Philips FW880SW/P22, FW880SP/P22, FW880PP/22 User Manual

FW 880P

Mini HiFi System with Dolby Pro Logic

FW 880W

FW880P-880W/22-Eng 6/15/00 4:06 PM Page 1

English Français

Español

Nederlands Italiano Svenska Dansk Suomi Português

∂ППЛУИО¿

Deutsch

FW880P FW880W

FW880P-880W/22-Eng 6/15/00 4:06 PM Page 2

EnglishFrançais

Español

NederlandsItalianoSvenskaDanskSuomiPortuguês

∂ППЛУИО¿

Deutsch

INDEX

English . . . . . . . . . . . . . . . . . . . .4

Français . . . . . . . . . . . . . . . . . .28

Español . . . . . . . . . . . . . . . . . . .56

Deutsch . . . . . . . . . . . . . . . . . . .82

Nederlands . . . . . . . . . . . . . . .110

Italiano . . . . . . . . . . . . . . . . . .138

Svenska . . . . . . . . . . . . . . . . .166

Dansk . . . . . . . . . . . . . . . . . . .194

Suomi . . . . . . . . . . . . . . . . . . .220

Português . . . . . . . . . . . . . . . .244

∂ППЛУИО¿ . . . . . . . . . . . . . . . . .270

CLASS 1

LASER PRODUCT

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:

1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A.

or BSI approved type.

3 Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:

• Connect the blue wire to the terminal marked N or coloured black.

• Connect the brown wire to the terminal marked L or coloured red.

• Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.

Recording and playback of material may require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.

Typeskilt finnes på apparatens underside.

Observer:

Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.

For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet.

Norge

DICHIARAZIONE DI CONFORMITA’

Si dichiara che l’apparecchio FW880P e FW880W Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548.

Fatto a Eindhoven , il 2/2/1998

Philips Consumer Electronics

Philips, Glaslaan 2

5616 JB Eindhoven, The Netherlands

Italia

FW880P-880W/22-Eng 6/15/00 4:06 PM Page 3

General Information . . . . . . . . . . . . . . . . . . . . . . . .5

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . .5

Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 7

Dolby Pro Logic . . . . . . . . . . . . . . . . . . . . . . . . .8 - 9

Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 12

Operating the System . . . . . . . . . . . . . . . . . .13 - 14

CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 - 17

Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 - 19

Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 - 21

AUX•DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 - 25

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .27

English

CONTENTS

FW880P-880W/22-Eng 6/15/00 4:06 PM Page 4

General Information

• The type plate (which contains the serial number) is located at the rear of the system.

• Recording is permissible if copyright or other rights of third parties are not infringed.

• This product complies with the radio interference requirements of the European Community.

Environmental Information

All unnecessary packaging material has been omitted. We have done our utmost to make the packaging easily separable into three mono-materials: cardboard (box), polystyrene foam (buffer) and polythene (bags, protective foam sheet).

Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Acknowledgement

Dolby Pro-Logic, the Dolby B NR System and the doubleD symbol d are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories Licensing Corporation.

Accessories

(Supplied)

– Remote control – Batteries (2 x AA size) for remote control – AM loop antenna – FM antenna wire – AC power cord – Philips FB 5CS Surround package (includes 2 x

surround rear speakers and 1 x center speaker) for model FW880P only.

– Model FB 209W wireless surround speaker package

(includes 2 x wireless active surround rear speakers and 1 x center speaker and a transmitter unit) for model FW880W only.

Safety Information

• Before operating the system, check that the operating voltage indicated on the type plate (or the voltage indication beside the voltage selector) of your system is identical with the voltage of your local power supply. If not, please consult your dealer. The type plate is located at the rear of your system.

• When the system is switched on, do not move it around.

• Place the system on a solid base (e.g. a cabinet).

• Place the system in a location with adequate ventilation to prevent internal heat build-up in your system.

• The system incorporates a built-in safety feature that prevent overheating.

• Do not expose the system to excessive moisture, rain, sand or heat sources.

• Under no circumstances should you repair the unit yourself, as this will invalidate the warranty!

• If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens of the CD unit inside the system. Should this occur, the CD player will not operate normally. Leave the power on for about one hour with no disc in the unit until normal playback is possible.

• Electrostatic discharge may cause unexpected problems. See whether these problems disappear if you unplug the AC power cord and plug it in again after a few seconds.

• To disconnect the system from the power supply completely, remove the AC power plug from the wall socket.

English

GENERAL INFORMATION SAFETY INFORMATION

FW880P-880W/22-Eng 6/15/00 4:06 PM Page 5

English

PREPARATION

Rear Connections

FW880P-880W/22-Eng 6/15/00 4:06 PM Page 6

VOLUME

POWER

CROSSOVER

60 Hz 120 Hz

MIN

MAX

DIGITAL AUDIO

EQUIPMENT

–

AUDIO OUT

L R

DIGITAL OPTICAL OUT

SUBWOOFER OUT

CENTER

–

REAR SURROUND +

L – – R +

MAINS

AM AERIAL

AUX IN

FM AERIAL 75Ω

SURROUND

LINE OUT

OUT

FRONT

– –

–

CENTER

A AM Antenna Connection

Connect the supplied loop antenna to the AM AERIAL terminal. Place the AM loop antenna far away from the system and adjust its position for the best reception.

B FM Wire Antenna Connection

Connect the supplied FM wire antenna to the FM 75 Ω terminal. Adjust the position of the FM antenna for the best reception.

Outdoor Antenna

For better FM stereo reception connect an outdoor FM antenna to the FM AERIAL 75 Ω terminal using a 75 Ω coaxial wire.

C Front Speakers’ Connection

• Connect the right speaker to Front terminal R, with

the red wire to + and the black wire to -.

• Connect the left speaker to Front terminal L, with the

red wire to + and the black wire to -.

• Clip the stripped portion of the speaker wire as shown.

For Dolby Pro Logic Connection, see page 8.

D Center Speaker Connection

• Connect the black or non-marked wires to the black CENTER terminal and the blue or marked wires to the blue CENTER terminal.

E Rear Speakers’ Connection

(For model FW880P only)

• Connect the black or non-marked wires to the black REAR terminals and the white or marked wires to the grey REAR terminals.

F Wireless Surround Out Connection

(For model FW880W only)

You may connect transmitter unit of the wireless rear speakers (Model FB 209W is supplied with FW880W) to the SURROUND OUT terminal instead of the wired rear speakers. Be sure to follow the instructions supplied with the wireless rear speakers.

Note: – Availability of wireless transmitter and its peripherals

are subjected to the approval of local authorities. Please check with respective local safety or approving authority.

G Connecting other equipment to your

system

You can connect the audio left and right out terminals of a TV, VCR, Laser Disc or DVD player to the AUX IN terminals at the rear of the system.

H Subwoofer Out Connection

You can connect either an optional active subwoofer or an optional wireless active subwoofer to the SUBWOOFER OUT terminal. The wireless system uses a radio frequency transmitter. The subwoofer reproduces just the low bass effect (e.g. explosions, the rumble of

the spaceships, etc.). Be sure to follow the instructions supplied with the subwoofer unit.

I Line Out Connection

(wireless ready)

You may install additional front active speakers away from the system (e.g. in another room) to reduce the inconvenience of running long speaker wires across rooms. You can place as many remote speakers as you like provided that they operate at the same radio frequency. Connect the wireless radio frequency transmitter to the LINE OUT terminals. Place the active speakers at your preferred location. Be sure to follow the instructions supplied with the active speakers.

J Digital Optical Out

You can record the digital sound from the CD, through this output, on any audio equipment with digital input (e.g. digital amplifier, Digital Audio Tape (DAT) deck, Digital to Analog Converter and Digital Signal Processor). Connect one end of the optical cable (not supplied) to the DIGITAL OPTICAL OUT socket and the other end to the audio equipment with digital input. When the DIGITAL OPTICAL OUT socket is not used, be sure to cover the socket with the supplied dust cap.

K AC Power Supply

After all other connections have been made, connect the AC power cord to the system and to the wall outlet.

English

PREPARATION

FW880P-880W/22-Eng 6/15/00 4:06 PM Page 7

12 mm

unlock

lock

Dolby Pro Logic

This state of the art Dolby Pro Logic mini system enables you to experience and enjoy a Home Cinema sound ambience. The Pro Logic system allows more accurate definition of the individual sound sources. It produces greater sound separation between channels and provides pinpoint sound localisation. Pro Logic provides four outputs which are called Left, Center, Right and Surround (Rear). Front signals are produced from the pair of Left and Right speakers and a Center speaker. The surround signal is reproduced by two speakers placed at the rear of the listening area. Although the surround signal is mono, a pair of speakers is necessary to produce the correct diffused sound field.

This Pro Logic decoder enables you to decode the following mode :

Dolby Surround, Center Phantom,

Dolby 3 Stereo

or normal

Stereo

Setting up the Dolby Pro Logic system

You need to do a proper set up in order for you to enjoy the Home Cinema sound to the fullest. First you need to do a complete speakers’ connection.

5-Speakers Connection

•

Front speakers :

Connect the black wires to the black FRONT terminals and the red wires to the red FRONT terminals.

•

Center speaker :

Connect the black or non-marked wires to the black CENTER terminal and the blue or marked wires to the blue CENTER terminal.

•

Rear (surround) speakers :

Connect the black or non-marked wires to the black REAR terminals and the white or marked wires to the grey REAR terminals.

You may also connect a pair of wireless

rear speakers (not supplied for model FW880P) from the SURROUND OUT terminals.

Positioning the Speakers

To get the best surround sound effect, place the speakers as follow.

Front Left and Right Speakers

For best listening effect, it is recommended to have the Left and Right speakers to form an angle of approximately 45 degrees to the listener. The speakers are magnetic shielded. Should the magnetic field from

the speakers affect the picture of the television, you should increase the separation distance.

Center Speaker

For best directional effect, try to have the center speaker at the same height as the left and right speakers and as close as possible to the screen. Place it directly above or beneath the television set.

Rear (surround) Speakers

The surround speaker should be placed at normal listening ear level. It can also be mounted on the wall at the back of the room. Most important , sometimes you need to experiment creatively when placing the surround speakers in order to obtain the most ideal sound projection.

Test Tone

This feature enables you to adjust the Front Left, Front Right, Center and Surround sound level of the respective speakers in Dolby Pro Logic mode.

You must sit at the ideal sitting position and use the remote control to perform this operation.

1 Press CD, TUNER, TAPE or AUX•DVD to switch on

the system.

2 Press TEST TONE.

™ A test signal is generated and it will move through

the Left, Center, Right and Surround speakers respectively.

™ “TESTTONE” followed by “ADAPT

BALANCE, CENTER AND REAR LEVEL” will be displayed.

™ The test signal will last for about 90 seconds.

English

DOLBY PRO LOGIC

FW880P-880W/22-Eng 6/15/00 4:06 PM Page 8

CENTER

REAR

LEFT

SURROUND

LEFT

REAR

RIGHT

FRONT

LEFT

REAR SURROUND FRONT

FRONT LEFT

FRONT RIGHT

CENTER

SPEAKER

MINI HIFI SYSTEM

FRONT

RIGHT

SURROUND

RIGHT

3 Press the BALANCE L to adjust the desired sound

level of front left speaker. ™ The display will show BAL L+XX.

4 Press the BALANCE R to adjust the desired sound

level of front right speaker.

™ The display will show the sound level and BAL

R +XX.

5 Press the CENTER + or - to adjust the sound

level of center speaker.

™ The display will show either CENT +XX or

-XX.

6 Press the REAR + or - to adjust the desired

sound level of surround speaker.

™ The display will show either REAR +XX or

-XX.

7 Adjust the sound level of all the speakers until they

are of the same apparent loudness. When you are satisfied with the setting, press TEST TONE again to switch off the test signal.

Note: – It is advisable to set the speakers’ level at normal

listening level.”

“ denotes the sound level.

When you have completed the Dolby Pro Logic setup, you are ready to experience and enjoy a Home Cinema sound ambience.

• Press DOLBY PRO LOGIC (DPL) repeatedly to select

and cycle through the various sound mode.

Dolby Surround ™Center Phantom ™Dolby 3 Stereo ™Stereo ™Dolby Surround …

™ The Dolby Pro Logic Control display panel will light

up with the respective selection.

Dolby Surround

This setting is for a full Dolby Surround Pro Logic mode.

• Press DOLBY PRO LOGIC to select the Dolby

Surround mode. ™ The display message

“DOLBY SURROUND” will

be displayed.

™ The DPL Control

display panel will light up.

Dolby Center Phantom

This setting is for use without the center speaker. It redistributes the center channel information to the left and right speakers providing conventional stereo across the front.

• Press DOLBY PRO LOGIC to select the Dolby Pro

Logic Center Phantom mode. ™ The display message

“CENTER PHANTOM” will

be displayed.

™ The DPL Control

display panel will light up.

Dolby 3 Stereo

This setting is for use where full surround is not required, but a wide stereo sound is desirable. It only requires the left, right and center speakers.

• Press DOLBY PRO LOGIC to select the Dolby 3

Stereo mode. ™ The display message

“DOLBY 3 STEREO” will be

displayed.

™ The DPL display

panel will light up.

Normal Stereo

This setting is for normal stereo sound without Dolby Pro Logic. It only requires the left and right speakers.

• Press DOLBY PRO LOGIC to select the Stereo mode.

™ The display message

“STEREO” will be displayed.

™ The DPL display

panel will light up.

Important!

1. To listen to the optimum Dolby Pro Logic sound effect, it is recommended to switch on DPL in combination with “Classic” and without Incredible Surround.

2. Dolby Pro Logic mode will automatically switch to normal Stereo mode when a headphones is connected.

3. It is recommended to switch to normal stereo mode when you do recording on a tape.

English

DOLBY PRO LOGIC

FW880P-880W/22-Eng 6/15/00 4:06 PM Page 9

DOLBY PRO LOGIC

DISPLAY

DOLBY PRO LOGIC

DISPLAY

DOLBY PRO LOGIC

DISPLAY

DOLBY PRO LOGIC

DISPLAY

+ 18 hidden pages