Philips MC7737, MC-77/22 User Manual
Micro Hi-Fi System
MC-
MC-
77
77
pg 001-030/MC77/22-Eng 1/31/02, 7:55 PM1
1
3103 306 18501
Important notes for users in the
U.K.
Mains plug
This apparatus is fitted with an approved 13
Amp plug. To change a fuse in this type of plug
proceed as follows:
1 Remove fuse cover and fuse.
2 Fix new fuse which should be a BS1362 5 Amp,
A.S.T.A. or BSI approved type.
3 Refit the fuse cover.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5 Amp. If a plug without a fuse
is used, the fuse at the distribution board
should not be greater than 5 Amp.
Note: The severed plug must be disposed of to
avoid a possible shock hazard should it be
inserted into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with
the following code: blue = neutral (N),
brown = live (L).
¶ As these colour s may not correspond with the
colour markings identifying the terminals in
your plug, proceed as follows:
– Connect the blue wire to the terminal
marked N or coloured black.
– Connect the brown wire to the terminal
marked L or coloured red.
– Do not connect either wire to the earth
terminal in the plug, marked E (or e) or
coloured green (or green and yellow).
Before replacing the plug cover, make certain
that the cord grip is clamped over the sheath
of the lead - not simply over the two wires.
Italia
DICHIARAZIONE DI CONFORMITA’
Si dichiara che l’apparecchio MC-77 Philips
risponde alle prescrizioni dell’ar t. 2 comma 1 del
D.M. 28 Agosto 1995 n. 548.
Fatto a Eindhoven
Philips Consumer Electronics
Philips, Glaslaan 2
5616 JB Eindhoven, The Netherlands
Norge
Typeskilt finnes på apparatens bakside.
Observer: Nettbryteren er sekundert
innkoplet. Den innebygde netdelen er
derfor ikke frakoplet nettet så lenge
apparatet er tilsluttet nettkontakten.
For å redusere faren for brann eller elektrisk
støt, skal apparatet ikke utsettes for regn eller
fuktighet.
CAUTION
Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous
radiation exposure or other unsafe
operation.
Copyright in the U.K.
Recording and playback of material may
require consent. See Copyright Act 1956 and
The Performer’s Protection Acts 1958 to 1972.
2
pg 001-030/MC77/22-Eng 1/31/02, 7:55 PM2
3103 306 18501
CD
OPEN•CLOSE
$
%
1
2
3
4
DC
3
CHANGER
STANDBY-ON
ECO
POWER
iR
OPEN
AUTO REVERSE
CD/ CD-R/CD-RW COMPATIBLE
MICRO SYSTEM
NEWS
WOOX ADVANCED TECHNOLOGY SYSTEM
CLASS D AMPLIFIER SYSTEM
PLAY
STOP
DEMO STOPPAUS E
NEXT
PREV
PRESET
SEARCH/TUNE
PROG
BASS TREBLE
REC
PHONES
CD 1
CD 2
CD 3
CD 1•2•3
TUNER
TAPE
AUX/CDR
VOL
#
@
!
0
9
8
7
6
5
3
pg 001-030/MC77/22-Eng 1/31/02, 7:55 PM3
3
3103 306 18501
DK
Advarsel: Usynlig laserstråling ved åbning
når sikkerhedsafbrydere er ude af funktion.
Undgå utsættelse for stråling.
Bemærk: Netafbryderen er sekundært
indkoblet og ofbryder ikke strømmen fra
nettet. Den indbyggede netdel er derfor
tilsluttet til lysnettet så længe netstikket
sidder i stikkontakten.
S
Klass 1 laseraparat
Varning! Om apparaten används på annat
sätt än i denna bruksanvisning specificerats,
kan användaren utsättas för osynlig
laserstrålning, som överskrider gränsen för
laserklass 1.
Observera! Stömbrytaren är sekundärt
kopplad och bryter inte strömmen från
nätet. Den inbyggda nätdelen är därför
ansluten till elnätet så länge stickproppen
sitter i vägguttaget.
SF
Luokan 1 laserlaite
Varoitus! Laitteen käyttäminen muulla
kuin tässä käyttöohjeessa mainitulla tavalla
saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei
saa olla alttiina tippu-ja roiskevedelle.
Huom. Toiminnanvalitsin on kytketty
toisiopuolelle, eikä se kytke laitetta irti
sähköverkosta. Sisäänrakennettu verkkoosa on kytkettynä sähköverkkoon aina
silloin, kun pistoke on pistorasiassa.
4
pg 001-030/MC77/22-Eng 1/31/02, 7:55 PM4
3103 306 18501
Index
English ------------------------------------------------ 6
Français -------------------------------------------- 30
Español --------------------------------------------- 55
Deutsch --------------------------------------------- 80
Nederlands -------------------------------------- 105
Italiano -------------------------------------------- 130
English
Français
Español
DeutschNederlandsItalianoSvenskaDanskSuomi
pg 001-030/MC77/22-Eng 1/31/02, 7:55 PM5
Svenska ------------------------------------------- 155
Dansk --------------------------------------------- 180
Suomi --------------------------------------------- 205
Português ---------------------------------------- 230
Português
∂ППЛУИО¿ ----------------------------------------- 255
∂ППЛУИО¿Polski
Polski ---------------------------------------------- 280
5
3139 115 20743
Contents
English
General Information
Environmental information ................................ 7
Acknowledgement ............................................... 7
Supplied accessories ............................................ 7
Safety information ................................................ 7
Preparations
Rear connections ............................................. 8–9
Optional connections .......................................... 9
Inserting batteries into the remote
control .................................................................... 9
Controls
Controls on the system and remote
control ........................................................... 10–11
Basic Functions
Plug and Play ................................................. 12–13
Demonstration mode ........................................ 13
Switching the system on ................................... 13
Switching the system to standby mode ........ 13
Switching the system to Eco Power
standby mode ...................................................... 13
Power saving automatic standby ..................... 13
Dim mode ............................................................ 14
Volume control ................................................... 14
Interactive sound control .......................... 14–15
Power
Antennas connection
Speakers connection
Subwoofer Out connection
Connecting other equipment to your system
Digital Out connection
wOOx
Bass/Treble
IS (Incredible Surround)
Radio Reception
Tuning to radio stations .................................... 19
Storing preset radio stations .................... 19–20
Automatic preset programming
Manual preset programming
Tuning to preset radio stations ....................... 20
Erasing a preset radio station .......................... 20
RDS ................................................................ 20–21
Setting the RDS clock
NEWS ................................................................... 21
Tape Operation/Recording
Loading tape ........................................................ 22
Playing tapes ........................................................ 22
Rewinding/Fast forwarding ............................... 23
General information on recording ................. 23
Preparation for recording ................................ 23
One touch recording......................................... 23
CD Synchronised start recording .................. 24
Digital recording via Digital Out ..................... 24
External Sources
Listening to external sources .......................... 24
Clock/Timer
Clock setting ....................................................... 25
Display clock ....................................................... 25
Timer setting ....................................................... 26
Checking the timer
Activating/deactivating the timer
Sleep timer setting ...................................... 26–27
Maintenance.............................................. 27
Specifications ........................................... 28
CD Operation
Discs for playback .............................................. 16
Loading disc ......................................................... 16
Playing discs ......................................................... 17
Selecting a desired track/passage .................... 17
Replacing discs during playback ...................... 17
Repeat and Shuffle ....................................... 17–18
Repeat play
Random play
Programming the disc tracks ........................... 18
Erasing the programme ..................................... 18
6
pg 001-030/MC77/22-Eng 1/31/02, 7:55 PM6
Troubleshooting ............................. 29–30
3103 306 18501
General Information
This product complies with the radio
interference requirements of the European
Community.
Environmental information
All unnecessary packaging has been omitted. We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your system consists of materials which can be
recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Acknowledgement
Energy Star
As an ENERGY STAR
Partner, Philips has
determined that this product
meets the ENERGY STAR
guidelines for energy efficiency.
R
R
Supplied accessories
– Remote control
– Batteries (two AA size) for remote control
– AM loop antenna
– FM wire antenna
– AC power cord
Safety information
● Before operating the system, check that the
operating voltage indicated on the typeplate (or
the voltage indication beside the voltage
selector) of your system is identical with the
voltage of your local power supply. If not, please
consult your dealer.
● Place the system on a flat, hard and stable
surface.
● Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
● Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
● If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens of the disc
unit inside the system. Should this occur, the CD
player would not operate normally. Leave the
power on for about one hour with no disc in the
system until normal playback is possible.
● The mechanical par ts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
● When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
English
pg 001-030/MC77/22-Eng 1/31/02, 7:55 PM7
7
3103 306 18501
Preparations
Fix the claw
to the slot
English
AM loop
antenna
speaker
DIGITAL
OUT
(right)
R
AUX/CDR IN
SUB
WOOFER OUT
R
L
SPEAKERS 6Ω
Rear connections
The type plate is located at the rear of the
system.
For users in the U.K.: please follow the
instructions on page 2.
A Power
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change connections with
the power switched on.
+
–
–
+
L
C
FM wire antenna
AC
MAINS
B
AM ANTENNA
FM ANTENNA 75Ω
B Antennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
AM Antenna
speaker
(left)
A
AC power cord
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it.
8
pg 001-030/MC77/22-Eng 1/31/02, 7:55 PM8
¶ Position the antenna as far as possible from a TV,
VCR or other radiation source.
3103 306 18501
Preparations
1
2
FM Antenna
¶ For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
terminal.
C Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
(FRONT) terminals, right speaker to "R" and left
speaker to "L", coloured (marked) wire to "+"
and black (unmarked) wire to "-".
1
● Fully inser t the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
2
Connecting other equipment to your
system
Connect the audio left and right OUT terminals
of a TV, VCR, Laser Disc player, DVD player or
CD Recorder to the AUX/CDR IN terminals.
Note:
– If you are connecting equipment with a
monaural output (a single audio out terminal),
connect it to the AUX/CDR IN left terminal.
Alternatively, you can use a “single to double” cinch
cable (still be monaural sound).
Digital Out connection
Connect this digital output when recording on
any audio equipment with digital input (CD
Recorder, Digital Audio Tape [DAT] deck, Digital
to Analogue Converter and Digital Signal
Processor, for example). Use a cinch cable to
connect the DIGITAL OUT terminal to the
digital input terminal of the equipment.
Inserting batteries into the
remote control
Insert two batteries (Type R06 or AA) into the
remote control with the correct polarity as
indicated by the + and - symbols inside the
battery compar tment.
English
Optional connections
The optional equipment and connecting cords
are not supplied. Refer to the operating
instructions of the connected equipment for
details.
Subwoofer Out connection
Connect the subwoofer to the SUBWOOFER
OUT terminal. The subwoofer reproduces just
the low bass sound effect (explosions or the
rumble of spaceships, for example).
pg 001-030/MC77/22-Eng 1/31/02, 7:55 PM9
CAUTION!
– Remove batteries if they are exhausted
or will not be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed off properly.
9
3103 306 18501
Loading...