Philips 65HFL7111T User Manual

User Manual

65HFL7111T

1 TV Tour 3

1.1 Ambilight 3

1.2 Bluetooth Connection 3

2 Setting Up 4

2.1 Read Safety 4

2.2 TV Stand and Wall Mounting 4

2.3 Tips on Placement 4

2.4 Power Cable 4

2.5 Antenna Cable 4

3 Connect your Android TV 6

3.1 Network and Internet 6

4 Connect Devices 10

4.1 About Connections 10

4.2 CAM with Smart Card - CI+ 12

4.3 Receiver - Set-Top Box 13

4.4 Home Theatre System - HTS 13

4.5 Smartphones and Tablets 15

4.6 Blu-ray Disc Player 15

4.7 DVD Player 15

4.8 Headphones 15

4.9 USB Flash Drive 16

4.10 Photo Camera 16

4.11 Camcorder 16

4.12 Computer 16

5 Switching On and Off 18

5.1 On, Standby or Off 18

5.2 Word mark brightness 18

5.3 Keys on TV 18

6 Remote Control 19

6.1 Key overview 19

6.2 IR Sensor 20

6.3 Batteries 20

6.4 Cleaning 20

7 Channels 21

7.1 Watching TV channels 21

7.2 Text / Teletext 22

7.3 Interactive TV 23

8 TV Guide 25

8.1 What You Need 25

8.2 Using the TV Guide 25

9 Home Menu 26

9.1 About the Home Menu 26

9.2 Open the Home Menu 26

10 Sources 27

10.1 Switch to a device 27

10.2 Options for a TV Input 27

10.3 Device Name and Type 27

10.4 Game or Computer 27

10.5 Rescan Connections 28

11 Apps 29

11.1 About Apps 29

11.2 Start or Stop an App 29

12 Internet 30

12.1 Start Internet 30

12.2 Options on Internet 30

13 Videos, Photos and Music 31

13.1 From a USB Connection 31

13.2 Play your Videos 31

13.3 View your Photos 31

13.4 Play your Music 32

14 Smartphones and Tablets 33

14.1 Miracast 33

15 Ambilight 35

15.1 Ambilight Style 35

15.2 Ambilight Off 35

16 Settings 37

16.1 Picture 37

16.2 Sound 41

16.3 Ambilight Settings 44

16.4 Eco Settings 45

16.5 General Settings 46

16.6 Clock, Region and Language 47

16.7 Universal Access 50

17 Channel Installation 52

17.1 Antenna/Cable Installation 52

18 Software 54

18.1 Update Software 54

18.2 Open Source Software 54

18.3 Open Source License Statement 54

18.4 Open Source License 54

19 Specifications 88

19.1 Environmental 88

19.2 Power 88

19.3 Operating System 89

19.4 Reception 89

19.5 Display Type 89

19.6 Display Input Resolution 89

19.7 Dimensions and Weights 89

19.8 Connectivity 89

19.9 Sound 89

19.10 Multimedia 89

20 Help and Support 91

20.1 Register your TV 91

20.2 Troubleshooting 91

20.3 Online Help 92

20.4 Support and Repair 93

21 Safety and Care 94

21.1 Safety 94

21.2 Screen Care 95

22 Terms of Use 96

22.1 Terms of Use - TV 96

22.2 Terms of Use - Smart TV 96

23 Copyrights 97

23.1 HDMI 97

23.2 Dolby Audio 97

23.3 DTS Premium Sound 97

23.4 Microsoft 97

23.5 Wi-Fi Alliance 97

23.6 Kensington 97

23.7 Other Trademarks 97

Index 99

TV Tour

1.1

Ambilight

Ambilight is the most elegant and exclusive feature

of your new Philips TV. A subtle glow of coloured light that shines from

behind the screen - expanding your visual experience. With Ambilight your eyes relax but your mind is fully taken up by what you see.

With Ambilight+hue you even expand Ambilight further. Bringing in the wireless controlled bulbs of Philips Hue*. All of them setup to fill your room with colours that fit what's on TV.

You will miss Ambilight when you switch it off. * Separately available.

1.2

Bluetooth Connection

Your TV has Bluetooth technology inside. You can connect extra wireless speakers or a wireless

headphone. Forget connecting cables, pairing your device with the TV is enough.

Setting Up

2.1

Read Safety

Read the safety instructions first before you use the TV.

according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.

2.3

Tips on Placement

2.2

TV Stand and Wall Mounting

TV Stand

You can find the instructions for mounting the TV stand in the Quick Start Guide. The Quick Start Guide can be downloaded from www.philips.com.

Use the product type number of the TV to look for the Quick Start Guide to download.

Wall Mounting

Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . .

• Position the TV where light does not shine directly on the screen.

• Position the TV up to 15 cm away from the wall.

• The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen.

2.4

Power Cable

• Insert the power cable into the POWER connector on the back of the TV.

• Make sure the power cable is securely inserted in the connector.

• Make sure that the power plug, in the wall socket, is accessible at all times.

• When you unplug the power cable, always pull the plug, never pull the cable.

• 65HFL7111T

VESA MIS-F 400x300, M6

Preparation

First remove the 4 plastic screw caps out of the threaded bushes on the back of the TV. Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.

Caution

Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards

Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.

2.5

Antenna Cable

Insert the antenna plug firmly into the Antenna socket at the back of the TV.

You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.

Use this antenna connection for DVB-T and DVB-C input signals.

Connect your Android TV

3.1

Network and Internet

Installation manual)

Step 3 - Select Wireless and Networks > Connect to network and press OK. Step 4 - Select Connect to network and press OK. Step 5 - Select Wireless and press OK.

Home Network

To enjoy the full capabilities of your Philips Android TV, your TV must be connected to the Internet.

Connect the TV to a home network with a high-speed Internet connection. You can connect your TV wirelessly or wired to your network router.

Connect to Network

Wireless Connection

What you need

To connect the TV to the Internet wirelessly, you need a Wi-Fi router with a connection to the Internet.

Use a high-speed (broadband) connection to the Internet.

WPS

If your router has WPS, you can directly connect to the router without scanning for networks. Go to the router, press the WPS button and return to the TV within 2 minutes. Then press Connect to make the connection.

If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.

3 - Select Network type > WPS then press OK. 4 - Go to the router, press the WPS button and return

to the TV within 2 minutes.

5 - Select Connect to make the connection. 6 - A message will be shown when the connection is

successful.

Make the Connection

Wireless

Follow steps 1 to 5. Step 1 - Make sure that the router of your wireless

network is switched on. Step 2 - Consumer Mode: On  Press  HOME and select Features and press OK. Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to

WPS with PIN Code

If your router has WPS with a PIN code, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.

1 - Consumer Mode: On  Press  HOME and select Features and press OK. Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual) 2 - Select Wireless and Networks > Settings and press OK. 3 - Select Network type > WPS with PIN code and press OK. 4 - Write down the 8-digit PIN code shown on screen and enter it in the router software on your PC. Consult the router manual on where to enter the PIN

code in the router software.

5 - Select Connect to make the connection. 6 - A message will be shown when the connection is

successful.

Problems Wireless network not found or distorted

• Microwave ovens, DECT phones or other Wi-Fi

802.11b/g/n devices in your proximity might disturb the wireless network.

• Make sure that the firewalls in your network allow access to the TV's wireless connection.

• If the wireless network does not work properly in your home, try the wired network installation.

Internet does not work

• If the connection to the router is OK, check the router connection to the Internet.

The PC and Internet connection are slow

• Look in your wireless router's user manual for information on indoor range, transfer rate and other factors of signal quality.

• Use a high-speed (broadband) Internet connection for your router.

DHCP

• If the connection fails, you can check the DHCP (Dynamic Host Configuration Protocol) setting of the router. DHCP should be switched on.

Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual)

4 - Select Wireless and Networks > Connect to network and press OK.

5 - Select Wired then press OK. 6 - The TV constantly searches for the network

connection. A message will be shown when the connection is successful.

Network configuration

If the connection fails, you can check the DHCP setting of the router. DHCP should be switched on. Alternatively, if you are an advanced user and want to install your network with static IP addressing, set the TV to Static IP. To set the TV to Static IP:

Consumer Mode: On  Press  HOME and select Features and press OK. Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual)

Select Wireless and Networks > Settings > Network configuration > Static IP. With Static IP selected in the menu, you can set the IP address and other necessary settings in Static IP configuration in the same menu.

Wired Connection

What You Need

To connect the TV to the Internet, you need a network router with a connection to the Internet. Use a high-speed (broadband) connection to the Internet.

Make the Connection

To make a wired connection… 1 - Connect the router to the TV with a network cable

(Ethernet cable**).

2 - Make sure that the router is switched on. 3 - Consumer Mode: On  Press  HOME and

select Features and press OK.

**To fulfill EMC regulations, use a shielded FTP Cat. 5E Ethernet cable.

Network Settings

View Network Settings

You can view all current network settings here. The IP and MAC address, signal strength, speed, encryption method, etc.

To view the current network settings… 1 - Consumer Mode: On  Press  HOME and

select Features and press OK. Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual)

2 - Select Wireless and Networks and press OK. 3 - Select Settings > View Network Settings and

press OK. 4 - Press  BACK repeatedly if necessary, to close the menu.

Network Configuration

If you are an advanced user and want to install your network with Static IP addressing, set the TV to Static IP.

4 - Select On to enable Wake on Wi-Fi (WoWLAN) .

5 - Press  BACK repeatedly if necessary, to close the menu.

To set the TV to Static IP… 1 - Consumer Mode: On  Press  HOME and

select Features and press OK. Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual)

2 - Select Wireless and Networks and press OK. 3 - Select Settings > Network Configuration and

press OK.

4 - Select Static IP and press OK to enable Static IP Configuration.

5 - Press  BACK to go back to previous level. 6 - Select Static IP Configuration and configure the

connection.

7 - You can set the number for IP Address, Netmask, Gateway, DNS 1, or DNS 2.

8 - Press  BACK repeatedly if necessary, to close the menu.

Switch On with LAN (WoL)

To switch on WoL… 1 - Consumer Mode: On  Press  HOME and

select Features and press OK. Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual)

2 - Select Wireless and Networks and press OK. 3 - Select Settings > Wake on LAN (WoL) and

press OK.

4 - Select On to enable Wake on LAN (WoL). 5 - Press  BACK repeatedly if necessary, to close

the menu.

Switch On with Wi-Fi (WoWLAN)

Switch on Wi-Fi connection

You can switch on or off Wi-Fi connection on your TV.

To switch on Wi-Fi… 1 - Consumer Mode: On  Press  HOME and

select Features and press OK. Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual)

2 - Select Wireless and Networks and press OK. 3 - Select Connect to Network and press OK. 4 - Select Connect and press OK. 5 - Select Wireless and press OK. 6 - Press  BACK repeatedly if necessary, to close

the menu.

Digital Media Renderer - DMR

If your media files do not play on your TV, make sure that the Digitial Media Renderer is switched on. As a factory setting, DMR is switched on.

To switch on DMR… 1 - Consumer Mode: On  Press  HOME and

select Features and press OK. Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual)

2 - Select Wireless and Networks and press OK. 3 - Select Features > PTA and press OK. 4 - Select Digital Media Renderer - DMR and

press OK.

5 - Select On and press OK. 6 - Press  BACK repeatedly if necessary, to close

the menu.

You can switch this TV on from your smartphone or tablet if the TV is in Standby. The setting Wake On Wi-Fi (WoWLAN) must be switched on.

To switch on WoWLAN… 1 - Consumer Mode: On  Press  HOME and

select Features and press OK. Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual)

2 - Select Wireless and Networks and press OK. 3 - Select Settings > Wake on

Wi-Fi (WoWLAN) and press OK.

Switch on Wi-Fi Miracast

Switch on Wi-Fi Miracast to share the screen of your smartphone, tablet or computer on the TV.

To switch on Miracast… 1 - Consumer Mode: On  Press  HOME and

select Features and press OK. Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual)

2 - Select Wireless and Networks > Miracast and press OK. 3 - Select Features > Wi-Fi Miracast and press OK.

4 - Select Enable and press OK. 5 - Select Yes and press OK. 6 - Press  BACK repeatedly if necessary, to close

the menu.

Clear Wi-Fi Miracast connection

Clear the list of connected and blocked devices that are used with Miracast.

To clear Miracast connections… 1 - Consumer Mode: On  Press  HOME and

select Features and press OK. Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual)

2 - Select Wireless and Networks and press OK. 3 - Select Features > Wi-Fi Miracast and

press OK. 4 - Select Wi-Fi Miracast Connections > Clear All and press OK. 5 - Press  BACK repeatedly if necessary, to close the menu.

HDMI ARC

Connect Devices

4.1

About Connections

Connectivity Guide

Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.

When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu.

Antenna port

If you have a Set-top box (a digital receiver) or Recorder, connect the antenna cables to run the antenna signal through the Set-top box and/or Recorder first before it enters the TV. In this way, the antenna and the Set-top box can send possible additional channels to the Recorder to record.

All of the HDMI connections on the TV have HDMI ARC (Audio Return Channel).

If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to any of the HDMI connections on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals.

You can use any HDMI connection on this TV to connect the HTS but ARC is only available for 1 device/connection at a time.

HDMI CEC - EasyLink

EasyLink

An HDMI connection has the best picture and sound quality. One HDMI cable combines video and audio signals. Use an HDMI cable for High Definition (HD) TV signals. For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m.

HDMI ports

HDMI Quality

An HDMI connection has the best picture and sound quality. One HDMI cable combines video and audio signals. Use an HDMI cable for TV signal.

For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m.

Copy protection

HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Bluray Disc. Also referred to as DRM (Digital Rights Management).

EasyLink HDMI CEC

If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device.

With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC (Consumer Electronics Control) to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection.

EasyLink setup

The TV comes with EasyLink switched on. Make sure that all HDMI CEC settings are properly set up on the connected EasyLink devices. EasyLink might not work with devices from other brands.

HDMI CEC on other brands

The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and

Viera Link. Not all brands are fully compatible with EasyLink.

Example HDMI CEC branding names are property of their respective owners.

Operate Devices

To operate a device connected to HDMI and set up with EasyLink, select the device or its activity in the list of TV connections. Press SOURCES , select a device connected to an HDMI connection and press OK.

On  Press  HOME and select Features and press OK. Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual) 2 - Select Sources > Advanced > EasyLink, and press OK .

3 - Select EasyLink Remote Control and press OK . 4 - Select On or Off and press OK. 5 - Press  BACK, repeatedly if necessary, to close

the menu.

Once the device is selected, the TV remote control can control the device. However the keys  HOME and  OPTIONS and some other TV keys, are not forwarded to the device.

If the key you need is not on the TV remote control, you can select the key in the Options menu. Press  OPTIONS and select Controls in the menu bar. On the screen, select the device key you need and press OK. Some very specific device keys might not be available in the Controls menu.

Only devices that support EasyLink Remote Control function will respond to the TV remote control.

EasyLink On or Off

You can switch EasyLink on or off. The TV comes with the EasyLink settings switched on.

To switch off EasyLink completely… 1 - Consumer Mode:

3 - Select EasyLink , and press OK. 4 - Select Off and press OK. 5 - Press  BACK, repeatedly if necessary, to close

the menu.

DVI to HDMI

If you still own a device that only has a DVI connection, you can connect the device to any of the HDMI connection with a DVI to HDMI adapter.

Use a DVI to HDMI adapter if your device only has a DVI connection. Use one of the HDMI connections and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.

Copy protection

DVI and HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu-ray Disc. Also referred to as DRM (Digital Rights Management).

Y Pb Pr - Component

Y Pb Pr - Component Video is a high quality connection.

EasyLink Remote Control

If you want devices to communicate but you don't want to operate them with the TV remote control, you can switch off EasyLink Remote Control separately.

To switch EasyLink Remote Control on or off… 1 - Consumer Mode:

The YPbPr connection can be used for High Definition (HD) TV signals. Next to the Y, Pb and Pr signals add the Audio Left and Right signals for sound.

Match the YPbPr (green, blue, red) connector colours with the cable plugs when you connect. Use an Audio L/R cinch cable if your device also has sound.

Scart

SCART is a good quality connection. The SCART connection can be used for CVBS and

RGB video signals but cannot be used for High Definition (HD) TV signals. The SCART connection combines video and audio signals. The SCART connection also supports NTSC playback.

4.2

CAM with Smart Card - CI+

CI+

This TV is ready for the CI+ Conditional Access. With CI+ you can watch premium HD programmes,

like movies and sports, offered by digital TV operators in your region. These programmes are scrambled by the TV operator and descrambled with a prepaid CI+ module. Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes. These programmes have a high level of copy protection.

Contact a digital TV operator for more information on terms & conditions.

Audio Out - Optical

Audio Out - Optical is a high quality sound connection.

This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In - Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS.

You can set the type of the audio out signal to fit the audio capabilities of your Home Theatre System.

If the sound does not match the video on screen, you can adjust the audio to video synchronisation.

Smart Card

Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes.

Insert the smart card into the CAM module. See the instruction you received from the operator.

To insert the CAM in the TV… 1 - Look on the CAM for the correct method of

insertion. Incorrect insertion can damage the CAM and TV. 2 - While looking at the back of the TV, with the front of the CAM facing towards you, gently insert the CAM into the slot COMMON INTERFACE. 3 - Push the CAM in as far as it will go. Leave it in the slot permanently.

When you switch on the TV, it may take a few minutes before the CAM is activated. If a CAM is inserted and subscription fees are paid (subscription methods can differ), you can watch the scrambled channels supported by the CAM smart card.

The CAM and smart card are exclusively for your TV. If you remove the CAM, you will no longer be able to watch the scrambled channels supported by the CAM.

Passwords and PIN codes

For some CAMs, you must enter a PIN code to watch its channels. When you set the PIN code for the CAM, we recommend you to use the same code you are using to unlock the TV.

To set the PIN code for the CAM…

1 - Press SOURCES . 2 - Select the channel type you are using the CAM

for.

3 - Press  OPTIONS and select Common Interface.

4 - Select the TV operator of the CAM. The following screens come from the TV operator. Follow the onscreen instruction to look up the PIN code setting.

4.4

Home Theatre System - HTS

Connect with HDMI ARC

Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player.

HDMI ARC

If your Home Theatre System has an HDMI ARC connection, you can use any HDMI connection on the TV to connect. With HDMI ARC, you do not need to connect the extra audio cable. The HDMI ARC connection combines both signals. All HDMI connections on the TV can offer the Audio Return Channel (ARC) signal. But once you have connected the Home Theatre System, the TV can only send the ARC signal to this HDMI connection.

4.3

Receiver - Set-Top Box

Cable Box

Use 2 antenna cables to connect the antenna to the Set-top box (a digital receiver) and the TV.

Next to the antenna connections, add an HDMI cable to connect the Set-top box to the TV. Alternatively, you can use a SCART cable if the Settop box has no HDMI connection.

Audio to video synchronisation (sync)

If the sound does not match the video on screen, you can set a delay on most Home Theatre Systems with a disc player to match the sound with the video.

Connect with HDMI

Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player.

If the Home Theatre System has no HDMI ARC connection, add an optical audio cable (Toslink) to send the sound of the TV picture to the Home Theatre System.

Audio to video synchronisation (sync)

If the sound does not match the video on screen, you can set a delay on most Home Theatre Systems with a disc player to match the sound with the video.

Audio Out Settings

Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual)

2 - Select Sound > Advanced > Audio out offset. 3 - Use the slider bar to set the sound offset and

press OK. 4 - Press  BACK, repeatedly if necessary, to close the menu.

Audio Out Delay

With a Home Theatre System (HTS) connected to the TV, the picture on TV and the sound from the HTS should be synchronised.

Automatic audio to video sync

With recent Philips Home Theatre Systems, the audio to video sync is done automatically and always correct.

Audio sync delay

For some Home Theatre Systems you might need to adjust the audio sync delay to synchronise the audio to the video. On the HTS, increase the delay value until there is a match between picture and sound. A delay value of 180ms may be required. Read the user manual of the HTS. With a delay value set up on the HTS, you need to switch off Audio Out Delay on the TV.

To switch off the Audio Out delay . . . 1 - Consumer Mode:

On  Press  HOME and select Features and press OK. Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual)

2 - Select Sound > Advanced > Audio out delay. 3 - Select Off and press OK. 4 - Press  BACK, repeatedly if necessary, to close

the menu.

Audio Out Format

If you have a Home Theatre System (HTS) with multichannel sound processing capabilities like Dolby Digital, DTS® or similar, set the Audio Out Format to Multichannel. With Multichannel, the TV can send the compressed multichannel sound signal from a TV channel or connected player to the Home Theatre System. If you have a Home Theatre System without multichannel sound processing, select Stereo.

To set Audio Out Format… 1 - Consumer Mode:

On  Press  HOME and select Features and press OK. Guest Mode: On  Guest Menu: Not available in this mode. (For professional mode information, please refer to Installation manual)

2 - Select Sound > Advanced > Audio out format. 3 - Select Multichannel or Stereo. 4 - Press  BACK, repeatedly if necessary, to close

the menu.

Audio Out Levelling

Use the Audio Out Levelling setting to level the volume (loudness) of the TV and the Home Theatre System when you switch over from one to another. Volume differences can be caused by differences in sound processing.

To level the difference in volume…

Audio Out Offset

If you cannot set a delay on the Home Theatre System, you can set the TV to sync the sound. You can set an offset that compensates for the time necessary for the Home Theatre System to process the sound of the TV picture. You can set the value in steps of 5ms. Maximum setting is -60ms.

The Audio Out Delay setting should be switched on. To synchronise the sound on the TV… 1 - Consumer Mode:

On  Press  HOME and select Features and press OK.

2 - Select Sound > Advanced > Audio out levelling.

3 - If the volume difference is large, select More. If the volume difference is small, select Less. 4 - Press  BACK, repeatedly if necessary, to close the menu.

Audio Out Levelling affects both the Audio Out Optical and HDMI ARC sound signals.

Problems with HTS sound

Sound with loud noise

If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted. This noise is heard when the audio or video file has DTS sound but the Home Theatre System has no DTS sound processing. You can fix this by setting the Audio Out Format of the TV to Stereo (uncompressed).

2 - Select Sound > Advanced > Audio out format. No sound

If you cannot hear the sound from the TV on your Home Theatre System, check if you connected the HDMI cable to an HDMI ARC connection on the Home Theatre System. All HDMI connections on the TV are HDMI ARC connections.

4.6

Blu-ray Disc Player

Use a High speed HDMI cable to connect the Bluray Disc player to the TV.

If the Blu-ray Disc player has EasyLink HDMI CEC, you can operate the player with the TV remote control.

4.7

DVD Player

• Check if you connected the HDMI cable to an HDMI ARC connection on the Home Theatre System. All

HDMI connections on the TV are HDMI ARC connections.

• Check if the HDMI ARC setting on the TV is switched On. 1 - Consumer Mode: On  Press  HOME and select Features and press OK. Guest Mode: On  Guest Menu: Press  HOME and select Features and press OK. (For professional mode information, please refer to Installation manual) 2 - Select Sound > Advanced > HDMI ARC.

4.5

Smartphones and Tablets

To connect a smartphone or tablet to the TV, you can use a wireless connection.

Use an HDMI cable to connect the DVD player to the TV. Alternatively, you can use a SCART cable, if the device has no HDMI connection.

If the DVD player is connected with HDMI and has EasyLink CEC, you can operate the player with the TV remote control.

4.8

Headphones

Wireless

For a wireless connection, on your smartphone or tablet download the Philips TV Remote App from your favourite app store.

Note: Philips TV Remote App can only be used by making connection to TV. Use function in Features to make the connection.

You can connect a set of headphones to the  connection on the back of the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately.

4.9

USB Flash Drive

You can view photos or play your music and videos from a connected USB flash drive.

Insert a USB flash drive in one of the USB connections on the TV while the TV is switched on.

4.11

Camcorder

HDMI

For best quality, use an HDMI cable to connect the camcorder to the TV.

Audio Video LR / Scart

You can use an HDMI, YPbPr or SCART connection to connect your camcorder. If your camcorder only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to SCART adapter (sold separately) to connect to the SCART connection.

The TV detects the flash drive and opens a list showing its content. If the contents list does not appear automatically, press SOURCES and select USB.

To stop watching the USB flash drive content, press TV or select another activity. To disconnect the USB flash drive, you can pull out the flash drive anytime.

4.10

Photo Camera

To view photos stored on your digital photo camera, you can connect the camera directly to the TV.

Use one of the USB connections on the TV to connect. Switch on the camera after you made the connection.

If the contents list does not appear automatically, press SOURCES , and select USB. Your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera.

4.12

Computer

Connect

You can connect your computer to the TV and use the TV as a PC monitor.

With HDMI

Use an HDMI cable to connect the computer to the TV.

With DVI to HDMI

Alternatively, you can use a DVI to HDMI adapter (sold separately) to connect the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to AUDIO IN L/R on the back of the TV.

Switching On and Off

2 - Select Eco Settings > Philips Wordmark and press OK. 3 - Select Maximum, Medium, Minimum or select Off to switch off the lighting of the word mark. 4 - Press  BACK, repeatedly if necessary, to close the menu.

5.1

On, Standby or Off

Make sure the TV is connected to the mains AC power. Connect the supplied power cord to the AC in connector at the back of the TV. The indicator light at the bottom of the TV lights up.

Switch on

Press  on the remote control to switch the TV on. Alternatively, press  HOME. You can also press the small joystick key on the back of the TV to switch the TV on in case you can't find the remote control or its batteries are empty.

Switch to standby

To switch the TV to standby, press  on the remote control. You can also press the small joystick key on the back of the TV.

In standby mode, the TV is still connected to the mains power but consumes very little energy.

To switch off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.

*Only available for certain TV models

5.3

Keys on TV

If you lost the remote control or its batteries are empty, you can still do some basic TV operations.

To open the basic menu… 1 - With the TV switched on, press the joystick key on

the back of the TV to bring up the basic menu. 2 - Press left or right to select  Volume,  Channel or  Sources. 3 - Press up or down to adjust the volume or tune to the next or previous channel. Press up or down to go through the list of sources, including the tuner selection. 4 - The menu will disappear automatically.

To switch the TV on standby, select  and press the joystick key.

5.2

Word mark brightness

You can switch off or adjust the brightness of the Philips logo on the front of the TV.

To adjust or switch off… 1 - Consumer Mode:

On  Press  HOME and select Features and press OK. Guest Mode: On  Guest Menu: Press  HOME and select Features and press OK. (For professional mode information, please refer to Installation manual)

Remote Control

6.1

Key overview

Top

1 -  SMART INFO

To open the smart information page.

2 -     Colour keys Direct selection of options. Blue key , opens Help.

1 -  Standby / On To switch the TV on or back to Standby.

2 -  ALARM To set the alarm.

3 -  PICTURE STYLE To select one of the picture style.

4 -  LIST To open the channel list.

5 - SOURCES To open or close the Sources menu.

6 -  SLEEP To open the Sleep Timer list.

7 -  SOUND STYLE To select one of the sound style.

8 -  MY CHOICE To switch on mychoice.

9 -  TV GUIDE To open or close the TV Guide.

10 -  SETTINGS To open the Frequent Settings menu and All Settings.

3 -  INFO To open or close programme info.

4 -  BACK To switch back to the previous channel you selected. To close a menu without changing a setting. To go back to the previous App/Internet page.

5 - TV To switch back to watching TV. To leave an interactive TV application.

6 -  APPS To open the App gallery.

7 -  OPTIONS To open or close the Options menu.

8 - OK key To confirm a selection or setting.

9 - Arrow / navigation keys To navigate up, down, left or right.

10 -  HOME To open the Home menu.

Bottom

Middle

the arrow. 2 - Replace the old batteries with 2 type AAA-R03-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly. 3 - Reposition the battery door and slide it back until it clicks.

Remove the batteries if you are not using the remote control for a long time. Safely dispose of your old batteries according to the end of use directions.

6.4

Cleaning

1 -  Volume

To adjust the volume level. 2 - Number keys

To select a channel directly. 3 - SUBTITLE

To switch Subtitles on, off or on during mute. 4 -  CLOCK

To display the clock. 5 -  Channel

To switch to the next or previous channel in the channel list. To open the next or previous page in Text/Teletext. To start the next or previous chapter on a disc.

6 -  Mute To mute the sound or to restore it.

7 - TEXT To open or close Text/Teletext.

6.2

Your remote control is treated with a scratch-resistant coating.

To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control.

IR Sensor

The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.

6.3

Batteries

If the TV does not react on a key press on the remote control, the batteries might be empty.

To replace the batteries, open the battery compartment on the back of the remote control.

1 - Slide the battery door in the direction shown by

Channels

7.1

Watching TV channels

Guest Menu. (For professional mode information, please refer to Installation manual)

2 - Select Channels > Channel settings > Enable Channel logos and press OK.

3 - Select No and press OK. 4 - Press  BACK, repeatedly if necessary, to close

the menu.

Switch channels

To watch TV channels, press TV. The TV tunes to the TV channel you last watched.

Alternatively, press  HOME to open the Home menu and press  to select the desired channel.

To switch channels, press   or  . If you know the channel number, type in the number with the number keys. Press OK after you entered the number to switch channels.

To switch back to the previously tuned channel, press

 BACK. To switch to a channel from a channel list

While watching a TV channel, press  LIST to open the channel grid.

The channel grid can have several pages with channels. To view the next or previous page, press   or  . To close the channel lists without switching channels, press  LIST again.

Radio channels

If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel just like you switch to a TV channel.

Options for channels

While watching a channel, depending on the type of channel (analogue or digital) you are watching or depending on the TV settings you made, some options are available.

Open the options menu While watching a channel, press OPTIONS.

Universal access

With Universal access switched on, you can set some options for hearing impaired and visually impaired people.

Video selection

Digital TV channels can offer multi video signals (multifeed broadcast), different camera viewpoints or angles of the same event or different programmes on one TV channel. The TV shows a message if any such TV channels are available.

Subtitles

Channel list

Channel list views

In the channel lists, you can find all installed TV and radio channels.

Next to the channel list All, which holds all installed channels where you can view the installed Radio stations separately or discover the newly added channels in New.

Channel logos

In some countries, the TV can show the channel logos. If you do not want these logos to appear, you can switch them off. To switch off Channel logos . . .

1 - Consumer Mode: On  Press  HOME and select Features and press OK. Guest Mode: On  Guest Menu: Not available in

Switch Subtitles on or Subtitles off with this options. Select Automatic to show subtitles only when the sound is muted with .

Subtitle language

For digital broadcast, you can select an available subtitle language temporarily if none of your preferred languages are available.

Audio languages

For digital broadcast, you can select an available audio language temporarily if none of your preferred languages are available.

Dual I-II

If an audio signal contains two audio languages but one language — or both — has no language indication, this option is available.

Common interface

If prepaid premium content is available from a CAM, you can set the provider settings with this option.

HbbTV on this channel

You can block the HbbTV pages from a channel that offers HbbTV.

Status

Select Status to view technical information on the channel (if it is analogue or digital) or a connected device you are watching.

Enables the user to communicate his activity with his social networks (such as Twitter or email).

*For Smart TVs only.

1 - Enter the page number with the number keys. 2 - Use the arrow keys to navigate. 3 - Press a colour key to select a colour-coded

subject at the bottom of the screen.

Text sub-pages

A Text page number can hold several subpages. The subpage numbers are shown on a bar next to the main page number. To select a subpage, press  or .

T.O.P. Text pages

Some broadcasters offer T.O.P. Text. To open T.O.P. Text pages within Text, press  OPTIONS and select T.O.P. overview.

Favourite pages

Picture format

If black bars appear on top and bottom or on both sides of the picture, you can adjust the picture format to a format that fills the screen.

To change the picture format . . . 1 - Consumer Mode:

2 - Select Picture > Picture Format and press OK. 3 - Select a format from the list and press OK. 4 - Press  BACK, repeatedly if necessary, to close

the menu. The following format can be available according the

picture on screen . . .

• Fill screen

• Fit to screen

• Super zoom

• Movie expand 16:9

• Wide screen

• Unscaled

• 4:3

7.2

Text / Teletext

Text Pages

To open Text/Teletext press TEXT, while you are watching TV channels. To close Text, press TEXT again.

The TV makes a list of the last 10 Text pages you opened. You can easily reopen them again in the Favourite Text pages column.

1 - In Text, select the star in the top left corner of the screen to show the column of favourite pages. 2 - Press  (down) or  (up) to select a page number and press OK to open the page. You can clear the list with the option Clear favourite

pages. Search Text

You can select a word and scan Text for all occurences of this word.

1 - Open a Text page and press OK. 2 - Select a word or number with the arrow keys. 3 - Press OK again to jump immediately to the next

occurence of this word or number. 4 - Press OK again to jump to the subsequent occurence. 5 - To stop searching, press  (up) until nothing is selected.

Text from a connected device

Some devices that receive TV channels can also offer Text. To open Text from a connected device . . .

1 - Press SOURCES, select the device and press OK. 2 - While watching a channel on the device, press  OPTIONS , select Show device keys and select the  key and press OK.

3 - Press  BACK to hide the device keys. 4 - To close Text, press  BACK again.

Digital Text (UK only)

Some digital broadcasters offer dedicated Digital Text or interactive TV on their digital TV channels. This includes normal Text using the number, colour and arrow keys to select and navigate.

Select a Text page

To select a page . . .

To close Digital Text, press  BACK.

Text Options

the menu.

In Text/Teletext, press  OPTIONS to select the following…

• Freeze page To stop the automatic rotation of subpages.

• Dual screen / Full screen To show the TV channel and Text alongside each other.

• T.O.P. overview To open T.O.P. Text.

• Enlarge To enlarge the Text page for comfortable reading.

• Reveal To unhide hidden information on a page.

• Cycle subpages To cycle subpages when these are available.

• Language To switch the group of characters that Text uses to display correctly.

• Text 2.5 To activate the Text 2.5 for more colours and better graphics.

7.3

Interactive TV

About iTV

With interactive TV, some digital broadcasters combine their normal TV programme with information or entertainment pages. On some pages, you can respond to a programme or vote, do online shopping or pay for a video-on-demand programme.

HbbTV, MHEG, . . .

Broadcasters use various interactive TV systems : HbbTV (Hybrid Broadcast Broadband TV) or iTV (Interactive TV - MHEG). Interactive TV is sometimes referred to as Digital Text or Red button. But each system is distinct.

Visit the broadcaster's Internet website for more information.

Text Setup

Text language

Some digital TV broadcasters have several Text languages available. To set your primary and secondary Text language . . .

2 - Select Region and Language and press OK. 3 - Select Languages > Primary

Text or Secondary Text and press OK.

4 - Select your preferred Text languages. 5 - Press  BACK repeatedly if necessary, to close

the menu.

Text 2.5

If available, Text 2.5 offers more colours and better graphics. Text 2.5 is activated as a standard factory setting. To switch off Text 2.5…

1 - Press TEXT. 2 - With Text/Teletext open on screen,

press  OPTIONS.

3 - Select Text 2.5 > Off. 4 - Press  (left) repeatedly if necessary, to close

What You Need

Interactive TV is only available on digital TV channels. To enjoy the full benefits of Interactive TV, you need a high-speed (broadband) Internet connection to the TV.

HbbTV

If a TV channel offers HbbTV pages, you must first switch on HbbTV in the TV settings to view the pages.

2 - Select Channels > Channel settings > Enable Hbb TV and press OK.

3 - Select Yes. 4 - Press  BACK repeatedly if necessary, to close

the menu. If you want to avoid access to HbbTV pages on a

specific channel, you can block the HbbTV pages for this channel only.

1 - Tune to the channel of which you want to block the HbbTV pages.

2 - Press  OPTIONS and select HbbTV on This Channel. 3 - Select Off.

Use iTV

Open iTV pages

Most channels that offer HbbTV or iTV invite you to press the colour key  (red) or OK key to open their interactive programme.

Navigate iTV pages

You can use the arrow and colour keys, the number keys and the  BACK key to navigate the iTV pages.

Digital Text (UK only)

To open Digital Text, press TEXT. To close, press  BACK.

Close iTV pages

Most iTV pages inform you which key to use to close. To force an iTV page to close, switch to the next TV channel and press .

Search by Genre

TV Guide

8.1

What You Need

With the TV Guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown. Not all channels offer TV Guide information.

The TV can collect TV Guide information for the channels that are installed on the TV. The TV cannot collect the TV Guide information for channels viewed from a digital receiver or decoder.

8.2

Using the TV Guide

Open the TV Guide

If the information is available, you can look up scheduled programmes by genre like movies, sports, etc.

To search for programmes by genre…

1 - Press  TV GUIDE. 2 - Press  OPTIONS. 3 - Select Search by Genre and press OK. 4 - Select the genre you want and press OK. A list

with the found programmes appears. 5 - You can set reminders or schedule a recording on a selected programme. 6 - Press  BACK, repeatedly if necessary, to close the menu.

To open the TV Guide, press  TV GUIDE. The TV Guide shows the channels of the selected tuner.

Press  TV GUIDE again to close. The first time you open the TV Guide, the TV scans all

TV channels for programme information. This may take several minutes. TV Guide data is stored on TV.

Tune to a Programme

From the TV Guide, you can tune to a current programme.

To switch to the programme (channel), select the programme and press OK.

View programme details

To call up the details of the selected programme…

1 - Press  INFO. 2 - Press  BACK to close.

Change Day

The TV Guide can show the scheduled programmes for the upcoming days (maximum up to 8 days).

Press the colour key  Day and select the day you need.

Home Menu

9.1

About the Home Menu

To enjoy the benefits of your Android TV, connect the TV to the Internet.

Like on your Android smartphone or tablet, the Home menu is the centre of your TV. From the Home menu you can start any application, switch to a TV channel, open a website or switch to a connected device. Depending on your TV setup and your country the Home menu can contain different items.

The Home menu is organised in rows…



The first row shows a selection of channels. Select the channel that you want to watch.

 Smart Info

This row allows user to customise the hotel information on TV.

 Apps

The row of Apps contain all Apps that come with the TV. In this row you will also find the Apps for TV, like Watch TV, Sources, Media and others. Apps you started recently will appear in front of the row.

Features

From this row, you can open a selection of settings.

Language

User can set the language of the TV in this row.

9.2

LIST

Open the Home Menu

To open the Home menu and open an item…

1 - Press  HOME. 2 - Select an item and press OK to open or start it. 3 - Press  BACK, to close the Home menu without

starting anything.

10.3

Sources

10.1

Switch to a device

From the list of Sources, you can switch to any of the connected devices. You can switch to a tuner to watch TV, open the content of a connected USB Flash Drive or see the recordings you made on a connected USB Hard Drive. You can switch to your connected devices to watch their programme, a digital receiver or a Blu-ray Disc player.

To switch to a connected device…

1 - Press SOURCES to open the Sources menu. 2 - Select one of the item in the source list and

press OK. The TV will show the programme or content of the device.

3 - Press SOURCES again to close the menu. One Touch Play

With the TV in standby, you can switch on a disc player with your TV remote control. To switch on both disc player and TV from standby and start playing the disc immediately, press  (play) on the TV remote control. The device must be connected with an HDMI cable and both TV and device must have HDMI CEC switched on.

10.2

Device Name and Type

When you connect a new device to the TV and the TV detects the device, you can assign an icon that fits the device type. If you connect a device with an HDMI cable and HDMI CEC, the TV detects the device type automatically and the device gets an appropriate icon.

The device type determines picture and sound styles, resolution values, specific settings or the position within the Sources menu. You don't have to worry about the ideal settings.

Rename or Change Type

You can always change the name or change the type of a connected device. Look for the  icon at the right of the device name in the Sources menu. Some TV input sources do not allow a name change.

To change the device type…

1 - Select the device in the Sources menu. 2 - Press  (right) to select the  icon and

press OK.

3 - Press  BACK to hide the onscreen keyboard. 4 - Press  (down) to find all available device

types. Select the type you want and press OK.

5 - If you want to reset the type of the device to the original connector type, select Reset and press OK.

6 - Select Close and press OK to close this menu. To change the device name…

Options for a TV Input

Some TV input devices offer specific settings. To set the options for a specific TV input…

1 - Press SOURCES. 2 - Select the TV input in the list and press OK. 3 - Press  OPTIONS. You can set the options for

the selected TV input here. 4 - Press  OPTIONS again to close the Options menu.

Possible options…

Controls

With this option you can operate the connected device with the TV remote control. The device must be connected with an HDMI cable and both TV and device must have HDMI CEC switched on.

Device Info

Open this option to view information on the connected device.

1 - Select the device in the Sources menu. 2 - Press  (right) to select the  icon and

press OK. 3 - Use the on-screen Keyboard to delete the current name and enter a new one. Press  to confirm.

4 - Press  BACK to hide the onscreen keyboard. 5 - If you want to reset the name of the device to the

original connector name, select Reset and press OK. 6 - Select Close and press OK to close this menu.

10.4

Game or Computer

The device type determines picture and sound styles, resolution values and other specifics. You don't have to worry about the ideal settings.

For some devices the type of the device is not that clear. A game console can have a built-in Blu-ray Disc player and the type is set to Player because it is used as a disc player most of the time. For this kind of devices, you can temporarily switch to the ideal settings for gaming. Or alternatively, switch to the

ideal settings for a connected computer. You can only use the setting Game or

Computer when you switch to a connected device in the Sources menu. The Game or Computer setting is stored for the selected device.

To switch to the ideal settings for gaming or computer manually…

2 - Select Picture > Advanced and press OK. 3 - Select Game or Computer and press OK. 4 - Select Game, Computer or Off. 5 - Press  (left) to go back one step

or press  BACK to close the menu. Remember to set this setting back to Off when you

stop playing the game.

10.5

Rescan Connections

You can rescan all TV connections to update the Sources menu with recently connected devices.

To rescan the connections…

1 - Press SOURCES to open the Sources menu. 2 - Press  (up) to select the  icon at the top

right of the Sources menu. 3 - Press OK to start scanning the connections. Newly connected devices will be added to the Sources menu.

Apps

11.1

About Apps

All the apps can be found by pressing  Apps on your remote control. These TV apps offer entertainments to enrich your hotel stay experience. Apps can also be accessed in Apps section in the Apps menu.

11.2

Start or Stop an App

You can start an app from the Home menu. To start an app… 1 - Consumer Mode:

On  Press  HOME and select Apps and press OK. Guest Mode: On  Guest Menu: Press  HOME and select Apps and press OK. (For professional mode information, please refer to Installation manual)

2 - Select the app you want and press OK. 3 - To stop an app, press  BACK or press TV or

stop the app with its dedicated exit/stop button.

To mark the current page as a favourite.

Internet

12.1

Start Internet

You can browse the Internet on your TV. You can view any Internet website but most of them are not prepared for a TV screen.

• Some plug-ins (e.g. to view pages or videos) are not available on your TV.

• You cannot send or download files.

• Internet pages are shown one page at a time and full screen.

To start the Internet browser… 1 - Consumer Mode:

On  Press  HOME and select Features and press  (right). Guest Mode: On  Guest Menu: Press  HOME and select Features and press  (right). (For professional mode information, please refer to Installation manual)

2 - Select  Internet and press OK. 3 - Enter an Internet address and select ,

press OK.

4 - To close Internet, press  HOME or TV.

Subtitles

To select subtitles if available.

12.2

Options on Internet

Some extras are available for the Internet. To open the extras…

1 - With the website open, press  OPTIONS. 2 - Select one of the items and press OK. 3 - Press  BACK repeatedly if necessary, to close

the menu.

Enter Address

To enter a new Internet address.

Show Favourites

To view the pages you marked as favourites.

Reload Page

To load the Internet page again.

Zoom Page

Use the slider bar to set the zoom percentage.

Security Info

To view the security level of the current page.

Mark as Favourite

+ 72 hidden pages

Philips 65HFL7111T User Manual

Contents