Pioneer AVH-4000NEX Owner's Manual

DVD RDS AV RECEIVER AUTORADIO AV RDS LECTEUR DE DVD RADIO AV RDS CON DVD

English

AVH-4000NEX

Español Français

Owner’s Manual

Mode d’emploi

Manual de instrucciones

Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference.

Contents

Important

The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements.

Precaution

Information to User ........................................ 5

The Safety of Your Ears is in Your Hands .......... 5

ESTABLISH A SAFE LEVEL: ............................... 5

BE SURE TO OBSERVE THE

FOLLOWING GUIDELINES: ......................... 5

License, Warranty Disclaimer &

Limitation of Liability ............................... 5

SAFETY PROVISIONS ......................................... 5

Important safety information ........................ 6

Parking brake interlock .................................. 6

To ensure safe driving ......................................... 6

When using a display connected

to V OUT .................................................... 6

To avoid battery exhaustion ........................... 6

Rear view camera............................................ 6

Handling the SD card slot ............................. 6

Handling the USB connector ........................ 7

Important (Serial Number:) ........................... 7

Failure to operate ............................................ 7

Visit our website .............................................. 7

Protecting the LCD panel and screen .......... 7

Notes on internal memory ............................. 7

Before removing the vehicle battery ................. 7

Data subject to erasure ....................................... 7

Resetting the microprocessor ............................ 7

About this manual .......................................... 7

Use and care of the remote control .............. 7

Installing the battery ........................................... 7

Using the remote control .................................... 8

Basic operation

Checking part names and functions ............ 8

Remote control ................................................ 8

Protecting your product against theft .......... 9

Removing the front panel ................................... 9

Attaching the front panel .................................... 9

Notes on using the LCD panel....................... 9

Adjusting the LCD panel angle ..................... 9

Inserting/ejecting/connecting media ........... 9

Inserting and ejecting a disc .............................. 9

Inserting and ejecting an SD memory card.... 10

Connecting and disconnecting an iPod .......... 10

Plugging and unplugging a USB

storage device ............................................. 10

Startup and termination................................10

On first-time startup ......................................10

Regular startup ..............................................10

Turning off the display ...................................10

How to use the screens .................................11

Switching screens using the touch

panel keys .................................................... 11

Switching screens using the hard-

ware buttons................................................ 11

Supported AV source ....................................11

Displaying the AV operation screen ............11

Selecting a front source on the AV

source selection screen ............................. 12

Selecting a front source on the source list ..... 12

Selecting a rear source ..................................... 12

Turning off the AV source .............................12

Changing the display order of

source icons ............................................12

Changing the display order of

source keys ..............................................12

Using the touch panel ...................................12

Using the common touch panel keys .............. 12

Operating list screens ....................................... 12

Operating the time bar ...................................... 12

Operating the on-screen keyboard .................. 13

Registering and con-

necting a Bluetooth device

Preparing communication devices ..............13

Registering your Bluetooth devices ............13

Searching for nearby Bluetooth devices......... 13

Pairing from your Bluetooth devices ............... 13

Connecting to a Bluetooth device

automatically............................................... 14

Deleting a registered device ............................. 14

Connecting a registered

Bluetooth device manually ....................14

Switching visibility ........................................14

Entering the PIN code for

Bluetooth wireless connection .............14

Displaying the Bluetooth device

address .....................................................14

Clearing the Bluetooth memory ..................15

Updating Bluetooth software .......................15

Displaying the Bluetooth soft-

ware version ............................................15

Using hands-free phoning

Displaying the phone menu .........................15

Touch panel keys ............................................... 15

Reading the screen ............................................ 15

Making a phone call ......................................15

Direct dialing ...................................................... 16

Calling a number in the phone book ............... 16

Dialing from the history .................................... 16

Using the preset dial lists ................................. 16

Receiving a phone call ..................................17

Answering an incoming call ............................. 17

Minimizing the dial confirmation screen ....17

Changing the phone settings .......................17

Answering a call automatically ........................ 17

Switching the ring tone ..................................... 17

Inverting names in the phone book ................. 17

Setting the private mode .................................. 18

Adjusting the other party’s listen-

ing volume ................................................... 18

Using the voice recognition

function (for iPhone) ..............................18

Notes for hands-free phoning ......................18

iPod / iPhone or

smartphone setup operation

The basic flow of iPod / iPhone

or smartphone setup ..............................18

Setting the device connection method .......18

iPod compatibility ..........................................19

Android™ device compatibility ....................19

MirrorLink device compatibility ...................19

Information on the connections

and functions for each device ...............19

HD Radio™ reception

HD Radio stations ..........................................20

Using the touch panel keys ..........................20

Reading the screen ........................................21

Starting procedure .........................................21

Selecting a band ............................................21

Manual tuning ................................................21

Seek tuning.....................................................21

Selecting a preset channel from

the preset channel list ............................22

Storing broadcast frequencies .....................22

Storing the strongest broadcast

frequencies ..............................................22

Tuning into strong frequencies ....................22

Switching the seek mode..............................22

Switching the reception mode .....................22

Storing song information to an

iPod (iTunes Tagging) .............................22

Operating with the hardware buttons .........22

Playing a disc

Using the touch panel keys (for audio) .......23

Using the touch panel keys (for video) ........23

Reading the screen (for audio) .....................23

Reading the screen (for video) .....................23

Starting procedure .........................................24

Selecting files from the file name list ..........24

Playing tracks in random order ....................24

Setting a repeat play range...........................24

Switching the media file type .......................24

Searching for the part you want to play ......24

Operating the DVD menu .............................25

Switching the subtitle language ..................25

Switching the audio language .....................25

Frame-by-frame playback .............................25

Slow motion playback ...................................25

Returning to a specified scene .....................25

Resuming playback (Bookmark) .................25

Operating the DVD menu using

touch panel keys .....................................25

Switching the multi-angle DVD display ......25

Selecting the audio output ...........................26

Operating with the hardware buttons .........26

Playing compressed

audio files

Using the touch panel keys ..........................26

Reading the screen ........................................26

Starting procedure (for Disc) .......................27

Starting procedure (for USB/SD).................27

Switching the browse mode .........................27

Selecting files from the file name list ..........27

Selecting a file from the list

related to the song currently

playing (link search) ...............................27

Playing files in random order .......................27

Setting a repeat play range...........................28

Switching the media file type .......................28

Operating with the hardware buttons .........28

Playing compressed

video files

Using the touch panel keys ..........................28

Reading the screen ........................................28

Starting procedure (for Disc) .......................28

Starting procedure (for USB/SD).................29

Selecting files from the file name list ..........29

Setting a repeat play range...........................29

Frame-by-frame playback .............................29

Slow motion playback ...................................29

Switching the media file type .......................29

Operating with the hardware buttons .........29

Playing compressed

still image files

Using the touch panel keys ..........................29

Reading the screen ........................................30

Starting procedure .........................................30

Selecting files from the file name list ..........30

Playing files in random order .......................30

Setting a repeat play range...........................30

Switching the media file type .......................30

Setting the slideshow interval .....................30

Operating with the hardware buttons .........30

Using an iPod

Using the touch panel keys (for audio) .......31

Using the touch panel keys (for video) ........31

Reading the screen (for audio) .....................31

Reading the screen (for video) .....................31

Starting procedure .........................................32

Setting the shuffle play .................................32

Setting a repeat play range...........................32

Selecting song or video sources

from the playlist screen ..........................32

Using this product’s iPod func-

tion from your iPod .................................32

Changing the speed of audio-

book playback .........................................33

Displaying lists related to the

song currently playing (link search) .....33

Operating with the hardware buttons .........33

Playing back music from a

music app other than iPod

music, as the iPod source ......................33

Using the touch panel keys .............................. 33

Reading the screen ............................................ 33

Using your iPhone or

smartphone applications

Using AppRadio Mode ..................................33

Using the touch panel keys (App

control side bar) .......................................... 34

Starting procedure ............................................ 34

Using the keyboard ............................................ 34

Adjusting the image size (For

smartphone users) ..................................... 35

Displaying the image of your appli-

cation (iPhone with 30-pin connector) ..... 35

Displaying the image of your appli-

cation (iPhone with Lightning

connector) ................................................... 35

Displaying the image of your appli-

cation (smartphone) ................................... 35

Using MirrorLink ............................................36

Using the touch panel keys (App

control side bar) .......................................... 36

Starting procedure ............................................ 36

Using the audio mix function .......................36

Streaming Pandora®

Pandora operations .......................................36

Using the touch panel keys ..........................37

Reading the screen ........................................37

Starting procedure .........................................37

For iPhone with a 30-pin connector users ...... 37

For iPhone with a Lightning connec-

tor users ....................................................... 37

For smartphone users ....................................... 37

Selecting a Pandora station from the list ...38

Add station .....................................................38

Operating with the hardware buttons .........38

Using Aha Radio

Using the touch panel keys ..........................38

Reading the screen ........................................38

Starting procedure .........................................39

For iPhone with a 30-pin connector users ...... 39

For iPhone with a Lightning connec-

tor users ....................................................... 39

For smartphone users ....................................... 39

Operating with the hardware buttons .........39

Using iDatalink

Starting procedure .........................................39

Hands-free phone ..........................................40

Setting Bluetooth .............................................. 40

Phone Book screen ........................................... 40

History list screen .............................................. 40

Dial screen .......................................................... 40

Dial confirmation screen .................................. 40

Using a Bluetooth

audio player

Using the touch panel keys ..........................41

Reading the screen ........................................41

Starting procedure .........................................41

Selecting files from the file name list ..........41

Playing files in random order .......................42

Setting a repeat play range...........................42

Operating with the hardware buttons .........42

Using the SiriusXM® tuner

SiriusXM tuner operations ............................42

Subscribing to the SiriusXM

Satellite Radio service ............................... 42

Using the touch panel keys ..........................42

Reading the screen ........................................43

Starting procedure .........................................43

Manual tuning ................................................43

Selecting a preset channel from

the preset channel list ............................43

Storing broadcast channels .........................43

Selecting a SiriusXM channel directly ........43

Selecting a channel from a list of

all channels .............................................44

Selecting a channel from the

category list .............................................44

Switching the displayed list .........................44

Using the Replay™ function .........................44

Setting SiriusXM TuneStart™ ......................44

Using TuneScan™ ..........................................44

Using category scan ......................................45

Setting parental lock .....................................45

Setting the passcode ......................................... 45

Locking the channel .......................................... 45

Using the content alerts function

(such as Song Alerts, Artist

Alerts and Game Alerts) .........................45

Memorizing the current contents .................... 45

Setting the program you want to

be alerted for............................................45

Selecting teams for Game Alert ...................45

Restoring the SiriusXM settings

to the default ...........................................46

Storing song information to an

iPod (iTunes Tagging) .............................46

Operating with the hardware buttons .........46

Using an HDMI source

Using the touch panel keys ..........................46

Reading the screen ........................................46

Starting procedure .........................................46

Using an AUX source

Using the touch panel keys ..........................46

Reading the screen ........................................47

Starting procedure .........................................47

Setting the video signal ................................47

Switching the operation screen ...................47

Using AV input

Using the touch panel keys ..........................47

Reading the screen ........................................47

Starting procedure .........................................47

Setting the video signal ................................48

Using MIXTRAX

MIXTRAX operation .......................................48

Touch panel keys............................................48

Selecting an item to play songs ...................48

Selecting songs not to be played .................48

Specifying the playback portion ..................48

Setting the flash pattern ...............................48

System settings

Activating the Bluetooth audio source .......49

Setting the ever scroll ...................................49

Setting AV input .............................................49

Setting the rear view camera........................49

Setting rear view camera activation ................ 49

Setting the polarity of the rear view camera .. 49

Setting the camera for Camera

View mode ...............................................50

Displaying the parking assist guidelines ....50

Setting guidelines on the rear

view image ...............................................50

Turning off the demo screen .........................50

Selecting the system language ....................51

Setting the keyboard language

with the application for iPhone .............51

Setting the beep sound .................................51

Adjusting the response positions

of the touch panel (touch

panel calibration) ....................................51

Adjusting the picture .....................................51

Displaying the firmware version ..................52

Updating firmware .........................................52

Checking the connections of leads .............52

Audio adjustments

Using fader/balance adjustment .................52

Using balance adjustment............................53

Switching sound muting/attenuation .........53

Adjusting source levels .................................53

Adjusting the filter .........................................54

Adjusting the front and rear speaker output .. 54

Using the subwoofer output ............................. 54

Selecting the listening position ...................54

Adjusting the speaker output

levels finely ..............................................55

Adjusting the time alignment ......................55

Using the equalizer ........................................56

Recalling equalizer curves ............................... 56

Customizing the equalizer curves ................... 56

Using the auto-adjusted equalizer ................... 56

Adjusting the equalizer curve

automatically (Auto EQ) .........................56

Before operating the Auto EQ function ........... 56

Performing Auto EQ .......................................... 57

Theme menu

Setting the illumination color ......................57

Selecting the color from the preset colors ..... 57

Creating a user-defined color ........................... 58

Selecting the background display ...............58

Changing to the background

display image stored on the

external device (USB/SD) .......................... 58

Selecting the theme color .............................58

Selecting the clock image ............................58

Changing the preinstalled splash screen ...59

Changing to the splash screen

stored on the external device

(USB/SD) ..................................................... 59

Replicating the settings ................................59

Exporting “Theme” settings ............................. 59

Importing “Theme” settings ............................. 59

Setting up the video player

Setting the top-priority languages ...............59

Setting the subtitle language ........................... 59

Setting the audio language .............................. 59

Setting the menu language .............................. 60

Setting the angle icon display ......................60

Setting the aspect ratio .................................60

Setting parental lock .....................................60

Setting the code number and level .................. 60

Displaying your DivX VOD regis-

tration code ..............................................61

Displaying your DivX VOD

deregistration code .................................61

Automatic playback of DVDs .......................61

Setting the video signal for the

rear view camera .....................................61

Language code chart for DVDs ....................62

Favorite menu

Selecting a shortcut ......................................62

Removing a shortcut .....................................62

Common operations

Setting the time and date .............................62

Storing song information to an

iPod (iTunes Tagging) .............................62

Setting the “Sound Retriever” function ......63

Changing the wide screen mode .................63

Other functions

Selecting the video for the rear display.......63

Setting the anti-theft function ......................64

Setting the password ........................................ 64

Entering the password ...................................... 64

Deleting the password ...................................... 64

Forgotten password ........................................... 64

Restoring this product to the

default settings .......................................64

Restoring the default settings .......................... 64

Precautions

Your new product and this manual ..............65

Important safeguards ....................................65

Connection

Precautions before connecting

the system ................................................65

Before installing this product .......................65

To prevent damage ........................................65

Notice for the blue/white lead .......................... 66

Connecting the power cord ..........................67

Connecting to separately sold

power amp ...............................................68

Connecting an iPhone with

Lightning connector ...............................68

Connecting via the USB port ............................ 68

Connecting via the HDMI port ......................... 68

Connecting an iPhone with

30-pin connector .....................................69

Connecting via the AUX input .......................... 69

Connecting via the RGB input .......................... 69

Connecting the Android™ device ................69

Connecting an Android device with

an HDMI port ............................................... 69

Connecting an Android device with

an MHL port ................................................. 69

Connecting the MirrorLink™ device ............69

Securing the High Speed HDMI® Cable ....70

Connecting a rear view camera....................70

Connecting the external video

component ...............................................70

Using AV input ................................................... 70

Using an AUX input ........................................... 71

Connecting an HDMI device ........................71

Connecting the rear display .........................71

When using a rear display con-

nected to rear video output........................ 71

Installation

Precautions before installation ....................71

Before installing .............................................71

Installing this product ...................................71

Installation notes ............................................... 71

Installation using the screw holes

on the side of this product ......................... 72

Fastening the front panel .................................. 72

Installing the microphone ............................72

Mounting on the sun visor ................................ 72

Installation on the steering column ................ 73

Adjusting the microphone angle ..................... 73

Appendix

Troubleshooting .............................................73

Error messages ..............................................74

Handling and care of discs ...........................78

Built-in drive and care ....................................... 78

Ambient conditions for playing a disc ............ 78

Playable discs ................................................78

DVD-Video and CD ............................................ 78

AVCHD recorded discs ..................................... 78

Playing DualDisc ............................................... 79

Dolby Digital ....................................................... 79

Detailed information for playable media ....79

Compatibility ...................................................... 79

Media compatibility chart ................................. 80

Bluetooth ........................................................82

SiriusXM® satellite radio .............................82

HD Radio™ Technology ................................82

SDHC...............................................................82

WMA/WMV .....................................................82

DivX .................................................................82

AAC ..................................................................83

Android™ ........................................................83

MirrorLink .......................................................83

Detailed information regarding

connected iPod devices .........................83

iPod and iPhone ................................................. 83

Lightning ............................................................. 83

App Store ............................................................ 83

iOS 83

iTunes .................................................................. 83

Using app-based connected content ..........83

Pandora® ............................................................ 83

Aha Radio ........................................................... 83

HDMI ...............................................................83

MHL .................................................................83

Notice regarding video viewing ...................83

Notice regarding DVD-Video viewing ..........83

Notice regarding MP3 file usage .................84

Using the LCD screen correctly ...................84

Handling the LCD screen .................................. 84

Liquid crystal display (LCD) screen ................ 84

Maintaining the LCD screen ............................. 84

LED (light-emitting diode) backlight ............... 84

Specifications ................................................85

Precaution

Information to User

Contains FCC ID : RKXFC6000TS Contains IC : 5119A-FC6000TS

This device complies with Part 15 of FCC

Rules and Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

This transmitter must not be co-located

or operated in conjunction with any other antenna or transmitter.

The Bluetooth antenna cannot be

removed (or replaced) by user.

This equipment complies with FCC/

IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

Alteration or modifications carried out

without appropriate authorization may invalidate the user’s right to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving

antenna.

— Increase the separation between the

equipment and receiver.

— Connect the equipment into an outlet

on a circuit different from that to which the receiver is connected.

— Consult the dealer or an experienced

radio/TV technician for help.

CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.

CAUTION

This product is a Class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007, and contains a class 1M laser module. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.

CAUTION—CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN, DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.

WARNING

Handling the cord on this product or cords associated with accessories sold with the product may expose you to chemicals listed on proposition 65 known to the State of California and other governmental entities to cause cancer and birth defect or other reproductive harm. Wash hands after handling.

■ The Safety of Your Ears is in

Your Hands

Get the most out of your equipment by playing it at a safe level—a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

■ ESTABLISH A SAFE LEVEL:

Set your volume control at a low setting. Slowly increase the sound until you can

hear it comfortably and clearly, without distortion.

Once you have established a comfortable

sound level, set the dial and leave it there.

■ BE SURE TO OBSERVE THE

FOLLOWING GUIDELINES:

Do not turn up the volume so high that

you can’t hear what’s around you.

Use caution or temporarily discontinue

use in potentially hazardous situations.

Do not use headphones while operating a

motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.

Chapter

License, Warranty Disclaimer & Limitation of Liability

■ SAFETY PROVISIONS

■ Disclaimer

THE WARRANTIES SET FORTH IN PIONEER’S LIMITED WARRANTY ARE THE ONLY WARRANTIES MADE BY PIONEER OR ANY OF ITS LICENSORS, AS APPLICABLE. PIONEER AND ITS LICENSORS EXPRESSLY DISCLAIM ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

■ Limitation of Liability

TO THE MAXIMUM EXTENT PERMISSIBLE UNDER APPLICABLE LAW, NEITHER PIONEER NOR ITS LICENSORS WILL BE LIABLE TO YOU OR TO ANY OTHER PARTY FOR ANY INDIRECT, CONSEQUENTIAL, INCIDENTAL, PUNITIVE, OR SPECIAL DAMAGES, REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT OR IN TORT, INCLUDING NEGLIGENCE, EVEN IF SUCH PARTIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE MAXIMUM EXTENT PERMISSIBLE UNDER APPLICABLE LAW, PIONEER’S, OR ITS LICENSORS’, TOTAL LIABILITY OF ANY KIND ARISING OUT OF OR RELATED TO YOUR USE OF THE PRODUCTS, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY CLAIMS, OR ANY CLAIMS FOR PROPERTY DAMAGE, DEATH OR DISABILITY, REGARDLESS OF THE FORUM AND REGARDLESS OF WHETHER ANY ACTION OR CLAIM IS BASED ON CONTRACT,

English

Chapter

TORT, (INCLUDING NEGLIGENCE), STRICT

PRODUCT LIABILITY, OR ANY OTHER LEGAL THEORY, WILL NOT EXCEED ONE THOUSAND DOLLARS (USD$1 000). SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF DAMAGES OR LIMITATION OF LIABILITY, SO THE ABOVE EXCLUSIONS OR LIMITATIONS, TO THE EXTENT PROHIBITED BY APPLICABLE LAW, MAY NOT APPLY TO YOU. YOUR SPECIFIC RIGHTS MAY VARY FROM JURISDICTION TO JURISDICTION.

Important safety information

WARNING

Do not attempt to install or service this

product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.

Do not allow this product to come into

contact with liquids. Electrical shock could result. Also, damage to the product, smoke, and overheating could result from contact with liquids.

If liquid or foreign matter should get

inside this product, park your vehicle in a safe place, turn the ignition switch off (ACC OFF) immediately and consult your dealer or the nearest authorized Pioneer Service Station. Do not use this product in this condition because doing so may result in a fire, electric shock, or other failure.

If you notice smoke, a strange noise

or odor from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorized Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.

Do not disassemble or modify this prod-

uct, as there are high-voltage components inside which may cause an electric shock. Be sure to consult your dealer or the nearest authorized Pioneer Service

Station for internal inspection, adjust-

ments or repairs. Before using this product, be sure to read and fully understand the following safety information:

Do not operate this product, any applica-

tions, or the rear view camera option (if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations. If you experience difficulty in operating this product or reading the display, park your vehicle in a safe location and apply the parking brake before making the necessary adjustments.

Never set the volume of this product so

high that you cannot hear outside traffic and emergency vehicles.

To promote safety, certain functions are

disabled unless the vehicle is stopped and/or the parking brake is applied.

Keep this manual handy as a reference

for operating procedures and safety information.

Do not install this product where it may

(i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems or safety features, including air bags or hazard lamp buttons or (iii) impair the driver’s ability to safely operate the vehicle.

Please remember to fasten your seat belt

at all times while operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled.

Never use headphones while driving.

Parking brake interlock

Certain functions (such as viewing of video image and certain touch panel key operations) offered by this product could be dangerous (possibly resulting in serious injury or death) and/or unlawful if used while driving. To prevent such functions from being used while the vehicle is in motion, there is an interlock system that senses when the parking brake is set and when the vehicle is moving. If you attempt to use the functions described above while driving, they will

become disabled until you stop the vehicle in a safe place, and (1) apply the parking brake, (2) release the parking brake, and then (3) apply the parking brake again. Please keep the brake pedal pushed down before releasing the parking brake.

■ To ensure safe driving

WARNING

LIGHT GREEN LEAD AT POWER

CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.

Do not take any steps to tamper with or

disable the parking brake interlock system which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or death.

To avoid the risk of damage and injury

and the potential violation of applicable laws, this product is not for use with a video image that is visible to the driver.

In some countries the viewing of video

image on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed.

If you attempt to watch video image while driving, the warning “Viewing of front seat

video source while driving is strictly prohibited.” will appear on the screen. To watch

video image on this display, stop the vehicle in a safe place and apply the parking brake. Please keep the brake pedal pushed down before releasing the parking brake.

When using a display connected to V OUT

The video output terminal (V OUT) is for connection of a display to enable passengers in the rear seats to watch video images.

WARNING

NEVER install the rear display in a location that enables the driver to watch video images while driving.

To avoid battery exhaustion

Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery.

WARNING

Do not install this product in a vehicle that does not have an ACC wire or circuitry available.

Rear view camera

With an optional rear view camera, you are able to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot.

WARNING

SCREEN IMAGE MAY APPEAR

REVERSED.

USE INPUT ONLY FOR REVERSE OR

MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE.

CAUTION

The rear view mode is to use this product as an aid to keep an eye on the trailers, or while backing up. Do not use this function for entertainment purposes.

Handling the SD card slot

CAUTION

Keep the SD memory card out of the

reach of small children to prevent them from accidentally swallowing it.

To prevent data loss and damage to the

storage device, never remove it from this product while data is being transferred.

If data loss or corruption occurs on the

storage device for any reason, it is usually not possible to recover the data. Pioneer accepts no liability for damages, costs or expenses arising from data loss or corruption.

Never insert or eject an SD memory card

while driving.

Handling the USB connector

CAUTION

To prevent data loss and damage to the

storage device, never remove it from this product while data is being transferred.

Pioneer cannot guarantee compatibility

with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.

Important (Serial Number:)

The serial number of this device is located on the bottom of this product. For your own security and convenience, be sure to record this number on the enclosed warranty card.

Failure to operate

After-sales service for Pioneer products

Please contact the dealer or distributor from which you purchased the product for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below. Please do not ship your product to the companies at the addresses listed below for repair without making advance contact. — U.S.A Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA

90801-1760 800-421-1404 — CANADA Pioneer Electronics of Canada, Inc. CUSTOMER SATISFACTION

DEPARTMENT 340 Ferrier Street, Unit 2, Markham,

Ontario L3R 2Z5, Canada 1-877-283-5901 905-479-4411 For warranty information, please see the Limited Warranty sheet included with your product.

Visit our website

Visit us at the following site: http://www.pioneerelectronics.com In Canada http://www.pioneerelectronics.ca 1 Register your product. 2 Receive updates on the latest products

and technologies.

3 Download owner’s manuals, order prod-

uct catalogs, research new products, and much more.

4 Receive notices of software upgrades and

software updates.

Protecting the LCD panel and screen

p Do not expose the LCD screen to direct

sunlight when this product is not used. This may result in LCD screen malfunction due to the resulting high temperatures.

p When using a cellular phone, keep the

antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc.

p To protect the LCD screen from damage,

be sure to touch the touch panel keys only with your finger and do so gently.

Notes on internal memory

■ Before removing the vehicle

battery

If the battery is disconnected or discharged, the memory will be erased and must be reprogrammed. p Some of the settings and recorded con-

tents will not be reset.

■ Data subject to erasure

The information is erased by disconnecting the yellow lead from the battery (or removing the battery itself). p Some of the settings and recorded con-

tents will not be reset.

■ Resetting the microprocessor

CAUTION

Pressing the RESET button resets set- tings and recorded contents to the factory settings. p Do not perform this operation when a

device is connected to this product.

p Some of the settings and recorded

contents will not be reset. The microprocessor must be reset under the following conditions:

Prior to using this product for the first

time after installation.

If this product fails to operate properly. If there appears to be problems with the

operation of the system.

If your vehicle position is shown on the

map with a significant positioning error.

1 Turn the ignition switch OFF. 2 Press the RESET button with a pen

tip or other pointed implement.

Settings and recorded contents are reset to the factory settings.

1 RESET button

About this manual

This manual uses diagrams of actual screens to describe operations. However, the screens on some units may not match those shown in this manual depending on the model used.

Use and care of the remote control

■ Installing the battery

Slide the tray on the back of the remote control out and insert the battery with the plus (+) and minus (–) poles aligned properly.

When using for the first time, pull out the

film protruding from the tray.

WARNING

Keep the battery out of the reach of chil-

dren. Should the battery be swallowed, consult a doctor immediately.

Batteries (battery pack or batteries

installed) must not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION

Remove the battery if the remote control

is not used for a month or longer.

There is a danger of explosion if the bat-

tery is incorrectly replaced. Replace only with the same or equivalent type.

Do not handle the battery with metallic

tools.

Do not store the battery with metallic

objects.

If the battery leaks, wipe the remote

control completely clean and install a new battery.

When disposing of used batteries, com-

ply with governmental regulations or environmental public institutions’ rules that apply in your country/area.

“Perchlorate Material – special handling

may apply. See www.dtsc.ca.gov/hazardouswaste/ perchlorate. (Applicable to California, U.S.A.)”

Chapter

English

Chapter

■ Using the remote control

Point the remote control in the direction of the front panel to operate.

The remote control may not function

properly in direct sunlight.

Important

Do not store the remote control in high

temperatures or direct sunlight.

Do not let the remote control fall onto

the floor, where it may become jammed under the brake or accelerator pedal.

Basic operation

Checking part names and functions

This chapter gives information about the names of the parts and the main features using the buttons.

1 2 3 4 5 6 7 8

1 LCD screen 2 VOL (+/–) button

Press to adjust the AV (Audio and Video) source volume.

3 MUTE button

Press to mute. Press again to unmute.

4 HOME button

Press to display the Top menu screen.

For details of the operations, refer to How

to use the screens on page 11.

Press and hold the HOME button to

activate the voice recognition function.

For details, refer to Using the voice recog-

nition function (for iPhone) on page 18.

5 MODE button

Press to switch between the Application

screen and the AV operation screen.

p If the display cannot switch from the

AV operation screen to the Application screen when the MODE button is pressed, the display will turn off.

For details of the operations, refer to How

to use the screens on page 11.

Press and hold to turn the display off.

For details, refer to Turning off the display

on page 10.

6 TRK button

Press to perform manual seek tuning, fast forward, reverse and track search controls.

button

8 RESET button

For details of the operations, refer to

Resetting the microprocessor on page 7.

9 Auto EQ microphone input jack

Use to connect a microphone for acoustical measurement (sold separately).

a Disc-loading slot

Insert a disc to play.

For details, refer to Inserting and ejecting

a disc on page 9.

b SD card slot

For details, refer to Inserting and ejecting

an SD memory card on page 10.

Remote control

1 VOLUME (+/–) 2 REAR SRC

Press to cycle through all the available

rear sources.

Press and hold to turn the rear source

off.

3 SRC/OFF

Press to cycle through all the available

front sources.

Press and hold to turn the front source

off.

4 Source mode select switch

Use to switch the source mode between the front source and the rear source.

5 Thumb pad

Use to select a menu on the DVD menu.

6 RETURN

Returns to the specified point and begins playback from there.

Press to pause or resume playback.

For audio

Press and hold to perform fast reverse.

For video

Press to perform fast reverse. Press to change the fast reverse speed.

For audio

Press and hold to perform fast forward.

For video

Press to perform fast forward. Press to change the fast forward speed.

Press to return to the previous track (chapter).

Press to go to the next track (chapter).

Press to stop playback. If you resume playback, playback will start from the point where you stopped. Touch the key again to stop playback completely.

8 FOLDER/P.CH

Press to select the next or previous disc

or folder.

Press to recall radio station frequencies

assigned to preset channel keys.

9 MUTE

Press to mute. Press again to unmute.

a MENU

Press to display the DVD menu during DVD playback.

TOP MENU

Press to return to the top menu during DVD playback.

b AUDIO

Press to change the audio language during DVD playback.

SUBTITLE

Press to change the subtitle language during DVD playback.

ANGLE

Press to change the viewing angle during DVD playback.

c BAND/ESC

Press to select the tuner band when

tuner is selected as a source.

Press to cancel the control mode of

functions.

Press to switch between media file types

when playing the following types of data:

— Disc — External storage device (USB, SD)

Protecting your product against theft

CAUTION

Do not attempt to detach the front panel

while DISC/SD is in the eject position.

Do not attempt to detach the front panel

while data is being written to USB/SD.

Doing so may cause the data to become

corrupted.

After the front panel has been detached,

the attaching plate will move back to its original position automatically.

Be careful not to let hands or other

objects get caught behind the monitor as it is moving back.

Please make sure that the front panel is

in its original position while the vehicle is in motion.

It is dangerous to drive with the front

panel sticking out.

Do not place beverages or other objects

on top of the front panel while it is fully open.

Important

Handle the front panel with care when

removing or attaching it.

Avoid subjecting the front panel to exces-

sive shock.

Keep the front panel out of direct sun-

light and high temperatures.

If removed, replace the front panel on the

unit before starting up your vehicle.

■ Removing the front panel

1 Press the button. 2 Touch the following key.

The front panel automatically slides toward you.

3 Slide the dial at the bottom of the

front panel to the right, and lift up the front panel while pushing down on the dial.

4 Put the front panel into the pro-

vided protective case for safe keeping.

■ Attaching the front panel

1 Slide the front panel into the top of

the unit and push it into place.

Slide the inserter on the front panel into the insertion slot on top of the unit and push it into place.

2 Push on the bottom of the front

panel until it clicks into place.

Notes on using the LCD panel

WARNING

Keep hands and fingers clear of this

product when opening, closing, or

adjusting the LCD panel. Be especially

cautious of children’s hands and fingers.

Do not use with the LCD panel left open.

If the LCD panel is left open, it may result

in injury in the event of an accident.

CAUTION

Do not open or close the LCD panel by

force. This may cause a malfunction.

Do not operate this product until the LCD

panel has completely opened or closed.

If this product is operated while the LCD

panel is opening or closing, the LCD

panel may stop at that angle for safety.

Do not place a glass or can on the open

LCD panel. Doing so may break this

product.

Adjusting the LCD panel angle

1 Press the button. 2 Touch the following keys to adjust

the angle of the LCD panel.

Laying the panel down.

Returning the panel to the upright position.

3 Touch the following key.

Returns to the previous screen.

p The adjusted angle of the LCD panel will

be memorized and the LCD panel will automatically return to that angle the next time the LCD panel is opened or closed.

Inserting/ejecting/connecting media

CAUTION

Do not insert anything other than a disc

into the disc-loading slot.

Do not insert anything other than SD

memory cards into the SD card slot.

Ejecting an SD memory card during data

transfer can damage the SD memory card. Be sure to eject the SD memory card by the procedure described in this manual.

Do not press the button when an SD

memory card is not fully inserted. Doing so may damage the card.

Do not press the button before an

SD memory card has been completely removed. Doing so may damage the card.

■ Inserting and ejecting a disc

Inserting a disc

1 Press the 2 Touch the following key.

3 Insert a disc into the disc-loading

slot.

The disc is loaded, and the LCD panel closes.

Ejecting a disc

1 Press the

button.

Opens the LCD panel.

button.

Chapter

English

Chapter

2 Touch the following key.

The LCD panel opens, and the disc is ejected.

2 Touch the following key.

Opens the LCD panel.

2 Plug a USB storage device into the

USB cable.

3 Touch the following key.

Displays the “Smartphone Setup” screen.

3 Remove the disc, and press the

button.

The LCD panel closes.

■ Inserting and ejecting an SD

memory card

p This system is not compatible with the

Multi Media Card (MMC).

p Compatibility with all SD memory cards is

not guaranteed.

p This product may not achieve optimum

performance with some SD memory cards.

Inserting an SD memory card

1 Press the

button.

2 Touch the following key.

Opens the LCD panel.

3 Insert an SD memory card into the

SD card slot.

Insert it with the label surface face-up and press the card until it clicks and completely locks.

4 Press the button.

The LCD panel closes.

Ejecting an SD memory card

1 Press the

button.

3 Press the middle of the SD mem-

ory card gently until it clicks.

4 Pull the SD memory card out

straight.

5 Press the

The LCD panel closes.

button.

■ Connecting and disconnecting

an iPod

Connecting your iPod

For details, refer to Connecting an iPhone

with Lightning connector on page 68.

For details, refer to Connecting an iPhone

with 30-pin connector on page 69.

Disconnecting your iPod

Pull out the cables after confirming

that no data is being accessed.

■ Plugging and unplugging a USB

storage device

p This product may not achieve optimum

performance with some USB storage devices.

p Connection via a USB hub is not possible. p A USB cable is required for connection.

Plugging in a USB storage device

1 Pull out the plug from the USB port

of the USB cable.

1 USB cable 2 USB storage device

Unplugging a USB storage device

Pull out the USB storage device

after checking that no data is being

accessed.

Startup and termination

1 Start the engine to boot up the

system.

After a short pause, the splash screen comes on for a few seconds.

2 Turn off the vehicle engine to ter-

minate the system.

This product is also turned off.

On Ærst-time startup

When you use this product for the first time, select the language that you want to use.

1 Start the engine to boot up the

system.

After a short pause, the splash screen comes on for a few seconds. The “Select Program Language” screen appears.

2 Touch the language that you want

to use on screen.

4 Touch the item you want to set.

For details, refer to Information on the

connections and functions for each device on page 19.

5 Touch the following key.

Displays the Top menu screen.

If you touch , the display returns to the

previous screen.

Regular startup

Start the engine to boot up the

system.

After a short pause, the splash screen comes on for a few seconds. p The screen shown will differ depending

on the previous conditions.

p If the anti-theft function is activated, you

must enter your password.

Turning off the display

You can turn off the display at night or when the screen is too bright.

Press and hold the MODE button.

The display turns off. p If you touch the screen when the display

is off, it reverts to the original screen.

How to use the screens

■ Switching screens using the touch panel keys

■ Switching screens using the hardware buttons

1 Top menu screen

This is the starting menu to access the desired screens and operate the various functions.

p If you press the HOME button, the Top

menu screen is displayed.

2 Time and date setting screen

You can set the time and date settings.

3 Setting menu screen

You can customize the system and audio settings, etc.

4 Phone menu screen

You can access the screen that is related to hands-free phoning.

5 AV source selection screen

You can select the AV source.

6 Favorite source icons

You can display the icons of frequently used sources by dragging the icons to the display area.

For details of the operation, refer to

Changing the display order of source

icons on page 12.

7 AV operation screen

You can customize the settings for each source.

8 Application operation screen

You can control the iPhone or smartphone applications directly on this product. p If applications are not available, the

Application operation screen will not be

displayed.

9 Application menu screen

This product can switch to the application menu, on which you can display and operate the application for an iPhone or a smartphone on the screen. p If application menus are not available,

the Application menu screen will not be

displayed.

Supported AV source

You can play or use the following sources with this product.

HD Radio (HD Radio™ tuner) CD ROM (compressed audio files)

DVD-Video USB

SD The following sources can be played back or used by connecting an auxiliary device.

iPod

iDatalink

Pandora®

Aha Radio

Bluetooth audio

SiriusXM™ tuner AV input (AV) AUX HDMI

Displaying the AV operation screen

1 Press the HOME button to display

the Top menu screen.

2 Touch the AV operation key.

1 AV operation key The AV operation screen appears.

132

1 Displays the source list.

For details, refer to Selecting a front

source on the source list on page 12.

2 Displays the Time and date setting

screen.

For details, refer to Setting the time and

date on page 62.

3 Displays the Setting menu screen. 4 Recalls equalizer curves.

For details, refer to Using the equalizer on

page 56.

5 Displays the Phone menu screen.

For details, refer to Displaying the phone

menu on page 15.

Chapter

English

Chapter

■ Selecting a front source on the

AV source selection screen

1 Press the HOME button to display

the Top menu screen.

2 Touch the following key.

Displays the AV source selection screen.

3 Touch the source icon you want to

select.

The AV operation screen of the selected source appears.

■ Selecting a front source on the

source list

1 Press the HOME button to display

the Top menu screen.

2 Touch the AV operation key.

1 AV operation key The AV operation screen appears.

3 Touch the following key.

Displays the source list.

4 Touch the source key you want to

select.

The AV operation screen of the selected source appears.

■ Selecting a rear source

You can select a source output to the rear display.

For details of the operations, refer to

Selecting the video for the rear display on page 63.

Turning off the AV source

Turn off the AV source to stop playing or receiving the AV source.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following key.

Displays the AV source selection screen.

3 Touch [OFF].

The AV source is turned off.

Changing the display order of source icons

You can change the display order of source icons on the AV source selection screen.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following key.

Displays the AV source selection screen.

3 Touch and hold a source icon,

and drag the icon to the desired position.

p If the source icon is moved, the order of

the source list is also changed.

Changing the display order of source keys

You can change the display order of source keys on the source list.

1 Press the HOME button to display

the Top menu screen.

2 Touch the AV operation key.

1 AV operation key The AV operation screen appears.

3 Touch the following key.

Displays the source list.

4 Touch [Open].

The source keys can be moved.

5 Drag the source key to the desired

position.

6 Touch [Close].

Returns to the previous screen. p If the source key is moved, the source

icons displayed on the Top menu screen and the AV source screen are also moved.

Using the touch panel

You can operate this product by touching the marks and items (touch panel keys) displayed on the screen directly with your fingers. p To protect the LCD screen from damage,

be sure to touch the touch panel keys only with your finger and do so gently.

■ Using the common touch panel

keys

1 2

1 Returns to the previous screen. 2 Closes the screen.

■ Operating list screens

1 Touching an item on the list allows you to

narrow down the options and proceed to the next operation.

2 Appears when all characters are not

displayed on the display area.

If you touch the key, the rest of the char-

acters are scrolled for display.

3 Appears when items cannot be displayed

on a single page only.

Drag the scrubber bar to view any hidden

items.

Also, you can drag the list to view any

hidden items.

■ Operating the time bar

1 You can change the playback point by

dragging the key.

p Playback time corresponding to the posi-

tion of the key is displayed while dragging the key.

■ Operating the on-screen

keyboard

8 7

1 Displays the characters that are entered.

If there is no text in the box, an informative guide with text appears.

2 Allows you to move the cursor to the right

or left for a number of characters equivalent to the number of touches.

3 Touching the keys enters the characters

in the text box.

4 Deletes the input text one letter at a

time, beginning at the end of the text. Continuing to touch the key deletes all of the text.

5 Confirms the entry and allows you to

proceed to the next step. 6 You can leave spaces. A space equivalent to the number of

touches is inserted. 7 Switches between alphabet and

numbers/symbols. 8 You can switch between capital and lower

case letters.

Registering and connecting a Bluetooth device

If your devices feature Bluetooth® technology, this product can be connected to your devices wirelessly. This section describes how to set up a Bluetooth connection.

For details about connectivity with the devices featuring Bluetooth wireless technology, refer to the information on our website.

Preparing communication devices

This product has a built-in function that enables using devices featuring Bluetooth wireless technology.

For details, refer to Notes for hands-free

phoning on page 18.

You can register and use devices that feature the following profiles with this product.

HFP (Hands-Free Profile)

A2DP (Advanced Audio Distribution

Profile)

SPP (Serial Port Profile)

p When this product is turned off, the

Bluetooth connection is also disconnected. When the system restarts, the system automatically attempts to reconnect the previously-connected device. Even when the connection is severed for some reason, the system automatically reconnects the specified device (except when the connection is severed due to device operation).

Registering your Bluetooth devices

You need to register your devices featuring Bluetooth wireless technology when you connect it to this product for the first time. A total of three devices can be registered. Two registration methods are available:

Searching for nearby Bluetooth devices Pairing from your Bluetooth devices

p If three devices are already paired,

“Memory Full” is displayed and pairing cannot be performed. In such cases, delete a paired device first.

For details, refer to Deleting a registered

device on page 14.

■ Searching for nearby Bluetooth

devices

The system searches for available Bluetooth devices near this product, displays them in a list, and registers them for connection. p When the device is already connected,

this function is inactive.

1 Activate the Bluetooth wireless

technology on your devices.

p For some Bluetooth devices, no specific

action is necessary to activate Bluetooth wireless technology. For details, refer to the instruction manual of your devices.

2 Press the HOME button to display

the Top menu screen.

3 Touch the following keys in the

following order.

The “Bluetooth” screen appears.

4 Touch [Connection]. 5 Touch the following key.

Starts searching.

The system searches for Bluetooth devices waiting for a connection and displays them in the list if a device is found. p Up to 30 devices will be listed in the order

that the devices are found.

6 Wait until your Bluetooth device

appears in the list.

p If you cannot find the Bluetooth device

that you want to connect, check that the device is waiting for a Bluetooth wireless technology connection.

7 Touch the Bluetooth device name

you want to register.

While connecting, “Pairing… Please wait.” is displayed. If the connection is established, “Paired.” is displayed. p If your device supports SSP (Secure

Simple Pairing), a six-digit number appears on the display of this product. Touch [Yes ] to pairing the device.

p If the connection fails, “Error” is dis-

played. In such cases, try again from the beginning.

p The PIN code is set to “0000” as the

default, but can be changed.

For details, refer to Entering the PIN code

for Bluetooth wireless connection on page 14.

p Once the connection is established,

the device name is displayed. Touch the

device name to disconnect. After the device is successfully registered, a Bluetooth connection is established from the system. The profile icons in the registered device list screen are displayed and illuminated as follows.

Illuminates when your mobile device is successfully connected with the HFP (Hands-Free Profile).

Illuminates when your audio device is successfully connected with the A2DP (Advanced Audio Distribution Profile)/AVRCP (Audio/Video Remote Control Profile).

Illuminates when the Bluetooth connection is established with the SPP (Serial Port Profile).

p After pairing, the phone book registered

in the device may be automatically trans-

mitted to this product.

If you touch the following key, you can

switch the display between the device

names and Bluetooth device addresses.

Switches between the device

names and Bluetooth device addresses.

■ Pairing from your Bluetooth

devices

You can register a Bluetooth device by setting this product to standby mode and requesting a connection from the Bluetooth device. p Before registration, make sure that

“Visibility” in the “Bluetooth” menu is

set to “On”.

Chapter

English

Chapter

For details, refer to Switching visibility on

page 14.

1 Activate the Bluetooth wireless

technology on your devices.

p For some Bluetooth devices, no specific

action is necessary to activate Bluetooth wireless technology. For details, refer to the instruction manual of your devices.

2 Use the Bluetooth setting in the

device to pair this product with the device.

p If a PIN code input is required, enter

a PIN code. (The default PIN code is “0000”.)

When the device is successfully regis-

tered, the connection settings are made from the device.

p If registration fails, repeat the procedure

from the beginning.

■ Connecting to a Bluetooth

device automatically

If this function is set to on, a connection between your Bluetooth device and this product will take place automatically as soon as the two devices are less than a few meters apart. Initially, this function is set to on. p If this function is set to on, a connection

with the last connected Bluetooth device will be established automatically when the ignition switch is turned on.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Bluetooth” screen appears.

3 Touch [Auto Connect] repeatedly

until the desired setting appears.

On (default):

Turns the automatic connection on.

Off:

Turns the automatic connection off.

If your Bluetooth device is ready for a Bluetooth wireless connection, a connection to this product will automatically be established. If connection fails, “Auto connection failed. Retry?” appears. Touch [Yes ] to reconnect.

To turn automatic connection off, touch

[Auto Connect] again.

p Once the connection is established for

the first time, the connection with the device will be established automatically when the ignition switch is turned on from the next time.

■ Deleting a registered device

When you have already registered three Bluetooth devices and you want to add another one, you must first delete one of the registered devices. p If a registered phone is deleted, all the

phone book entries and call history lists that correspond to the phone will be also cleared.

CAUTION

Never turn this product off while the paired Bluetooth device is being deleted.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Bluetooth” screen appears.

3 Touch [Connection]. 4 Touch the following key.

Deletes a paired device.

A message prompting you to delete a registered device appears.

5 Touch [Yes].

The device is deleted.

Connecting a registered Bluetooth device manually

Connect the Bluetooth device manually in the following cases:

Two or more Bluetooth devices are reg-

istered, and you want to manually select the device to be used.

You want to reconnect a disconnected

Bluetooth device.

Connection cannot be established auto-

matically for some reason. If you wish to start the connection manually, carry out the following procedure.

1 Activate the Bluetooth wireless

technology on your devices.

p For some Bluetooth devices, no specific

action is necessary to activate Bluetooth

wireless technology. For details, refer to

the instruction manual of your devices.

2 Press the HOME button to display

the Top menu screen. 3 Touch the following keys in the

following order.

The “Bluetooth” screen appears.

4 Touch [Connection]. 5 Touch the name of the device that

you want to connect.

Switching visibility

This function sets whether or not to make this product visible to the other device. Initially, this function is set to on.

1 Press the HOME button to display

the Top menu screen. 2 Touch the following keys in the

following order.

The “Bluetooth” screen appears.

3 Touch [Visibility] repeatedly until

the desired setting appears.

On (default):

Turns the visibility on.

Off:

Turns the visibility off.

Entering the PIN code for Bluetooth wireless connection

To connect your Bluetooth device to this product via Bluetooth wireless technology, you need to enter a PIN code on your Bluetooth device to verify the connection. The default code is “0000”, but you can change it with this function.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Bluetooth” screen appears.

3 Touch [PIN Code Input].

The “PIN Code” screen appears.

4 Touch [0] to [9] to input pin code

(up to 8 digits).

5 Touch the following key.

Stores the PIN code in this product.

Displaying the Bluetooth device address

This product can display its Bluetooth device address.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Bluetooth” screen appears.

3 Touch [Device Information].

The Bluetooth device address is displayed.

Clearing the Bluetooth memory

p This setting is available only when you

stop your vehicle in a safe place and apply the parking brake.

CAUTION

Never turn this product off while the Bluetooth memory is being cleared.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Bluetooth” screen appears.

3 Touch [Bluetooth Memory Clear]. 4 Touch [Clear].

The confirmation screen appears.

5 Touch [OK].

The Bluetooth memory is cleared.

If you do not want to clear the memory,

touch [Cancel].

Updating Bluetooth software

This function is used to update this product with the latest Bluetooth software. For details on Bluetooth software and updating, refer to our website. p The source is turned off and the

Bluetooth connection is disconnected before the process starts.

p This setting is available only when you

stop your vehicle in a safe place and apply the parking brake.

CAUTION

Never turn this product off and never disconnect the phone while the software is being updated.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Bluetooth” screen appears.

3 Touch [BT Software Update]. 4 Touch [Start].

The data transfer screen is displayed. p Follow the on-screen instructions to finish

updating the Bluetooth software.

Displaying the Bluetooth software version

If this product fails to operate properly, you may need to consult your dealer for repair. In such cases, you may be asked to specify the software version. Perform the following procedure to check the version on this unit.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Bluetooth” screen appears.

3 Touch [Bluetooth Version

Information].

The version of this product’s Bluetooth module appears.

Using hands-free phoning

CAUTION

For your safety, avoid talking on the phone as much as possible while driving. If your cellular phone features Bluetooth technology, this product can be connected to your cellular phone wirelessly. Using this hands-free function, you can operate this product to make or receive phone calls. This section describes how to set up a Bluetooth connection and how to operate a cellular phone featuring Bluetooth technology on this product.

For details about connectivity with the devices featuring Bluetooth wireless technology, refer to the information on our website.

Displaying the phone menu

Use the Phone icon if you wish to connect a cellular phone to this product for utilization.

For details, refer to Chapter 3.

p The Phone icon is displayed on the follow-

ing screens.

— Top menu screen — AV operation screen — On the App control side bar on the

AppRadio Mode and MirrorLink

screens

Touch the following key.

Displays the Phone menu screen.

p The “Phone Book” screen appears when

using this function for the first time. The

screen of the last-used function appears

from the next time.

■ Touch panel keys

6 7

1 2 3

4 5

1 Displays the preset dial screen. 2 Switches to the phone book list. 3 Switches to the missed, received and

dialed call lists.

4 Switches the mode to enter the phone

number directly.

5 Switches to the voice recognition func-

tion (for iPhone).

6 Displays the Setting menu screen. 7 Closes the screen. 8 Displays the alphabet search screen.

■ Reading the screen

1 32456

1 Menu title 2 Name of the connected cellular phone 3 Battery status of the cellular phone 4 Reception status of the cellular phone 5 Indicates that a Bluetooth telephone is

connected.

The device number of the connected

device is displayed.

6 List display area

Making a phone call

You can make a phone call in many different ways.

Chapter

English

Chapter

■ Direct dialing

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Dial” screen appears.

1 Dial pad 2 Deletes one digit. Touch and hold to

delete all digits.

1 2

3 Touch the number keys to enter the

phone number.

4 Touch the following key.

Makes a call.

5 Touch the following key.

Ends the call.

The call ends. p You may hear a noise when you hang up

the phone.

■ Calling a number in the phone

book

After finding the number you want to call in the phone book, you can select the entry and make the call. p The contacts on your phone will

normally be transferred to this

product automatically when the phone is connected.

If it is not, use your phone menu to trans-

fer the contacts.

The visibility of this product should be on

when you use the “Bluetooth” menu.

For details, refer to Switching visibility on

page 14.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Phone Book” screen appears.

3 Touch the desired name on the list.

The details screen of the phone book appears.

4 Touch the phone number you want

to dial.

The dial screen appears.

5 Dialing starts.

p To cancel the call, touch .

6 Touch the following key.

Ends the call.

The call ends.

Selecting a number by alphabet search mode

If a lot of numbers are registered in the phone book, you can search for the phone number by alphabet search mode.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Phone Book” screen appears.

3 Touch the Initial Search Bar to

display the alphabet search screen. 4 Touch the first letter of the entry

you are looking for.

The “Phone Book” entries starting with that letter (e.g. “Ben”, “Brian” and “Burt” when “B” is selected) will be displayed.

5 Touch the list to display the phone

number list of the selected entry.

The details screen of the phone book appears.

If several phone numbers are included in

an entry, select one by touching the list.

6 Touch the phone number you want

to dial.

The dial screen appears.

7 Dialing starts.

p To cancel the call, touch .

8 Touch the following key.

Ends the call.

The call ends.

■ Dialing from the history

The most recent calls made (dialed, received and missed) are stored in the call history list. You can browse the call history list and call numbers from it.

1 Press the HOME button to display

the Top menu screen. 2 Touch the following keys in the

following order.

The “History” screen appears.

p Depending on the type of cellular phone,

some calls may not be displayed in the

call history.

1 Type of call history

Received calls.

Dialed calls.

Missed calls.

3 Touch the desired entry on the list

to make a call.

The dial screen appears.

4 Dialing starts.

p To cancel the call, touch .

5 Touch the following key.

Ends the call.

The call ends.

■ Using the preset dial lists

You can dial a number from the preset dial list.

Registering a phone number

You can easily store up to six phone numbers per device as presets.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Phone Book” or “History” screen appears.

3 Touch the following key.

Registers the phone number to the “Preset Dial” list.

Dialling from the preset dial list

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Preset Dial” screen appears.

3 Touch the desired entry on the list

to make a call.

The dial screen appears.

4 Dialing starts.

p To cancel the call, touch .

5 Touch the following key.

Ends the call.

The call ends.

Deleting a phone number

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Preset Dial” screen appears.

3 Touch the following key.

Deletes the phone number.

Receiving a phone call

You can perform hands-free answering by using this product.

■ Answering an incoming call

This product informs you that it is receiving a call by displaying a message and producing a ring sound. p You can set the system to automatically

answer incoming calls. If this product is not set to automatically answer incoming calls, you will have to answer the calls manually.

For details, refer to Answering a call

automatically on page 17.

p The registered name appears if the phone

number of the received call is already registered in “Phone Book”.

1 Touch the following key.

Answers an incoming call.

Rejects an incoming call.

The rejected call is recorded in the missed call history list.

For details, refer to Dialing from the his-

tory on page 16.

2 Touch the following key.

Ends the call.

The call ends.

MinimiYing the dial conÆrmation screen

p The dial confirmation screen cannot be

minimized on the AV operation screen. p AV sources cannot be selected even if the

dial confirm screen is minimized while

talking on the phone.

1 Touch the following key.

The dial confirmation screen is minimized.

2 Touch the following key.

Displays the dial confirmation screen again.

Changing the phone settings

■ Answering a call automatically

This product automatically answers incoming calls to the connected cellular phone, so you can answer calls while driving without taking your hands off the steering wheel. When “Auto Answer” is set to “On”, an incoming call will be automatically answered in 5 seconds.

1 Press the HOME button to display

the Top menu screen. 2 Touch the following keys in the

following order.

The “Bluetooth” screen appears.

3 Touch [Auto Answer] repeatedly

until the desired setting appears.

Off (default):

Turns the automatic answering off.

On:

Turns the automatic answering on.

■ Switching the ring tone

You can select whether or not to use this product’s ring tone. If this function is set to on, the ring tone for this product will sound.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Bluetooth” screen appears.

3 Touch [Ring Tone] repeatedly until

the desired setting appears.

On (default):

Turns the ring tone on.

Off:

Turns the ring tone off.

■ Inverting names in the phone

book

When your device is connected to this product, the first and last names of your contacts may be registered to the phone book in reverse order. You can use this function to change the order back. (Inverting the names in the phone book)

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Bluetooth” screen appears.

3 Touch [Invert Name].

The confirmation screen appears.

Chapter

English

Chapter

4 Touch [Yes].

p If the inversion fails, “Invert Name Error”

appears. In such cases, try again from the beginning.

p Inverting the names of your contacts from

this product does not affect the data on your Bluetooth device.

■ Setting the private mode

During a conversation, you can switch to private mode (talk directly on your cellular phone).

Touch the following keys to turn

private mode on or off.

Talk directly on your mobile device

Hands-free phoning

■ Adjusting the other party’s lis-

tening volume

To maintain good sound quality, this product can adjust the other party’s listening volume. If the volume is not loud enough for the other party, use this function.

Touch the following key.

Switches between the three volume levels.

p This function can be performed even

while talking on the phone.

p Settings can be stored for each device.

Using the voice recognition function (for iPhone)

You can use the voice recognition function of iPhone. p When an iPhone running iOS 6.1 or

higher is used, Siri Eyes Free Mode is available with this product.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys to start

voice control.

The voice recognition function launches and the voice control screen appears. You can use the voice recognition function in the same way as using it on the iPhone. p You can also launch the voice recogni-

tion function by pressing and holding the HOME button.

Indicates that this product is on standby for your voice commands.

Cancels the voice recognition function.

Notes for hands-free phoning

General notes

Connection to all cellular phones featur-

ing Bluetooth wireless technology is not guaranteed.

The line-of-sight distance between this

product and your cellular phone must be 10 meters or less when sending and receiving voice and data via Bluetooth technology. However, the actual transmission distance may be shorter than the estimated distance, depending on the usage environment.

With some cellular phones, the ring

sound may not be output from the speakers.

If private mode is selected on the cel-

lular phone, hands-free phoning may be disabled.

Registration and connection

Cellular phone operations vary depending

on the type of cellular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions.

With cellular phones, phone book trans-

fer may not work even though your phone

is paired with this product. In that case,

disconnect your phone, and then perform

pairing again from your phone to this

product.

Making and receiving calls

You may hear a noise in the following

situations: — When you answer the phone using the

button on the phone. — When the person on the other end of the

line hangs up the phone.

If the person on the other end of the line

cannot hear the conversation due to

an echo, decrease the volume level for

hands-free phoning. This may reduce the

echo.

With some cellular phones, even if you

press the accept button on the cellular

phone when a call comes in, hands-free

phoning may not be performed.

The registered name appears if the phone

number of the received call is already

registered in the phone book. When one

phone number is registered under dif-

ferent names, only the phone number is

displayed.

If the phone number of the received

call is not registered in the phone book,

the phone number of the received call

appears.

The received call and the dialed number histories

You cannot make a call to the entry of an

unknown user (no phone number) in the

received call history.

If calls are made by operating your

cellular phone, no history data will be

recorded in this product.

Phone book transfers

If there are more than 800 phone book

entries on your cellular phone, not all

entries may download completely.

With some cellular phones, it may not be

possible to transfer all items in the phone

book at one time. In this case, transfer

items one by one from your cellular

phone.

Depending on the cellular phone, this

product may not display the phone

book correctly. (Some characters may be garbled, or the order of first and last names may be reversed.)

If the phone book in the cellular phone

contains image data, the phone book may not be transferred correctly. (Image data cannot be transferred from the cellular phone.)

Depending on the cellular phone, phone

book transfer may not be available.

iPod / iPhone or smartphone setup operation

When using an iPod / iPhone or a smartphone with this product, configure the settings of this product according to the device to be connected. This section described the settings required for each device.

The basic Çow of iPod / iPhone or smartphone setup

1 Select the method for connecting your

device.

For details, refer to Setting the device

connection method on page 18.

2 Connect your device to this product.

For details of the connections, refer to

Chapter 30.

3 If necessary, connect your device to this

product via Bluetooth connection.

For details of the Bluetooth connection,

refer to Chapter 3.

Setting the device connection method

If you want to use the application for iPhone or smartphone on this product, you must select the method for connecting your device. Settings are required according to the connected device.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “System” screen appears.

3 Touch [Input/Output settings]. 4 Touch [Smartphone Setup].

The “Smartphone Setup” screen appears.

5 Touch the following settings.

Device: Select the device to be

connected.

Connection: Select the connection

method.

p Configure the settings correctly accord-

ing to the device to be connected and the connection method to be used.

For details, refer to Information on the

connections and functions for each device on page 19.

p If you change the setting, the confirma-

tion screen appears.

Touch [OK]. The setting will change after the following

processes are automatically executed.

— The source is turned off. — AppRadio Mode and MirrorLink mode

are exited.

— The smartphone connection (USB and

Bluetooth) is disconnected.

To cancel, touch [Cancel].

iPod compatibility

This product supports only the following iPod models and iPod software versions. Others may not work correctly. Made for

iPhone 5c: iOS 7.0.3 iPhone 5s: iOS 7.0.3 iPhone 5: iOS 7.0.3 iPhone 4s: iOS 7.0.3 iPhone 4: iOS 7.0.3 iPhone 3GS: iOS 6.0.1 iPod touch (5th generation): iOS 6.0.1 iPod touch (4th generation): iOS 6.0.1 iPod touch (3rd generation): iOS 5.1.1 iPod touch (2nd generation): iOS 4.2.1

iPod classic 160GB (2009): Ver. 2.0.4 iPod classic 160GB (2008): Ver. 2.0.1 iPod classic 80GB: Ver. 1.1.2 iPod nano (7th generation) iPod nano (6th generation): Ver. 1.2 iPod nano (5th generation): Ver. 1.0.2 iPod nano (4th generation): Ver. 1.0.4 iPod nano (3rd generation): Ver. 1.1.3

p You can connect and control an iPod

compatible with this product by using separately sold connector cables.

p Operation methods may vary depending

on the iPod model and the software version of the iPod.

p Depending on the software version of the

iPod, it may not be compatible with this product.

For details about iPod compatibility with

this product, refer to the information on

our website. This manual applies to the following iPod models. iPod with 30-pin connector

iPhone 4s iPhone 4 iPhone 3GS iPod touch 4th generation iPod touch 3rd generation iPod touch 2nd generation iPod classic 160GB iPod classic 80GB iPod nano 6th generation iPod nano 5th generation iPod nano 4th generation iPod nano 3rd generation

iPod with Lightning connector

iPhone 5c iPhone 5s iPhone 5 iPod touch 5th generation iPod nano 7th generation

Android™ device compatibility

p Operation methods may vary depending

on the Android device and the software

version of the Android OS. p Depending on the version of the Android

OS, it may not be compatible with this

product.

p Compatibility with all Android devices is

not guaranteed. For details about Android device compatibility with this product, refer to the information on our website.

MirrorLink device compatibility

p This product is compatible with

MirrorLink version 1.0.

p Compatibility with all MirrorLink devices

is not guaranteed.

For details about MirrorLink device compatibility with this product, refer to the information on our website.

Information on the connections and functions for each device

The settings and cables required for connecting each device, and the available sources are as follows.

iPod / iPhone with a 30-pin connector

Required cable (sold separately)

Smartphone Setup

Bluetooth connection

Connection requirement —

Available source

Device iPhone/iPod iPhone/iPod iPhone/iPod Connection Wireless via BT USB USB

iPod (audio) — iPod (video) — aha Pandora AppRadio

Mode

iPod / iPhone with a Lightning connector

Required cable (sold separately)

Smartphone Setup

Device iPhone/iPod iPhone/iPod iPhone/iPod Connection Wireless via BT USB

Cable connection is not required.

Bluetooth connection is required for using aha or Pandora.

——

Cable connection is not required.

CD-IU201V CD-IU201S

——

Connect to USB port 1 for using aha or Pandora.

CD-IU52

Connect to USB port 1 for using

AppRadio Mode.

CD-IH202 CD-IU52 Lightning

Digital AV Adapter

Digital AV adapter

Chapter

English

Chapter

Bluetooth connection

Connection requirement — —

iPod (audio) — iPod (video)———

Available source

Remarks — —

(*1) Install the CarMediaPlayer app on your iPod or iPhone.

For details about the CarMediaPlayer, refer to the information on our website. Refer to the CarMediaPlayer manual for more information.

aha Pandora AppRadio

Mode

Bluetooth connection is required for using aha or Pandora.

——

Bluetooth connection is required for using aha or

Pandora.

Android, MirrorLink device

Required cable (sold separately)

Smartphone Setup

Bluetooth connection

Connection requirement —

Available source

Device Others Others Others Connection Wireless via BT HDMI USB

aha Pandora AppRadio

Mode MirrorLink ——

Cable connection is not required.

Bluetooth connection is required for using aha or Pandora.

—

CD-AH200 CD-MU200

Bluetooth connection is required.

Connect to USB port 2.

Bluetooth connection is required.

Connect to USB port 1 for using

AppRadio Mode.

—

iPod is not available. Please use the CarMediaPlayer to play music or videos in

AppRadio Mode. (*1)

Bluetooth connection is required for using aha or Pandora. Connect to USB port 2.

—

HD Radio™ reception

HD Radio stations

HD Radio stations offer high quality audio and data services. HD Radio stations are brought to you by your local FM or AM stations. HD Radio stations feature the following:

High quality audio FM multicasting Data service

AM band

Analog AM

Analog AM Digital AM

FM band

Analog FM

Analog FM Digital FM

Analog FM Digital FM-1ch

Digital FM-2ch

: Main channel : Sub channel

Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD.

Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams.

Digital FM-3ch

Adjacent to traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, original music as well as deep cuts into traditional genre.

iTunes® Tagging provides you the opportunity to discover a wide range of content and the means to “tag” that content for later review and purchase from the iTunes® Store.

Visual information related to content being played on your HD Radio receiver, such as Album Art, historical photographs, still art from live broadcasts, among other related content.

Using the touch panel keys

12 43

1 Displays the source list.

For details, refer to Selecting a front

source on the source list on page 12.

2 Selects a band.

For details, refer to Selecting a band on

page 21.

3 Displays the Time and date setting

screen.

For details, refer to Setting the time and

date on page 62.

4 Displays the Setting menu screen. 5 Recalls equalizer curves.

For details, refer to Using the equalizer on

page 56.

6 Switches the text display between the

main channel and sub channels.

For details, refer to Reading the screen on

page 21.

7 Displays the Phone menu screen.

For details, refer to Displaying the phone

menu on page 15.

8 Stores song information to an iPod.

For details, refer to Storing song information

to an iPod (iTunes Tagging) on page 62.

9 Performs manual tuning or seek tuning.

For details, refer to Manual tuning on

page 21.

For details, refer to Seek tuning on page 21.

a Displays the preset channels.

For details, refer to Selecting a preset

channel from the preset channel list on page 22.

b Recalls the preset channel stored to a key

from memory with a single touch of the key.

Stores the current broadcast frequency

to a key for later recall by continuing to touch the key.

For details, refer to Storing broadcast

frequencies on page 22.

Reading the screen

a 9 56

1 Band indicator Shows the tuned band: FM1, FM2, FM3 or

AM. 2 Detailed information Main channel — Call sign, program service or frequency Shows the call sign, the program service

or the frequency of the broadcast station

currently being received.

— Song title Shows the title of the current song (when

available). — Artist (performer) name Shows the artist (performer) name for the

song currently playing (when available). Multicast channels — Multicast channel number and song title Shows the numbers of multicast chan-

nels and the song titles. p “No Title” is displayed if there is no cor-

responding information. p The currently tuned multicast channel is

displayed at the top of the list.

3 Current time and date 4 Album artwork

Shows the artwork for the current song

(when available). p If the album artwork cannot be acquired,

the station logo is displayed. If the station

logo cannot be acquired either, a prein-

stalled image is displayed. 5 iTunes® tagging song status indicator Shows the status of the song information

stored in this product. p The icon is displayed on all operation

screens of AV sources.

Indicator Meaning

Appears when the song information tag is stored in this product.

Appears when the song

6 iTunes® tagging indicator Indicates songs that are capable of iTunes

tagging. p The icon is displayed on all operation

screens of AV sources.

information tag is being transferred to an iPod.

Indicator Meaning

Appears when this product receives an iTunes song tag that can be stored and then downloaded to an iPod for later purchase. Flashes when this product is storing song tag information.

7 Signal type indicator Shows the type of signal currently being

received. If a digital broadcast is being received, appears. Otherwise,

8 HD Radio indicator Shows that HD Radio station information

9 Multicasting indicator Shows the number of multicast channels

a Frequency indicator b Preset number indicator

Shows the selected preset item.

appears.

is being received.

in the current frequency.

Starting procedure

1 Display the AV source selection

screen.

For details of the operations, refer to

Displaying the AV operation screen on page 11.

2 Touch [HD Radio] on the AV source

selection screen.

The “HD Radio” screen appears.

3 Use the touch panel keys on the

screen to control the radio.

For details, refer to Using the touch panel

keys on page 20.

Selecting a band

Touch the following key repeatedly

until the desired band appears.

Switches between the following FM bands: FM1, FM2 and FM3.

Switches to AM band.

p This function is convenient for preparing

different preset lists for each band.

Chapter

Manual tuning

Touch the following keys to tune

manually.

Moves down one step at a time.

Moves up one step at a time.

p This function is convenient for preparing

different preset lists for each band.

Seek tuning

Touch and hold one of the follow-

ing keys for about one second and then release.

Scans frequencies until it finds a broadcast strong enough for good reception. You can cancel seek tuning by touching either key briefly. If you keep holding either key, you can skip broadcasting frequencies. Seek tuning will start when you release the key.

p When an analog station is being received,

only analog broadcasts can be tuned up or down.

If a digital broadcast is not being received

yet, tuning up or down seeks the next or previous analog station.

Analog FM

Digital FM-1ch

Digital FM-2ch

Digital FM-3ch

Analog FM

English

Chapter

Selecting a preset channel from the preset channel list

Once you have stored broadcast channels, you can easily recall preset channels from memory with a single touch of a key.

For details, refer to Storing broadcast

frequencies on page 22.

1 Touch the preset channel list dis-

play key.

1 Preset channel list display key

2 Touch the item on the list (“1” to

“6”) to switch to a channel registered as a preset channel.

p If you touch the preset channel list

display key while the preset channel list is displayed, the list disappears and the preset tuning keys are displayed.

Storing broadcast frequencies

With a touch of any of the preset tuning keys (“1” to “6”), you can easily store up to six broadcast channels for later recall (also with the touch of a key).

1 Select a frequency that you want to

store in memory.

2 Touch and hold a preset tuning key

[1] to [6].

The selected radio station is stored in memory. The next time you touch the same preset tuning key “1” to “6”, the service component is recalled from memory. p Up to 18 FM stations, six for each of the

three FM bands, as well as six AM stations, can be stored in memory.

Storing the strongest broadcast frequencies

The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset tuning keys “1” to “6” and, once stored there, you can tune into them with the touch of a key. p Storing broadcast frequencies with BSM

may replace broadcast frequencies you have already saved.

p Previously stored broadcast frequen-

cies may remain stored if the number of strong broadcast frequencies stored has not reached the limit.

1 Touch the preset channel list dis-

play key.

The preset channel list appears.

2 Touch [BSM] to begin a search.

A message appears. While the message is displayed, the six strongest broadcast frequencies will be stored under the preset tuning keys “1” to “6” in the order of their signal strength. When this is complete, the message will disappear.

If you touch [Cancel], the storage pro-

cess is canceled.

Tuning into strong frequencies

p This setting is available only when “HD

Radio” is selected as the source.

Local seek tuning allows you to only tune into those radio stations with sufficiently strong signals for good reception.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “System” screen appears.

3 Touch [AV Source Settings]. 4 Touch [Radio settings].

5 Touch [Local].

The pop-up menu appears.

6 Touch the item you want to set.

Off (default):

Turns the seek tuning setting off.

Level1:

Sets the level of sensitivity for FM to level 1.

Level2:

Sets the level of sensitivity for FM to level 2.

Level3:

Sets the level of sensitivity for FM to level 3.

Level4:

Sets the level of sensitivity for FM to level 4. AM

Off (default):

Turns the seek tuning setting off.

Level1:

Sets the level of sensitivity for AM to level 1.

Level2:

Sets the level of sensitivity for AM to level 2. p The FM “Level4” (AM “Level2”) setting

allows reception of only stations with the strongest signals, while lower settings allow reception of those with weaker signals.

Switching the seek mode

You can select the method of seek tuning.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “System” screen appears.

3 Touch [AV Source Settings]. 4 Touch [Radio settings]. 5 Touch [Seek] repeatedly until the

desired setting appears.

Seek All (default):

Seeks stations from both analog and

digital broadcasting.

Seek HD:

Only seeks stations from digital

broadcasting.

Switching the reception mode

If reception of a digital broadcast becomes weak, the tuner automatically switches to the analog broadcast of the same frequency level by default. If you want to avoid frequent automatic switching, change this setting to “Off”.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “System” screen appears.

3 Touch [AV Source Settings]. 4 Touch [Radio settings]. 5 Touch [Blending] repeatedly until

the desired setting appears.

On (default):

Switches to the analog broadcast of the

same frequency automatically.

Off:

Does not switch to the analog broadcast

of the same frequency automatically.

Storing song information to an iPod (iTunes Tagging)

p For details, refer to Storing song information

to an iPod (iTunes Tagging) on page 62.

Operating with the hardware buttons

Press the TRK button

You can move the preset channels up or down.

Press and hold the TRK button

You can perform seek tuning.

Playing a disc

You can play a normal music CD, Video-CD or DVD-Video using the built-in drive of this product. This section describes these operations.

CAUTION

For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, you must stop in a safe place and apply the parking brake.

Using the touch panel keys (for audio)

Example: CD

Playback screen (page 1)

132

b a 898

Playback screen (page 2)

Using the touch panel keys (for video)

Example: DVD

7cde

Playback screen (page 1)

132

m l

8k j8i

Playback screen (page 2)

4 5

1 Displays the source list.

For details, refer to Selecting a front

source on the source list on page 12. 2 Displays the Time and date setting

screen.

For details, refer to Setting the time and

date on page 62.

3 Displays the Setting menu screen. 4 Recalls equalizer curves.

For details, refer to Using the equalizer on

page 56. 5 Selects a track from the list.

For details, refer to Selecting files from

the file name list on page 24. 6 Displays the Phone menu screen.

For details, refer to Displaying the phone

menu on page 15. 7 Switches to the next or previous page of

touch panel keys.

8 Skips files forward or backward. 9 Changes the playback point by dragging

the key.

For details, refer to Operating the time bar

on page 12. a Switches the media file type.

For details, refer to Switching the media

file type on page 24.

b Switches between playback and pause. c Uses “Sound Retriever” function.

For details, refer to Setting the “Sound

Retriever” function on page 63.

d Plays files in random order.

For details, refer to Playing tracks in

random order on page 24.

e Sets a repeat play range.

For details, refer to Setting a repeat play

range on page 24.

f Searches for the part you want to play.

For details, refer to Searching for the part

you want to play on page 24. g Hides the touch panel keys. Touching this area hides the touch panel

keys. p Touch anywhere on the LCD screen to

display the touch panel keys again. h Displays the DVD menu.

For details, refer to Operating the DVD

menu on page 25.

nopeqr

i Switches the subtitle language.

For details, refer to Switching the subtitle

language on page 25. j Switches the audio language.

For details, refer to Switching the audio

language on page 25.

k Stops playback. l Changes the wide screen mode.

For details, refer to Changing the wide

screen mode on page 63. m Moves ahead one frame (frame-by-frame

playback) or slows down playback speed

(slow-motion playback).

For details, refer to Frame-by-frame play-

back on page 25.

For details, refer to Slow motion playback

on page 25. n Performs an operation (such as resum-

ing) that is stored on the disc.

For details, refer to Returning to a speci-

fied scene on page 25. o Resumes playback (Bookmark).

For details, refer to Resuming playback

(Bookmark) on page 25. p Displays the DVD menu keypad.

For details, refer to Operating the DVD

menu using touch panel keys on page 25. q Changes the viewing angle (Multi-angle).

For details, refer to Switching the multi-

angle DVD display on page 25.

r Selects the audio output.

For details, refer to Selecting the audio

output on page 26.

Reading the screen (for audio)

Example: CD

Reading the screen (for video)

Example: DVD

9 8

Example: Video CD

1 Current time and date 2 Playback condition indicator

Indicates the current playback condition.

Chapter

English

5 6 7

Chapter

Playing tracks in random order

Indicator Meaning

Does not play tracks in random order.

Plays all tracks in the current disc in random order.

Setting a repeat play range

Indicator Meaning

Repeats just the current track.

Repeats the current disc.

3 Play time indicator Shows the elapsed playing time within

the current file. 4 Track number indicator Shows the number of the track currently

playing (when available). 5 Audio channel indicator Shows the current audio channel type,

such as “Mch” (Multi-channel). 6 Digital sound format indicator Shows which digital sound format (sur-

round sound format) has been selected. 7 Sampling frequency indicator Shows the sampling frequency currently

playing. 8 Title number indicator Shows the title number currently playing. 9 Chapter number indicator Shows the chapter number currently

playing. a PBC ON indicator Indicates that a disc with PBC On is

being played.

Starting procedure

1 Display the AV source selection

screen.

For details of the operations, refer to

Displaying the AV operation screen on

page 11.

2 Insert the disc you want to play

into the disc-loading slot.

The source changes and then playback will start.

For details, refer to Inserting and ejecting

a disc on page 9.

p If the disc is already set, touch [Disc] on

the source list or on the AV source selection screen.

For details, refer to Selecting a front

source on the source list on page 12.

For details, refer to Selecting a front

source on the AV source selection screen on page 12.

3 Use the touch panel keys on the

screen to control the disc.

For details, refer to Using the touch panel

keys (for audio) on page 23.

For details, refer to Using the touch panel

keys (for video) on page 23.

Selecting Æles from the Æle name list

You can select tracks to play back using the track title list which is a list of the tracks recorded on a disc.

1 Touch the following key.

Displays a list of the tracks recorded on the disc.

2 Touch a track on the list to play

back.

Playing tracks in random order

All tracks on the disc can be played at random by only touching a single key.

Touch the following key repeatedly

until the desired setting appears.

Turns random play on or off.

(default):

Does not play tracks in random order.

Plays all tracks in the current repeat play

range in random order.

p If you turn random play on when the

repeat play range is set to the current track, the repeat play range changes to the whole of the current disc automatically.

Setting a repeat play range

The repeat play range can be changed by only touching a single key.

Touch the following key repeatedly

until the desired setting appears.

Changes the repeat play range.

Audio

(default):

Repeats the current disc.

: Repeats just the current track. p If you turn random play on when the

repeat play range is set to the whole of the current disc, the repeat play range changes to the current track automatically.

p If you turn random play on when the

repeat play range is set to the current track, the repeat play range changes to the whole of the current disc automatically.

p When random play is turned on, you can

change the repeat play range from the whole of the current disc to the current track.

Video

(default): Repeats all files.

: Repeats just the current chapter.

: Repeats just the current title.

Switching the media Æle type

When playing a digital media containing a mixture of various media file types you can switch between media file types to play.

1 Touch the following key.

Displays the pop-up menu for selecting a media file type to play on the disc.

2 Touch the item you want to set.

Music:

Switches the media file type to music

(compressed audio).

Video:

Switches the media file type to video.

CD-DA:

Switches the media file type to CD (audio

data (CD-DA)).

Searching for the part you want to play

You can use the search function to find the part you want to play. p For DVD-Videos, you can select Title

(title), Chapter (chapter) or 10Key (numeric keypad).

p For Video-CDs, you can select Tr a c k

(track) or 10Key (numeric keypad).

10Key (numeric keypad) is available

for Video-CDs featuring PBC (playback control) only.

p Chapter search and time search are not

available when disc playback has been stopped.

1 Touch the following key.

Displays the screen for direct number search.

2 Touch [Title] (title), [Chapter]

(chapter) or [10Key] (numeric keypad).

3 Touch [0] to [9] to input the desired

number.

p To cancel an input number, touch [Clear].

To cancel the input numbers, touch and hold [Clear].

4 Touch the following key.

Registers the numbers and starts playback.

Operating the DVD menu

You can operate the DVD menu by touching the menu item on the screen directly. p This function may not work properly with

some DVD disc content. In that case, use touch panel keys to operate the DVD menu.

1 Touch the screen to display the

touch panel keys.

2 Touch the following key.

Displays the touch panel keys to operate the DVD menu.

3 Touch the desired menu item.

Switching the subtitle language

You can switch the subtitle language while a disc is playing when the disc has multilingual data (multi-subtitle).

Touch the following key repeatedly

until the desired setting appears.

Changes the subtitle language. You can also switch between subtitle languages using the “DVD/DivX Setup” menu.

For details, refer to

Setting the top-priority languages on page 59.

Switching the audio language

You can switch the audio language while a disc is playing when the disc has multilingual data (multi-audio).

Touch the following key repeatedly

until the desired setting appears.

Changes the audio language. You can also switch between audio languages using the “DVD/DivX Setup” menu.

For details, refer to

Setting the top-priority languages on page 59.

Frame-by-frame playback

This lets you move ahead one frame at a time during pause.

Touch [ ] during pause.

Each time you touch [ ], you move ahead one frame.

p To return to normal playback, touch [ / ]. p With some discs, images may be unclear

during frame-by-frame playback.

Slow motion playback

This lets you slow down the playback speed.

1 Touch and hold [ ] until an arrow

icon is displayed during playback.

The arrow icon is displayed, and forward slow motion playback begins. p To return to normal playback, touch [ / ].

2 Touch [ ] to adjust playback

speed during slow motion playback.

Each time you touch [ ] it changes the speed in four steps in the following order: 1/16 1/8 1/4 1/2 p There is no sound during slow motion

playback.

p With some discs, images may be unclear

during slow motion playback.

p Reversed slow motion playback is not

possible.

Returning to a speciÆed scene

When using a disc that has a point recorded that indicates where to return to, the disc returns to the specified point and begins playback from there.

This function cannot be used if a specified scene has not been preprogramed on the disc. p This function is available for DVD-Video

and Video-CDs featuring PBC (playback control) only.

Touch the following key.

Returns to the specified point and begins playback from there.

p The specified point differs depending on

the disc.

Resuming playback (Bookmark)

The Bookmark function lets you resume playback from a selected scene the next time the disc is loaded.

Touch the following key.

Bookmarks one point for each of up to five discs.

p If you try to memorize another point for

the same disc, the older bookmark will be overwritten by the newer one.

p To clear the bookmark on a disc, touch

and hold this key.

p The oldest bookmark is replaced by the

new one.

Operating the DVD menu using touch panel keys

If items on the DVD menu appear, the touch panel keys may overlay them. If so, select an item using those touch panel keys.

1 Touch the following keys to select

the desired menu item.

Selects the left menu item.

Selects the right menu item.

Selects the upper menu item.

Selects the lower menu item.

p If the touch panel keys for DVD menu

selection disappear, touch anywhere on the screen, and then touch panel keys are displayed again.

. The touch

2 Touch the following key.

Starts playback from the selected menu item.

p The way to display the menu differs

depending on the disc.

If you touch , the touch panel keys

disappear and the icon is displayed. You can select a menu item by touching it.

Switching the multi-angle DVD display

With DVDs featuring multi-angle recordings (scenes shot from multiple angles), you can switch among viewing angles during playback.

Touch the following key repeatedly

until the desired setting appears.

Switches between viewing angles. During the playback of a scene shot from multiple angles, the angle icon is displayed. Turn the angle icon display on or off using the “DVD/ DivX Setup” menu.

For details, refer to

Setting the angle icon display on page 60.

Chapter

English

Chapter

Selecting the audio output

When playing DVDs recorded with LPCM audio, you can switch the audio output.

Touch the following key repeatedly

until the desired setting appears.

Changes the audio output setting.

L+R: Left and right Left: Left Right: Right Mix: Mixing left and right

p This function is not available when disc

playback has been stopped.

p The appearance of this key changes

according to the current setting.

Operating with the hardware buttons

Press the TRK button

You can skip tracks or chapters forward or backward.

Press and hold the TRK button

You can perform fast reverse or fast forward.

Playing compressed audio Æles

You can play compressed audio files stored in a disc or an external device (USB, SD) using the built-in drive of this product. This section describes how.

For details, refer to Media compatibility

chart on page 80.

Using the touch panel keys

Example: SD

Playback screen (page 1)

1243

d c aba

Playback screen (page 2)

1 Displays the source list.

For details, refer to Selecting a front

source on the source list on page 12.

2 Displays the MIXTRAX screen.

For details, refer to Chapter 21.

3 Displays the Time and date setting

screen.

For details, refer to Setting the time and

date on page 62.

4 Displays the Setting menu screen. 5 Recalls equalizer curves.

For details, refer to Using the equalizer on

page 56.

6 Selects a file from the list.

For details, refer to Selecting files from

the file name list on page 27.

Displays a list related to the song cur-

rently playing (link search).

For details, refer to Selecting a file from

the list related to the song currently playing (link search) on page 27.

7 Switches the text display between tag

information and file/folder information.

For details, refer to Reading the screen on

page 26.

9efgh

For details, refer to Switching the browse

mode on page 27.

8 Displays the Phone menu screen.

For details, refer to Displaying the phone

menu on page 15.

9 Switches to the next or previous page of

touch panel keys.

a Skips files forward or backward.

b Changes the playback point by dragging

the key.

For details, refer to Operating the time bar

on page 12.

c Switches the media file type.

For details, refer to Switching the media

file type on page 28.

d Switches between playback and pause. e Uses “Sound Retriever” function.

For details, refer to Setting the “Sound

Retriever” function on page 63.

f Plays files in random order.

For details, refer to Playing files in ran-

dom order on page 27.

g Sets a repeat play range.

For details, refer to Setting a repeat play

range on page 28.

h Selects the previous folder or the next

folder.

Reading the screen

Example: SD

1 Current file information Music Browse mode — : Song title/ : File name Shows the title of the song currently play-

ing (when available). If the title of a song

is not available, the file name appears. — : Artist name Shows the artist name for the song

currently playing (when available). “No

Name” is displayed if there is no corresponding information.

—

: Album title/ : Folder name

Shows the title of the album of the cur-

rent file (when available). If the title of the album is not available, the folder name appears.

—

: Genre

Shows the genre of the current file (when

available). “No Genre” is displayed if there is no corresponding information.

p Nothing is displayed if the song currently

playing is in a format which does not sup-

port these functions. Folder Browse mode —

: File name

Shows the name of the file currently

playing. — : Folder name Shows the name of the folder containing

the file currently playing.

2 Current time and date 3 Album artwork

Album art of the current song is displayed

if it is available. 4 Playback condition indicator Indicates the current playback condition.

Playing files in random order

Indicator Meaning

Does not play files in random

Setting a repeat play range (for Disc)

Indicator Meaning

Setting a repeat play range (for Music Browse mode)

order.

Plays all files within the repeat range in random order.

Repeats just the current file.

Repeats just the current folder.

Repeats all compressed audio files.

Indicator Meaning

Repeats just the current file.

Repeats all compressed audio files.

Setting a repeat play range (for Folder Browse mode)

Indicator Meaning

Repeats just the current file.

Repeats just the current folder.

Repeats all compressed audio files.

5 Play time indicator Shows the elapsed playing time within

the current file.

Starting procedure (for Disc)

1 Display the AV source selection

screen.

For details of the operations, refer to

Displaying the AV operation screen on page 11.

2 Insert the disc you want to play

into the disc-loading slot.

The source changes and then playback will start.

For details, refer to Inserting and ejecting

a disc on page 9.

p If the disc is already set, touch [Disc] on

the source list or on the AV source selection screen.

For details, refer to Selecting a front

source on the source list on page 12.

For details, refer to Selecting a front

source on the AV source selection screen on page 12.

3 Use the touch panel keys on the

screen to control the disc.

For details, refer to Using the touch panel

keys on page 26.

Starting procedure (for USB/ SD)

1 Display the AV source selection

screen.

For details of the operations, refer to

Displaying the AV operation screen on page 11.

2 Insert the SD memory card into the

SD card slot or plug the USB storage device into the USB connector.

For details, refer to Plugging in a USB

storage device on page 10.

For details, refer to Inserting and ejecting

an SD memory card on page 10.

3 Touch [USB] or [SD] on the AV

source selection screen.

The image is displayed on the screen.

4 Use the touch panel keys on the

screen to control the external storage device (USB, SD).

For details, refer to Using the touch panel

keys on page 26.

p Playback is performed in order of folder

numbers. Folders are skipped if they contain no playable files. If there are no playable files in folder 01 (root folder), playback starts from folder 02.

Switching the browse mode

This product supports two types of browse modes: Folder Browse mode and Music Browse mode. p The browse modes are available only for

the external storage device (USB, SD). Music Browse mode Displays a song title, artist name, album name and genre in the current file information display area on the AV operation screen. Select when you want to play music files narrowed down by a category of song title, artist name, album name or genre. If connecting an external device (USB, SD), this product accesses the database of music files with tag information and switches to the Music Browse mode automatically. Folder Browse mode

Displays a folder name and file name in the current file information display area on the AV operation screen. Select when you want to search for music files in the list screen or folders on the list screen. p You can switch between the browse

modes for file search by touching the tabs on the list screen.

Touch the following key repeatedly

until the desired setting appears.

Switches the display between Music Browse mode and Folder Browse mode.

Selecting Æles from the Æle name list

You can find files or folders to play back using the file name or folder name list which is a list of the files or folders stored on a disc or in the external storage device (USB, SD).

1 Touch the following key.

Displays the list of the files or folders stored on a disc or in the external storage device (USB, SD).

2 Touch a file on the list to play back.

p Files are played back in file number order. p Touching a folder on the list shows its

contents. You can play a file on the list by touching it.

Selecting a Æle from the list related to the song currently playing (link search)

You can select files to play back using the file list which is a list of the files recorded in the external storage device (USB, SD). p This function is available for the external

storage device (USB, SD) only.

1 Display the Music Browse mode.

For details, refer to Switching the browse

mode on page 27.

2 Touch the following key.

Displays the list of the files or folders stored in the external storage device (USB, SD).

3 Touch the desired category to

display the file list.

The list screen appears.

4 Touch the item that you want to

refine.

Refine the item until the desired song title or file name is displayed on the list. p Touching [All] on the list includes all

options in the current list. For example, if you touch [All] after touching [Artists], you can proceed to the next screen with all artists in the list selected.

p After you select “Artists”, “Albums”

or “Genres”, go on to touch one of the lists to start playing the first song in the selected list and display the next options.

5 Touch the desired song title or file

name to play back.

Playing Æles in random order

All files on the disc or in the external storage device (USB, SD) can be played at random by only touching a single key.

Touch the following key repeatedly

until the desired setting appears.

Turns random play on or off.

(default):

Does not play files in random order.

Plays all audio files in the current repeat

play range in random order.

p If you turn random play on when the

repeat play range is set to the current file, the repeat play range changes to the whole of the current disc or external storage device (USB, SD) automatically.

Chapter

English

Chapter

Setting a repeat play range

The repeat play range can be changed by only touching a single key.

Touch the following key repeatedly

until the desired setting appears.

Changes the repeat play range.

Music Browse mode

(default):

Repeats all files.

: Repeats just the current file. Folder Browse mode

(default): Repeats all files.

: Repeats the current folder.

: Repeats just the current file.

Switching the media Æle type

When playing a digital media containing a mixture of various media file types you can switch between media file types to play.

1 Touch the following key.

Displays the pop-up menu for selecting a media file type to play on the disc or in the external storage device (USB, SD).

2 Touch the item you want to set.

Music: Switches the media file type to music

(compressed audio).

Video: Switches the media file type to video.

CD-DA: Switches the media file type to CD (audio

data (CD-DA)).

Photo: Switches the media file type to still image

(JPEG data).

Operating with the hardware buttons

Press the TRK button

You can skip files forward or backward.

Press and hold the TRK button

You can perform fast reverse or fast forward.

Playing compressed video Æles

You can play compressed video files stored on a disc or in an external device (USB, SD) using the built-in drive of this product. This section describes how.

For details, refer to Media compatibility

chart on page 80.

CAUTION

For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, you must stop in a safe place and apply the parking brake.

Using the touch panel keys

Example: Disc

132

h g f

a bda

1 Displays the source list.

For details, refer to Selecting a front

source on the source list on page 12.

2 Displays the Time and date setting

screen.

For details, refer to Setting the time and

date on page 62.

3 Displays the Setting menu screen. 4 Recalls equalizer curves.

For details, refer to Using the equalizer on

page 56.

5 Selects a file from the list.

For details, refer to Selecting files from

the file name list on page 29. 6 Hides the touch panel keys. Touching this area hides the touch panel

keys. p Touch anywhere on the LCD screen to

display the touch panel keys again. 7 Sets a repeat play range.

For details, refer to Setting a repeat play

range on page 29. 8 Switches the subtitle language. With DivX featuring multi-subtitle record-

ings, you can switch between subtitle

languages during playback. 9 Displays the Phone menu screen.

For details, refer to Displaying the phone

menu on page 15.

a Skips files forward or backward. b Switches the audio language.

With DivX files that provide audio play-

back in different languages and different

audio systems (Dolby Digital, DTS, etc.),

you can switch between languages or

audio systems during playback. c Changes the playback point by dragging

the key.

For details, refer to Operating the time bar

on page 12. d Moves ahead one frame (frame-by-frame

playback) or slows down playback speed

(slow-motion playback).

For details, refer to Frame-by-frame play-

back on page 29.

For details, refer to Slow motion playback

on page 29.

e Switches the media file type.

For details, refer to Switching the media

file type on page 29.

f Switches between playback and pause. g Changes the wide screen mode.

For details, refer to Changing the wide

screen mode on page 63. h Stops playback.

Reading the screen

Example: Disc

1 Current time and date 2 Play time indicator

Shows the elapsed playing time within

the current file. 3 Current file information — : File name Shows the name of the file currently

playing. — : Folder name Shows the name of the folder containing

the file currently playing.

Starting procedure (for Disc)

1 Display the AV source selection

screen.

For details of the operations, refer to

Displaying the AV operation screen on

page 11.

2 Insert the disc you want to play

into the disc-loading slot.

The source changes and then playback will start.

For details, refer to Inserting and ejecting

a disc on page 9. p If the disc is already set, touch [Disc] on

the source list or on the AV source selec-

tion screen.

For details, refer to Selecting a front

source on the source list on page 12.

For details, refer to Selecting a front

source on the AV source selection screen

on page 12.

3 Use the touch panel keys on the

screen to control the disc.

For details, refer to Using the touch panel

keys on page 28.

Starting procedure (for USB/ SD)

1 Display the AV source selection

screen.

For details of the operations, refer to

Displaying the AV operation screen on page 11.

2 Insert the SD memory card into the

SD card slot or plug the USB storage device into the USB connector.

For details, refer to Plugging in a USB

storage device on page 10.

For details, refer to Inserting and ejecting

an SD memory card on page 10.

3 Touch [USB] or [SD] on the AV

source selection screen.

The image is displayed on the screen.

4 Use the touch panel keys on the

screen to control the external storage device (USB, SD).

For details, refer to Using the touch panel

keys on page 28.

p Playback is performed in order of folder

numbers. Folders are skipped if they contain no playable files. If there are no playable files in folder 01 (root folder), playback starts from folder 02.

Selecting Æles from the Æle name list

You can select files to view using the file name list which is a list of the files stored on a disc or in the external storage device (USB, SD).

1 Touch the following key.

Displays the list of the files or folders stored on a disc or in the external storage device (USB, SD).

2 Touch a file on the list to play back.

p Files are played back in file number order

and folders are skipped if they contain no files. (If folder 01 (root folder) contains no

files, playback commences with folder

02.)

p Touching a folder on the list shows its

contents. You can play a file on the list by touching it.

Touch the playback sign of the thumbnail

to preview the file.

Setting a repeat play range

The repeat play range can be changed by only touching a single key.

Touch the following key repeatedly

until the desired setting appears.

Changes the repeat play range.

or (default):

Repeats all files.

Repeats just the current folder.

Repeats just the current file.

Frame-by-frame playback

This lets you move ahead one frame at a time during pause.

Touch [ ] during pause.

Each time you touch [ ], you move ahead one frame.

p To return to normal playback, touch [ / ]. p With some discs and external storage

devices (USB, SD), images may be unclear during frame-by-frame playback.

Slow motion playback

This lets you slow down the playback speed.

1 Touch and hold [ ] until an arrow

icon is displayed during playback.

The arrow icon is displayed, and forward slow motion playback begins. p To return to normal playback, touch [ / ].

2 Touch [ ] to adjust playback

speed during slow motion playback.

p There is no sound during slow motion

playback.

p With some discs and external storage

devices (USB, SD), images may be unclear during slow motion playback.

p Reversed slow motion playback is not

possible.

Switching the media Æle type

When playing a digital media containing a mixture of various media file types you can switch between media file types to play.

1 Touch the following key.

Displays the pop-up menu for selecting a media file type to play on the disc or in the external storage device (USB, SD).

2 Touch the item you want to set.

Music:

Switches the media file type to music

(compressed audio).

Video:

Switches the media file type to video.

Photo:

Switches the media file type to still image

(JPEG data).

CD-DA:

Switches the media file type to CD (audio

data (CD-DA)).

Operating with the hardware buttons

Press the TRK button

You can skip files forward or backward.

Press and hold the TRK button

You can perform fast reverse or fast forward.

Playing compressed still image Æles

You can view still images stored in an external device (USB, SD) using the built-in drive of this product. This section describes how.

For details, refer to Media compatibility

chart on page 80.

Using the touch panel keys

132

f e

9 9

1 Displays the source list.

For details, refer to Selecting a front

source on the source list on page 12. 2 Displays the Time and date setting

screen.

For details, refer to Setting the time and

date on page 62.

3 Displays the Setting menu screen. 4 Recalls equalizer curves.

For details, refer to Using the equalizer on

page 56. 5 Selects a file from the list.

For details, refer to Selecting files from

the file name list on page 30. 6 Hides the touch panel keys. Touching this area hides the touch panel

keys. p Touch anywhere on the LCD screen to

display the touch panel keys again. 7 Plays files in random order.

For details, refer to Playing files in ran-

dom order on page 30. 8 Displays the Phone menu screen.

For details, refer to Displaying the phone

menu on page 15.

9 Skips files forward or backward. a Sets a repeat play range.

For details, refer to Setting a repeat play

range on page 30. b Rotates the displayed picture 90°

clockwise. c Selects the previous folder or the next

folder. d Switches the media file type.

For details, refer to Switching the media

file type on page 30. e Switches between playback and pause.

abcd

Chapter

English

4 5 6 7

Chapter

f Changes the wide screen mode.

For details, refer to Changing the wide

screen mode on page 63.

Reading the screen

1 Current time and date 2 Current file information

— : File name Shows the name of the file currently

playing. — : Folder name Shows the name of the folder containing

the file currently playing.

Starting procedure

1 Display the AV source selection

screen.

For details of the operations, refer to

Displaying the AV operation screen on

page 11.

2 Insert the SD memory card into the

SD card slot or plug the USB stor-

age device into the USB connector.

For details, refer to Plugging in a USB

storage device on page 10.

For details, refer to Inserting and ejecting

an SD memory card on page 10. p Playback is performed in order of folder

numbers. Folders are skipped if they

contain no playable files. If there are no

playable files in folder 01 (root folder),

playback starts from folder 02.

3 Touch [USB] or [SD] on the AV

source selection screen.

The image is displayed on the screen.

4 Use the touch panel keys on the

screen to control the external storage device (USB, SD).

For details, refer to Using the touch panel

keys on page 29.

Selecting Æles from the Æle name list

You can select files to view using the file name list which is a list of the files stored in the external storage device (USB, SD).

1 Touch the following key.

Displays the list of the files stored in the external storage device (USB, SD).

2 Touch a file on the list to play back.

p Files are played back in file number order

and folders are skipped if they contain no files. (If folder 01 (root folder) contains no files, playback commences with folder

02.)

p Touching a folder on the list shows its

contents. You can play a file on the list by touching it.

Playing Æles in random order

All files in the external storage device (USB, SD) can be played at random by only touching a single key.

Touch the following key repeatedly

until the desired setting appears.

Turns random play on or off.

(default):

Does not play files in random order.

Plays all files in the current repeat play

range in random order.

p If you turn random play on when the

repeat play range is set to the current file, the repeat play range changes to the whole of the current external storage device (USB, SD) automatically.

Setting a repeat play range

The repeat play range can be changed by only touching a single key.

Touch the following key repeatedly

until the desired setting appears.

Changes the repeat play range.

(default):

Repeats all files.

Repeats the current folder.

Switching the media Æle type

When playing a digital media containing a mixture of various media file types you can switch between media file types to play.

1 Touch the following key.

Displays the pop-up menu for selecting a media file type to play in the external storage device (USB, SD).

2 Touch the item you want to set.

Music:

Switches the media file type to music

(compressed audio).

Video:

Switches the media file type to video.

Photo:

Switches the media file type to still image

(JPEG data).

Setting the slideshow interval

JPEG files can be viewed as a slideshow on this product. In this setting, the interval between each image can be set. p This setting is available during playback

of the JPEG files.

1 Press the HOME button to display

the Top menu screen.

2 Touch the following keys in the

following order.

The “Video Setup” screen appears.

3 Touch [Time Per Photo Slide].

The pop-up menu appears.

4 Touch the item you want to set.

10sec (default):

JPEG images switch at intervals of 10

seconds.

5sec:

JPEG images switch at intervals of 5

seconds.

15sec:

JPEG images switch at intervals of 15

seconds.

Manual:

JPEG images can be switched manually.

Operating with the hardware buttons

Press the TRK button

You can skip files forward or backward.

Press and hold the TRK button

You can search 10 JPEG files at a time. p If the number of files in the folder (from

the file currently being played to the first or last file) is fewer than 10, the first or last file in the folder is automatically played.

p If the file currently being played is the first

or last file in the folder, the search is not performed.

Using an iPod

For iPod with a 30-pin connector users p Depending on your iPod, there may not

be any output unless you use a USB interface cable for iPod / iPhone (CD-IU201S/ CD-IU201V) (sold separately). Be sure to use a USB interface cable for iPod / iPhone (CD-IU201S/CD-IU201V) (sold separately) to connect your iPod.

+ 246 hidden pages