Pioneer DDJ-SB User Manual [en, de, fr, it]
DJ Controller
Contrôleur pour DJ
DDJ-SB
DJ Controller
DJ Controller
DJ Controller
http://pioneerdj.com/support/
http://serato.com/
The Pioneer DJ support site shown above offers FAQs, information on software and various other types of
information and services to allow you to use your product in greater comfort.
The contents of the warranty for the United States and Canada are provided on the last pages of the
instructions in English and French.
For the latest version of the
Le site de support DJ de Pioneer indiqué ci-dessus propose une FAQ, des informations sur le logiciel et divers
types d’informations et de services qui permettent une utilisation plus confortable de ce produit.
Le contenu de la garantie pour les États-Unis et le Canada se trouvent aux dernières pages des
modes d’emploi anglais et français.
Pour la toute dernière version du logiciel Serato DJ Intro, accédez à Serato.com et téléchargez le logiciel de ce site.
Die oben gezeigte Pioneer DJ-Support-Website enthält häufig gestellte Fragen, Informationen über Software
und andere wichtige Informationen und Dienste, die Ihnen helfen, Ihr Produkt optimal zu verwenden.
Für die neueste Version der Serato DJ Intro-Software gehen Sie zu Serato.com und laden die Software von dort herunter.
Il sito di supporto DJ Pioneer indicato qui sopra offre una sezione FAQ, informazioni sul software ed
informazioni e servizi di vario tipo, per permettere un uso più confortevole dei nostri prodotti.
Per ottenere la più recente versione di
De bovengenoemde Pioneer DJ ondersteuningswebsite biedt een overzicht van de vaak gestelde vragen,
informatie over software en allerlei andere soorten informatie en diensten die u in staat stellen dit product met
meer gemak te gebruiken.
Ga voor de nieuwste versie van de Serato DJ Intro-software naar Serato.com en download de software van deze site.
Serato DJ Intro
Serato DJ Intro
software, access Serato.com and download the software from there.
, raggiungere Serato.com e scaricare il software di lì.
Français Deutsch ItalianoEnglish Nederlands
Read Before Use (Important)/Quick Start Guide
A lire avant l’utilisation (Important)/Guide de démarrage rapide
Vor Gebrauch lesen (wichtig)/Kurzanleitung
Da leggere prima dell’uso (Importante)/Guida di avvio veloce
Lees dit voor gebruik (Belangrijk)/Snelstartgids
WARNING
This equipment is not waterproof. To prevent a fire or
For other areas
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light).
For Europe and other areas
CAUTION
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
For Europe
Private households in the member states of the EU, in Switzerland
and Norway may return their used electronic products free of
charge to designated collection facilities or to a retailer (if you
purchase a similar new one).
For countries not mentioned above, please contact your local
authorities for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes
the necessary treatment, recovery and recycling and thus prevent
potential negative effects on the environment and human health.
D3-4-2-1-3_A1_En
D3-4-2-1-7a_A1_En
D3-4-2-1-7c*_A2_En
When using this product, confirm the safety
information shown on the bottom of the unit.
D3-4-2-2-4_B1_En
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period.
K041_A1_En
D3-4-2-1-1_B1_En
This product satisfies electromagnetic noise
regulations when it is connected to other equipment
through shielded cables and connectors.
Use only the furnished accessory connecting cables.
D44-8-2_A1_En
If you want to dispose this product, do not mix it with
general household waste. There is a separate collection
system for used electronic products in accordance with
legislation that requires proper treatment, recovery and
recycling.
K058b_A1_En
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment
and receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV
technician for help.
For U.S.A. and other areas
Information to User
Alterations or modifications carried out without
appropriate authorization may invalidate the user’s
right to operate the equipment.
CAUTION
This product satisfies FCC regulations when shielded
cables and connectors are used to connect the unit
to other equipment. To prevent electromagnetic
interference with electric appliances such as radios
and televisions, use shielded cables and connectors
for connections.
FEDERAL COMMUNICATIONS COMMISSION
DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Product Name: DJ Controller
Model Number: DDJ-SB
Responsible Party Name:
PIONEER ELECTRONICS (USA) INC.
SERVICE SUPPORT DIVISION
Address: 1925 E. DOMINGUEZ ST. LONG BEACH,
CA 90810-1003, U.S.A.
Phone: 1-800-421-1404
URL: http://www.pioneerelectronics.com
D8-10-1-2_A1_En
D8-10-2_A1_En
D8-10-3a_A1_En
D8-10-4*_C1_En
En
2
For U.S.A.
For U.S.A. and Canada
IMPORTANT
The Safety of Y
Get the most out of your equipment by playing it at a
safe level – a level that lets the sound come through
clearly without annoying blaring or distortion and, most
importantly
Sound can be deceiving. Over time, your hearing
“comfort level” adapts to higher volumes of sound, so
what sounds “normal” can actually be loud and
harmful to your hearing. Guard against this by setting
your equipment at a safe level BEFORE your hearing
adapts
EST
•
•
•
BE SURE TO OBSER
GUIDELINES:
•
•
•
English
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
D3-4-2-1-1b_A1_En
our Ears is in Your Hands
Set your volume control at a low setting.
Slowly increase the sound until you can hear it
comfortably and clearly, without distortion.
Once you have established a comfortable sound
level, set the dial and leave it there.
Do not turn up the volume so high that you can’t
hear what’s around you.
Use caution or temporarily discontinue use in
potentially hazardous situations.
Do not use headphones while operating a motorized
vehicle; the use of headphones may create a traffic
hazard and is illegal in many areas.
, without affecting your sensitive hearing.
.
ABLISH A SAFE LEVEL:
VE THE FOLLOWING
S001a_A1_En
Read these instructions.
1)
Keep these instructions.
2)
Heed all warnings.
3)
Follow all instructions.
4)
Do not use this apparatus near water.
5)
Clean only with dry cloth.
6)
Do not block any ventilation openings. Install in
7)
accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as
8)
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the polarized
9)
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or
10)
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11)
Only use attachments/accessories specified by
the manufacturer.
12)
Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13)
Unplug this apparatus during lightning storms
or when unused for long periods of time.
14)
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
IMPORTANT NOTICE
THE MODEL NUMBER AND SERIAL NUMBER OF
THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.
RECORD THESE NUMBERS ON PAGE 14 FOR
FUTURE REFERENCE.
D3-7-13-69_En
D36-AP9-3*_A1_En
En
3
Before start
How to read this manual
! Thank you for buying this Pioneer product.
Be sure to read both this leaflet and the operating instructions! Both
documents include important information that you must understand
before using this product.
After you have finished reading the instructions, put them away in a
safe place for future reference.
— For instructions on acquiring the operating instructions, see
Acquiring the manual (p. 12).
! In this manual, names of screens and menus displayed on the prod-
uct and on the computer screen, as well as names of buttons and
terminals, etc., are indicated within brackets. (e.g.: [CUE] button,
[Files] panel, [MIC] terminal)
! Please note that the screens and specifications of the software
described in this manual as well as the external appearance and
specifications of the hardware are currently under development and
may differ from the final specifications.
! Please note that depending on the operating system version, web
browser settings, etc., operation may differ from the procedures
described in this manual.
Features
This unit is an all-in-one DJ system combining Pioneer DJ units that
have earned a high reputation among professional DJs for their high
operability with the “Serato DJ Intro” DJ software from Serato.
This unit is equipped with a large body and “Big Jog” dials optimum for
scratching as well as performance pads allowing tracks to be arranged
with such dynamic actions as tapping and rolling, so that the various
functions of Serato DJ Intro can be operated intuitively and accurately.
There is also a built-in sound card (audio interface), eliminating the need
for complex wiring and settings so that users can start making DJ performances immediately.
What’s in the box
! CD-ROM (Installation Disc)
! USB cable
! Warranty (for some regions)
! Read Before Use (Important)/Quick Start Guide (this document)
1 The included warranty is for the European region.
— For the North American region, the corresponding information is
provided on the last page of both the English and French versions
of the “Read Before Use (Important)/Quick Start Guide”.
— For the Japanese region, the corresponding information is
provided on the last page of the Japanese version of the “Read
Before Use (Important)/Quick Start Guide”.
1
About the driver software (Windows)
This driver software is an exclusive ASIO driver for outputting audio
signals from the computer.
! There is no need to install the driver software when using Mac OS X.
Checking the latest information on the driver software
For detailed information on this unit’s designated driver software, see
the Pioneer DJ support site below.
http://pioneerdj.com/support/
About the Serato DJ Intro software
Serato DJ Intro is a DJ software application by Serato. DJ performances
are possible by connecting the computer on which this software is
installed to this unit.
Minimum operating environment
Supported operating
systems
Mac OS X: 10.8, 10.7 and
10.6
Windows: Windows 7 (SP1)
and Windows Vista (SP1)
Others
Optical drive Optical disc drive on which the CD-ROM can be read
USB port
Display resolution Resolution of 1 024 x 768 or greater
Internet connection
! For the latest information on the required operating environment and compat-
ibility as well as to acquire the latest operating system, refer to “Software Info”
under “DDJ-SB” on the Pioneer DJ support site below.
http://pioneerdj.com/support/
! Operating System support assumes you are using the latest point release for
that version.
! Operation is not guaranteed on all computers, even if all the required operating
environment conditions indicated here are fulfilled.
! Depending on the computer’s power-saving settings, etc., the CPU and hard
disk may not provide sufficient processing capabilities. For notebook comput-
ers in particular, make sure the computer is in the proper conditions to provide
constant high performance (for example by keeping the AC power connected)
when using Serato DJ Intro.
! Use of the Internet requires a separate contract with a provider offering Internet
services and payment of provider fees.
CPU and required memory
®
Intel
processor, Core™ Duo 1.6 GHz or better
1 GB or more of RAM
®
Intel
processor, Core™ 2 Duo 2.0 GHz or better
1 GB or more of RAM
A USB 2.0 port is required to connect the computer
with this unit.
An Internet connection is required for registering
the “Serato.com” user account and downloading the
software.
Installing the software
Before installing the software
For the latest version of the Serato DJ Intro software, access Serato.
com and download the software from there. A software download link
is also provided on the included CD-ROM.
! For details, refer to Installation Procedure (Windows) or Installation
procedure (Mac OS X).
! The user is responsible for preparing the computer, network
devices and other elements of the Internet usage environment
required for a connection to the Internet.
En
4
About the installation procedure
The installation procedure depends on the operating system (OS) on the
computer you are using.
For Windows
After installing the driver software, install the Serato DJ Intro software.
For Mac OS X
Only install the Serato DJ Intro software.
Installation Procedure (Windows)
Do not connect this unit and the computer until installation is
completed.
! Log on as the user which was set as the computer’s administrator
before installing.
! If any other programs are running on the computer, quit them.
1 Insert the CD-ROM into the computer’s optical drive.
The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear when the CD-ROM is inserted,
open the optical drive from [Computer (or My Computer)] in the
[Start] menu, then double-click the [CD_menu.exe] icon.
2 When the CD-ROM menu appears, select [Install
Driver Software (Pioneer_DDJ_SB_Driver_x.xxx.exe)],
then click [Start].
! To close the CD-ROM menu, click [Exit].
3 Proceed with installation according to the instructions
on the screen.
If [Windows Security] appears on the screen while the installation is
in progress, click [Install this driver software anyway] and continue
with the installation.
When the installation program is completed, a completion message
appears.
After installing the driver software, install the Serato DJ Intro software.
4 Select [Download Serato DJ Intro Software] from the
CD-ROM’s menu, then click [Start].
5 “An internet environment is required to access the
site. Connected to the internet?” is displayed. Click [Yes].
The web browser is launched and the Pioneer DJ support site is
displayed.
6 Click [Software Info] under [DDJ-SB] on the Pioneer DJ
support site.
7 Click the link to the Serato DJ Intro download page.
The Serato DJ Intro download page is displayed.
8 Log in to your “Serato.com” user account.
! If you have already registered a user account on “Serato.com”, pro-
ceed to step 10.
! If you have not completed registering your user account, do so fol-
lowing the procedure below.
— Following the instructions on the screen, input your e-mail
address and the password you want to set, then select the region
in which you live.
— If you check [E-mail me Serato newsletters], newsletters pro-
viding the latest information on Serato products will be sent from
Serato.
— Once user account registration is completed, you will receive an
e-mail at the e-mail address you have input. Check the contents
of the e-mail sent from “Serato.com”.
! Be careful not to forget the e-mail address and password specified
when you performed user registration. They will be required for
updating the software.
! The personal information input when registering a new user account
may be collected, processed and used based on the privacy policy on
the Serato website.
9 Click the link in the e-mail message sent from “Serato.
com”.
This takes you to the Serato DJ Intro download page. Proceed to step 11.
10 Log in.
Input the e-mail address and password you have registered to log in to
“Serato.com”.
11 Download the Serato DJ Intro software from the
download page.
Unzip the downloaded file, then double-click the unzipped file to launch
the installer.
12 Read the terms of the license agreement carefully,
and if you agree, select [I accept the agreement], then
click [Next].
! If you do not agree to the contents of the license agreement, click
[Cancel] to cancel installation.
Installation begins.
The message of successful installation appears once installation is
completed.
13 Click [Finish] to quit the Serato DJ Intro installer.
Installation procedure (Mac OS X)
Do not connect this unit and the computer until installation is
completed.
! If any other programs are running on the computer, quit them.
1 Insert the CD-ROM into the computer’s optical drive.
The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear on the screen when the
CD-ROM is inserted, open the optical driver from Finder, then double-click the [CD_menu.app] icon.
2 Select [Download Serato DJ Intro Software] from the
CD-ROM’s menu, then click [Start].
3 “An internet environment is required to access the
site. Connected to the internet?” is displayed. Click [Yes].
The web browser is launched and the Pioneer DJ support site is
displayed.
4 Click [Software Info] under [DDJ-SB] on the Pioneer DJ
support site.
5 Click the link to the Serato DJ Intro download page.
The Serato DJ Intro download page is displayed.
English
En
5
6 Log in to your “Serato.com” user account.
! If you have already registered a user account on “Serato.com”, pro-
ceed to step 8.
! If you have not completed registering your user account, do so fol-
lowing the procedure below.
— Following the instructions on the screen, input your e-mail
address and the password you want to set, then select the region
in which you live.
— If you check [E-mail me Serato newsletters], newsletters pro-
viding the latest information on Serato products will be sent from
Serato.
— Once user account registration is completed, you will receive an
e-mail at the e-mail address you have input. Check the contents
of the e-mail sent from “Serato.com”.
! Be careful not to forget the e-mail address and password specified
when you performed user registration. They will be required for
updating the software.
! The personal information input when registering a new user account
may be collected, processed and used based on the privacy policy on
the Serato website.
7 Click the link in the e-mail message sent from “Serato.
com”.
This takes you to the Serato DJ Intro download page. Proceed to step 9.
8 Log in.
Input the e-mail address and password you have registered to log in to
“Serato.com”.
9 Download the Serato DJ Intro software from the
download page.
Unzip the downloaded file, then double-click the unzipped file to launch
the installer.
10 Read the terms of the license agreement carefully,
and if you agree, click [Agree].
Operation
Always disconnect the USB cable before making or changing equipment
connections.
Be sure to use the USB cable included with this product.
Refer to the operating instructions for the component to be connected.
With this unit, the power is supplied by USB bus power. The unit can be
used simply by connecting it to a computer using the USB cable.
! Connect the computer to which this unit is to be connected to an AC
power supply.
! A USB hub cannot be used.
! In cases like the ones below, the power may be insufficient and this
unit may not operate on USB bus power.
— When the computer’s USB power supply capacity is insufficient.
— When other USB devices are connected to the computer.
— When headphones with an impedance of less than 32 W are
connected.
— When headphones are simultaneously connected to the stereo
phone jack and the stereo mini-phone jack.
— When a monaural jack is connected to the [HEADPHONES]
terminal.
Connections
MASTER OUT
USB
Computer
RL
Power amplifier,
L
R
powered speakers, etc.
! If you do not agree to the contents of the usage agreement, click
[Disagree] to cancel installation.
11 If the following screen appears, drag and drop the
[Serato DJ Intro] icon on the [Applications] folder icon.
0
Headphones
1 Connect headphones to one of the [HEADPHONES]
terminals.
2 Connect such devices as a power amplifier, powered
speakers, etc., to the [MASTER OUT] terminals.
! For details on connecting the input/output terminals, see the
Operating Instructions.
3 Turn on the computer’s power.
4 Connect this unit to your computer via a USB cable.
! For Windows users
The message [Installing device driver software] may appear when
this unit is first connected to the computer or when it is connected to
a different USB port on the computer. Wait a while until the message
[Your devices are ready for use] appears.
5 Turn on the power of the devices connected to the
output terminals (power amplifier, powered speakers,
etc.).
! When a microphone is connected to input terminals, the power of
the microphone also turns on.
En
6
Starting the system
A
C
AA
C
B
Launching Serato DJ Intro
For Windows
From the Windows [Start] menu, click the [Serato DJ Intro] icon under [All Programs] > [Serato] > [DJ Intro].
For Mac OS X
In Finder, open the [Applications] folder, then click the [Serato DJ Intro] icon.
Computer screen directly after the Serato DJ Intro software is launched
Computer screen when a track is loaded in the Serato DJ Intro software
English
A Deck section
The track information (the name of the loaded track, artist name, BPM, etc.), the overall waveform and other information is displayed here.
B Waveform display
The loaded track’s waveform is displayed here.
C Browser section
Crates in which tracks in the library or sets of multiple tracks are stored are displayed here.
This manual consists mainly of explanations of functions of this unit as hardware. For detailed instructions on operating the Serato DJ Intro software,
see the Serato DJ Intro software manual.
En
7
Importing tracks
a
b
a
b
The following describes the typical procedure for importing tracks.
! There are various ways to import tracks with the Serato DJ Intro software. For details, see the Serato DJ Intro software manual.
! If you are already using Serato DJ software (Scratch Live, ITCH or Serato DJ) and have already created track libraries, the track libraries you have
previously created can be used as such.
1 Click the [Files] key on the Serato DJ Intro software screen to open the [Files] panel.
The contents of your computer or the peripheral connected to the computer are displayed in the [Files] panel.
2 Click the folder on the [Files] panel containing the tracks you want to add to the library to select it.
3 On the Serato DJ Intro software screen, drag and drop the selected folder to the crates panel.
A crate is created and the tracks are added to the library.
a [Files] panel
b Crates panel
Loading tracks and playing them
The following describes the procedure for loading tracks into deck [1] as
an example.
BROWSE
LOAD
LOAD
1
2
3
1 LOAD button
2 Rotary selector
3 BACK (PANEL) button
1 Press this unit’s [BACK (PANEL)] button, move the
cursor to the crates panel on the computer’s screen, then
turn the rotary selector to select the crate, etc.
BACK
PANEL
0
2 Press the rotary selector, move the cursor to the
library on the computer’s screen, then turn the rotary
selector and select the track.
a Library
b Crates panel
3 Press the [LOAD] button to load the selected track
onto the deck.
En
8
Playing tracks and outputting the sound
0
LOW
HEADPHONES MIX
MASTERCUE
HEADPHONES LEVEL
MAXMIN
MASTER LEVEL
CUE
FILTER FADE
CH FADER START
PANEL
BACK
MAXMIN
FILTER
MAXMIN
HPFLPF
MID
MAXMIN
HI
1
L
C
CH FAD
MIN
FI
MIN
LPF
MIN
ON
4
5
6
7
8
9
The following describes the procedure for outputting the channel 1
sound as an example.
! Set the volume of the device connected to the [MASTER OUT] ter-
minals (power amplifier, powered speakers, etc.) to an appropriate
level. Note that the output sound may be loud if the volume is set too
high.
Mixer section
a
b
c
2 Press the [f] button to play the track.
0
CUE
3 Move the channel fader away from you.
4 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the audio level output from the [MASTER OUT] terminals to an
appropriate level.
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc. Position
HEADPHONES MIX control Center
HEADPHONES LEVEL control Turned fully counterclockwise
English
4 EQ (HI, MID, LOW) controls
5 FILTER control
6 Headphones CUE button
7 Channel fader
8 FILTER FADE button
9 Crossfader
a MASTER LEVEL control
b HEADPHONES MIX control
c HEADPHONES LEVEL control
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc. Position
EQ (HI, MID, LOW) controls Center
FILTER control Center
Channel fader Moved forward
MASTER LEVEL control Turned fully counterclockwise
1 Press the headphones [CUE] button for the channel 1.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Note
This unit and the Serato DJ Intro software include a variety of functions
enabling individualistic DJ performances. For details on the respective
functions, see the operating instructions and the Serato DJ Intro software manual.
! This unit’s operating instructions can be downloaded from the
Pioneer DJ support site. For details, see Downloading the latest ver-
sion of these operating instructions (p. 12).
! The Serato DJ Intro software manual can be downloaded from
Serato.com. For details, see Downloading the Serato DJ Intro software
manual (p. 12).
Quitting the system
1 Quit Serato DJ Intro.
When the software is closed, a message for confirming that you want to
close it appears on the computer’s screen. Click [Yes] to close.
2 Disconnect the USB cable from your computer.
En
9
Names of Parts
BROWSE
PANEL
LOAD
BACK
LOAD
MIN
1 1 2 3
1
TEMPO
LEVEL
KEY
LOCK
VINYL
MIC
LEVEL
MIC
HOT CUEAUTO LOOP
CUE
SAMPLER
FWD
REV
MANUAL LOOP
TEMPO
RANGE
SLIP
IN
ROLL
HOTLOOP BANK
SHIFT
SYNC
OFF
OUT
EXIT
1/2X
SELECT SELECT SELECT
BEATS
0
23
HOTCUE 5-8
1
2
3
4
a b c d
9
b c da
0
LOW
HEADPHONES MIX
MASTERCUE
HEADPHONES LEVEL
MAXMIN
MASTER LEVEL
CUE
FILTER FADE
CH FADER START
PANEL
BACK
MAXMIN
FILTER
MAXMIN
HPFLPF
MID
MAXMIN
HI
1
LOW
CUE
CH FADER START
MAXMIN
FILTER
MAXMIN
HPFLPF
MID
MAXMIN
HI
2
ON
1
2
3
4
1
2
3
4
5
6
1 2 3 4
1 TEMPO slider
2 Jog dial
3 KEY LOCK (TEMPO RANGE) button
4 VINYL (SLIP) button
5 HOT CUE mode button
6 AUTO LOOP mode button
7 MANUAL LOOP mode button
0
8 SAMPLER mode button
9 Performance pads
a Performance pad 1
b Performance pad 2
c Performance pad 3
d Performance pad 4
a f button
b CUE (
) button
c SYNC (OFF) button
d SHIFT button
1 Browser section
2 Deck section
3 Mixer section
4 Effect section
Browser section
1 LOAD button
2 Rotary selector
3 BACK (PANEL) button
Deck section
The deck section is used to control the two decks. There are controls and
buttons for operating deck 1 on the left side of the controller, controls
and buttons for operating deck 2 on the right side of the controller.
10
En
5
6 7 8
Mixer section
7
8
9
1 EQ (HI, MID, LOW) controls
2 FILTER control
3 Headphones CUE button
4 Channel fader
5 FILTER FADE button
6 Crossfader
7 MASTER LEVEL control
8 HEADPHONES MIX control
9 HEADPHONES LEVEL control
Effect section
This section is used to control the two effect units (FX1 and FX2).
Controls and buttons to operate the FX1 unit are located on the left side
of the controller, those to operate the FX2 unit are located on the right
side of the controller.
1 Effect 1 button
2 Effect 2 button
3 Effect 3 button
4 Effect level controls
1
FX1
23
SELECT SELECT SELECT
LEVEL
BEATS
Additional information
Troubleshooting
! Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points
below and the [FAQ] for the [DDJ-SB] on the Pioneer DJ support site.
Sometimes the problem may lie in another component. Inspect the other components and electrical appliances being used. If the problem cannot
be rectified, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
! This unit may not operate properly due to static electricity or other external influences. In this case, proper operation may be restored by turning the
power off, waiting 1 minute, then turning the power back on.
Problem Check Remedy
The power is not turned on. Is the included USB cable properly connected? Connect the included USB cable properly.
Is the supply of power from the connected computer’s USB port insufficient?
This unit is not recognized. Is the included USB cable properly connected? Connect the included USB cable properly.
Are you using a USB hub? USB hubs cannot be used. Connect the computer and this unit directly using
Is the driver software properly set? (Windows) Set the driver software properly. (With Mac OS X, no driver software is neces-
Are you using the latest version of the Serato DJ
Intro software?
Tracks are not displayed in the library. Have music files been imported? Import the music files properly.
Is a crate or subcrate that does not contain any
tracks selected?
iTunes tracks are not displayed in
the library.
No sound or small sound. Are the channel faders, crossfader and
Distorted sound. Is the [MASTER LEVEL] control set to the proper
Sound being played is interrupted
when using DJ software.
Sound is interrupted when the ASIO
driver is set.
The indicator flashes and operation
is strange.
Tone does not change when the
[FILTER] control is operated.
Is [Show iTunes Library] on the [SETUP] menu
checked?
Is a crate or subcrate that does not contain any
tracks selected?
[MASTER LEVEL] control set to the proper
positions?
Is the connected, power amplifier, powered speakers, etc., properly set?
Are the connection cables properly connected? Connect the connection cables properly.
Are the terminals and plugs dirty? Clean the terminals and plugs before making connections.
Is the driver software properly set? (Windows) Set the driver software properly. (With Mac OS X, no driver software is neces-
position?
Is the sound level input to the [MIC] terminal set to
an appropriate level?
Is a device with a high output level (such as a wire-
less microphone) connected?
Is the driver software’s latency value suitable? Set the driver software’s latency to a suitable value.
Has the ASIO driver been set with Serato DJ Intro
running?
— It is sometimes possible to restore normal operation by disconnecting the
Is the filter fade function on?
When the filter fade function is on, the tone does
not change when the [FILTER] control is operated.
Connect to a USB port providing sufficient power.
If devices not being used for the DJ performance are connected to other USB
ports, also disconnect them to provide sufficient power.
Try running the connected computer with the power supplied from an AC power
source rather running it on the battery.
the included USB cable.
sary.) (page 4)
Update the software to the latest version.
For details on importing music files, see the Serato DJ Intro software manual.
Either select a crate or subcrate that contains any tracks or add tracks to the
crate or subcrate.
Check [Show iTunes Library].
For details on importing music files, see the Serato DJ Intro software manual.
Either select a crate or subcrate that contains any tracks or add tracks to the
crate or subcrate.
Set the channel faders, crossfader and [MASTER LEVEL] control to the proper
positions.
Properly set the external input selection, volume, etc., on the power amplifier,
powered speakers, etc.
sary.) (page 4)
Adjust the [MASTER LEVEL] control according to the devices to be connected.
Set the audio level input to the terminals to a suitable level for the connected
devices.
When a wireless microphone or other device with a high output level is connected, the sound of the microphone may be distorted. If the output level can be
switched or the gain can be adjusted, adjust the signal level input to this unit’s
microphone jack to the lowest level possible.
For details, see the operating instructions of the connected device you are using.
Set the DJ software’s latency to a suitable value.
Set the ASIO driver before launching Serato DJ Intro.
included USB cable, waiting at least 1 minute, then reconnecting the USB cable.
If the same problem persists, disconnect the USB cable then request repairs.
Turn the filter fade function off.
English
En
11
Problem Check Remedy
Serato DJ Intro operation is unstable. Are you using the latest version of the software? Free updates of Serato DJ Intro can be downloaded from the website. Use the
Are you using softwares other than Serato DJ Intro
at the same time?
Is another USB device connected to the computer? Disconnect other USB devices from the computer.
Are you using a USB hub? USB hubs cannot be used. Connect the computer and this unit directly using
There is a problem with the USB port to which this
unit is connected.
Is this unit connected to a notebook computer
running on its battery?
The USB buffer size is too small. Raise the USB buffer size.
The BPM is not displayed.
The sync and auto loop functions do
not work.
BPM is not displayed properly. Is the BPM analysis range set appropriately in the
Has the track been analyzed? Analyze the track.
Is [Set Auto BPM] checked in the offline player
settings?
offline player settings?
most recent version. (page 4)
Quit other applications to decrease the load on the computer.
If operation continues to be unstable, try disabling the wireless network or other
wireless connections, antivirus software, the screen saver, the low power mode,
etc.
When another USB audio device is connected to the computer at the same time,
it may not operate or be recognized normally.
the included USB cable.
If your computer has multiple USB ports, try connecting this unit to a different
USB port.
Supply power to the notebook computer from an AC power supply.
(Depending on the notebook computer’s settings, the low power mode may be
set when the computer is running on its battery, automatically reducing the
performance of the computer itself.)
Re-analyze the track with [Set Auto BPM] checked.
For detailed instructions on analyzing tracks, see the Serato DJ Intro software
manual.
Change the BPM analysis range, then re-analyze the track. If this does not solve
the problem, set the BPM manually.
Acquiring the manual
The operating instructions may be in a file in PDF format. Adobe®
Reader® must be installed to read files in PDF format. If you do not
have Adobe Reader, please install it from the download link on the
CD-ROM’s menu screen.
Downloading the latest version of these
operating instructions
1 Insert the CD-ROM into the computer’s optical drive.
The CD-ROM menu is displayed.
If the CD-ROM’s menu does not appear when the CD-ROM is inserted,
perform the operations below.
! For Windows
Open the optical drive from [Computer (or My Computer)] in the
[Start] menu, then double-click the [CD_menu.exe] icon.
! For Mac OS X
In Finder, double-click the [CD_menu.app] icon directly.
2 When the CD-ROM’s menu is displayed, select [DDJSB: Download the Operating Instructions (PDF file)], then
click [Start].
3 “An internet environment is required to access the
site. Connected to the internet?” is displayed. Click [Yes].
The web browser is launched and the Pioneer DJ support site is
displayed.
4 On the Pioneer DJ support site, click “Manuals” under
“DDJ-SB”.
5 Click on the required language on the download
page.
Downloading of the operating instructions begins.
Downloading the Serato DJ Intro
software manual
1 Insert the CD-ROM into the computer’s optical drive.
The CD-ROM menu is displayed.
If the CD-ROM’s menu does not appear when the CD-ROM is inserted,
perform the operations below.
! For Windows
Open the optical drive from [Computer (or My Computer)] in the
[Start] menu, then double-click the [CD_menu.exe] icon.
! For Mac OS X
In Finder, double-click the [CD_menu.app] icon directly.
2 When the CD-ROM’s menu is displayed, select [Serato
DJ Intro: Download the Software Manual (PDF file)],
then click [Start].
3 “An internet environment is required to access the
site. Connected to the internet?” is displayed. Click [Yes].
The web browser is launched and the Pioneer DJ support site is
displayed.
! To close the CD-ROM menu, click [Exit].
4 Click [Software Info] under [DDJ-SB] on the Pioneer DJ
support site.
5 Click the link to the Serato DJ Intro download page.
The Serato DJ Intro download page is displayed.
6 Log in to your “Serato.com” user account.
Input the e-mail address and password you have registered to log in to
“Serato.com”.
7 From “More Downloads” on the right side of the
download page, click “Serato DJ Intro x.x User Manual”.
Downloading of the Serato DJ Intro software manual starts.
12
En
About trademarks and registered
trademarks
! Pioneer is a registered trademark of PIONEER CORPORATION.
The names of companies and products mentioned herein are the trademarks of their respective owners.
Cautions on copyrights
Recordings you have made are for your personal enjoyment and according to copyright laws may not be used without the consent of the copyright holder.
! Music recorded from CDs, etc., is protected by the copyright laws of
individual countries and by international treaties. It is the full responsibility of the person who has recorded the music to ensure that it is
used legally.
! When handling music downloaded from the Internet, etc., it is the
full responsibility of the person who has downloaded the music to
ensure that it is used in accordance with the contract concluded
with the download site.
Specifications
General – Main Unit
Power supply ........................................................................................DC 5 V
Rated current ..................................................................................... 500 mA
Main unit weight .......................................................................2.1 kg (4.6 lb)
Max. dimensions ................... 487 mm (W) × 58.5 mm (H) × 271.2 mm (D)
(19.2 in. (W) × 2.3 in. (H) × 10.7 in. (D))
Tolerable operating temperature ........................................ +5 °C to +35 °C
Tolerable operating humidity ...................... 5 % to 85 % (no condensation)
Audio Section
Sampling rate ....................................................................................44.1 kHz
D/A converter .......................................................................................24 bits
Rated output level
MASTER OUT ............................................................................. 2.1 Vrms
Frequency characteristic
USB, MIC ......................................................................... 20 Hz to 20 kHz
S/N ratio (rated output, A-WEIGHTED)
USB .................................................................................................. 78 dB
MIC .................................................................................................. 78 dB
Total harmonic distortion
USB ...............................................................................................0.005 %
Input impedance
MIC .................................................................................................. 11 kW
Output impedance
MASTER OUT ........................................................................ 1 kW or less
PHONES ............................................................................................ 10 W
Input / Output terminals
MIC terminal
Phone jack (Ø 6.3 mm) ..................................................................... 1 set
MASTER OUT output terminal
RCA pin jack (Ø 6.3 mm) .................................................................. 1 set
HEADPHONES output terminal
Stereo phone jack (Ø 6.3 mm) .........................................................1 set
Stereo mini phone jack (Ø 3.5 mm) ................................................. 1 set
USB terminal
B type .................................................................................................1 set
English
! For improvement purposes, specifications and design of this unit
and the included software are subject to change without notice.
! © 2013 PIONEER CORPORATION. All rights reserved.
En
13
UCP0212
PIONEER ELECTRONICS (USA) INC.
WARRANTY VALID ONLY IN THE U.S.A. AND CANADA
WARRANTY
Pioneer Electronics (USA) Inc. (PUSA) warrants that products distributed by PUSA in the U.S.A. and Canada that fail to function properly under normal use due to a manufacturing
defect when installed and operated according to the owner’s manual enclosed with the unit will be repaired or replaced with a unit of comparable value, at the option of PUSA,
without charge to you for parts or actual repair work. Parts supplied under this warranty may be new or rebuilt at the option of PUSA.
THIS LIMITED WARRANTY APPLIES TO THE ORIGINAL OR ANY SUBSEQUENT OWNER OF THIS PIONEER PRODUCT DURING THE WARRANTY PERIOD PROVIDED THE
PRODUCT WAS PURCHASED FROM AN AUTHORIZED PIONEER DISTRIBUTOR/DEALER IN THE U.S.A. OR CANADA. YOU WILL BE REQUIRED TO PROVIDE A SALES
RECEIPT OR OTHER VALID PROOF OF PURCHASE SHOWING THE DATE OF ORIGINAL PURCHASE OR, IF RENTED, YOUR RENTAL CONTRACT SHOWING THE PLACE
AND DATE OF FIRST RENTAL. IN THE EVENT SERVICE IS REQUIRED, THE PRODUCT MUST BE DELIVERED WITHIN THE WARRANTY PERIOD, TRANSPORTATION
PREPAID, ONLY FROM WITHIN THE U.S.A. AS EXPLAINED IN THIS DOCUMENT. YOU WILL BE RESPONSIBLE FOR REMOVAL AND INSTALLATION OF THE PRODUCT .
PUSA WILL PAY TO RETURN THE REPAIRED OR REPLACEMENT PRODUCT TO YOU WITHIN THE U.S.A.
PRODUCT WARRANTY PERIOD
DJ Audio and Video ................................................................................................................................................................................... 1 Year 1 Year
The warranty period for retail customers who rent the product commences upon the date product is first put into use (a) during the rental period or (b) retail sale, whichever occurs first.
WHAT IS NOT COVERED
IF THIS PRODUCT WAS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTY
OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND THIS PRODUCT IS SOLD STRICTLY “AS IS” AND “WITH ALL FAULTS".
PIONEER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL AND/OR INCIDENTAL DAMAGES.
THIS WARRANTY DOES NOT APPLY IF THE PRODUCT HAS BEEN SUBJECTED TO POWER IN EXCESS OF ITS PUBLISHED POWER RATING.
THIS WARRANTY DOES NOT COVER THE CABINET OR ANY APPEARANCE ITEM, USER ATTACHED ANTENNA, ANY DAMAGE TO RECORDS OR RECORDING TAPES OR DISCS, ANY
DAMAGE TO THE PRODUCT RESULTING FROM ALTERATIONS, MODIFICA
LIGHTNING OR TO POWER SURGES, SUBSEQUENT DAMAGE FROM LEAKING, DAMAGE FROM INOPERATIVE BATTERIES, OR THE USE OF BATTERIES NOT CONFORMING TO THOSE
SPECIFIED IN THE OWNER’S MANUAL.
THIS WARRANTY DOES NOT COVER THE COST OF PARTS OR LABOR WHICH WOULD BE OTHERWISE PROVIDED WITHOUT CHARGE UNDER THIS WARRANTY OBTAINED FROM
ANY SOURCE OTHER THAN A PIONEER AUTHORIZED SERVICE COMPANY OR OTHER DESIGNAT ED LOCATION. THIS WARRANTY DOES NOT COVER DEFECTS OR DAMAGE CAUSED
BY THE USE OF UNAUTHORIZED PARTS OR LABOR OR FROM IMPROPER MAINTENANCE.
ALTERED, DEFACED, OR REMOVED SERIAL NUMBERS VOID THIS ENTIRE WARRANTY
NO OTHER WARRANTIES
PIONEER LIMITS ITS OBLIGATIONS UNDER ANY IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, TO A PERIOD NOT TO EXCEED THE WARRANTY PERIOD. NO WARRANTIES SHALL APPLY AFTER THE WARRANTY PERIOD.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND SOME STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATIONS
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.
TO OBTAIN SERVICE
PUSA has appointed a number of Authorized Service Companies throughout the U.S.A. and Canada should your product require service. To receive warranty service you
need to present your sales receipt or, if rented, your rental contract showing place and date of original owner’s transaction. If shipping the unit you will need to package it
carefully and send it, transportation prepaid by a traceable, insured method, to an Authorized Service Company. Package the product
prevent damage in transit. The original container is ideal for this purpose. Include your name, address and telephone number where you can be reached during business
hours.
On all complaints and concerns in the U.S.A. and Canada call Customer Support at 1-800-872-4159.
LIMITED WARRANTY
Parts Labor
TIONS NOT AUTHORIZED IN WRITING BY PIONEER, ACCIDENT, MISUSE OR ABUSE, DAMAGE DUE TO
using adequate padding material to
For hook-up and operation of your unit or to locate an
Authorized Service Company, please call or write:
DISPUTE RESOLUTION
Following our response to any initial request to Customer Support, should a dispute arise between you and Pioneer, Pioneer makes available its Complaint Resolution Program
to resolve the dispute. The Complaint Resolution Program is available to you without charge. You are required to use the Complaint Resolution Program before you exercise
any rights under, or seek any remedies, created by Title I of the Magnuson-Moss Warranty-Federal Tr ade Commission Improvement Act, 15 U.S.C. 2301 et seq.
To use the Complaint Resolution Program call 1-800-872-4159 and explain to the customer service representative the problem you are experiencing, steps you have taken
to have the product repaired during the warranty period and the name of the authorized Distributor/Dealer from whom the Pioneer product was purchased. After the complaint
has been explained to the representative, a resolution number will be issued. Within 40 days of receiving your complaint, Pioneer will investigate the dispute and will either:
(1) respond to your complaint in writing informing you what action Pioneer will take, and in what time period, to resolve the dispute; or (2) respond to your complaint in writing
informing you why it will not take any action.
CUSTOMER SUPPORT
PIONEER ELECTRONICS (USA) INC.
LONG BEACH, CALIFORNIA 90801
P.O. BOX 1720
1-800-872-4159
http://www.pioneerelectronics.com
RECORD THE PLACE AND DATE OF PURCHASE FOR FUTURE REFERENCE
Model No. ____________________________________________ Serial No. _________________________________________ Purchase Date ______________________
Purchased From ____________________________________________________________________________________________________________________________
KEEP THIS INFORMATION AND YOUR SALES RECEIPT IN A SAFE PLACE
_
En14Fr
AVERTISSEMENT
Cet appareil n’est pas étanche. Pour éviter les risques
Les habitants des états membres de l’UE, de Suisse et de Nor
peuvent retourner gratuitement leurs appareils électroniques
usagés aux centres de collecte agréés ou à un détaillant (si vous
rachetez un appareil similaire neuf).
Dans les pays qui ne sont pas mentionnés ci-dessus, veuillez
contacter les autorités locales pour savoir comment vous pouvez
vous débarrasser de vos appareils.
V
débarrassez sont correctement récupérés, traités et recyclés et
préviendrez de cette façon les impacts néfastes possibles sur
l’environnement et la santé humaine.
ATTENTION
POUR ÉVITER TOUT RISQUE D’ÉLECTROCUTION, NE
PA
ARRIÈRE). A
L
CONFIER TOUT ENTRETIEN À UN PERSONNEL
QU
Pour le Canada
d’incendie et de décharge électrique, ne placez près de
lui un récipient rempli d’eau, tel qu’un vase ou un pot
de fleurs, et ne l’exposez pas à des gouttes d’eau, des
éclaboussures, de la pluie ou de l’humidité.
AVERTISSEMENT
Pour éviter les risques d’incendie, ne placez aucune
flamme nue (telle qu’une bougie allumée) sur
l’appareil.
Milieu de fonctionnement
Température et humidité du milieu de fonctionnement :
De +5 °C à +35 °C (de +41 °F à +95 °F) ; Humidité
relative inférieure à 85 % (orifices de ventilation non
obstrués)
N’installez pas l’appareil dans un endroit mal ventilé ou
un lieu soumis à une forte humidité ou en plein soleil
(ou à une forte lumière artificielle).
Lorsque vous utilisez ce produit, vérifiez les
informations concernant la sécurité sous l’appareil.
Ce produit est destiné à une utilisation domestique
générale. Toute panne due à une utilisation autre qu'à
des fins privées (comme une utilisation à des fins
commerciales dans un restaurant, dans un autocar
ou sur un bateau) et qui nécessite une réparation
sera aux frais du client, même pendant la période de
garantie.
Pour l’Europe
Si vous souhaitez vous débarrasser de cet appareil, ne le
mettez pas à la poubelle avec vos ordures ménagères. Il
existe un système de collecte séparé pour les appareils
électroniques usagés, qui doivent être récupérés, traités
et recyclés conformément à la législation.
D3-4-2-1-3_A1_Fr
D3-4-2-1-7a_A1_Fr
D3-4-2-1-7c*_A1_Fr
D3-4-2-2-4_B1_Fr
K041_A1_Fr
vège
IMPORTANT
Ce symbole de l’éclair, placé dans un triangle équilatéral, a pour
but d’attirer l’attention de l’utilisateur sur la présence, à
l’intérieur du coffret de l’appareil, de “tensions dangereuses”
non isolées d’une grandeur suffisante pour représenter un
risque d’électrocution pour les êtres humains.
ATTENTION
DANGER D´ELECTROCUTION
NE PAS OUVRIR
ATTENTION :
POUR ÉVITER TOUT RISQUE D’ÉLECTROCUTION, NE PAS
ENLEVER LE COUVERCLE (NI LE PANNEAU ARRIÈRE). AUCUNE
PIÈCE RÉPARABLE PAR L’UTILISATEUR NE SE TROUVE À
L’INTÉRIEUR. CONFIER TOUT ENTRETIEN À UN PERSONNEL
QUALIFIÉ UNIQUEMENT.
Ce point d’exclamation, placé dans un triangle équilatéral, a
pour but d’attirer l’attention de l’utilisateur sur la présence, dans
les documents qui accompagnent l’appareil, d’explications
importantes du point de vue de l’exploitation ou de l’entretien.
D3-4-2-1-1b_A1_Fr
REMARQUE IMPORTANTE
LE NUMÉRO DE MODÈLE ET LE NUMÉRO DE SÉRIE
SE TROUVENT À L’ARRIÈRE OU SUR LE FOND DE
CET APPAREIL. NOTEZ CES NUMÉROS À LA PAGE
14 POUR VOUS Y RÉFÉRER ULTÉRIEUREMENT.
D36-AP9-3*_A1_Fr
ous garantirez ainsi que les appareils dont vous vous
S ENLEVER LE COUVERCLE (NI LE PANNEAU
UCUNE PIÈCE RÉPARABLE PAR
’UTILISATEUR NE SE TROUVE À L’INTÉRIEUR.
ALIFIÉ UNIQUEMENT.
Ce produit respecte la réglementation en matière
d’interférences électromagnétiques lorsqu’il est
raccordé à d’autres appareils par des câbles et
connecteurs blindés.
N’utilisez que les câbles de liaison fournis en
accessoires.
2
K058b_A1_Fr
D3-4-2-1-1_B1_Fr
D44-8-2_A1_Fr
La protection de votre ouïe est entre vos
mains
P
our assurer le rendement optimal de votre matériel
et – plus important encore – la protection de votre ouïe,
réglez le volume à un niveau raisonnable. P
altérer votre sens de la perception
mais ne produire aucun vacarme et être exempt de
toute distorsio
Avec le temps, votre système auditif peut en effet
s’adapter à des volumes supérieurs, et ce qui vous
semble un « niveau de confort normal » pourrait au
contraire être excessif et contribuer à endommager
votre ouïe de façon permanente. Le réglage de votre
matériel à un volume sécuritaire
s’adapte vous permettra de mieux vous protéger
CHOISISSEZ UN VOLUME SÉCURIT
•
•
•
N’OUBLIEZ P
DIRECTIVES SUIV
•
•
•
our ne pas
, le son doit être clair
n. Votre ouïe peut vous jouer des tours.
AVANT que votre ouïe
AIRE:
Réglez d’abord le volume à un niveau inférieur.
Montez progressivement le volume jusqu’à un niveau
d’écoute confortable ; le son doit être clair et exempt
de distorsions.
Une fois que le son est à un niveau confortable, ne
touchez plus au bouton du volume.
AS DE RESPECTER LES
ANTES:
Lorsque vous montez le volume, assurez-vous de
pouvoir quand même entendre ce qui se passe
autour de vous.
Faites très attention ou cessez temporairement
l’utilisation dans les situations pouvant s’avérer
dangereuses.
N’utilisez pas des écouteurs ou un casque d’écoute
lorsque vous opérez un véhicule motorisé ; une telle
utilisation peut créer des dangers sur la route et est
illégale à de nombreux endroits.
.
S001a_A1_Fr
Français
Fr
3
Informations préliminaires
Comment lire ce manuel
! Merci pour l’achat de ce produit Pioneer.
Prière de lire cette brochure et le mode d’emploi ! Les deux docu-
ments contiennent des informations importantes qui doivent être
comprises avant d’utiliser ce produit.
Cela fait, conservez le mode d’emploi de façon à pouvoir vous y
référer en cas de nécessité.
— Pour les instructions sur l’acquisition du mode d’emploi, repor-
tez-vous à Obtention du manuel (p. 12).
! Dans ce manuel, les noms d’écrans et de menus s’affichant sur
le produit et sur l’écran de l’ordinateur, de même que les noms de
touches et de prises, etc. sont indiqués entre parenthèses. (Ex. :
Touche [CUE], panneau [Files], prise [MIC])
! Veuillez noter que les écrans et les caractéristiques techniques
du logiciel décrit dans ce manuel, ainsi que l’aspect externe et les
caractéristiques techniques du matériel sont en cours de développement de sorte que les caractéristiques finales peuvent être
différentes.
! Veuillez noter que selon la version du système d’exploitation, les
réglages du navigateur web, etc., le fonctionnement peut être différent des marches à suivre indiquées dans ce mode d’emploi.
Caractéristiques
Cet appareil est un système DJ complet regroupant des appareils DJ
Pioneer ayant acquis une grande réputation chez les professionnels DJ
pour leur excellente maniabilité due au logiciel DJ “Serato DJ Intro” de
Serato.
Cet appareil se caractérise par son large coffret et ses “Gros Jogs”,
optimaux pour le scratching, ainsi que par ses pads performance permettant un arrangement des morceaux par une utilisation dynamique
des taper et rouler, si bien que les diverses fonctions du Serato DJ Intro
peuvent être maniées de façon intuitive et précise.
Grâce à la carte son (interface audio) intégrée, les câblages et réglages
complexes deviennent superflus et les prestations DJ peuvent débuter
immédiatement.
Contenu du carton d’emballage
! CD-ROM (Disque d’installation)
! Câble USB
! Garantie (pour certaines régions)
! A lire avant l’utilisation (Important)/Guide de démarrage rapide (ce
document)
1 La garantie incluse est destinée à la région européenne.
— Pour la région nord-américaine, les informations correspon-
dantes se trouvent à la dernière page des versions anglaises et
françaises des “A lire avant l’utilisation (Important)/Guide de
démarrage rapide”.
— Pour la région japonaise, les informations correspondantes se
trouvent à la dernière page de la version japonaise des “A lire
avant l’utilisation (Important)/Guide de démarrage rapide”.
1
Installation du logiciel
Avant d’installer le pilote
Pour la toute dernière version du logiciel Serato DJ Intro, accédez à
Serato.com et téléchargez le logiciel de ce site. Vous trouverez aussi
un lien pour le téléchargement du logiciel sur le CD-ROM fourni.
! Pour le détail, reportez-vous à Marche à suivre (Windows) ou
Marche à suivre (Mac OS X).
! Les préparatifs concernant l’ordinateur, les dispositifs réseau et
l’environnement Internet nécessaires à la connexion Internet sont
du ressort de l’utilisateur.
À propos du pilote (Windows)
Ce logiciel est un pilote ASIO prévu exclusivement pour transmettre des
signaux audio de l’ordinateur.
! Il n’est pas nécessaire d’installer le pilote dans le cas de Mac OS X.
Vérification des toutes dernières informations
concernant le pilote
Pour de plus amples informations sur le pilote prévu pour cet appareil,
reportez-vous au site de support DJ de Pioneer ci-dessous.
http://pioneerdj.com/support/
À propos du logiciel Serato DJ Intro
Serato DJ Intro est une application logicielle DJ de Serato. En reliant l’ordinateur sur lequel ce logiciel est installé à cet appareil, il est possible
d’effectuer des performances DJ.
Environnement fonctionnel minimal
Systèmes
d’exploitation pris en
charge
Mac OS X : 10.8, 10.7
et 10.6
Windows : Windows 7
(SP1) et Windows Vista
(SP1)
Divers
Lecteur optique Lecteur de disque optique pouvant lire le CD-ROM
Port USB
Résolution de l’écran Résolution de 1 024 x 768 ou plus
Connexion Internet
! Pour les toutes dernières informations sur l’environnement opérationnel et la
compatibilité ainsi que pour acquérir le tout dernier système d’exploitation,
reportez-vous à “Software Info” dans “DDJ-SB” sur le site de support DJ de
Pioneer ci-dessous.
http://pioneerdj.com/support/
! L’assistance pour le système d’exploitation présuppose que vous utilisez la toute
dernière édition de cette version.
! Le fonctionnement sur tous les ordinateurs n’est pas garanti, même lorsque les
conditions de fonctionnement mentionnées ci-dessus sont remplies.
! Selon les réglages d’économie d’énergie de l’ordinateur, etc. la capacité de
traitement du processeur et du disque dur peut être insuffisante. Lorsque vous
utilisez Serato DJ Intro, assurez-vous que l’ordinateur est en état de fournir sa
performance optimale (par exemple en laissant le cordon d’alimentation rac-
cordé), surtout s’il s’agit d’un ordinateur portable.
! L’emploi d’Internet exige la signature d’un contrat séparé avec un fournisseur de
services Internet et le paiement de droits.
Processeur et mémoire requise
Processeur Intel
1 Go ou plus de RAM
Processeur Intel
1 Go ou plus de RAM
Un port USB 2.0 est indispensable pour raccorder cet
ordinateur à cet appareil.
Une connexion Internet est nécessaire pour l’enregistrement du compte utilisateur sur “Serato.com” et pour
le téléchargement du logiciel.
®
Core™ Duo 1,6 GHz ou plus
®
, Core™ 2 Duo 2,0 GHz ou plus
À propos de l’installation
La marche à suivre pour l’installation dépend du système d’exploitation
(OS) de l’ordinateur utilisé.
Pour Windows
Après avoir installé le pilote, installez le logiciel Serato DJ Intro.
Pour Mac OS X
Installez seulement le logiciel Serato DJ Intro.
Fr
4
Marche à suivre (Windows)
Ne raccordez cet appareil et l’ordinateur que lorsque l’installation est
terminée.
! Connectez-vous sous le nom de l’utilisateur spécifié comme admi-
nistrateur de l’ordinateur avant l’installation.
! Si des programmes sont ouverts sur l’ordinateur, fermez-les.
1 Insérez le CD-ROM dans le lecteur optique de
l’ordinateur.
Le menu du CD-ROM apparaît.
! Si le menu du CD-ROM n’apparaît pas après l’insertion du CD-ROM,
ouvrez le lecteur optique dans [Ordinateur (ou Poste de travail)]
à partir du menu [Démarrer], puis double-cliquez sur l’icône
[CD_menu.exe].
2 Lorsque le menu du CD-ROM apparaît, sélectionnez
[Installer le Logiciel de pilotage (Pioneer_DDJ_SB_
Driver_x.xxx.exe)], puis cliquez sur [Demarrer].
! Pour fermer le menu du CD-ROM, cliquez sur [Quitter].
3 Procédez à l’installation en suivant les instructions qui
apparaissent à l’écran.
Si [Sécurité de Windows] apparaît à l’écran au cours de l’installation,
cliquez sur [Installer ce pilote quand même] et continuez l’installation.
Lorsque le programme d’installation est terminé, le message Installation
terminée apparaît.
Après avoir installé le pilote, installez le logiciel Serato DJ Intro.
4 Sélectionnez [Télécharger le logiciel Serato DJ Intro.]
dans le menu du CD-ROM, puis cliquez sur [Demarrer].
5 “Une connexion internet est nécessaire pour pouvoir
accéder au site. Connecté à internet ?” apparaît. Cliquez
sur [Oui].
Le navigateur web démarre et le site de support DJ de Pioneer apparaît.
6 Cliquez sur [Software Info] dans [DDJ-SB] sur le site
de support DJ de Pioneer.
7 Cliquez sur le lien vers la page de téléchargement de
Serato DJ Intro.
La page de téléchargement de Serato DJ Intro apparaît.
8 Connectez-vous à votre compte utilisateur sur “Serato.com”.
! Si vous possédez déjà un compte utilisateur sur “Serato.com”, pas-
sez au point 10.
! Si vous ne possédez pas déjà un compte utilisateur, procédez de la
façon suivante.
— Suivez les instructions à l’écran, saisissez votre adresse de
messagerie et le mot de passe souhaité, puis sélectionnez votre
région de résidence.
— Si vous cochez [E-mail me Serato newsletters], Serato vous
enverra des newsletters avec les toutes dernières informations
sur les produits Serato.
— Lorsque l’enregistrement du compte utilisateur est terminé, vous
recevrez un message à l’adresse de messagerie indiquée. Vérifiez
le contenu du message envoyé par “Serato.com”.
! Veillez à ne pas oublier l’adresse de messagerie et le mot de passe
spécifiés lors de votre enregistrement. Ils seront nécessaires pour la
mise à jour du logiciel.
! Les informations personnelles entrées lors de l’enregistrement d’un
nouveau compte utilisateur peuvent être collectées, traitées et utilisées selon les règles de la politique de confidentialité consultables
sur le site Serato.
9 Cliquez sur le lien dans le message envoyé par
“Serato.com”.
Ceci vous conduit à la page de téléchargement de Serato DJ Intro.
Passez au point 11.
10 Connectez-vous.
Saisissez l’adresse de messagerie et le mot de passe enregistrés pour la
connexion à “Serato.com”.
11 Téléchargez le logiciel Serato DJ Intro de la page de
téléchargement.
Décompressez le fichier téléchargé, puis double-cliquez sur le fichier
décompressé pour démarrer l’installateur.
12 Lisez attentivement les termes du contrat de
licence et, si vous acceptez, sélectionnez [I accept the
agreement] puis cliquez sur [Next].
! Si vous n’acceptez pas le contenu du contrat d’utilisation, cliquez
sur [Cancel] pour annuler l’installation.
L’installation commence.
Lorsqu’elle est terminée, le message d’installation réussie apparaît.
13 Cliquez sur [Finish] pour fermer l’installateur Serato
DJ Intro.
Marche à suivre (Mac OS X)
Ne raccordez cet appareil et l’ordinateur que lorsque l’installation est
terminée.
! Si des programmes sont ouverts sur l’ordinateur, fermez-les.
1 Insérez le CD-ROM dans le lecteur optique de
l’ordinateur.
Le menu du CD-ROM apparaît.
! Si le menu du CD-ROM n’apparaît pas sur l’écran lorsque le
CD-ROM est inséré, ouvrez le lecteur optique par le Finder, puis
double-cliquez sur l’icône [CD_menu.app].
2 Sélectionnez [Télécharger le logiciel Serato DJ Intro.]
dans le menu du CD-ROM, puis cliquez sur [Demarrer].
3 “Une connexion internet est nécessaire pour pouvoir
accéder au site. Connecté à internet ?” apparaît. Cliquez
sur [Oui].
Le navigateur web démarre et le site de support DJ de Pioneer apparaît.
4 Cliquez sur [Software Info] dans [DDJ-SB] sur le site
de support DJ de Pioneer.
Français
Fr
5
5 Cliquez sur le lien vers la page de téléchargement de
Serato DJ Intro.
La page de téléchargement de Serato DJ Intro apparaît.
6 Connectez-vous à votre compte utilisateur sur
“Serato.com”.
! Si vous possédez déjà un compte utilisateur sur “Serato.com”, pas-
sez au point 8.
! Si vous ne possédez pas déjà un compte utilisateur, procédez de la
façon suivante.
— Suivez les instructions à l’écran, saisissez votre adresse de
messagerie et le mot de passe souhaité, puis sélectionnez votre
région de résidence.
— Si vous cochez [E-mail me Serato newsletters], Serato vous
enverra des newsletters avec les toutes dernières informations
sur les produits Serato.
— Lorsque l’enregistrement du compte utilisateur est terminé, vous
recevrez un message à l’adresse de messagerie indiquée. Vérifiez
le contenu du message envoyé par “Serato.com”.
! Veillez à ne pas oublier l’adresse de messagerie et le mot de passe
spécifiés lors de votre enregistrement. Ils seront nécessaires pour la
mise à jour du logiciel.
! Les informations personnelles entrées lors de l’enregistrement d’un
nouveau compte utilisateur peuvent être collectées, traitées et utilisées selon les règles de la politique de confidentialité consultables
sur le site Serato.
7 Cliquez sur le lien dans le message envoyé par
“Serato.com”.
Ceci vous conduit à la page de téléchargement de Serato DJ Intro.
Passez au point 9.
8 Connectez-vous.
Saisissez l’adresse de messagerie et le mot de passe enregistrés pour la
connexion à “Serato.com”.
9 Téléchargez le logiciel Serato DJ Intro de la page de
téléchargement.
Décompressez le fichier téléchargé, puis double-cliquez sur le fichier
décompressé pour démarrer l’installateur.
10 Lisez attentivement les termes du contrat de licence
et, si vous acceptez, cliquez sur [Agree].
Fonctionnement
Débranchez toujours le câble USB avant d’effectuer ou de changer les
branchements des appareils.
Seul le câble USB fourni avec ce produit doit être utilisé.
Reportez-vous au mode d’emploi de l’appareil devant être raccordé.
L’alimentation de cet appareil est fournie par le bus USB. Cet appareil
peut être utilisé simplement après l’avoir raccordé à un ordinateur par
le câble USB.
! Raccordez l’ordinateur auquel cet appareil doit être raccordé à une
source d’alimentation secteur.
! Un concentrateur USB ne peut pas être utilisé.
! Dans les cas suivants, l’alimentation peut être insuffisante et cet
appareil ne pas fonctionner bien qu’alimenté par le bus USB.
— L’alimentation fournie par le bus USB de l’ordinateur est
insuffisante.
— D’autres appareils USB sont raccordés à l’ordinateur.
— L’impédance du casque d’écoute raccordé est inférieure à 32 W.
— Des casques d’écoute sont raccordés simultanément au jack
stéréo et au mini-jack stéréo.
— Un jack mono est branché sur la prise [HEADPHONES].
Raccordements
MASTER OUT
0
RL
Amplificateur de puissance,
L
R
enceintes amplifiées, etc.
USB
Ordinateur
! Si vous n’acceptez pas le contenu du contrat d’utilisation, cliquez
sur [Disagree] pour annuler l’installation.
11 Si l’écran suivant apparaît, tirez et déposez l’icône
[Serato DJ Intro] dans l’icône de dossier [Applications].
Fr
6
Casque
1 Raccordez un casque à l’une des prises
[HEADPHONES].
2 Raccordez un amplificateur de puissance, des
enceintes amplifiées, etc. aux prises [MASTER OUT].
! Pour le détail sur le raccordement aux prises d’entrée/sortie, repor-
tez-vous au mode d’emploi.
3 Allumez l’ordinateur.
4 Raccordez cet appareil à votre ordinateur avec un
câble USB.
! Pour les utilisateurs de Windows
Le message [Installation du pilote logiciel de périphérique] peut
apparaître la première fois que cet appareil est raccordé à l’ordinateur ou lorsqu’il est raccordé à un autre port USB de l’ordinateur.
Attendez un instant que le message [Vos périphériques sont prêts
à être utilisés.] apparaisse.
5 Allumez les appareils raccordés aux prises de sortie
(amplificateur de puissance, enceintes amplifiées, etc.).
! Lorsqu’un microphone est raccordé aux prises d’entrée, le micro-
phone s’allume aussi.
Ouverture du système
A
C
AA
C
B
Lancement de Serato DJ Intro
Pour Windows
Depuis le menu [Démarrer] de Windows, cliquez sur l’icône [Serato DJ Intro] dans [Tous les programmes] > [Serato] > [DJ Intro].
Pour Mac OS X
Dans le Finder, ouvrez le dossier [Application], puis cliquez sur l’icône [Serato DJ Intro].
Écran de l’ordinateur directement après le lancement du logiciel Serato DJ Intro
Écran de l’ordinateur quand un morceau est chargé dans le logiciel Serato DJ Intro
Français
A Section Platines
Les informations d’un morceau (le nom du morceau chargé, le nom de l’artiste, le BPM, etc.) l’ensemble de l’onde et d’autres informations apparaissent ici.
B Affichage de la forme d’onde
La forme d’onde du morceau chargé apparaît ici.
C Section d’exploration
Les crates où des morceaux de la bibliothèque ou des ensembles de plusieurs morceaux sont stockés apparaissent ici.
Ce manuel contient essentiellement les explications des fonctions de l’appareil proprement dit. Pour les instructions détaillées sur le fonctionnement
du logiciel Serato DJ Intro, reportez-vous au manuel du logiciel Serato DJ Intro.
Fr
7
Loading...