Philips GC6068 Service Manual
Boiler steam iron Provapor Azur
GC6068
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
Features
Iron
- Careeza soleplate
- Max steam output 90 grams/min
- Shot of steam (SOS)
- Cord length 1.9 m
Boiler
- Inox boiler
- Capacity 1 litre
- Stainless steel tray assy
- Ergonomic backrest
- Vario steam
- Steam ready light indicator
- Anti-scaling funnel
Safety Information
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
Voltage : 220 - 240 V
Frequency : 50 - 60 Hz
Power consumption : Iron : 800 W
Boiler : 1200 W
Pressure : 3.5 bar
Dimension (F-box) : 41 x 38 x 20 cm
Weight : 3850 grams
Water advice : Suitable for tap water use. However if
the tap water in your area is very hard,
we advise you to mix it with a equal
portion of distilled water or to use
distilled water only.
Soleplate
Careeza is a multi layer chemical substance that gives an
excellent gliding over various fabrics and better care for the
garments.
Vario steam
The vario steam function allows user to have control over the
steam rate and this prevent over moisturising the cloth.
Anti calc
The anti calc is integrated in the funnel and softens the water
that goes into the boiler.
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
03/08
DISASSEMBLY ADVICE - IRON
GC6068
REPLACE DIAL 1
REPLACE BACKPLATE 2
disassemble DIAL 1
remove screw A
remove connection
remove hose
REPLACE INLAY 3
STEAM KNOB 4
IRON LAMP 5
MICRO SWITCH 6
REPLACE IRON HANDLE 7
disassemble DIAL 1
remove screw A
remove connection
remove hose
disassemble BACKPLATE 2
disassemble INLAY 3
STEAM KNOB 4
IRON LAMP 5
MICRO SWITCH 6
remove screw B (3x)
REPLACE
INTERMEDIATE CABLE 8
SWIVEL 9
DEVIATOR ASSY 10
THERMOSTAT BUSH 11
disassemble DIAL 1
remove screw A
remove connection
remove hose
disassemble BACKPLATE 2
disassemble INLAY 3
STEAM KNOB 4
IRON LAMP 5
MICRO SWITCH 6
remove screw B (3x)
disassemble IRON HANDLE 7
REPLACE IRON SKIRT 12
SOLEPLATE UNIT 13
disassemble DIAL 1
remove screw A
remove connection
remove hose
disassemble BACKPLATE 2
disassemble INLAY 3
STEAM KNOB 4
IRON LAMP 5
MICRO SWITCH 6
remove screw B (3x)
disassemble IRON HANDLE 7
disassemble INTERMEDIATE
CABLE 8
SWIVEL 9
DEVIATOR ASSY 10
THERMOSTAT
BUSH 11
remove screw C (3x)
REPAIR INSTRUCTIONS - IRON
- For disassembly, you will need a Torx screwdriver: 362 TR T20 x 100
STAND IRON
Main
switch
F
N
Steam
ready
Boiler
thermostat
Boiler
heating
element
Cut
out
Electro-
valve
Steamswitch
p
Thermostat
2-5
Loading...