Page 1
DDJ-SP1
TRAKTOR PRO 2
Settings File Import Guide
0
Page 2
Before start (Important)
Pioneer provides a settings file (TSI file) exclusively for use with the
Native Instruments “TRAKTOR PRO 2” DJ software. TRAKTOR PRO 2
can be controlled from this unit if this file is imported to your
computer.
・A computer on which TRAKTOR PRO 2 is installed is required.
・Not all functions of TRAKTOR PRO 2 are supported.
Users should make their own settings as necessary.
・To make additional settings, see the TRAKTOR 2 operating
manual (PDF file) included with TRAKTOR PRO 2.
・To operate TRAKTOR PRO 2 by using this unit’s buttons and knobs,
see the separate “DDJ-SP1 Hardware Diagram for TRAKTOR PRO 2”
(PDF file) of supported functions.
・There are two methods to import this settings file. If you have
imported the settings file by method from step 9 to step 12 in the
chapter of “Importing a settings file”, press the [ROLL] button or
[SLICER] button on this unit before use. Suitable effects will be set
in effect units. When you have imported the settings file by
method from step 7 to step 8, you do not have to press the above
buttons.
・In this settings file, Deck A/B are assigned to the Track Deck and
Deck C/D are assigned to the Remix Deck. Modifications to other
settings are not recommended.
Cautions:
・TRAKTOR PRO 2 is a product of Native Instruments.
Pioneer is not in the position of answering any inquiries on the
usage of TRAKTOR PRO 2. Please refer to the Operation
Manual of TRAKTOR 2 or other resources.
General Disclaimer
・Pioneer will accept no responsibility whatsoever for damages
resulting from downloading or installing this settings file.
Operation of this settings file is not guaranteed.
・Users should take full responsibility for downloading, installing
and using this settings file.
・The specifications of this settings file are subject to change
without notice.
・Please note that services regarding this settings file may be
terminated without notice.
Backing up the current settings file
We recommend backing up the current setting file using the
procedure below so that the current settings can be restored if
necessary.
・The users who use TRAKTOR PRO 2 for the first time should skip
this process.
1. Select (Preference) in the upper right of the
screen.
2. On the [Preferences] window, click [Export].
3. Check the items to be backed up, then click [OK].
Save the file with an easily identifiable name (e.g. BackUp.tsi) in a
desired location.
1
Page 3
Importing a settings file
Cautions
If another settings file has already been imported, this procedure
may not work properly. If so, delete the imported settings file
before you start this procedure. For details, see “Deleting the
settings file” on page 4.
1. Access the Pioneer support web site
(http://www.pioneerdj.com/support/
“Software Download” of DDJ-SP1 to download the
settings file.
The downloaded file is compressed in ZIP format. Unzip it before
starting.
— For Windows users
Right-click the downloaded file and select [Extract All]. The unzip
wizard appears. Specify the folder in which the file is to be
unzipped and unzip (decompress) it.
— For Mac OS X users
Double-click the downloaded ZIP file to unzip it.
When unzipped, a file named [PIONEER_DDJ-SP1_Vxxx.tsi] is
extracted.
! Depending on the browser you are using, the file may be
unzipped automatically. If so, you can skip the above process.
2. Save the [PIONEER_DDJ-SP1_Vxxx.tsi] file
downloaded in step 1 in the desired location.
Example:
・For Windows
My Documents¥Native Instruments¥Traktor 2.x.x¥Settings
・For Mac OS X
~/Documents/Native Instruments/Traktor 2.x.x/Settings
3. Connect DDJ-SP1 and a computer using the USB
cable.
4. Select “DJ software other than Serato DJ” in the
utilities mode of DDJ-SP1.
To change the setting in the utilities mode, see the chapter of
“Changing this unit’s settings” in DDJ-SP1’s Operating Instructions
(Advanced Edition).
5. Launch TRAKTOR PRO 2.
6. Select （Preferences）in the upper right of the
screen.
) and click
7. I f you use only this unit a s M IDI device connected to
TRAKTOR PRO 2, click [Import] on the [Preferences]
window.
Select the [PIONEER_DDJ-SP1_Vxxx.tsi] file saved in step 2.
* If you want to connect other MIDI devices in addition to DDJ-SP1
to TRAKTOR PRO 2, proceed to Step 9.
8. Click [OK] to load the settings file.
Proceed to step 13 after loading the settings file.
2
Page 4
9. If you want to connect other MIDI devices in
addition to DDJ-SP1 to TRAKTOR PRO 2, select
[Controller Manager] on the [Preferences] window.
* If you use only this unit as a MIDI device connected to TRAKTOR
PRO 2, please skip from step 9 to step 12.
11. On the [Preferences] window, select [Decks
Layout].
Select “Track Deck” for [A] and [B] in [Deck Flavor] and “Remix Deck”
for [C] and [D]. Tick [Show C & D] in [Deck Layout].
10. Click [Add…] button and select [Import].
Select the [PIONEER_DDJ-SP1_Vxxx.tsi] file saved in step 2.
12. Select [Effects] on the [Preferences] window.
Select “4 FX Units” in [FX Unit Routing]. Select “Group” for [FX 1], [FX
2], and [FX 3] in [FX Panel mode] and select “Single” for [FX 4].
3
Page 5
13. Check the [Device] in the [Controller Manager].
Check the following 9 devices are displayed.
･ Inst_FX_Sel – Generic MIDI ･ Inst_FX [A] – Generic MIDI
･ Inst_FX [B] – Generic MIDI ･ Inst_FX [C] – Generic MIDI
･ Inst_FX [D] – Generic MIDI ･ Inst_FX [E] – Generic MIDI
･ PIONEER DDJ-SP1 – Generic MIDI
･ Remix Deck C – Generic MIDI ･ Remix Deck D – Generic MIDI
15. Click [Close] to close the [Preferences] window.
Now, all the settings are completed.
Deleting the settings file
1. Select [Controller Manager] on the [Preferences]
window.
2. Select the device to be deleted from [Device] and
click [Edit...] to select [Delete].
Repeat this process until “None” is shown in [Device].
14. Set [In-Port] and [Out-Port] in the [Controller
Manager].
For all the devices which has been checked in step 13, select
DDJ-SP1 for both [In-Port] and [Out-Port].
About trademarks and registered
Trademarks
・ Pioneer is a registered trademark of PIONEER CORPORATION.
・ TRAKTOR is a registered trademark of Native Instruments.
・ Windows
Microsoft Corporation in the United States and/or other
countries.
・ Mac OS is a trademark of Apple Inc., registered in the U.S. and
other countries.
・ The names of companies, products and technologies in this
Guide are registered trademarks or trademarks of each
company.
©2013 PIONEER CORPORATION
All rights reserved
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031,
Japan
®
is either registered trademarks or trademarks of
4
Loading...