Philips AD7050W Manual

Always there to help you

Register your product and get support at

www.philips.com/welcome

AD7050W

Question?

Contact

Philips

User manual

Contents

1	Important	2
	Safety	2
	Notice	3
2	Your Entertainment System	4
	Introduction	4
	What's in the box	4
	What else you need	4
	Overview of the main unit	5
	Get started to use AirPlay	5
3	Prepare	6
	Connect power	6
	Turn AD7050W on	6
4	Connect to your home Wi-Fi
	network for AirPlay	7
	Method 1: Use iOS5 Wi-Fi network
	login sharing	7
	Method 2: Connect to a WPS router	8
	Method 3: Connect to a non-WPS
	Wi-Fi router	9
5	Play	16
	Stream audio from your iTunes music
	library to AD7050W	16
	Use advanced sound settings	18
	Play/charge your iPod/iPhone/iPad
	through USB socket	18
	Play from an external device	19
6	Update firmware	20
	Download the update file	20
	Update from the configuration page	20
7	Product information	22
	Specifications	22
8	Troubleshooting	23

E n g l i s h

EN 1

1 Important

Safety

Information for Europe:

Know these safety symbols

The 'exclamation mark' calls attention to features for which you should carefully read the supplied literature to prevent operating and maintenance problems.

The 'lightening bolt' symbol indicates uninsulated components within the product that can cause an electric shock.

To reduce the risk of fire or electric shock, do not expose the product to rain or moisture and do not place any objects filled with liquids, such as vases, on the product.

ARead these instructions.

BKeep these instructions.

CHeed all warnings.

DFollow all instructions.

EDo not use this product near water.

FClean only with dry cloth.

GDo not block any ventilation openings. Install in accordance with the manufacturer's instructions.

HDo not remove the casing of this product.

IDo not expose the product to dripping / splashing water, rain or high humidity.

JKeep this product away from direct sunlight,naked flames or heat.

KDo not install near any heat sources such as radiators, heat registers, stoves, or other electrical equipment (including amplifiers).

LDo not place any other electrical equipment on the product.

MDo not place any sources of danger on the product (e.g. objects containing liquids,burning candles).

NWhere the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Warning

•• Never remove the casing of this apparatus.

•• Never lubricate any part of this apparatus.

•• Never place this apparatus on other electrical equipment.

•• Keep this apparatus away from direct sunlight, naked flames or heat.

•• Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power.

Risk of overheating! Never install this apparatus in a confined space.Always leave a space of at least four inches around this apparatus for ventilation. Ensure curtains or other objects never cover the ventilation slots on this apparatus.

2 EN

Notice

This product complies with the radio interference requirements of the European

Community.

This product complies with the requirement of the 1999/5/EC directive.

Modifications

Modifications not authorized by the manufacturer may void user's authority to operate this product.

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC.

Please inform yourself about the local separate collection system for electrical and electronic products.

Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential

negative consequences for the environment and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to

separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of

packaging materials, exhausted batteries and old equipment.

“Made for iPod,”“Made for iPhone,” and“Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet

Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.

AirPlay, iPod, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc.

Class II equipment symbol:

CLASS II apparatus with double insulation, and no protective earth provided.

Note

•• The type plate is located on the bottom of the apparatus.

E n g l i s h

EN 3

2Your Entertainment System

Congratulations on your purchase, and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus.Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Introduction

Apple AirPlay technology enables you to play your iTunes music library, hosted on a Mac, PC, iPhone, iPod touch, or iPad on any AirPlayenabled device (for example, your AD7050W) connected to the Wi-Fi network.

With an AirPlay-enabled device (for example, your AD7050W), you can:

•stream audio from your iTunes music library to any room in your house

•choose which AirPlay-enabled devices you want to play music on (if you have more than one such devices in your house)

•stream audio to multiple AirPlayenabled devices at the same time (from the iTunes music library on your PC/Mac only)

Tip

•• Please visit www.philips.com/welcome for information about more Philips AirPlay-enabled devices.

With AD7050W, you can also:

•charge your iPod/iPhone/iPad through the USB socket with an Apple USB cable (not supplied).

•play your iTunes music library on your iPod/iPhone/iPad through the USB socket directly while charging.

•play music from other audio devices through the MP3-LINK socket.

What's in the box

Check and identify the contents of your package:

•Main unit (with a built-in Wi-Fi module)

•1 x AC power adapter

•User manual (in CD-ROM)

•Quick start guide

What else you need

To stream audio wirelessly by AirPlay, you need:

•AWi-Fi certified router

•A host for your iTunes music library, for example, an iPod touch/iPhone/ iPad installed with iOS 4.3 (or later) or a Wi-Fi enabled PC/Mac installed with iTunes 10 (or later)

Your AD7050W should be connected to the same local network as your iTunes host device through the Wi-Fi router.

List of compatible iTunes host devices for AirPlay

In terms of AirPlay,AD7050W is compatible with:

•a Wi-Fi enabled PC/Mac installed with iTunes 10 (or later); and

4 EN

•the following iPod/iPhone/iPad models installed with iOS 4.3 (or later):

•iPad 2

•iPad

•iPhone 4S

•iPhone 4

•iPhone 3GS

•iPod touch (3rd, and 4th generation)

Overview of the main unit

power	VOL

AVOL +/-

•Adjust volume.

•Press and hold both buttons to reset the unit.

BPOWER

•Press to turn the unit on.

•In power-on mode, press and hold to turn the unit off.

•In power-on mode, press to turn the bottom light on/off.

CWI-FI SETUP button/indicator

•Connect the unit to a Wi-Fi network.

•Show the Wi-Fi connection status of the unit.

D MP3-LINK
• Connect an external audio player	gl i s h
through the supplied MP3 link cable.
E USB	E n
• Connect an iPod/iPhone/iPad through
an Apple USB cable (not supplied).
F DC IN
• Connect the power adaptor.
G Bottom light

Get started to use AirPlay

To get started with AirPlay, you need to:

1Upgrade your iPod touch/iPhone/iPad to the latest iOS version (iOS 4.3 or later).

•Or install the latest version of iTunes (iTunes 10 or later) on your PC/Mac.

2Connect power to AD7050W, then turn it on (see 'Prepare' on page 6).

3Connect AD7050W to your existing home Wi-Fi network (see 'Connect to your home Wi-Fi network for AirPlay' on page 7).

4Make sure that your iPod touch/iPhone/ iPad or PC/Mac are also connected to the same Wi-Fi network.

EN 5

3 Prepare

Always follow the instructions in this chapter in sequence.

Connect power

Caution

•• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit.

•• Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord.

•• Before you connect the AC adaptor, make sure that you have completed all the other connections.

•Connect the AC power cord to

•the DC IN socket on the back of the unit.

•the wall power socket.

Turn AD7050W on

1Press on the back to turn the unit on.

2Wait for successful boot-up of the unit.

»»The boot-up takes up to 25 seconds.

»»During boot-up, the Wi-Fi SETUP indicator on the back of the unit blinks yellow.

»»After boot-up, the Wi-Fi SETUP indicator turns solid yellow.

•To turn the unit off, press and hold .

•To turn the unit on again, press and hold once more.

Tip

•• In power-on mode, you can press to turn on or off the LED light at the bottom of the unit.

6 EN

4Connect to your home WiFi network for AirPlay

To connect AD7050W to your existing home

Wi-Fi network, you need to apply your home

Wi-Fi settings to AD7050W.

Choose your best setup method based on the preconditions listed below.

Precondition	Setup method
You have an iPod	Choose method 1
touch/iPhone/iPad	(recommended) (see
upgraded to iOS 5.0	'Method 1: Use iOS5
or later.	Wi-Fi network login
	sharing' on page 7).

Your Wi-Fi router is enabled with WPS (Wi-Fi Protected Setup) and supports PBC (Push Button Connection).

Choose method 2 (see 'Method 2: Connect to a WPS router' on page 8).

You have a Wi-Fi enabled device with an Internet browser, such as an iPod touch/ iPhone/iPad or a Wi-Fi enabled PC/Mac.

Choose method 3 (see 'Method 3: Connect to a non-

WPS Wi-Fi router' on page 9).

Before connection of AD7050W to you home

Wi-Fi network, make sure that:

Ayour Wi-Fi router is powered on and working properly.

BAD7050W has been powered on and booted up successfully (see 'Turn AD7050W on' on page 6).

Once connected successfully,AD7050W will remember your home Wi-Fi settings.Then you can enjoy AirPlay whenever AD7050W is powered on and connected to your home WiFi network automatically.

Method 1: Use iOS5 Wi-Fi network login sharing

1Connect your iPod touch/iPhone/iPad to your home Wi-Fi network.

2Connect an Apple USB cable (not supplied) to:

•the USBsocket on the back of AD7050W.

•the dock connector on your iPod/ iPhone/iPad.

E n g l i s h

EN 7