP ASSEMBLY SFSG DRAWING L3 PARTS LIST........................................................................................................................................................ |
54 |
PUMP ASSEMBLY SFSG DRAWING L3.......................................................................................................................................................................... |
55 |
M) PUMP BOX .............................................................................................................................................. |
56 |
PUMP BOX DRAWING M PARTS LIST ............................................................................................................................................................................ |
56 |
PUMP BOX DRAWING M............................................................................................................................................................................................... |
57 |
N) RETURN LINE .......................................................................................................................................... |
58 |
RETURN LINE DRAWING N PARTS LIST ......................................................................................................................................................................... |
58 |
RETURN LINE DRAWING N ........................................................................................................................................................................................... |
59 |
O) FLUSH HOSE ASSEMBLY ...................................................................................................................... |
60 |
FLUSH HOSE ASSEMBLY DRAWING O PARTS LIST ......................................................................................................................................................... |
60 |
FLUSH HOSE ASSEMBLY DRAWING O ........................................................................................................................................................................... |
61 |
P) FLUSH HOSE (HOSE) ASSEMBLY ......................................................................................................... |
62 |
FLUSH HOSE (HOSE) ASSEMBLY DRAWING P PARTS LIST ............................................................................................................................................. |
62 |
FLUSH HOSE (HOSE) ASSEMBLY DRAWING P ............................................................................................................................................................... |
63 |
Q) BASKET LIFT........................................................................................................................................... |
64 |
BASKET LIFT DRAWING Q PARTS LIST .......................................................................................................................................................................... |
64 |
BASKET LIFT DRAWING Q ............................................................................................................................................................................................ |
65 |
R) BASKET LIFT COMPONENTS................................................................................................................. |
66 |
BASKET LIFT COMPONENTS DRAWING R PARTS LIST .................................................................................................................................................... |
66 |
BASKET LIFT COMPONENTS DRAWING R ...................................................................................................................................................................... |
67 |
S) ACCESSORIES ........................................................................................................................................ |
68 |
ACCESSORIES DRAWING S PARTS LIST S(A) ................................................................................................................................................................ |
68 |
ACCESSORIES DRAWING S .......................................................................................................................................................................................... |
69 |
ACCESSORIES DRAWING S PARTS LIST S(B) ................................................................................................................................................................ |
70 |
T) BNB .......................................................................................................................................................... |
72 |
BNB DRAWING T PARTS LIST ...................................................................................................................................................................................... |
72 |
BNB DRAWING T ........................................................................................................................................................................................................ |
73 |
U) DROP INS................................................................................................................................................. |
74 |
DROP INS DRAWING U PARTS LIST .............................................................................................................................................................................. |
74 |
DROP INS DRAWING U ................................................................................................................................................................................................ |
75 |
L20-221 Rev 4 (06/06) |
5 |
Exploded Parts-SG Gas Models
FRYER EXPLODED VIEWS
|
|
Fryer Exploded View 1 Parts List |
|
|
|
|
|
ITEM # |
PART # |
PART DESCRIPTION |
|
|
B6665001-C |
FILTER PAN COVER ASSEMBLY SFD |
|
|
B6665003-C |
FILTER PAN COVER ASSEMBLY SFSG18 |
|
1 |
B6665004-C |
FILTER PAN COVER ASSEMBLY SFSG14* |
|
B6665007-C |
FILTER PAN COVER ASSEMBLY SGM1824 |
||
|
|||
|
B6665008-C |
FILTER PAN COVER ASSEMBLY SGM24 |
|
|
B6665009-C |
FILTER PAN COVER ASSEMBLY SGM34 |
|
|
B8033302-C |
REAR-TEE MANIFOLD WELDMENT SG14/SG18 |
|
|
B8033304-C |
REAR-TEE MANIFOLD WELDMENT SGM1824/SGM24 |
|
|
B8033305-C |
REAR-TEE MANIFOLD WELDMENT SGM24-2 |
|
|
B8033306-C |
REAR-TEE MANIFOLD WELDMENT SGM1824/SGM34 |
|
|
B8033307-C |
REAR-TEE MANIFOLD WELDMENT SGM24/SGM34 |
|
|
B8033308-C |
REAR-TEE MANIFOLD WELDMENT SGM34-2 |
|
|
B8033802-C |
REAR-TEE MANIFOLD WELDMENT SG14-2/SG18 |
|
|
B8033803-C |
REAR-TEE MANIFOLD WELDMENT SG14/SG18/SG14,SG18/SG14/SG18 |
|
|
B8033804-C |
REAR-TEE MANIFOLD WELDMENT SG14/SG18/SG18 |
|
|
B8034102-C |
REAR-TEE MANIFOLD WELDMENT SG14-3/SG18 |
|
|
B8034103-C |
REAR-TEE MANIFOLD WELDMENT SG14-2/SG18/SG14 |
|
|
B8034104-C |
REAR-TEE MANIFOLD WELDMENT SG14-2/SG18-2 |
|
2 |
B8034105-C |
REAR-TEE MANIFOLD WELDMENT SG18/SG14/SG18/SG14 |
|
|
B8034106-C |
REAR-TEE MANIFOLD WELDMENT SG14/SG18-2/SG14 |
|
|
B8034107-C |
REAR-TEE MANIFOLD WELDMENT SG18/SG14-2/SG18 |
|
|
B8034108-C |
REAR-TEE MANIFOLD WELDMENT SG18-3/SG14 |
|
|
B8034109-C |
REAR-TEE MANIFOLD WELDMENT SG18-2/SG14/SG18 |
|
|
B8034111-C |
REAR-TEE MANIFOLD WELDMENT SG14-2/SGBNB14/SG14-2 (CRACKER BARREL) |
|
|
B8034112-C |
REAR-TEE MANIFOLD WELDMENT SGM1824-3/SGM34 |
|
|
B8039201 |
REAR-TEE MANIFOLD WELDMENT SG14-2 |
|
|
B8039202 |
REAR-TEE MANIFOLD WELDMENT SG18-2 |
|
|
B8039203 |
REAR-TEE MANIFOLD WELDMENT SG14-3 |
|
|
B8039204 |
REAR-TEE MANIFOLD WELDMENT SG18-3 |
|
|
B8039205 |
REAR-TEE MANIFOLD WELDMENT SG14-4 |
|
|
B8039206 |
REAR-TEE MANIFOLD WELDMENT SG18-4 |
|
|
60133203 |
GAS RESTRICTOR FITTING UNREGULATED 3/4 M/F NPT 4.83mm SG14 |
|
3 |
60133204 |
GAS RESTRICTOR FITTING UNREGULATED 3/4 M/F NPT 5.18mm SG14R |
|
|
60133205 |
GAS RESTRICTOR FITTING UNREGULATED 3/4 M/F NPT 5.61mm SG18 |
|
4 |
P0007300 |
SCREW 8-32 X 1/4 INDENTED HEX HEAD ZN |
|
5 |
P6071516 |
CHROME HANDLE 3" |
|
6 |
P7036206 |
BUSHING REDUCER 1-1/4 MNPT X 1 FNPT HEX BLACK IRON (366,000 BTU MAX) |
|
7 |
P7036904 |
UNION 3/4 NPT BLACK IRON |
|
8 |
P7037400 |
PIPE NIPPLE CLOSE 1 NPT SCHED-40 BLACK STEEL CE |
|
P7037450 |
PIPE NIPPLE CLOSE 1-1/4 NPT SCHED-40 BLACK STEEL CE |
||
|
|||
9 |
PP10023 |
SCREW 10-24 X 3/8 SELF TAPPING |
|
10 |
PP10479 |
PLUG 1-1/4 NPT HEX HEAD BLACK IRON |
|
|
PP10964 |
GAS SUPPLY ADAPTOR FITTING 1-1/4 BSPT X 1-1/4 FNPT CE |
|
11 |
PP10966 |
GAS SUPPLY ADAPTOR FITTING 1 BSPT X 1 FNPT CE |
|
|
PP11292 |
GAS SUPPLY ADAPTOR FITTING 3/4 BSPT X 3/4 FNPT CE |
6 |
L20-221 Rev 4 (06/06) |
Exploded Parts-SG Gas Models
Fryer Exploded View 1
L20-221 Rev 4 (06/06) |
7 |
Exploded Parts-SG Gas Models
|
|
Fryer Exploded View 2 Parts List |
|
|
|
ITEM # |
PART # |
PART DESCRIPTION |
1 |
B6676001 |
FILTER PICKUP BLOCK WELDMENT (NOT USED PRIOR TO 01/13/04) |
2 |
A1844001-C |
CABINET CABLE RETAINER |
|
A3667904-C |
FRONT PANEL BOTTOM RAIL SG18,SG18F |
|
A3667906-C |
FRONT PANEL BOTTOM RAIL SG14,SG14R,SG14T |
3 |
A3676302-C |
FRONT PANEL BOTTOM RAIL SGM1824 |
|
A3676304-C |
FRONT PANEL BOTTOM RAIL SGM24 |
|
A3676306-C |
FRONT PANEL BOTTOM RAIL SGM34 |
4 |
A7027602 |
FILTER PICKUP BLOCK (PRIOR TO 01/13/04) |
5 |
A7027902 |
FILTER PUMP PLATE MOUNTING ROD |
6 |
A7028401-C |
FILTER PUMP PLATE MOUNTING ROD HOLDER |
7 |
60068301 |
O-RING VITON NEWMAN #318-3107 (NOT USED PRIOR TO 01/13/04) |
8 |
60128403 |
POWER CORD JUMPER 3-WIRE 16A 34" IEC-320 MALE/FEMALE |
9 |
60128501 |
POWER CORD 3-WIRE 16A 96" IEC-320 FEMALE, NEMA 5-15P MALE |
10 |
60130501 |
STRAIN RELIEF LAY-IN |
11 |
P7037360 |
PIPE NIPPLE 3/4 NPT SCHED-40 X 4-1/2 LG BLACK IRON (PRIOR TO 01/13/04) |
12 |
PP10023 |
SCREW 10-24 X 3/8 SELF TAPPING |
13 |
60129301 |
SCREW 10-24 X 5/8 HEX HEAD MACHINE WITH PATCH-LOC ZN |
14 |
PP11104 |
O-RING VITON NEWMAN #120-3107 (PRIOR TO 01/13/04) |
8 |
L20-221 Rev 4 (06/06) |
Exploded Parts-SG Gas Models
Fryer Exploded View 2
L20-221 Rev 4 (06/06) |
9 |
Exploded Parts-SG Gas Models
A) TANK & FLUE
|
|
Tank & Flue Drawing A Parts List |
|
|
|
|
|
ITEM # |
PART # |
PART DESCRIPTION |
|
|
B3321501-C |
TANK WELDMENT STANDARD SST SG14 |
|
|
B3321601-C |
TANK WELDMENT STANDARD SST SG14R |
|
|
B3321701-C |
TANK WELDMENT STANDARD SST SG14T |
|
|
B3321801-C |
TANK WELDMENT STANDARD SST SG18 |
|
|
B3322501-C |
TANK WELDMENT MODULAR SST SG14 |
|
|
B3322601-C |
TANK WELDMENT MODULAR SST SG14R |
|
|
B3322701-C |
TANK WELDMENT MODULAR SST SG14T |
|
|
B3322801-C |
TANK WELDMENT MODULAR SST SG18 |
|
1 |
B3322901-C |
TANK WELDMENT STANDARD CRS SG14 |
|
|
B3323001-C |
TANK WELDMENT STANDARD CRS SG14R |
|
|
B3323101-C |
TANK WELDMENT STANDARD CRS SG18 |
|
|
B3323801-C |
TANK WELDMENT STANDARD CRS SG14T |
|
|
B3324701-C |
TANK WELDMENT SGC |
|
|
B3324801-C |
TANK WELDMENT SG18F |
|
|
B3328001-C |
TANK WELDMENT SGM1824 |
|
|
B3328101-C |
TANK WELDMENT SGM24 |
|
|
B3328201-C |
TANK WELDMENT SGM34 |
|
|
B3503101 |
FLUE WELDMENT SG14 |
|
|
B3503201 |
FLUE WELDMENT SG14R |
|
|
B3503301 |
FLUE WELDMENT SG14T |
|
|
B3503401 |
FLUE WELDMENT SG18 |
|
2 |
B3504101 |
FLUE WELDMENT LONG SGC (BEFORE 5/03) |
|
B3504301 |
FLUE WELDMENT SG18F |
||
|
|||
|
B3504401 |
FLUE WELDMENT SHORT FLUE SGC |
|
|
B3504901 |
FLUE WELDMENT SGM1824 |
|
|
B3504902 |
FLUE WELDMENT SGM24 |
|
|
B3504903 |
FLUE WELDMENT SGM34 |
|
|
60131001 |
BALL VALVE 1-1/4 FULL PORT REVERSIBLE LUG LEFT HAND SG14T |
|
|
60131002 |
BALL VALVE 1-1/4 FULL PORT REVERSIBLE LUG RIGHT HAND |
|
|
60131003 |
BALL VALVE 1-1/4 FULL PORT REVERSIBLE LUG LEFT HAND LOCKING SG14T |
|
3 |
60131004 |
BALL VALVE 1-1/4 FULL PORT REVERSIBLE LUG RIGHT HAND LOCKING |
|
|
60131005 |
BALL VALVE 1-1/4 FULL PORT REVERSIBLE LUG RIGHT HAND LOCKING SGM |
|
|
PP10368 |
BALL VALVE 1-1/4 FULL PORT STANDARD |
|
|
PP10962 |
BALL VALVE 1-1/4 FULL PORT LOCKING STANDARD |
|
4 |
A8030407 |
DRAIN LINE PIPING ADAPTER SG, SGM (NON-FILTER) |
|
A8034301 |
DRAIN LINE PIPING ADAPTER SG18F |
||
|
|||
5 |
B6700604-C |
WIRING PROBE SERVICE KIT SG |
|
B6700608-C |
WIRING PROBE SERVICE KIT (BACK UP THERMOSTAT) |
||
|
|||
6 |
B6763001 |
WIRING RETURN OR HOSE JUMPER 24V SGM |
|
7 |
A4021001-C |
DRAIN VALVE INTERLOCK MOUNTING PLATE |
|
8 |
B5305001 |
DRAIN VALVE INTERLOCK SENSOR |
|
9 |
PP10263 |
PROXIMITY ACTUATOR SWITCH |
|
10 |
A3525901 |
FLUE GASKET SG14T |
|
11 |
P7036726 |
STEEL TANK PLUG 1/4NPT |
|
12 |
60130101 |
TANK REAR ADAPTER 37.5 FLARE SWIVEL X 1/2NPT |
|
P7036729 |
STEEL TANK PLUG 1/2NPT |
||
|
|||
|
A1406802 |
CLAMP PROBE THERMISTOR COMPUTER/DIGITAL/SOLID STATE |
|
|
A1406702 |
CLAMP HIGH LIMIT THERMOSTAT SG MILLIVOLT |
|
13 |
A1406902 |
CLAMP TEMPERATURE PROBE SG14T I-12/3300/SS THERMOSTAT |
|
|
A1402102-C |
CLAMP THERMOSTAT BULB SG14T MILLIVOLT |
|
|
A1407002 |
CLAMP HIGH LIMIT SG14T |
|
14 |
PP10266 |
SCREW 4-40 X 1/4 ROUND HEAD ZN |
|
15 |
PP10686 |
SCREW 6-32 X 1/4 ROUND HEAD PHILLIPS ZN |
|
16 |
PP11366 |
SCREW 10-24 X 5/8 PAN HEAD SST THREAD FORMING |
|
17 |
PP10023 |
SCREW 10-24 X 3/8 SELF TAPPING |
|
18 |
P0076100 |
SCREW 10-24 X 3/4 SELF TAPPING |
|
19 |
P0092300 |
NUT HEX 10-24 KEP ZN |
|
20 |
A3527101-C |
FLUE DEFLECTOR SGC |
10 |
L20-221 Rev 4 (06/06) |
Exploded Parts-SG Gas Models
Tank & Flue Drawing A
L20-221 Rev 4 (06/06) |
11 |
Exploded Parts-SG Gas Models
B) BURNER ASSEMBLY
|
|
Burner Assembly Drawing B Parts List B(A) |
|
|
|
|
|
ITEM # |
PART # |
PART DESCRIPTION |
|
1 |
SEE PARTS LIST B(B) |
BURNER MANIFOLD WELDMENT |
|
|
B8042001 |
SELF-CLEANING BURNER RUNNER TUBE SG14, SG14R |
|
2 |
B8042002 |
SELF-CLEANING BURNER RUNNER TUBE SG18 |
|
B8042003 |
SELF-CLEANING BURNER RUNNER TUBE LEFT-HAND SG14T |
||
|
|||
|
B8042004 |
SELF-CLEANING BURNER RUNNER TUBE RIGHT-HAND SG14T |
|
3 |
60147801 |
THERMAL-LIMIT SWITCH WITH MANUAL RESET |
|
|
A8028401 |
GASKET BURNER BRACKET SG14R,SGM1824 |
|
|
A8039601 |
GASKET BURNER BRACKET SGM24 |
|
4 |
A8039701 |
GASKET BURNER BRACKET SGM34 |
|
|
3M SUPER 77 MULTIPURPOSE HIGH TACK SPRAY ADHESIVE |
||
|
|
||
|
|
(REQUIRED WHEN INSTALLING NEW ITEM #4) |
|
|
|
DO NOT SPRAY ADHESIVE ACROSS BURNER FACES |
|
|
A8027701 |
BURNER FLAME JUMPER SG14,SG14R,SG18,SG18F,SGC |
|
5 |
A8031601 |
BURNER CROSSOVER SGM1824,SGM24,SGM34 |
|
|
B8034601 |
BURNER FLAME JUMPER WELDMENT SG14,SG14R,SG18,SG18F |
|
|
A8031701 |
BURNER SHIELD NATURAL LEFT-HAND SGM1824 |
|
|
A8034901-C |
BURNER COLLAR LP FULL LEFT-HAND SGM1824 |
|
6 |
A8031705 |
BURNER SHIELD NATURAL LEFT-HAND SGM24 |
|
A8034907-C |
BURNER COLLAR LP FULL LEFT-HAND SGM24 |
||
|
|||
|
A8031709 |
BURNER SHIELD NATURAL LEFT-HAND SGM34 |
|
|
A8034911-C |
BURNER COLLAR LP FULL LEFT-HAND SGM34 |
|
|
A8031703 |
BURNER SHIELD NATURAL RIGHT-HAND SGM1824 |
|
|
A8034903-C |
BURNER COLLAR LP FULL RIGHT-HAND SGM1824 |
|
7 |
A8031707 |
BURNER SHIELD NATURAL RIGHT-HAND SGM24 |
|
A8034909-C |
BURNER COLLAR LP FULL RIGHT-HAND SGM24 |
||
|
|||
|
A8031711 |
BURNER SHIELD NATURAL RIGHT-HAND SGM34 |
|
|
A8034913-C |
BURNER COLLAR LP FULL RIGHT-HAND SGM34 |
|
|
B8037301-C |
BURNER SLOTTED-FACE NATURAL |
|
8 |
B8037302-C |
BURNER SLOTTED-FACE LP |
|
B8041901 |
BURNER INCONEL 601 WIRE-FACE SCREEN NATURAL SCB & LP |
||
|
|||
|
(REPLACES B8030001) |
||
|
|
||
9 |
60127501 |
FITTING ADAPTER FLARED 15/16-16 UN-2A X 1/2 FNPT BRASS |
|
10 |
60129701 |
FITTING 1/4 MNPT X .344-32 UNS ORIFICE TIP BRASS |
|
11A |
60132801 |
FITTING TEST PRESSURE PLUG 1/8-27 (CE) |
|
11B |
N/A |
PLUG 1/8 NPT 3/16 HEX SOCKET STEEL |
|
12 |
SEE PARTS LIST B(B) |
ORIFICE TIP |
|
13 |
PP10023 |
SCREW 10-24 X 3/8 SELF TAPPING |
|
14 |
PP10687 |
SCREW 6-32 X 5/16 TRUSS HEAD PHILLIPS ZN |
|
15 |
SEE PARTS LIST B(B) |
BURNER BRACKET |
|
|
A2036904-C |
SELF-CLEANING BURNER HIGH-LIMIT BRACKET SG14, SG14R, SG18 |
|
16 |
A2036902-C |
SELF-CLEANING BURNER HIGH-LIMIT BRACKET LEFT-HAND SG14T |
|
|
A2036906-C |
SELF-CLEANING BURNER HIGH-LIMIT BRACKET RIGHT-HAND SG14T |
|
17 |
P0075300 |
SCREW 10-16 X 5/8 HEX HEAD SELF-DRILLING |
|
18 |
A8039901 |
BURNER SHROUD SGM34 |
|
|
B8031603 |
BURNER ASSEMBLY INCONEL 601 WIRE-FACE SG14 |
|
19 |
B8031702 |
BURNER ASSEMBLY SLOT FACE NATURAL SG14R |
|
B8031705 |
BURNER ASSEMBLY INCONEL 601 WIRE-FACE SG14R |
||
NOT SHOWN |
|||
B8031803 |
BURNER ASSEMBLY INCONEL 601 WIRE-FACE SG18 |
||
(INCLUDES |
|||
ITEMS: 1, 5- |
B8033002 |
BURNER ASSEMBLY INCONEL 601 WIRE-FACE SG14T |
|
10, 11B, 13, |
B8042602 |
BURNER ASSEMBLY INCONEL 601 WIRE-FACE SGM1824 |
|
15, & 18) |
|||
B8042702 |
BURNER ASSEMBLY INCONEL 601 WIRE-FACE SGM24 |
||
|
|||
|
B8042802 |
BURNER ASSEMBLY INCONEL 601 WIRE-FACE SGM34 |
12 |
L20-221 Rev 4 (06/06) |
Exploded Parts-SG Gas Models
Burner Assembly Drawing B
L20-221 Rev 4 (06/06) |
13 |
Exploded Parts-SG Gas Models
|
|
Burner Assembly Drawing B Parts List B(B) |
|
|
|
|
|
ITEM # |
PART # |
PART DESCRIPTION |
|
|
B8029701 |
BURNER MANIFOLD WELDMENT SG18F |
|
|
B8029801 |
BURNER MANIFOLD WELDMENT SG18 |
|
|
B8029901 |
BURNER MANIFOLD ASSEMBLY SG14T |
|
1 |
B8035301 |
BURNER MANIFOLD WELDMENT SGC |
|
B8039101 |
BURNER MANIFOLD WELDMENT CENTER-TAP SG14, SG14R (REPLACES B8029701) |
||
|
|||
|
B8042301 |
BURNER MANIFOLD WELDMENT SGM1824 |
|
|
B8042401 |
BURNER MANIFOLD WELDMENT SGM24 |
|
|
B8042501 |
BURNER MANIFOLD WELDMENT SGM34 |
|
|
A7513701 |
ORIFICE TIP 1.45mm DIA |
|
|
P6071309 |
ORIFICE TIP 1/16 DIA |
|
|
P6071336 |
ORIFICE TIP #36 DIA |
|
|
P6071337 |
ORIFICE TIP #37 DIA |
|
|
P6071338 |
ORIFICE TIP #38 DIA |
|
|
P6071339 |
ORIFICE TIP #39 DIA |
|
|
P6071340 |
ORIFICE TIP #40 DIA |
|
12 |
P6071341 |
ORIFICE TIP #41 DIA |
|
|
P6071342 |
ORIFICE TIP #42 DIA |
|
|
P6071343 |
ORIFICE TIP #43 DIA |
|
|
P6071344 |
ORIFICE TIP #44 DIA |
|
|
P6071353 |
ORIFICE TIP #53 DIA |
|
|
P6071354 |
ORIFICE TIP #54 DIA |
|
|
P6071355 |
ORIFICE TIP #55 DIA |
|
|
PP10859 |
ORFICE TIP 1.51 mm DIA |
|
|
A8027901 |
BURNER BRACKET SG14 |
|
|
A8028001 |
BURNER BRACKET SG14R |
|
|
A8028101 |
BURNER BRACKET SG14T |
|
|
A8028201 |
BURNER BRACKET SG18 |
15A8033201 BURNER BRACKET SGC
A8033701 BURNER BRACKET SG18F
A8039301 BURNER BRACKET SGM1824
A8039401 BURNER BRACKET SGM24
A8039501 BURNER BRACKET SGM34
14 |
L20-221 Rev 4 (06/06) |
Exploded Parts-SG Gas Models
This Page Left Intentionally Blank
L20-221 Rev 4 (06/06) |
15 |
Exploded Parts-SG Gas Models
C) GAS TRAIN
|
|
Gas Train Drawing C1 Parts List |
|
|
|
|
|
ITEM# |
PART# |
PART DESCRIPTION |
|
1 |
60125901 |
TUBE, VENT GAS VALVE |
|
2 |
60127601 |
FITTING,ADAPTER FEMALE SWIVEL X 1/2 MPT |
|
3 |
A8029001-C |
PIPING, VALVE SHIELD SG, SGC, SG18F |
|
A8032101-C |
PIPING, VALVE SHIELD SGM 24V |
||
|
|||
4 |
60127401 |
FITTING, ELBOW MALE FLARE X MPT |
|
5 |
P0007300 |
SCREW, 8-32 X 1/4 HEX HEAD SLOTTED ZN |
|
6 |
P7037092 |
NIPPLE, BLACK 1/2 NPT X 1.5 |
|
7 |
60127501 |
FITTING, ADAPTER MALE FLARE X 1/2 FPT |
|
60133602 |
FITTING,GAS RESTRICTOR 1/2"NPT CE 3.25MM (UNREGULATED ONLY) |
||
|
|||
8 |
A8030101 |
PIPING, VALVE SHIELD SG14T |
|
9 |
A8029105 |
COUPLING, GAS SUPPLY SHORT SG, MKG (PRIOR TO 2/05: USE A8029103) |
|
10 |
60128101 |
VALVE, GAS SUPPLY SHUTOFF |
|
|
60128014 |
TUBING, FLEXIBLE WITH FITTINGS 16 GAS SGC, (SG PRIOR TO 2/05) |
|
11 |
60128015 |
TUBING, FLEXIBLE WITH FITTINGS 22 GAS (SG AFTER 2/05) |
|
|
60128016 |
TUBING, FLEXIBLE WITH FITTINGS 28 GAS SGM, SG18F |
|
12 |
P7037090 |
NIPPLE, BLACK 1/2 NPT CL |
|
13 |
B8034701 |
PIPING, GAS INLET MANIFOLD WELDMENT SG14T |
|
14 |
P7037750 |
ELBOW, BLACK STREET 90 1/2 NPT |
16 |
L20-221 Rev 4 (06/06) |
Exploded Parts-SG Gas Models
Gas Train Drawing C1
L20-221 Rev 4 (06/06) |
17 |
Exploded Parts-SG Gas Models
Gas Train Drawing C2 Parts List
ITEM# |
PART# |
PART DESCRIPTION |
|
60113501-C VALVE, GAS VR8204 24V FAST NAT SG |
|
|
60113502-C VALVE, GAS VR8204 24V FAST LP SG |
|
|
60113503-C VALVE, GAS VR8204 24V FAST CE NAT SG |
|
160113504-C VALVE, GAS VR8204 24V FAST CE LP SG
60113505-C VALVE, GAS VR8204 24V FAST CE UNREGULATED NAT SG 60148701-C VALVE, GAS VR8304M 24V FAST NAT SGM
60148702-C VALVE, GAS VR8304M 24V FAST LP SGM
2
60125201-C VALVE, GAS VS820 NAT SG, SGC, SG18F
60125202-C VALVE, GAS VS820 LP SG, SGC, SG18F
60132901-C VALVE, GAS U7000 CE NAT SG, SGC, SG18F
360132902-C VALVE, GAS U7000 CE LP SG, SGC, SG18F
60132903-C VALVE, GAS U7000 CE UNREGULATED SG, SGC, SG18F
460132801 FITTING, TEST PRESSURE PLUG
5
A8035302 PIPING, PILOT BRACKET SG14 SG14R SG18
A8035402 PIPING, PILOT BRACKET SG14T
6
A8035002 PIPING, PILOT BRACKET WITH TAB SG14 SG14R SG18
A8035102 PIPING, PILOT BRACKET WITH TAB SG14T
7A8039802 PIPING, PILOT BRACKET MOUNT SGM
8
60130901 PILOT, INLINE EI NAT 1.5
60130902 PILOT, INLINE EI LP 1.5
9
60130905 PILOT, INLINE EI NAT 2.98
60130906 PILOT, INLINE EI LP 2.98
10
60128801 PILOT, REVERSE STANDING NAT SG
60128802 PILOT, REVERSE STANDING LP SG
60119001 TUBE, FLEXIBLE WITHOUT FITTINGS 18 X 1/4 OD SG, SG18F, SGC
1160119011 TUBE, FLEXIBLE WITHOUT FITTINGS 18 X 1/4 OD 3/4 STR SGM1824 60119012 TUBE, FLEXIBLE WITHOUT FITTINGS 30 X 1/4 OD 3/4 STR SGM24/34
1260088001 SCREW, 10-32 X 1/4 HEX HEAD SST
1360088006 SCREW, 10-32 X 1/2 HEX HEAD SST
1460125501 THERMOPILE, MILLIVOLT
15P5047540 THERMOCOUPLE T46 24
16A8035201 PIPING, PILOT BRACKET ADD-ON SG CE
17PP11373 NUT, HEX KEP 10-32 ZN
1860148101 VALVE, SOLENOID 24VAC
19A8039001 PIPING, TUBING SCB SG
20P7037797 FITTING, COMPRESSION ELBOW BRASS 1/4TU X 1/8MPT
21PP10934 FITTING, COMPRESSION BRASS STRAIGHT 1/4TU X 1/8MPT
2260119010 TUBE, FLEXIBLE WITHOUT FITTINGS 6 X 1/4 OD
2908-0940501 ORIFICE, PILOT RUNNER TUBE #52 NAT SG14, SG14R, SG14T
232908-0940502 ORIFICE, PILOT RUNNER TUBE #68 LP SG 2908-0940503 ORIFICE, PILOT RUNNER TUBE #50 NAT SG18
24A2036701-C CONTROL BOX, PILOT ORIFICE RETAINING BRACKET SG14
25A2036801-C CONTROL BOX, PILOT ORIFICE RETAINING BRACKET SG14T LH
26A2036802-C CONTROL BOX, PILOT ORIFICE RETAINING BRACKET SG14T RH
27PP10023 SCREW, 10-24 X 3/8 SELF TAPPING
28A |
B6783401 |
WIRING, IGNITION CABLE WITH GROUND WRAP 20" SG* |
28B |
B6783402 |
WIRING, IGNITION CABLE WITH GROUND WRAP 23" SGM* |
18 |
L20-221 Rev 4 (06/06) |
Exploded Parts-SG Gas Models
Gas Train Drawing C2
L20-221 Rev 4 (06/06) |
19 |
Exploded Parts-SG Gas Models
D) GAS CONVERSION KITS
Gas Conversion Kits Quick Reference
MILLIVOLT SYSTEM, HONEYWELL VS820 GAS VALVE
COVERING ALL COUNTRIES EXCEPT:
Turkey, Switzerland, Slovenia, Slavakia, Spain, Romania, Bulgaria, Czech Republic, England, Scotland, Wales, Hungary, Ireland, Luxembourg, Poland, Portugal, France, Germany, South Korea, Australia, Belgium, Cyprus, Malta, Austria, Denmark, Estonia, Finland, Greece, Italy, Latvia, Lithuania, Norway, Sweden
For these countries see parts lists D5, D6, D7, or D8
BURNER TYPE |
|
WIRE FACED BURNERS |
|
|
SLOT FACED BURNERS |
|
||
|
NAT TO LP |
PARTS LIST |
LP TO NAT |
PARTS LIST |
NAT TO LP |
PARTS LIST |
LP TO NAT |
PARTS LIST |
SG14 |
B7510084-C |
D2 |
B7510081-C |
D2 |
B8043205-C |
D1 |
B8043209-C |
D1 |
SG14R |
B7510085-C |
D2 |
B7510082-C |
D2 |
B8043206-C |
D1 |
B8043210-C |
D1 |
SG14T |
B7510086-C |
D2 |
B7510083-C |
D2 |
B8043207-C |
D1 |
B8043211-C |
D1 |
SG18 |
B7510084-C |
D2 |
B7510081-C |
D2 |
B8043208-C |
D1 |
B8043212-C |
D1 |
SG14 DI |
B7510084-C |
D2 |
B7510081-C |
D2 |
N/A |
|
N/A |
|
SG14R DI |
B7510085-C |
D2 |
B7510082-C |
D2 |
B8043206-C |
D1 |
B8043210-C |
D1 |
SG14T DI |
B7510086-C |
D2 |
B7510083-C |
D2 |
N/A |
|
N/A |
|
SG18DI |
B7510084-C |
D2 |
B7510081-C |
D2 |
N/A |
|
N/A |
|
SGC SHORT FLUE |
N/A |
|
N/A |
|
B8043229-C |
D3 |
B8043230-C |
D3 |
SGC TALL FLUE |
N/A |
|
N/A |
|
B8043229-C |
D3 |
B8043231-C |
D3 |
(PRIOR TO 5/03) |
|
|
||||||
|
|
|
|
|
|
|
|
|
SG18F |
N/A |
|
N/A |
|
B8043205-C |
D1 |
B8043209-C |
D1 |
24VAC SYSTEM, HONEYWELL VR8204 GAS VALVE (VR8304M MEGA)
BURNER TYPE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WIRE FACED OR SCB BURNERS |
|
|
|
|
|
|
|
|
|
|
|
SLOT FACED BURNERS |
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NAT TO LP |
PARTS LIST |
LP TO NAT |
PARTS LIST |
NAT TO LP |
PARTS LIST |
LP TO NAT |
|
|
PARTS LIST |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
SG14 |
|
B7510090-C |
|
D2 |
B7510087-C |
|
|
D2 |
B8043213-C |
D1 |
B8043217-C |
|
|
|
|
D1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
SG14R |
|
B7510091-C |
|
D2 |
B7510088-C |
|
|
D2 |
B8043214-C |
D1 |
B8043218-C |
|
|
|
|
D1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
SG14T |
|
B7510092-C |
|
D2 |
B7510089-C |
|
|
D2 |
B8043215-C |
D1 |
B8043219-C |
|
|
|
|
D1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
SG18 |
|
B7510090-C |
|
D2 |
B7510087-C |
|
|
D2 |
B8043216-C |
D1 |
B8043220-C |
|
|
|
|
D1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
SGM1824 |
|
B8043232-C |
|
D4 |
B8043233-C |
|
|
D4 |
|
|
N/A |
|
|
|
|
|
|
|
|
N/A |
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
SGM24 |
|
B8043234-C |
|
D4 |
B8043235-C |
|
|
D4 |
|
|
N/A |
|
|
|
|
|
|
|
|
N/A |
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
SGM34 |
|
B8043236-C |
|
D4 |
B8043237-C |
|
|
D4 |
|
|
N/A |
|
|
|
|
|
|
|
|
N/A |
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20 |
L20-221 Rev 4 (06/06) |
Exploded Parts-SG Gas Models
Gas Conversion Kits Simple Instructions Drawing D
L20-221 Rev 4 (06/06) |
21 |
Exploded Parts-SG Gas Models
Gas Conversion Kits Slot Face Burners Parts List D1
SLOT FACED BURNERS NATURAL TO LP
ITEM # |
MODELS |
VALVE |
PART # |
PART DESCRIPTION |
QTY |
|
|
SG14,SG18F |
VS820 |
B8043205-C |
GAS CONV KIT SLOT FACED NAT TO LP VS820 SG14 |
|
|
|
SG14R, SG14RDI |
VS820 |
B8043206-C |
GAS CONV KIT SLOT FACED NAT TO LP VS820 SG14R |
|
|
|
SG14T |
VS820 |
B8043207-C |
GAS CONV KIT SLOT FACED NAT TO LP VS820 SG14T |
|
|
1 |
SG18 |
VS820 |
B8043208-C |
GAS CONV KIT SLOT FACED NAT TO LP VS820 SG18 |
|
|
SG14 |
VR8204 |
B8043213-C |
GAS CONV KIT SLOT FACED NAT TO LP VR8204 SG14 |
|
||
|
|
|||||
|
SG14R |
VR8204 |
B8043214-C |
GAS CONV KIT SLOT FACED NAT TO LP VR8204 SG14R |
|
|
|
SG14T |
VR8204 |
B8043215-C |
GAS CONV KIT SLOT FACED NAT TO LP VR8204 SG14T |
|
|
|
SG18 |
VR8204 |
B8043216-C |
GAS CONV KIT SLOT FACED NAT TO LP VR8204 SG18 |
|
|
|
SG14, SG18F |
VS820/VR8204 |
P6071353 |
ORIFICE TIP #53 DIA |
4 |
|
1A |
SG14R, SG14RDI |
VS820/VR8204 |
P6071309 |
ORIFICE TIP 1/16 DIA |
4 |
|
SG14T |
VS820/VR8204 |
A7513701 |
ORIFICE TIP 1.45mm DIA |
4 |
||
|
||||||
|
SG18 |
VS820/VR8204 |
P6071353 |
ORIFICE TIP #53 DIA |
5 |
|
|
SG14, SG18F, SG18, |
VS820 |
60126502 |
GAS VALVE CONV KIT VS820 NAT TO LP |
1 |
|
|
SG14R, SG14RDI |
|||||
|
|
|
|
|
||
1B |
SG14T |
VS820 |
60126502 |
GAS VALVE CONV KIT VS820 NAT TO LP |
2 |
|
|
SG14, SG18, SG14R |
VR8204 |
PP11141 |
GAS VALVE CONV KIT VR8204 NAT TO LP |
1 |
|
|
SG14T |
VR8204 |
PP11141 |
GAS VALVE CONV KIT VR8204 NAT TO LP |
2 |
|
|
SG14, SG18F, SG18, |
VS820/VR8204 |
P6071665 |
ORFICE PILOT SPUD LP .016 DIA |
1 |
|
1C |
SG14R, SG14RDI |
|||||
|
|
|
|
|||
|
SG14T |
VS820/VR8204 |
P6071665 |
ORFICE PILOT SPUD LP .016 DIA |
2 |
|
1D |
SG14, SG18F, SG14T |
VS820/VR8204 |
PP10426 |
GAS CONV NOTICE LABEL NAT TO LP |
1 |
|
SG14R, SG14RDI, SG18 |
||||||
|
SG14, SG18F, SG14T, |
VS820/VR8204 |
B8037302-C |
BURNER SLOTTED-FACE 304-SST LP |
4 |
|
1E |
SG14R, SG14RDI |
|||||
|
|
|
|
|||
|
SG18 |
VS820/VR8204 |
B8037302-C |
BURNER SLOTTED-FACE 304-SST LP |
5 |
SLOT FACED BURNERS LP TO NATURAL
ITEM # |
MODELS |
VALVE |
PART # |
PART DESCRIPTION |
QTY |
|
|
SG14,SG18F |
VS820 |
B8043209-C |
GAS CONV KIT SLOT FACED LP TO NAT VS820 SG14 |
|
|
|
SG14R, SG14RDI |
VS820 |
B8043210-C |
GAS CONV KIT SLOT FACED LP TO NAT VS820 SG14R |
|
|
|
SG14T |
VS820 |
B8043211-C |
GAS CONV KIT SLOT FACED LP TO NAT VS820 SG14T |
|
|
1 |
SG18 |
VS820 |
B8043212-C |
GAS CONV KIT SLOT FACED LP TO NAT VS820 SG18 |
|
|
SG14 |
VR8204 |
B8043217-C |
GAS CONV KIT SLOT FACED LP TO NAT VR8204 SG14 |
|
||
|
|
|||||
|
SG14R |
VR8204 |
B8043218-C |
GAS CONV KIT SLOT FACED LP TO NAT VR8204 SG14R |
|
|
|
SG14T |
VR8204 |
B8043219-C |
GAS CONV KIT SLOT FACED LP TO NAT VR8204 SG14T |
|
|
|
SG18 |
VR8204 |
B8043220-C |
GAS CONV KIT SLOT FACED LP TO NAT VR8204 SG18 |
|
|
|
SG14, SG18F |
VS820/VR8204 |
P6071341 |
ORIFICE TIP #41 DIA |
4 |
|
1A |
SG14R, SG14RDI |
VS820/VR8204 |
P6071338 |
ORIFICE TIP #38 DIA |
4 |
|
SG14T |
VS820/VR8204 |
P6071343 |
ORIFICE TIP #43 DIA |
4 |
||
|
||||||
|
SG18 |
VS820/VR8204 |
P6071341 |
ORIFICE TIP #41 DIA |
5 |
|
|
SG14, SG18F, SG18, |
VS820 |
60126501 |
GAS VALVE CONV KIT VS820 LP TO NAT |
1 |
|
|
SG14R, SG14RDI |
|||||
|
|
|
|
|
||
1B |
SG14T |
VS820 |
60126501 |
GAS VALVE CONV KIT VS820 LP TO NAT |
2 |
|
|
SG14, SG18, SG14R |
VR8204 |
PP11319 |
GAS VALVE CONV KIT VR8204 LP TO NAT |
1 |
|
|
SG14T |
VR8204 |
PP11319 |
GAS VALVE CONV KIT VR8204 LP TO NAT |
2 |
|
|
SG14, SG18F, SG18, |
VS820/VR8204 |
P6071666 |
ORFICE PILOT SPUD NAT .022 DIA |
1 |
|
1C |
SG14R, SG14RDI |
|||||
|
|
|
|
|||
|
SG14T |
VS820/VR8204 |
P6071666 |
ORFICE PILOT SPUD NAT .022 DIA |
2 |
|
1D |
SG14, SG18F, SG14T |
VS820/VR8204 |
PP10427 |
GAS CONV NOTICE LABEL LP TO NAT |
1 |
|
SG14R, SG14RDI, SG18 |
||||||
|
SG14, SG18F, SG14T, |
VS820/VR8204 |
B8037301-C |
BURNER SLOTTED-FACE 304-SST NAT |
4 |
|
1E |
SG14R, SG14RDI |
|||||
|
|
|
|
|||
|
SG18 |
VS820/VR8204 |
B8037301-C |
BURNER SLOTTED-FACE 304-SST NAT |
5 |
22 |
L20-221 Rev 4 (06/06) |
Exploded Parts-SG Gas Models
Gas Conversion Kits Wire Face Burners Parts List D2
WIRE FACED OR SCB BURNERS NATURAL TO LP
ITEM # |
MODELS |
VALVE |
PART # |
PART DESCRIPTION |
QTY |
|
|
SG14, SG14DI, SG18, SG18DI |
VS820 |
B7510084-C |
GAS CONV KIT NAT TO LP VS820 SG14,SG18 |
|
|
|
SG14R, SG14RDI |
VS820 |
B7510085-C |
GAS CONV KIT NAT TO LP VS820 SG14R |
|
|
1 |
SG14T, SG14TDI |
VS820 |
B7510086-C |
GAS CONV KIT NAT TO LP VS820 SG14T |
|
|
SG14, SG18 |
VR8204 |
B7510090-C |
GAS CONV KIT NAT TO LP VR8204 SG14,SG18 |
|
||
|
|
|||||
|
SG14R |
VR8204 |
B7510091-C |
GAS CONV KIT NAT TO LP VR8204 SG14R |
|
|
|
SG14T |
VR8204 |
B7510092-C |
GAS CONV KIT NAT TO LP VR8204 SG14T |
|
|
|
SG14, SG14DI, SG18, SG18DI |
VS820/VR8204 |
P6071353 |
ORIFICE TIP #53 DIA |
5 |
|
1A |
SG14R, SG14RDI |
VS820/VR8204 |
P6071309 |
ORIFICE TIP 1/16 DIA |
4 |
|
|
SG14T, SG14TDI |
VS820/VR8204 |
A7513701 |
ORIFICE TIP 1.45mm DIA |
4 |
|
|
SG14, SG14DI, SG14R, |
VS820 |
60126502 |
GAS VALVE CONV KIT VS820 NAT TO LP |
1 |
|
|
SG14RDI, SG18, SG18DI |
|||||
|
|
|
|
|
||
1B |
SG14T, SG14TDI |
VS820 |
60126502 |
GAS VALVE CONV KIT VS820 NAT TO LP |
2 |
|
|
SG14, SG18, SG14R |
VR8204 |
PP11141 |
GAS VALVE CONV KIT VR8204 NAT TO LP |
1 |
|
|
SG14T |
VR8204 |
PP11141 |
GAS VALVE CONV KIT VR8204 NAT TO LP |
2 |
|
|
SG14, SG14DI, SG14R, |
VS820/VR8204 |
P6071665 |
ORFICE PILOT SPUD LP .016 DIA |
1 |
|
1C |
SG14RDI, SG18, SG18DI |
|||||
|
|
|
|
|||
|
SG14T, SG14TDI |
VS820/VR8204 |
P6071665 |
ORFICE PILOT SPUD LP .016 DIA |
2 |
|
1D |
SG14, SG14DI, SG14R, SG14T |
VS820/VR8204 |
PP10426 |
GAS CONV NOTICE LABEL NAT TO LP |
1 |
|
SG14TDI, SG14RDI, SG18, SG18DI |
WIRE FACED OR SCB BURNERS LP TO NATURAL
ITEM # |
MODELS |
VALVE |
PART # |
PART DESCRIPTION |
QTY |
|
|
SG14, SG14DI, SG18, SG18DI |
VS820 |
B7510081-C |
GAS CONV KIT LP TO NAT VS820 SG14,SG18 |
|
|
|
SG14R, SG14RDI |
VS820 |
B7510082-C |
GAS CONV KIT LP TO NAT VS820 SG14R |
|
|
1 |
SG14T, SG14TDI |
VS820 |
B7510083-C |
GAS CONV KIT LP TO NAT VS820 SG14T |
|
|
SG14, SG18 |
VR8204 |
B7510087-C |
GAS CONV KIT LP TO NAT VR8204 SG14,SG18 |
|
||
|
|
|||||
|
SG14R |
VR8204 |
B7510088-C |
GAS CONV KIT LP TO NAT VR8204 SG14R |
|
|
|
SG14T |
VR8204 |
B7510089-C |
GAS CONV KIT LP TO NAT VR8204 SG14T |
|
|
|
SG14, SG14DI, SG18, SG18DI |
VS820/VR8204 |
P6071341 |
ORIFICE TIP #41 DIA |
5 |
|
1A |
SG14R, SG14RDI |
VS820/VR8204 |
P6071338 |
ORIFICE TIP #38 DIA |
4 |
|
|
SG14T, SG14TDI |
VS820/VR8204 |
P6071343 |
ORIFICE TIP #43 DIA |
4 |
|
|
SG14, SG14DI, SG14R, |
VS820 |
60126501 |
GAS VALVE CONV KIT VS820 LP TO NAT |
1 |
|
|
SG14RDI, SG18, SG18DI |
|||||
|
|
|
|
|
||
1B |
SG14T, SG14TDI |
VS820 |
60126501 |
GAS VALVE CONV KIT VS820 LP TO NAT |
2 |
|
|
SG14, SG18, SG14R |
VR8204 |
PP11319 |
GAS VALVE CONV KIT VR8204 LP TO NAT |
1 |
|
|
SG14T |
VR8204 |
PP11319 |
GAS VALVE CONV KIT VR8204 LP TO NAT |
2 |
|
|
SG14, SG14DI, SG14R, |
VS820/VR8204 |
P6071666 |
ORFICE PILOT SPUD NAT .022 DIA |
1 |
|
1C |
SG14RDI, SG18, SG18DI |
|||||
|
|
|
|
|||
|
SG14T, SG14TDI |
VS820/VR8204 |
P6071666 |
ORFICE PILOT SPUD NAT .022 DIA |
2 |
|
1D |
SG14, SG14DI, SG14R, SG14T |
VS820/VR8204 |
PP10427 |
GAS CONV NOTICE LABEL LP TO NAT |
1 |
|
SG14TDI, SG14RDI, SG18, SG18DI |
||||||
|
|
|
|
|
L20-221 Rev 4 (06/06) |
23 |
Loading...