Philips CE233 User Manual

Always there to help you
Register your product and get support at www.philips.com/support
Question?
Contact
Philips
CE233
User manual
Contents
1 Safety 2
2 Your car audio system 3
Introduction 3 What's in the box 3 Overview of the system 4
3 Install the car audio system 7
Connect wires 7 Mount into the dashboard 8 Attach the front panel 9
4 Get started 10
For the rst time use 10
Set the time format 10 Set the clock 10 Select a source 10 Select a listening zone 10 Mute the button beep 11
5 Listen to radio 11
Switch to radio mode 11 Select a tuner region 11 Select a tuner sensitivity 11 Search for a radio station 12 Store radio stations in memory 12 Play with RDS 12
9 Additional information 17
Charge your USB device 17 Reset the system 17 Replace the fuse 17
10 Product information 18
11 Troubleshooting 18
12 Notice 19
Care of the environment 19 Trademark notice 19 Copyright 19
6 Play from a storage device 14
Control play 15 Switch tracks 15
7 Listen to an external player 16
8 Adjust sound 16
1 Safety
Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply.
Modication of the product could result
in hazardous radiation of EMC or other unsafe operation.
The device is designed for negative ground (earth) 12 V DC operation only.
To ensure safe driving, adjust the volume to a safe and comfortable level.
Improper fuses can cause damage or re. When you need to change the fuse,
consult a professional.
Use only the supplied mounting hardware for a safe and secure installation.
To avoid short circuits, do not expose the device to rain or water.
The device shall not be exposed to dripping or splashing.
Do not place any sources of danger on the device (e.g. liquid lled objects, lighted
candles).
Never insert objects into the ventilation slots or other openings on the device.
Clean the device with soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the device.
2 EN
2 Your car audio
What's in the box
system
Congratulations on your purchase, and
welcome to Philips! To fully benet from the
support that Philips offers, register your product at www.philips.com/welcome.
Introduction
With this system, you can:
enjoy audio from USB storage devices, SD card, SDHC card, and other external players, and
listen to radio stations.
You can enrich sound output with these sound effects:
Dynamic bass boost (DBB)
Digital sound control (DSC)
Playable media:
USB storage device
Compatibility: USB 2.0, USB 1.1
Class support: MSC (Mass Storage
Class)
Maximum capacity: 32 GB
SD/SDHC card
Maximum capacity: 32 GB
Files
File system: FAT16, FAT32
Maximum number of folders: 99
• Maximum number of tracks/les: 999
Maximum level of directory: 8
• .mp3 les
Sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz Bitrates: 8-320 kbps and variable bitrates
ID3 tag V2.0 or later
Unsupported les:
AAC, WAV, and PCM les
Check and identify the contents of the package:
ab c
ed
a Main unit (with a sleeve) b Carrying case (with front panel included) c Trim plate d Disassembly tool X 2 e User manual
Overview of the system
ab cde
v
ts rqpo nm lkji hfg
u
a
Unlock the front panel.
b
Return to the previous menu.
c
For .mp3 tracks, press to select the
previous folder.
In radio mode, press to select a tuner
band.
Press and hold to activate the selection
of listening zones.
d LCD screen
w
e AUDIO IN
f
g
h DBB
x
Connect to the audio output socket (usually the headphone socket) of an external device.
Connect to a USB storage device.
Press to enable or disable the MAX
Sound feature.
Press to enable or disable the DBB (dynamic bass boost) sound effect.
4 EN
i
Start, pause, or resume the play of tracks.
In radio mode, press to select the preset radio station of No. 6.
In radio mode, press and hold to store the current radio station at channel No. 6.
j
In radio mode, press to select the preset radio station of No. 5.
In radio mode, press and hold to store the current radio station at channel No. 5.
k
In radio mode, press to select the preset radio station of No. 4.
In radio mode, press and hold to store the current radio station at channel No. 4.
For .mp3 tracks, press repeatedly to select a play mode: play all tracks randomly ([SHU ALL]), play tracks in the current folder randomly ([SHU FLD]), or play all tracks in the storage device in sequence ([SHU OFF]).
l
In radio mode, press to select the preset radio station of No. 3.
In radio mode, press and hold to store the current radio station at channel No. 3.
For .mp3 tracks, press repeatedly to select a repeat mode: repeat the current track ([REP ONE]), repeat all tracks in the current folder ([RPT FLD]), or repeat all tracks in the storage device ([RPT ALL]).
m
In radio mode, press to select the preset radio station of No. 2.
In radio mode, press and hold to store the current radio station at channel No. 2.
For .mp3 tracks, press to access the folder list.
n
In radio mode, press to select the preset radio station of No. 1.
In radio mode, press and hold to store the current radio station at channel No. 1.
For .mp3 tracks, press to access the track list.
o
/DISP
Press repeatedly to display available information about the current track.
Press repeatedly to display available RDS information.
Press and hold to display the set clock.
p AS/SOURCE
Press repeatedly to select a source.
In radio mode, press and hold to
activate the automatic search of radio stations.
q
For .mp3 tracks, press to select the next folder.
In radio mode, press to select a tuner band.
r
Press to turn on the system.
Press and hold to turn off the system.
Press to mute the speakers or release
them from mute status.
• Press to conrm an option.
Rotate to switch between menu
options.
Rotate to adjust the volume level.
s
Press repeatedly to select a preset sound equalizer.
Press and hold to activate the setup of bass, treble, balance, and fader.
t
/
Tune to a radio station.
Press to skip to the previous/next
track.
Press and hold to rewind a track or search fast forward.
Loading...
+ 15 hidden pages