Pilz PSENslock Product Flyer
PSENslock safety gate systems –
now with 1000 N of magnetic force
Strict safety regulations require health and safety measures to
be safe from manipulation and defeat.
The new PSENslock non-contact safety gate systems offer
a safe alternative to existing mechanical technology. PSENslock
combines safety door monitoring with an electrosensitive
magnetic interlock of 500 N (PSEN sl-0.5p) or 1000 N
(PSEN sl-1.0p) in one unit.
With this combination of safe position monitoring and process
guarding, PSENslock is designed for applications up to PL e
in accordance with EN ISO 13849-1, SIL 3 in accordance with
EN/IEC 62061, Category 4 in accordance with EN 954-1 and
protection type IP67. In addition, PSENslock is optimised for
mounting on to common 45 mm profi les. Combined with the
control technology from Pilz, you receive a safe, complete
solution for safety gate monitoring.
Your benefi ts at a glance
• Safe from manipulation thanks to proven transponder
technology
• Process protection thanks to magnetic guard locking
in 500 and 1000 N
• Tolerant to gate misalignment
• Four assembly directions thanks to double-sided LED indicator
PSEN sl-0.5p (500 N) available now
PSEN sl-1.0p (1000 N) available from May 2009
Safety gate systems PSENslock
Technical features PSEN sl-0.5p
Electrical data
• Holding force at 24 V/25 °C 500 N
• Power consumption (gate locked) 4.8 W
PSEN sl-1.0p
• 122 x 45 x 44
Actuator dimensions in mm (H x W x D)
• 138 x 52 x 24
PSEN sl-1.0p
Electrical data
• Holding force at 24 V/25 °C 1000 N
• Power consumption (gate locked) 7.2 W
• 172 x 45 x 44
Actuator dimensions in mm (H x W x D)
• 188 x 52 x 22
Common features of PSEN sl-0.5p/PSEN sl-1.0p
Electrical data
• Supply voltage 24 VDC
• Voltage tolerance -15 ... +10 %
• Safety outputs 2
(semiconductor outputs,
• Signal output 1
(semiconductor outputs,
Mechanical data
• Vertical or lateral offset +/-3 or +/-5 mm
• Connection type 8-pin
M12 male
• Protection type IP67
Safety guard locking device dimensions in mm (H x W x D)
Safety guard locking device dimensions in mm (H x W x D)
short circuit proof, 500 mA)
short circuit proof, 500 mA)
connector
PSENslock safety gate systems –
for safety gate monitoring.
Series connection
• In combination with PSENslock, up to PL e/Cat. 4,
PSENsgate, PSENcode SIL 3 and Cat. 4
Order numbers PSEN sl-0.5p PSEN sl-1.0p
Safety gate system incl. actuator
• PSEN sl-0.5p 1.1 unit (coded) 570
• PSEN sl-0.5p 2.1 unit (fully coded) 570 501
• PSEN sl-0.5p 2.2 unit (unique, fully coded) 570 502
• PSEN sl-1.0p 1.1 unit (coded) 570
• PSEN sl-1.0p 2.1 unit (fully coded) 570
• PSEN sl-1.0p 2.2 unit (unique, fully coded) 570 602
Safety gate system without actuator
• PSEN sl-0.5p 1.1 (coded) 570
• PSEN sl-0.5p 2.1 (fully coded) 570
• PSEN sl-1.0p 1.1 (coded) 570 610
• PSEN sl-1.0p 2.1 (fully coded) 570
Actuator
• PSEN sl-0.5p 1.1 (coded) 570
• PSEN sl-0.5p 2.1 (fully coded) 570 521
• PSEN sl-1.0p 1.1 (coded) 570
• PSEN sl-1.0p 2.1 (fully coded) 570
Accessories for PSEN sl-0.5p and PSEN sl-1.0p
• PSEN sl bracket, standard mounting bracket (folding gate) 570
• PSEN sl bracket, standard mounting bracket (sliding gate) 570 551
500
510
511
520
550
600
601
611
620
621
Webcode 3829
Webcode 4898
Online information at www.pilz.com
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfi ldern, Germany
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfi ldern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
Text and graphics in this fl yer are simply intended to give an overview of the system. No responsibility accepted for errors or omissions. 11-8-2-0-006, 2009-04, Printed in Germany, © Pilz GmbH & Co. KG, 2009
Loading...