Please note:
- Do not shine the VLED directly at people’s eyes at short
distances. This can cause short-term vision issues. Use at distances
of at least 1m from subject – or use a reector/diuser to soften
the light.
- Do not place the VLED close alcohol or ammable objects.
- Do not place liquids on or near the VLED. The product is not
water, splash or dust resistant.
- Do not pick up the camera by the VLED light when it is attached
to a camera.
- Use a soft cloth and neutral cleaner to clean the VLED light.
- Do not use strong cleaning agents or solvents such as thinner
gasoline or alcohol to clean the VLED light.
- Do not store the VLED at temperatures of +40C as high
temperatures may damage the product components.
- Do not use the VLED in outdoors in direct sunlight for an
extended period of time to prevent the product from overheating
and possible damage.
Features
The Phottix Nuada VLED Video LED is a compact and powerful
light source for still and video photography. It uses the latest in
icker-free LED technology, making it more ecient and durable.
The Nuada features:
- LCD Display
- Battery / AC Power Modes
- Adjustable brightness and color temperture
- Great for stills and video
Parts
Charging the Battery
1. Attach the battery to the charger
2. Attach the cable to the Micro USB Port on the charger
3. Attach the other end of the cable to USB port on computer,
power bank, car charger, or AC adapter.
4. The LED on the charger will light Red when charging and Green
when completed.
5. Charging time will vary depending on power source.
Battery Installation/Removal
The Phottix Nuada uses Sony-compatible NP batteries.
1. Align a compatible battery with the battery compartment.
2. Push the battery until it locks into position.
3. To remove the battery, press the Battery Release Lever, while
pressing up on the battery.
Using the Adapter Mount
Adapter Installation
1. Align the Hot Shoe Adapter with the threaded lug at the base of
the Nuada VLED.
2. Turn the lock screw clockwise to attach the Adapter to the VLED.
Mounting on a camera/tripod
1. Turn o the LED Light
2. If using the cold shoe, turn the locking ring clockwise to secure
the adapter to the hot shoe of the camera.
3. If attached to tripod: Turn the adapter clockwise to tighten and
attach it.
Removing from a camera/tripod
1. Turn o the VLED Light
2. Remove the VLED light from the camera or other mounting
accessory.
3. If on camera: Turn the locking ring counterclockwise and
remove the cold shoe attachment from the camera
4. If attached to tripod: Turn the adapter counterclockwise to
loosen and remove the adapter and VLED from the mount.
Adjusting the Adapter
1. Using the vertical locking screw the Nuada VLED can be tilted
approximately 90 degrees.
2. The Nuada VLED can be rotates approximately 180 degrees.
Power On/Off
To Power On or O, press the Power Switch
Adjusting Power / Color Temperature
1. Power On the VLED
2. The VLED Brightness Level and Color Temperture will be
displayed on the LCD Screen.
Turn the Menu Button to adjust power levels from 20%-100%
3. Press the Menu Button to toggle Temperature Control feature.
4. Turn the Menu Button to adjust Color Temperature from 3300K
t0 5600K
Technical Specifications
LED Light Panel
Battery
compartment
LCD panel
Menu button
DC supply socket
Power switch
Brightness
Color temperature
Battery level
Battery release
lever
0°
About 180° degree
at right and left
About 90° degree
in front and back
Phottix Nuada S VLED
Phottix Nuada P VLED
Instruction Manual
En
Model
Output
Volt(dc)
Model Nuada P Nuada S
Color temperature
Brightness range
Max. brightness
/ illuminance
Power
Battery Life
Color rendering index
Input power
Dimension
Weight
Accessory
3300K - 5600K
20% -100%
1082 LM / 870Lux/0.5M
16.2W
NP-F550 (2000mAh) 95min
with 100% Power
95+
Li-battery NP-F550/ F750/ F960 series,12V/2A,
DC005 General interface
255mm ×100mm ×30mm
Approx. 290 g
LED Light ×1 Hot shoe adapter ×1 Battery x1 Battery Charger x1
User manual×1 Warranty ×1
3300K - 5600K
20% -100%
1065 LM / 835Lux/ 0.5M
15W
NP-F550 (2000mAh) 100min
with 100% Power
192mm ×128mm ×30mm
Approx. 260 g
8.4V
5V
1A
red
green
Please refer to plate list exactly
Made in China
www.phottix.com
√
500mA
DC-K5
Volt(dc)
Amp
Amp
Charging
Full
Input
LED Display
Certication
Battery Model
Battery Charger Specifications
注意：
- 此項是由於操作不當引起的對身體的傷害, 危害人身安
全。
- 請勿將本產品放置超過40攝氏度的環境下, ( 如: 汽車
尾箱) , 有可能會對元器件造成損壞。
- 本裝置並未採用防塵、防濺水或防水設計, 請在雨天及
潮濕的環境下 注 意防水, 防潮。
- 不要使用稀釋劑、酒精等有機溶劑來清潔表面, 以免造
成外殼部件的損壞。
- 請勿長時間在全光照攝下使用, 以免燈體過熱造成損壞,
正常使用時會產生一定的熱量。
產品功能
Phottix Nuada LED補光燈採用最新LED蜂巢導光板設
計，亮度高、光線柔和自然、色溫穩定；高清LCD顯示
幕、操作資訊一目了然；無級調節亮度及色溫，適合拍
攝人像、兒童、婚慶等類型攝影題材, 熱靴採用金屬底
板更耐用，單反相機、DV攝像機、三腳架等都可以安裝
使用。
供電方式及電池安裝
Phottix Nuada補光燈有2種供電方式可以使用, 在室外
供電不 方便的情況下可以選用鋰電池供電，室內可以採
用專用的電源適配器供電。
鋰電池安裝
根據補光燈上所標示的鋰電池型號, 選購相同型號的鋰
電池, 按 鋰電池倉上標示的電源極性, 固定好鋰電池。
使用外置電源
根據補光燈上所標示的DC電源規格, 選用正確的電源適
配器, 連接好電源適配器之後, 按補光燈上的標示插入電
源。
安裝轉接環
1. 把轉接座對準補光燈螺紋介面,順時針擰緊轉接環 。
2. 將 三腳架螺絲插入本裝置底部的三腳架插孔中。
向左將轉接座的轉盤轉到底, 從 而將其牢牢固定
到相機上。
旋轉角度調整
使用熱靴轉換器可以輕易的調整Phottix Nuada補光燈
的補光角度。
注: 上仰和旋轉時請勿施加過大的力量, 根據拍攝的環境
或你的創作要求調整補光角度。
部件說明及功能操作
功能操作: 打開電源開關後, LCD顯示幕會顯示相關參數,
可 通過[ ]菜單按鈕，調節亮度及色溫參數。
Nuada 補光燈功能調節：
按下[ ]菜 單按鈕, 亮度值按10%增減( 20%~100% )
, 當旋轉[ ]菜 單按鈕時,亮 度值參數按1%增減。
Nuada 補光燈功能調節：
按下[ ]菜單按鈕, 切換亮度、色溫選項, 當旋轉[ ]
菜單按鈕時,增 減亮度( 20% ~100% ) 或色溫
(3300K~5600K) 參數。
技術參數
LED 導光板
電池槽
LCD顯示幕
菜單按鈕
電源插口
電源開關
亮度值
色溫值
電池電量
電池釋放開關
0°
左右180°旋轉
前後約90°
說明書
型號
輸出
電壓(dc) 8.4V
5V
1A
紅色
綠色
詳細請參考電池標籤
√
500mA
DC-K5
電壓(dc)
電流
電流
充電状态
充滿状态
輸入
LED 顯示
認證
電池型號
型號 Nuada P Nuada S
色溫
亮度範圍
最亮亮度/光照度
功率
照明時間
顯色指數
輸入電源
尺寸
重量
附件
3300K ~ 5600K
20% ~100%
1082 LM / 870Lux/0.5M
16.2W
NP-F550(2000mAh)
全亮續航95分鐘
95+
Li-battery NP-F550/ F750/ F960 系列,12V/2A,
DC005 通用介面
255mm ×100mm × 30mm
Approx. 290 g
補光燈 ×1 轉接座 ×1 說明書×1 保修卡 ×1
電池 x1 電池充電器 x1
3300K ~ 5600K
20% ~100%
1065 LM / 835Lux/ 0.5M
15W
NP-F550(2000mAh)全亮續航
100
分鐘
192mm ×128mm × 30mm
Approx. 260 g
Phottix Nuada S VLED
Phottix Nuada P VLED
Cn
Trad
Made in China
www.phottix.com
充電器參數
Loading...