Philips GC2220 Service Manual

Steam Iron Mistral
GC2220
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
Features
- Stainless steel soleplate
- Steam output (28 grams/min)
- Shot of Steam (60 grams/min)
- Vertical Shot of Steam
- 3 steam level
- Spray feature
- Tank capacity (250 ml)
- Cord length (1.8 m)
- 360 degrees swivel
- Integrated calc-clean feature
- Integrated cord winder feature
- Filling door
- Drip Stop feature
Safety Information
- This product meets the requirements regarding interference suppression on radio and TV.
- After the product has been repaired, it should function properly and has to meet the safety requirements and legal regulations as officially laid down at this moment.
TECHNICAL INFORMATION
Voltage : 230 - 240 V Frequency : 50 - 60 Hz Power : 1500 - 1800 W Dimension (F-box) : 306 (L) x 128 (W) x 157 (H) mm Product weight : 1.2 kg
Water Advice
Suitable for tap water use. Advice to mix with equal portion of distilled water or use only distilled water if the tap water is very hard.
Stainless Steel Soleplate
The stainless steel soleplate glides smoothly & very easy to clean. Stainless steel has a high scratch resistance and its durability is very competitive in the market.
Shot of Steam
The shot of steam features a steam boost (60 grams/min) that helps to remove stubborn wrinkles easily.
Vertical Shot of Steam
This features a steam boost in vertical position to remove wrinkles in hanging garments.
Integrated Calc-clean
This ensures a longer life time of the iron and to allow the use of normal tap water.
Drip Stop
Water is only released into steam chamber via the tank valve when the soleplate temperature is high enough. If the temperature is too low, the tank valve is closed by means of a bi-metal disc. This prevents water from dripping onto garment.
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
03/12
DISASSEMBLY ADVICE
GC2220
BACKPLATE 1
BALL SWIVEL 2
SWIVEL PLATFORM 20
CORDSET 3
Remove Screw A 1x Remove Backplate 1 Remove Screw B 2x (cord clamp)
OPERATION KNOB 4
DOSING UNIT 5
INLAY 6
FILLING DOOR 19
PUMP 8
NOZZLE 9
Remove Screw A 1x Remove Backplate 1 Remove Screw B 2x (cord clamp) Remove Cord set 3 Remove Dosing unit 5 Remove Screw D 1x Remove Inlay 6 Remove Operation knob 4
DIAL 10
RATTLE SPRING 11
TANK SET 12
TANK SEAL 106
LAMP ASSEMBLY 13
LAMP HOLDER 18
Remove Screw A 1x Remove Backplate 1 Remove Screw B 2x (cord clamp) Remove Cord set 3 Remove Dosing unit 5 Remove Screw D 1x Remove Inlay 6 Remove Operation knob 4 Remove Screw C 3x
COVER 14
THERMOSTAT BUSH 15
SOLEPLATE 16
SEAL 102, 103
Remove Screw A 1x Remove Backplate 1 Remove Screw B 2x (cord clamp) Remove Cord set 3 Remove Dosing unit 5 Remove Screw D 1x Remove Inlay 6 Remove Operation knob 4 Remove Screw C 3x Remove Tank set 12 Remove Screw E 3x Remove Cover 14
REPAIR INSTRUCTIONS
- Due to the high voltage of the iron, ONLY the specified cordsets must be used.
- Thermostat that is fitted to the soleplate (Pos 16) was pre-adjusted by the suppliers and secured by glue. To avoid mal-function of the iron, NEVER re-adjust the thermostat.
- No information about the type number and voltage is stamped onto the typeplate. When replacing the cover (typeplate is at the bottom), engrave at least the type number & voltage on the typeplate with a sharp object.
- Part number 107, 108 cannot be ordered separately.
OPTIONAL (accessories)
- No specific issues
2-4
Loading...
+ 2 hidden pages