Pioneer X-HM76 User Manual

X-HM76D

XC-HM86D X-HM76 X-HM86D

Language select / Sélection de la langue / Selección de idioma / Selezione lingua / Sprachauswahl / Taal selecteren / Выбор языка

English

Italiano Deutsch Nederlands

Русский

Français

Español

E N

> Before Start > Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

NETWORK CD RECEIVER SYSTEM

X-HM76D X-HM76 X-HM86D

NETWORK CD RECEIVER

XC-HM86D

Instruction Manual

Before Start

What's in the box ..........................................................................2

Part Names

Front Panel ...................................................................................4

Rear Panel (X-HM76D, X-HM86D, XC-HM86D) .......................... 5

Rear Panel (X-HM76) ...................................................................6

Remote Controller ......................................................................... 7

Display .......................................................................................... 8

Speakers System (X-HM76D, X-HM76) ....................................... 9

Speakers System (X-HM86D) .................................................... 10

Install

Connect the Speakers ................................................................ 11

Connecting the antennas and power cord, etc. .......................... 12

Initial Setup

Power On & Initial Setup ............................................................. 13

Time settings ..............................................................................16

Playback

Playing CDs ................................................................................17

USB Storage Device/HDD .......................................................... 19

Internet Radio ............................................................................. 21

Spotify ......................................................................................... 22

Listening to the FM Radio ........................................................... 23

Listening to DAB Digital Radio (X-HM76D, X-HM86D, XC-HM86D) ...... 26

BLUETOOTH® ............................................................................ 27

AirPlay

Playing audio from an external device ........................................ 30

Music Server ............................................................................... 31

Using the alarm to start play ....................................................... 33

Entering text, adjusting sound quality, etc. .................................34

Supplementary information

Supplementary information for player functions ..........................35

Advanced Setup

Advanced Settings....................................................................... 36

Firmware Update ........................................................................ 40

Others

Troubleshooting ..........................................................................42

General Specifications ................................................................ 45

License and Trademark Information ...........................................47

...................................................................................... 29

> Before Start

E N

What's in the box

Before Start

X-HM76D : 12356 X-HM76 : 12456 X-HM86D : 123567 XC-HM86D : 123

Main unit (1)

> Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

Indoor FM antenna (1)

Remote controller (RC-945S) (1), Batteries (AAA/R03) (2)

DAB/FM wire antenna (1)

Speaker system (2)

Speaker cable (1.5 m) (2)

> Before Start

E N

Non-skid pads (8)

0 The power cord must be connected only after all other cable connections are completed. 0 Connect speakers with 4 Ω to 16 Ω impedance. 0 We will not accept responsibility for damage arising from the connection of equipment

manufactured by other companies.

0 Functionality may be introduced by firmware updates and service providers may cease

services, meaning that some network services and content may become unavailable in the future.

0 Specifications and appearance are subject to change without prior notice.

> Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

> Before Start >Part Names > Install > Initial Setup > Playback

E N

   

 





Front Panel

Part Names

1. Í STANDBY/ON button: Turns the unit on or to standby mode.

2. INPUT button: Switches the input to be played.

3. Play button:

: Return to the beginning of the track being played. Press and hold to rewind the

track quickly. (CD) Move to the previous track. (USB, Music Server)

: Move to the next track. Press and hold to fast-forward through the track. (CD)

Move to the next track. (USB, Music Server)

: This button stops playback.

/; : This button pauses the playback.

port: Connect a USB storage device or HDD (hard disk drive) to play music files. You can

(maximum 5 V/1 A) on the rear of the unit.

∫ 1

0 Depending on the input, the operation may not start.

4. < button: Open or close the disc tray.

5. Disc tray: Place discs here. 8-cm discs can also be used.

6. USB also supply power (maximum 5 V/0.5 A) to USB devices with a USB cable.

0 When connecting a HDD that requires more than 5 V/0.5 A, connect to the USB port

7. PHONES jack: Connect stereo headphones with a mini plug.

8. Power indicator: This lights blue when the unit is on.

9. TIMER indicator: This lights when the alarm is set.

10.

Remote control sensor

11.

Display (ÄP8)

12.

VOLUME dial: Adjust the volume. Adjust between 0 and 50.

Supplementary information | Advanced Setup | Others

> Before Start >Part Names > Install > Initial Setup > Playback

E N

 

 

  





180°

90°

Rear Panel (X-HM76D, X-HM86D, XC-HM86D)

Supplementary information | Advanced Setup | Others

1. Power cord

2. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH enabled device. Adjust their angles according to the connection status.

3. Speaker terminals: Connect speakers with speaker cables.

4. DAB/FM ANTENNA jack: Connect the supplied DAB/FM wire antenna.

5. LINE IN jack: You can play the audio from an external device such as a television connected with an analogue audio cable.

6. SUBWOOFER PRE OUT jacks: Connect a subwoofer with built-in amplifier.

7. USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You

8. NETWORK jack: Connect to the network with an ethernet cable.

9. DIGITAL IN OPTICAL jack: You can play the digital audio from an external device such as

can also supply power (maximum 5 V/1 A) to USB devices with a USB cable.

a television connected with a digital optical cable.

> Before Start >Part Names > Install > Initial Setup > Playback

E N









 



 



180°

90°

Rear Panel (X-HM76)

Supplementary information | Advanced Setup | Others

1. Power cord

2. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH enabled device. Adjust their angles according to the connection status.

3. Speaker terminals: Connect speakers with speaker cables.

4. FM ANTENNA jack: Connect the supplied indoor FM antenna.

5. LINE IN jack: You can play the audio from an external device such as a television connected with an analogue audio cable.

6. SUBWOOFER PRE OUT jacks: Connect a subwoofer with built-in amplifier.

7. USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You

8. NETWORK jack: Connect to the network with an ethernet cable.

9. DIGITAL IN OPTICAL jack: You can play the digital audio from an external device such as

can also supply power (maximum 5 V/1 A) to USB devices with a USB cable.

a television connected with a digital optical cable.

> Before Start >Part Names > Install > Initial Setup > Playback

E N



 



  

 

















30°

Approx.7 m

Remote Controller

1. Í STANDBY/ON button: Turns the unit on or into standby mode.

2. TIMER button: Used to set the time and set the alarm.

3. SLEEP button: Set the sleep timer. When the time set (30, 60, or 90 minutes) has elapsed, the unit switches to standby. If SLEEP button is pressed after setting, the time remaining until sleep is displayed.

4. INPUT SELECTOR buttons: Switches the input to be played.

5. Play buttons:

:: Return to the beginning of the track being played. (CD)

Move to the track before the one being played. (USB, Music Server)

X/;: Play or pause play. 9: Move to the next track.

22: Rewind the track quickly. (CD only)

∫: Stop playback.

11: Fast-forward the track. (CD only)

0 Depending on the input, the operation may not start. PRESET i/j buttons: Used to select stations that have been registered or to give names to stations. TUNE i/j buttons: Used to select radio stations.

6. MEMORY button: Used to register favorite radio stations.

7. SHUFFLE/REPEAT button: Set repeat play and shuffle play.

8. MODE button: Used for program play of CDs.

9. Cursors, ENTER button: Select the item with the cursors and press ENTER to confirm.

10.

SETUP button: Displays the Setup menu.

11.

VOLUME i/j buttons: Adjust the volume. Adjust between 0 and 50.

12.

SOUND button: Adjust the sound quality.

13.

DIMMER button: Switch the display off or adjust the brightness of the display in three steps.

14.

CLEAR button: Used when entering text, etc.

15.

(NOW PLAYING) button: Switches the information on the

display.

16.

RETURN button: Returns the display to the previous state.

17.

MUTE button: Temporarily mutes audio. Press again to cancel muting.

Supplementary information | Advanced Setup | Others

FLAC

44.1

kHz/24bit

USB Front

Song

Artist Album

















Display

Supplementary information | Advanced Setup | Others

1. The input mode is displayed. (USB Front / USB Rear / CD / Bluetooth / Network / Digital In / Line / Tuner DAB FM)

＊X-HM76D, X-HM86D, XC-HM86D

2. The name of the file, artist, album, station, etc., is displayed.

3. Displays the play status.

4. Displays file format, sampling frequency, and quantization bit information.

5. The file play status is displayed. This may not be displayed depending on the input or file.

6. This is displayed when muting is on.

7. Displayed when the sleep timer is set.

8. Lights in the following conditions.

When the connection setting on the unit is "Wired" and the unit is connected to the network.

When the connection setting on the unit is "Wired" and the unit is not connected to the network.

When the connection setting on the unit is "Wi-Fi" and the unit is connected to the network.

When the connection setting on the unit is "Wi-Fi" and the unit is not connected to the network.

9. If an album jacket is recorded for the file being played, it is displayed here.

＊

/ Tuner

10.

Lights in the following conditions.

: When all track repeat play is on : When one track repeat play is on

: When shuffle play is on

0 When DIMMER is pressed to turn off the display, the unit may appear the same as if you

had unplugged the unit from the power outlet, but electricity is still being supplied to the unit. To completely cut the unit off from the power supply, you need to unplug the power plug (shutoff device) unit from the power outlet.

> Before Start >Part Names > Install > Initial Setup > Playback

E N













Speakers System (X-HM76D, X-HM76)

Supplementary information | Advanced Setup | Others

There is no distinction between left and right with the included speaker system. There will be no difference in sound quality whichever side you choose to put each speaker.

1. Tweeter: Plays the mid range and treble.

2. Woofer: Plays the bass.

3. Grill net fittings: Used to attach the grill nets. When removing the grill net, hold the bottom of the grill net with both hands and pull gently forward, then gently pull the top of the grill out to remove. To attach again, attach the top first, then the bottom.

4. Speaker cabinet

5. Bass ref duct: This releases the reverberations that occur within the cabinet to enhance the reproductive capabilities of the bass range. Do not block the ducts.

6. Speaker terminals: Connect speakers to the main unit with speaker cables.

> Before Start >Part Names > Install > Initial Setup > Playback

E N













Speakers System (X-HM86D)

Supplementary information | Advanced Setup | Others

There is no distinction between left and right with the included speaker system. There will be no difference in sound quality whichever side you choose to put each speaker.

1. Tweeter: Plays the mid range and treble.

2. Woofer: Plays the bass.

4. Speaker cabinet

5. Bass ref duct: This releases the reverberations that occur within the cabinet to enhance the reproductive capabilities of the bass range. Do not block the ducts.

6. Speaker terminals: Connect speakers to the main unit with speaker cables.

> Before Start > Part Names >Install > Initial Setup > Playback

E N

RED

X-HM86D only

Connect the Speakers

Supplementary information | Advanced Setup | Others

When connecting the speaker system for X-HM76D, XHM76 or X-HM86D, connect the included speaker cables with ends with the red tubing attached to the i jacks on the main unit and the speaker. If connection is wrong, the phase reverses and this makes it harder to output bass. For XC-HM86D, use the illustration as a reference to connect your own speakers. After inserting the speaker cables, tighten the terminals firmly by turning to the right. Also make sure the exposed wires of the speakers do not stick out of the speaker terminals when connecting. If the exposed wires of the speakers touch the rear panel or the i and s wires touch each other, the protection circuit may be activated and the power may turn off.

You can also connect a subwoofer with a built-in amplifier to

Install

a Non-Skid pads, b Speaker cable

boost bass playback even more. Use a subwoofer cable for connection.

> Before Start > Part Names >Install > Initial Setup > Playback

E N

1 1

X-HM76D, X-HM86D, XC-HM86D X-HM76

Connecting the antennas and power cord, etc.

Supplementary information | Advanced Setup | Others

Antenna Hookup

Move the antenna around while playing the radio to find the position with the best reception.

Power Cord Hookup

Connect the power cord to the power outlet after completing all other connections.

To connect to the network with an ethernet cable, use the NETWORK jack. When using Wi-Fi connection, make settings in initial settings (ÄP13). You can enjoy features such as internet radio and AirPlay by connecting to the network.

a DAB/FM wire antenna, b Indoor FM antenna, c Power cord

> Before Start > Part Names > Install > Initial Setup >Playback

E N

Initial Setup

Wired (Exit)

Wi-Fi

Selects the method of network connection

Power On & Initial Setup

Initial Setup

Supplementary information | Advanced Setup | Others

Starting up: When you press Í STANDBY/ON, the power

indicator on the main unit slowly blinks blue, then "Hello" is displayed on the display about 20 seconds later. After this, the display goes blank, then after the Pioneer logo is displayed, you can start operating the unit.

BLUEBLINKING

Wi-Fi connection settings

When you first turn the power on, the initial setup screen is displayed automatically, allowing you to easily make Wi-Fi connection settings.

To set, select the item with the cursors on the remote controller and press ENTER to confirm. To return to the previous display, press RETURN.

> Before Start > Part Names > Install > Initial Setup >Playback

E N

Wireless

Input SSID

Use iOS Device

Wireless

ddddddddddddddddd

ccccccccccccccccccc

bbbbbbbbbbbbbbbbb

Wireless

Push Button

Password

Delete One Character[CLEAR]

Change Text[REPEAT]

Supplementary information | Advanced Setup | Others

To make Wi-Fi settings, select "Wi-Fi". If you have connected with an ethernet cable, select "Wired(Exit)" and confirm. If you select "Wi-Fi", select the method for setting in the next screen (for example "Scan Networks").

Scan Networks

0 To redo the initial settings, press SETUP on the remote

controller, select "Wi-Fi" in "Network Setting" "Connection", then select "Wi-Fi Setup".

■Scan Networks

From the list of SSID for access points such as wireless LAN routers, select the required SSID and make the settings.

1. Select the SSID of the access point you want to connect and then confirm.

2. Select either "Enter Password" or "Push Button" and confirm. If the access point has an automatic setting button, by selecting "Push Button" you can connect without entering a password.

aaaaaaaaaaaaaaaa

Enter Password

3. If you select "Enter Password", enter the password of the access point and press ENTER. For details on how to enter text, refer to "Entering text" (ÄP34).

If you select "Push Button", then after pressing and holding the automatic setting button on the access point for the required amount of time, press ENTER on the remote controller.

4. is displayed when the settings are complete.

■Use iOS Device

Set by sharing the iOS device's Wi-Fi settings with this unit.

1. Connect the iOS device by Wi-Fi.

2. Select this device in the "SET UP NEW AIRPLAY SPEAKER..." item on the screen of the iOS device and select "Next".

0 This unit is displayed as "Pioneer HM76D (76 or 86D)

XXXXXX".

3. After establishing the connection, select "Done" on the screen of the iOS device.

4. is displayed on the display of the unit when the settings are complete.

■Enter SSID of the access point

Set by entering the SSID of the access point you want to connect.

1. Enter the SSID. For details on how to enter text, refer to "Entering text" (ÄP34).

SSID

Change Text[REPEAT]

Delete One Character[CLEAR]

2. Select and confirm the authentication method.

Security Method

None

WEP WPA WPA2

0 If you select "None", proceed to step 3. If you select

"WEP", "WPA", or "WPA2", enter the password and confirm.

3. is displayed when the settings are complete.

> Before Start > Part Names > Install > Initial Setup >Playback

E N

Supplementary information | Advanced Setup | Others

> Before Start > Part Names > Install > Initial Setup >Playback

E N

CLOCK

0:00Sun

Time settings

By setting the time, you can use the alarm to start play (ÄP33).

1. Press TIMER.

2. Press ENTER.

3. Set the day of the week with w/x, then press ENTER.

4. In the next screen, use w/x to select either "24H" (24-hour display) or "12H" (12-hour display) and press ENTER.

5. In the next screen, set the time with w/x, then press ENTER.

6. In the next screen, set the minutes with w/x, then press ENTER. Setting ends automatically after a short time.

0 Once you have completed the setting, the set time can be displayed for about 10 seconds

by pressing TIMER.

Supplementary information | Advanced Setup | Others

> Before Start > Part Names > Install > Initial Setup >Playback

E N

Playing CDs

Playback

Supplementary information | Advanced Setup | Others

This unit can also play CD-R recorded with MP3 or WMA format files, along with commercially available music CDs.

0 The supported sampling rates for MP3 files are 8 kHz to

48 kHz, and supported bitrates are between 64 kbps and 384 kbps.

0 The supported sampling rates for WMA files are 32 kHz,

44.1 kHz, and 48 kHz, and supported bitrates are between 64 kbps and 320 kbps.

0 Play of CDs not conforming to the CD standards, such as

copy control CDs, is not guaranteed.

Playing music CDs

1. Turn the unit on.

2. Press CD to change input to CD.

3. Press < on the main unit to open the disc tray.

4. Put the disc on the tray, then press < to close the tray.

5. Press

X/; (a) on the remote controller to start play. Use

other play buttons (b) to stop play or choose tracks to play. If you press (NOW PLAYING) (c), you can switch the display to show the elapsed time or remaining time of the track.

> Before Start > Part Names > Install > Initial Setup >Playback

E N

F019 T159

Supplementary information | Advanced Setup | Others

Playing MP3/WMA discs

1. Turn the unit on.

2. Press CD to change input to CD.

3. Press < on the main unit to open the disc tray.

4. Put the disc on the tray, then press < to close the tray.

5. When reading of the disc is complete, the numbers of folders containing MP3/WMA files and track numbers are displayed.

0 If MP3/WMA files are stored in two or more folders,

each folder is automatically allocated a number.

6. To start play, press X/; (a) on the remote controller. To select a folder to play, press w/x (f) to select the folder. Play starts automatically when you select a folder.

0 Folders that do not contain music files this unit can

play are skipped.

0 A maximum of 255 folders can be read. This includes

folders that contain files this unit cannot play.

Program play (Music CDs)

You can program up to 32 tracks to play.

1. Press MODE (e).

2. The track number (T--) flashes on the display.

PROGRAM

P-01<T--

3. Press

4. Press

:/9 (b) to select the track to register and

press ENTER (g). Repeat this step to register other tracks. The last track in the program is deleted if you press CLEAR (c).

X/; (a) to start play.

0 If you press MODE (e) again while play is stopped, the

entire program is cleared.

0 Shuffle play and 1 track repeat play cannot be used

while playing a program.

Repeat play/Shuffle play

1. Repeatedly press SHUFFLE/REPEAT (d) to display ,

, or on the display. : Repeat play of all tracks. : Repeat play of the selected individual track.

: Play tracks randomly. To cancel repeat or shuffle play, press SHUFFLE/ REPEAT (d) several times until the icons disappear.

> Before Start > Part Names > Install > Initial Setup >Playback

E N

USB Storage Device/HDD

Supplementary information | Advanced Setup | Others

Basic operations

You can play music files by connecting a USB storage device or HDD (hard disk drive) to the USB port on the front or rear of the unit.

0 The USB port on the front supports a maximum 5 V/0.5 A

power supply. If the HDD requires more than this, connect to the USB port (maximum 5 V/1 A) on the rear of the unit.

1. Turn the unit on.

2. Press USB to select either "USB Front" or "USB Rear".

USB Front

USB

No Storage

3. Plug your USB storage device or HDD into the USB port on the front or rear.

4. Folders and music files are displayed on the display when loading is complete.

USB Front

USB

USB Storage

5. Select the folder or music file with the cursors (c) of the remote controller and press ENTER (d) to confirm. To return to the previous display, press RETURN (e).

6. Use play buttons (a) to stop play or choose tracks to play.

0 The display of album name, artist name, and album art is

supported with MP3/WMA/Apple Lossless/FLAC/AAC/

> Before Start > Part Names > Install > Initial Setup >Playback

E N

Supplementary information | Advanced Setup | Others

DSD (DSF only) format music files. The formats for embedded images are JPEG and PNG.

0 Characters that cannot be displayed by this unit appear

as "

0 The USB port of this unit conforms with the USB 2.0

standard. The transfer speed may be insufficient for some content you play, which may cause some interruption in sound.

Repeat/Shuffle

1. Repeatedly press SHUFFLE/REPEAT (b) during play to display , or on the display.

: Repeat play of all tracks.

: Repeat play of the selected individual track.

: Play tracks in a folder randomly. To cancel repeat or shuffle play, press SHUFFLE/ REPEAT (b) several times until the icons disappear.

USB Storage / HDD Device Requirements

0 Note that operation is not guaranteed with all USB

storage devices or HDD.

0 This unit can use USB storage devices that comply with

the USB mass storage device class standard. (However, there are still devices that cannot be played by this unit even if they comply with the USB mass storage class standard.)

0 The unit is also compatible with USB storage devices

using the FAT16 or FAT32 file system formats. Other formats such as exFAT, NTFS, and HFS cannot be played by this unit.

0 If the USB storage device has been partitioned, each

section will be treated as an independent device.

0 Up to 20,000 tracks per folder can be displayed, and

folders may be nested up to 16 levels deep.

0 USB hubs and USB storage devices with hub functions

are not supported. Do not connect these devices to the unit.

0 USB storage devices with security function are not

supported on this unit.

0 If the USB storage device or HDD comes with an AC

adapter, we recommend that you use its AC adapter to power it.

0 Media inserted to the USB card reader may not be

available in this function. Furthermore, depending on the USB storage device, proper reading of the contents may not be possible.

0 We accept no responsibility whatsoever for the loss or

damage to data stored on a USB storage device when that device is used with this unit. We recommend that you back up your important music files beforehand.

Supported Audio Formats

For server playback and playback from a USB storage device, this unit supports the following music file formats. Note that sound files that are protected by copyright cannot be played on this unit.

MP3 (.mp3/.MP3):

0 Supported formats: MPEG-1/MPEG-2 Audio Layer 3 0 Supported sampling rates: 44.1 kHz, 48 kHz 0 Supported bitrates: Between 8 kbps and 320 kbps and

VBR.

WMA (.wma/.WMA):

0 Supported sampling rates: 44.1 kHz, 48 kHz 0 Supported bitrates: Between 5 kbps and 320 kbps and

VBR.

0 WMA Pro/Voice/WMA Lossless formats are not

supported

WAV (.wav/.WAV):

WAV files include uncompressed PCM digital audio.

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 8 bit, 16 bit, 24 bit

AIFF (.aiff/.aif/.aifc/.afc/.AIFF/.AIF/.AIFC/.AFC):

AIFF files include uncompressed PCM digital audio.

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 8 bit, 16 bit, 24 bit

AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/.MP4/.3GP/ .3G2):

0 Supported formats: MPEG-2/MPEG-4 Audio 0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz

0 Supported bitrates: Between 8 kbps and 320 kbps and

VBR.

FLAC (.flac/.FLAC):

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 8 bit, 16 bit, 24 bit

Apple Lossless (.m4a/.mp4/.M4A/.MP4):

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 16 bit, 24 bit

DSD (.dsf/.dff/.DSF/.DFF):

0 Supported formats: DSF/DSDIFF 0 Supported sampling rates: 2.8 MHz, 5.6 MHz, 11.2 MHz

> Before Start > Part Names > Install > Initial Setup >Playback

E N

Network

TIDAL

Deezer

Spotify

TuneIn Radio

Internet Radio

Basic operations

When this unit is connected to a network, you can listen to TuneIn or other preregistered Internet radio services. Depending on the internet radio service, the user may need to register from their computer first.

1. Turn the unit on.

2. Press NETWORK.

3. Select "TuneIn Radio" with the cursors (a) of the remote controller and press ENTER (b) to confirm. After switching the display to the internet radio service, you can select stations with the cursors (a) on the remote controller and press ENTER (b) to confirm. To return to the previous display, press RETURN (c).

Supplementary information | Advanced Setup | Others

TuneIn

You can register a station you have played as a favorite.

1. Press ENTER (b) while playing TuneIn.

2. Select "Add to My Presets" on the display and confirm.

3. To play a favorite, in the top screen of TuneIn, select the registered station in "My Presets" and confirm. To delete favorites, press ENTER (b) during play, select "Remove from My Presets" and confirm.

> Before Start > Part Names > Install > Initial Setup >Playback

E N

Wi-Fi

PioneerHMXXxxxxxx

Spotify

Supplementary information | Advanced Setup | Others

Basic Operation

Spotify Connect play is possible by connecting this unit to the same network as a smart phone or tablet. To enable Spotify Connect, install the Spotify application on your smartphone or tablet and create a Spotify premium account.

1. Connect the smartphone to the network that this unit is connected to.

2. Click the Connect icon in the track play screen of the Spotify app.

3. Select this unit.

0 This unit is displayed as "Pioneer HM76D (76 or 86D)

XXXXXX"

4. This unit turns on automatically and the input selector changes to NETWORK and streaming of Spotify starts.

0 If "Option Setting" - "Power Off Setting" - "Network

Standby" is set to "Off" in the Setup menu, manually turn the unit on and then press NETWORK on the remote controller.

0 Refer to the following for Spotify settings:

www.spotify.com/connect/

0 The Spotify software is subject to third party licenses

found here: www.spotify.com/connect/third-party-licenses

The following remote controller operations are also possible. (a) Pressed during play this button pauses playback.

Pressed while paused, and it restarts play. (b) This button plays the previous track. (c) This button plays the next track. (d) Start Repeat or Shuffle play. Pressing this button

repeatedly cycles through the repeat/shuffle modes.

> Before Start > Part Names > Install > Initial Setup >Playback

E N

87.50

MHz

AUTO

Tuner FM

Listening to the FM Radio

Supplementary information | Advanced Setup | Others

Tuning Automatically

1. Turn the unit on.

2. Repeatedly press TUNER to switch input to Tuner FM.

3. When you press TUNE i/j (b) on the remote controller, automatic tuning starts, and searching stops when a station is found. "Tuned Stereo" or "Tuned Mono" is displayed when FM stations are being received.

When FM broadcasts are difficult to receive: Perform the procedure for "Tuning Manually". If the "Tuning Mode" is set to "Manual", the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception.

Tuning Manually

You will need to change the initial settings. Press SETUP (h) on the remote controller and select "Option Setting" "Tuner Setting" - "Tuning Mode" - "Manual" on the display and confirm. Press SETUP (h) to finish the settings.

1. Turn the unit on.

2. Repeatedly press TUNER to switch input to Tuner FM.

> Before Start > Part Names > Install > Initial Setup >Playback

E N

Tuner FM

87.50

MHz

87.50

MHz

Tuner FM

P01

Supplementary information | Advanced Setup | Others

3. Select the station you want to listen to while pressing TUNE i/j (b) on the remote controller.

0 The frequency changes by 1 step each time you press

the button. The frequency changes continuously if the button is held down and stops when the button is released. Tune by looking at the display.

Registering a station

You can register a maximum of 40 stations.

1. Tune into the radio station you want to register.

2. Press MEMORY (c) on the remote controller so that the preset number on the display flashes.

3. While the preset number is flashing (about 8 seconds), repeatedly press PRESET i/j (a) on the remote controller to select a number between 1 and 40.

4. Press MEMORY (c) on the remote controller again to register the station. When registered, the preset number stops flashing.

Selecting registered stations

1. Repeatedly press TUNER to switch input to Tuner FM.

2. Press PRESET i/j (a) on the remote controller to select a preset number.

To delete a registered station

1. Repeatedly press TUNER to switch input to Tuner FM.

2. Press PRESET i/j (a) on the remote controller to select the preset number you want to delete.

3. Press CLEAR (d) on the remote controller to delete the preset number.

To give a name to a registered station

1. Repeatedly press TUNER to switch input to Tuner FM.

2. Press PRESET i/j (a) on the remote controller to select a preset number.

3. Press SETUP (h) on the remote controller.

4. Press y/z (f) on the remote controller to select "Option Setting" - "Tuner Setting" - "Preset Name" and press ENTER (g).

5. Enter a name for the station. For details on how to enter text, refer to " Entering text" (ÄP34).

Using RDS

RDS stands for Radio Data System and is a method of transmitting data in FM radio signals. In regions using RDS, the radio station name is displayed when you tune into a radio station broadcasting program information. When you press MODE (e) on the remote controller in this state, you can use the following functions.

Displaying text information (Radio Text)

1. While the name of the station is being displayed on the display, press MODE (e) on the remote controller once. Radio Text (RT) broadcast by the station is displayed scrolling across the display. "Not RDS" is displayed when no text information is available.

0 Unusual characters may be displayed when the unit

receives unsupported characters. However, this is not a malfunction. Also, if the signal from a station is weak, information may not be displayed.

Search for stations by Program Type

1. While the name of the station is being displayed on the display, press MODE (e) on the remote controller twice.

2. Press the PRESET i/j (a) on the remote controller to select the Program Type you want to find, then press ENTER (g) to start the search. The Program Types displayed are as follows: None News (News reports) Current affair Information Sport Education Drama Cultures Science (Science and technology) Varied speech Pop music Rock music Easy listening Light classics Serious classi (Serious classics) Other music Weather & metr Finance Children's pro (Children's programmes) Social affairs Religion Phone in Travel & touri Leisure & hobb Jazz music Country music Nation music Oldies music

> Before Start > Part Names > Install > Initial Setup >Playback

E N

Folk music Documentary

0 The information displayed may sometimes not match

the content being broadcast by the station.

3. "FINISH" is displayed when a station is found and the frequency display flashes. Press ENTER (g) while this is happening to start receiving that station. If you don't press ENTER (g), the unit continues to search for another station.

0 If no stations are found, the message "Not Found" is

displayed.

0 Unusual characters may be displayed when the unit

receives unsupported characters. However, this is not a malfunction. Also, if the signal from a station is weak, information may not be displayed.

Supplementary information | Advanced Setup | Others

> Before Start > Part Names > Install > Initial Setup >Playback

E N

Scan: 100%

Tuner DAB

News

ABCD-Station

Tuner DAB

Listening to DAB Digital Radio (X-HM76D, X-HM86D, XC-HM86D)

Tuning

1. Turn the unit on.

2. Repeatedly press TUNER to switch input to Tuner DAB. 0 The very first time you select Tuner DAB, the Auto

Tuning function automatically scans the DAB Band 3 for the multiplexes (i.e., stations) available in your area.

0 Once the scanning process is complete, the first

station that was detected is selected.

0 If a new DAB station is introduced, or you move to a

new area, press SETUP on the remote controller, then use "DAB Scan" in "Option Setting" - "Tuner Setting".

3. Select the desired radio station with the cursors (c) on

the remote controller.

Supplementary information | Advanced Setup | Others

DLS (Dynamic Label Segment) : When tuned to a

station that's broadcasting DLS text data, the text will scroll across the display.

Program Type : Displays the type of program. Bit Rate and Audio Mode : Displays the station's bit rate

and audio mode (Stereo, Mono). Quality : Displays the signal quality. 0 - 59: Poor reception 60 - 79: Good reception 80 - 100: Excellent reception Multiplex Name : Displays the name of the current multiplex. Multiplex Number and Frequency : Displays the number and frequency of the current multiplex.

Changing the order stations are displayed

You can sort the abailable stations alphabetically or by multiplex.

1. Press MODE (a) repeatedly to set the method for sorting

the display order from the following.

Alphabet (default setting) : Sort stations alphabetically. Multiplex : Sort stations by multiplex.

Displaying DAB Radio Information

1. Press the (NOW PLAYING) button (b) repeatedly to

display more information about the selected DAB station.

> Before Start > Part Names > Install > Initial Setup >Playback

E N

PioneerHMXXxxxxxx

Playing BackPairing

Supplementary information | Advanced Setup | Others

BLUETOOTH

Pairing

Turn the unit on

2. When you press the button on the remote controller, "Now Pairing... " is displayed on the display, and the pairing mode is enabled.

Enable (turn on) the BLUETOOTH function of the BLUETOOTH enabled device, then select this unit from amongst the devices displayed. If a password is requested, enter "0000".

0 This unit is displayed as "Pioneer HM76D (76 or 86D)

XXXXXX".

4. "Now Pairing... " on the display changes to the name of the BLUETOOTH enabled device.

0 To connect another BLUETOOTH enabled device, press

and hold the button until "Now Pairing... " is displayed, then perform step 3 above. This unit can store the data of up to eight paired devices.

0 The coverage area is 10 meters. Note that connection is

not always guaranteed with all BLUETOOTH enabled devices.

Bluetooth

Now Pairing...

--:--:--/--:--:--

Playing Back

Turn the unit on

2. Perform the connection procedure on the BLUETOOTH enabled device.

3. The input selector on this unit automatically switches to "Bluetooth".

> Before Start > Part Names > Install > Initial Setup >Playback

E N

4. Play the music files. Increase the volume of the BLUETOOTH enabled device to an appropriate level.

0 Due to the characteristics of BLUETOOTH wireless

technology, the sound produced on this unit may slightly be behind the sound played on the BLUETOOTH enabled device.

Supplementary information | Advanced Setup | Others

> Before Start > Part Names > Install > Initial Setup >Playback

E N

PioneerHMXX

iPhone

Supplementary information | Advanced Setup | Others

AirPlay

Wi-Fi

Basic Operation

You can wirelessly enjoy the music files on an iPhone®, iPod touch as this unit. Update the OS version on your iOS device to the latest version.

1. Turn the unit on.

2. Connect the iOS device to the same network as this unit.

3. Tap the AirPlay icon in the control center of the iOS

4. Play the music files on the iOS device.

0 In the Setup menu displayed by pressing SETUP on the

0 Due to the characteristics of AirPlay wireless technology,

0 SHUFFLE/REPEAT on the remote controller does not

You can also play the music files on a computer with iTunes (Ver. 10.2.2 or later). Make sure this unit and the computer are connected to the same network, click the AirPlay icon

displayed, and start play of a music file.

, or iPad® connected to the same access point

device and select this unit from the list of devices displayed, and tap "Done".

0 This unit is displayed as "Pioneer HM76D (76 or 86D)

XXXXXX".

0 If an "AirPlay Password" has been set on this unit,

enter the password you set.

remote controller, when "Option Setting" Setting" - "Network Standby" is set to "On", when play of AirPlay starts, this unit turns on automatically and play starts.

the sound produced on this unit may slightly be behind the sound played on the AirPlay-enabled device.

work. Operate from the iOS device.

in iTunes, select this unit from the list of devices

- "Power Off

+ 307 hidden pages