Peugeot 406 C Dag 2002 Owner's Manual

YOUR 406 COUPE AT A GLANCE

01-07-2002

10 -Passenger air bag.

11 - Glove box.

12 -Side adjustable heating/ ven-

tilation vents and air flow regulation.

13 -Window demisting vent.

14 -Speaker (tweeter) location.

15 -Multi-function display.

16 -Heating/ventilation controls.

17 -Radio.

18 - Gear lever.

19 -Front ashtray.

20 -Rear footwell heating vent.

21 -Lighter.

22 -Heated seat switches.

Coin storage. Passenger air bag

disarming switch.

23 -Handbrake.

24 -Cup-holder.

25 -Rear ashtray.

26 -Steering lock and ignition.

27 -Steering wheel adjustment.

28 -Fuse box.

29 -Electronic stability

programme (ASR/ESP)

30 -Headlamp height

adjustment.

31 -Cruise control.

YOUR 406 COUPE AT A GLANCE

1 - Electric mirror controls.

Window controls.

2 - Lights and direction

indicators stalk.

3 - Driver's air bag.

Horn.

4 - Instrument dials.

5 - Radio remote control stalk.

6 - Windscreen wash-wipe stalk.

Trip computer stalk.

7 - Hazard warning lights

switch.

8 - Central adjustable heating/

ventilation vents and air flow regulation.

9 - Windscreen demisting

vents.

01-07-2002

THE KEYS

The keys allow you to switch on the ignition and to independently operate the locks on the front doors, the fuel filler cap, the glove box and the passenger air bag disarming switch.

Central locking

From the front doors, the keys allow you to lock, deadlock or unlock the doors and the boot and to fold back the exterior mirrors.

If one of the front doors or the boot is open, it is impossible to operate the central locking; a bleep indicates locking by remote control.

The remote control performs the same functions at a distance.

The remote control key Locking

Press button A to lock the vehicle. This is confirmed by fixed lighting of the direction indicators for approximately two seconds.

Note: a long press on button A, in addition to locking, automatically closes the windows and the sunroof.

Deadlocking

Deadlocking renders the internal and external door locking controls inoperative.

Press button A to deadlock the vehicle. This is confirmed by fixed lighting of the direction indicators for approximately two seconds.

Note : A long press on button A, in addition to deadlocking, automatically closes the windows and the sunroof.

A second press on button A in the five seconds following deadlocking, changes deadlocking to normal locking. This is confirmed by fixed lighting of the direction indicators for approximately two seconds, accompanied by a brief sound of the horn.

Unlocking

Press button B to unlock the vehicle.

This is confirmed by rapid flashing of the direction indicators.

ELECTRONIC ENGINE IMMOBILISER

This locks the engine control system a few moments after the ignition has been switched off and therefore prevents starting of the vehicle by anyone who does not have the key.

Operation

Each key has an electronic chip which has a special code.

When the ignition is switched on, the key code is recognised and starting is possible.

If the key does not have a code or has a different code from that stored in the system memory, the vehicle will not start.

YOUR 406 COUPE AT A GLANCE

Normal key

Remote

control key

01-07-2002

STARTING

STOP position:

The ignition is off.

1st notch, Accessories position:

The ignition is off but the accessories can be used.

2nd notch, Running position:

The ignition is on.

Starting position:

Operates the starter.

Steering lock

Before starting, unlock the steering if necessary, by gently turning the steering wheel at the same time as you turn the key.

It is advisable to press the clutch

pedal while operating the starter to make starting easier.

Starting a petrol engine

Do not press the accelerator. Operate the starter, without

releasing the key, until the engine turns.

Starting a diesel engine

Do not press the accelerator. Turn the key to position "M ". If the engine is warm enough, the

pre-heat light does not come on and you can start immediately.

If the pre-heat light comes on, wait for it to go out before operating the starter.

If the engine stalls, it is necessary to return the key to position "S " before restarting.

YOUR 406 COUPE AT A GLANCE

Never race a cold engine.

Never run the engine in a confined space.

Do not make any modifications to the steering lock.

01-07-2002

Automatic wipe

In the AUTO position, the wipers operate automatically and adjust

their speed to the intensity of the rainfall.

STEERING WHEEL ST ALKS LIGHTS

Front and rear lights (ring A)

Lights off.

Side lights.

Dipped / main beam headlamp.

Automatic switching on of lights.

YOUR 406 COUPE AT A GLANCE

Front fog lamps and rear fog lamp (ring B)

Turn the ring to the front to switch on and to the rear to switch off. The status is shown by the indicator light on the instrument panel.

Front fog lamps on (first rotation of the ring forwards)

Front and rear fog lamps on (2nd rotation of the ring forwards).

WINDSCREEN WIPERS

2 Rapid wipe (heavy rain). 1 Normal wipe (moderate

rain).

AUTO Automatic wipe.

0 Off

 Single wipe

Windscreen wash: pull the stalk towards you.

01-07-2002

Manual front seats 1 - Forwards-backwards adjustment.

2 - Seat cushion angle adjustment. 3 - Seat height adjustment 4 - Seat back angle adjustment. 5 - Lumbar adjustment. 6 - Seat back tilt.

Electric front seats

A - Forwards-backwards adjust-

ment.

B - Seat cushion angle adjust-

ment.

C - Seat height adjustment D - Seat back angle adjustment.

M - Memorises the settings.

Switch on the ignition and adjust the seat and the mirrors.

Press simultaneously on button "M" and "1" for the first position or "M" and "2" for the second position.

1 - Recalls the first position. 2 - Recalls the second

position.

YOUR 406 COUPE AT A GLANCE

THE SEATS

01-07-2002

FRONT AIR BAGS Disarming the passenger

air bag*

☞ Insert the ignition key in switch

1 and turn it to:

– the "ON " position, the passen-

ger air bag is armed.

– the "OFF " position, the pas-

senger air bag is disarmed.

Operating check

With the igntition switched on (2nd notch) this warning light, accompanied by an audible signal and the message "Passen- ger air bag disarmed" on the multi-function display, indicates that the passenger air bag is disarmed (switch in the "OFF" position).

The warning light remains on throughout the disarming process.

Passenger air bag precautions

For a vehicle fitted with a disarming switch:

- disarm the air bag if you install a rearfacing child seat.

- arm the air bag for an adult passenger.

For a vehicle not fitted with a disarming switch:

- do not install rearfacing child seats on the front passenger seat.

Never place your feet or any object on the fascia.

SIDE AIR BAGS

These are incorporated into the front seat back, on the door side.

They are triggered independently, on the side on which the collision occurs.

Operating check

This is by means of the warning light on the instrument panel.

It comes on for six seconds when the ignition is switched on.

If the warning light:

- does not come on when the ignition is switched on or,

- does not switch off after six seconds or,

- flashes for five minutes then remains on,

Consult your PEUGEOT dealer.

* According to destination.

YOUR 406 COUPE AT A GLANCE

01-07-2002

125

YOUR 406 COUPE AT A GLANCE

STEERING WHEEL HEIGHT AND DEPTH ADJUSTMENT

☞ Pull handle A to unlock the

steering wheel. Adjust the height and depth of

the steering wheel then lock it by pushing handle A in fully.

COURTESY LIGHT

Off.

Lights when one of the doors is opened.

Permanently lit, with the key in the accessories position or with the ignition on.

MAP READING LIGHTS

With the ignition switched on or the key in the accessories position, operate the relevant switch.

SUNROOF

• To tilt

Press part A of the switch. To close, press part B of the switch until the roof is completely closed.

• To open

Press part B of the switch. To close, press part A of the switch until the roof is completely closed.

01-07-2002

116

117

1 - Driver's electric window. 2 - Passenger's electric window.

Manual mode:

Press or pull the switch lightly. The window stops as soon as the switch is released.

Automatic mode:

Press or pull the switch firmly. One touch completely opens or closes the window.

Safety auto-reverse: when the driver's window rises and meets an obstacle, it stops and lowers again.

YOUR 406 COUPE AT A GLANCE

Turn knob 6 to the right or to the left to select the corresponding mirror. Move the knob in all four directions to adjust.

Electric folding mirrors With the ignition on, turn knob 6 to position A.

ELECTRIC WINDOWS

ELECTRIC REAR VIEW MIRRORS

01-07-2002

113

114

YOUR 406 COUPE AT A GLANCE

AUTOMATIC AIR CONDITIONING

N° Symbol Function

1 Temperature

adjustment.

2 Automatic

visibility programme.

3 Automatic

comfort control.

4 Rear screen

demisting.

5 Air distribution

adjustment.

6 Air conditioning

control.

7 Air flow

adjustment.

8 Air inlet

control.

01-07-2002

Moving Off With the engine turning, to move off from position P:

☞ press the brake pedal to change out of position P (shift lock), ☞ select the required position (R, D, 3, 2 or 1) then gradually release the brake pedal; the vehicle moves off imme-

diately.

You can also move off from position N :

☞ release the handbrake, keeping your foot on the brake pedal, ☞ select the required position (R, D, 3, 2 or 1) then gradually release the brake pedal; the vehicle moves off imme-

diately.

The four speed automatic gearbox offers a choice between the comfort of integral operation, enhanced by a

sport programme (switch A) and a snow programme (switch B).

Gear selection gate

☞ Move the lever in the gate to select a position.

Once the position is selected, the indicator light for that position illuminates on the instrument panel display.

Park: for immobilising the vehicle and starting the engine, with the handbrake on or off. Reverse: for reversing (select this position with the vehicle stationary, engine at idle). Neutral: for starting the engine and for parking, with the handbrake on. Drive: for driving in autoadaptive mode (automatic changing of the four gears).

3 - for driving in town or on winding roads (automatic changing of the first 3 gears only). 2 - for driving in the mountains or for towing a trailer (automatic changing of the first 2 gears only). 1 - for tackling steep gradients (selection of first gear only).

Special feature of the gearbox (2 litre petrol engine)

Selection of first gear is by pressing switch C with the selector lever in position 2 .

To change out of first gear, press switch C again or move the gear lever.

AUTOMA TIC AUTOADAPTIVE GEARBOX

2 litre engine

YOUR 406 COUPE AT A GLANCE

V6 engine

01-07-2002

119

CRUISE CONTROL

The cruise control makes it possible to maintain a constant vehicle speed programmed by the driver, whatever the condition of the road and without action on the accelerator or brake pedal.

To be memorised, the vehicle speed must be above approximately 25mph (40 km/h).

Operation

☞ Place knob 1 in the ON position. A speed can be memorised.

☞ Place knob 1 in the OFF position to deactivate the system.

Memorising a speed

When you reach the required speed, press button 2 or 3. The speed is memorised and will be maintained automatically.

Note: it is possible to accelerate temporarily without deactivating the cruise control.

Deactivation of the memorised speed

If you wish to deactivate the memorised speed:

☞ press button 4 or the clutch or brake pedal.

Recalling the memorised speed

Following deactivation, press button 4. Your vehicle resumes the last speed memorised.

YOUR 406 COUPE AT A GLANCE

Do not use the cruise control on slippery roads or in heavy traffic.

Modifying a memorised speed

To memorise a speed greater than the previous speed:

☞ press button 3 ; ☞ release it when you have

reached the required speed.

To memorise a speed lower than the previous speed:

☞ press button 2 ; ☞ release it when you reach the

required speed.

Cancelling the memorised speed

☞ Place knob 1 in the OFF posi-

tion or switch off the ignition.

01-07-2002

122

FUEL FILLER FLAP

To open:firmly pull the handle on

the floor to the outside of the driver's seat.

To close: from outside the vehicle, push back the flap and check that it is secured correctly.

Filling with fuel

Switch off the engine.

A filler cap hook is provided. Alabel on the inside of the flap shows which fuels are permitted and which

are not. The capacity of the tank is approximately 15.4 gallons (70 litres).

Low fuel level warning light

From the time this light comes on, the range remaining is approximately 30 miles (50 km).

OPENING THE BONNET

Inside the vehicle: Pull the han-

dle.

Outside the vehicle:

Raise the catch and open the bonnet.

YOUR 406 COUPE AT A GLANCE

01-07-2002

PEUGEOT SERVICING

Your vehicle benefits from extended service intervals.

• For petrol engines: every 20,000 miles (30 000 km) or every two years.

• For direct injection diesel engines: every 12,000 miles (20 000 km) or every two years.

The extension of the service intervals means that the engine oil level must be checked regularly: topping up of the oil between oil changes is normal.

It is for this reason that the PEUGEOT network invites you to an intermediate visit between each regular service. The date of this service is not shown by the service indicator. It is to be carried out at least every 10,000 miles ( 15 000 km) for petrol engines and every 6,000 miles (10 000 km) for direct injection diesel engines. A Peugeot dealer will carry out a quick check, and will top up the levels if necessary (oil, coolant, screenwash up to 2 litres).

If the oil level is too low there is a risk of serious damage to the engine: check the engine oil level at least every 2,000 miles (3 000 km) or 3,000 miles (5 000 km), depending on the conditions of use.

The extended service intervals have been made possible by technical modifications to the vehicles and lubricants: THUS IT IS ESSENTIALTO ONLY USE ENGINE LUBRICANTS WHICH ARE APPROVED AND RECOMMENDED BY THE MANUFACTURER

MAINTENANCE OF YOUR 406 COUPE

01-07-2002

SPECIAL FEATURES

Some of your vehicle's vital components have specific servicing schedules.

The air bags and the pretensioning seat belts must be replaced every 10 years. The brake fluid must be replaced every 36/40,000 miles (60 000 km) or every 2 years. The pollen filter must be checked at each visit to the PEUGEOT dealer (intermediate visits and regular services). Replacement of the timing belt: consult your Peugeot dealer.

MAINTENANCE OF YOUR 406 COUPE

Arduous conditions of use

If the vehicle is used in certain particularly arduous conditions:

• Continuous door-to-door use.

• Town use (e.g. taxi).

• Repeated short journeys, with the engine cold in low temperatures.

or for long stays in the following conditions:

• Hot countries with temperatures often above 30°C.

• Cold countries with temperatures often below minus 15°C.

• Countries with a dusty atmosphere.

• Countries whose lubricants or fuels do not conform to our recommendations,

it is necessary to follow an "Arduous conditions" servicing schedule, which includes special operations and shorter service intervals:

• Every 12,000 miles (20 000 km) or every year for petrol engine vehicles.

• Every 9,000 miles (15 000 km) or every year for Direct Injection Diesel engine vehicles.

01-07-2002

SPECIAL FEATURES

Some of your vehicle's vital components have specific servicing schedules.

MAINTENANCE OF YOUR 406 COUPE

Arduous conditions of use

If the vehicle is used in certain particularly arduous conditions:

• Continuous door-to-door use.

• Town use (e.g. taxi).

• Repeated short journeys, with the engine cold in low temperatures.

or for long stays in the following conditions:

• Hot countries with temperatures often above 30°C.

• Cold countries with temperatures often below minus 15°C.

• Countries with a dusty atmosphere.

• Countries whose lubricants or fuels do not conform to our recommendations,

it is necessary to follow an "Arduous conditions" servicing schedule, which includes special operations and shorter service intervals:

• Every 12,000 miles (20 000 km) or every year for petrol engine vehicles.

• Every 9,000 miles (15 000 km) or every year for Direct Injection Diesel engine vehicles.

01-07-2002

SERVICE INDICATOR

This is a visual reminder of when the next service is due. This service is to be carried out according to the manufacturer's servicing schedule.

Operation

As soon as the ignition is switched on and for 5 seconds, the spanner symbolising ''service operation'' is lit. The trip recorder display shows you the distance remaining (in round figures) before the next service.

Example: 4,800 km remain before the next service is due. When the ignition comes on and for 5 seconds the display indicates:

5 seconds after the ignition is switched on, the total distance recorder resumes normal operation and the display shows the total or trip distances.

The distance remaining before the next service is less than 1,000 km.

Example: 900 km remain before the

next service is due. When switching on the ignition and

for 5 seconds, the display shows:

5 seconds after the ignition is switched on, the total distance recorder resumes normal operation and the symbol remains lit.

This indicates that a service should be carried out shortly. The display shows the total or trip distances.

The service is overdue

Each time the ignition is switched on and for 5 seconds, the symbol and the excess distance flash.

Example: the service is overdue by 300 km. The service should be carried out very shortly.

When the ignition is switched on and for 5 seconds, the display shows:

5 seconds after the ignition is switched on, the total distance recorder resumes normal operation and the symbol remains lit. The display shows the total or trip distances.

YOUR 406 COUPE IN DETAIL

109

01-07-2002

Resetting the service indicator

Your PEUGEOT dealer carries out this operation after each service. However, if you carry out the service yourself, the reset procedure is as follows:

☞ - Switch off the ignition.

- Press and hold button 1.

- Switch on the ignition.

The display begins a 10 second countdown.

- Keep button 1 pressed for 10 seconds.

The display shows [=0] and the service symbol disappears.

YOUR 406 COUPE IN DETAIL

110

01-07-2002

SERVICE LEVELS

Each vehicle has its own servicing cycle, based upon the engine type.

The servicing cycle consists of alternating 2 types of service A and C, intermediate visits, and a few additional operations depending on your vehicle; these correspond to key stages in the life of your 406 Coupé.

Level B service is designed for less recent vehicles.

When the first service is carried out and at each subsequent service, your dealer will advise you of the type and content of the next service due.

MAINTENANCE OF YOUR 406 COUPE

These fixed operations are carried out with synthetic based oil; Fuel Economy oil or synthetic oil may also be used.

* Whichever comes first.

Intermediate visit.

THE MAINTENANCE CYCLE FOR YOUR 406 COUPE PETROL ENGINE

2 litre 16V Petrol Engine: Service every 20,000 miles (30 000 km) or 2 years

MILES (KM) 20,000 (30 000) 40,000 (60 000) 60,000 (90 000)

80,000 (120 000) 100,000 (150 000) 120,000 (180 000) 140,000 (210 000) 160,000 (240 000)

1st service at 6,000 miles

(10 000 km) or 6 months*.

This is necessary

in order to benefit from

the warranty.

01-07-2002

80,000 (120 000) 100,000 (150 000) 120,000 (180 000) 140,000 (210 000) 160,000 (240 000)

MILES (KM) 20,000 (30 000) 40,000 (60 000) 60,000 (90 000)

These fixed operations are carried out with synthetic based oil; Fuel Economy oil or synthetic oil may also be used.

* Whichever comes first.

Intermediate visit.

THE MAINTENANCE CYCLE FOR YOUR 406 COUPE PETROL ENGINE

V6 24V Petrol injection Engine: Service every 20,000 miles (30 000 km) or 2 years

1st service at 6,000 miles

(10 000 km) or 6 months*.

This is necessary in order to benefit from the warranty.

+ replacement of air filter

+ replacement of fuel filter

+ replacement of air filter

+ replacement of fuel filter

MAINTENANCE OF YOUR 406 COUPE

01-07-2002

These fixed operations are carried out with synthetic oil.

Warning: only use 5W 40 oil.

* Whichever comes first.

Intermediate visit.

MILES (KM) 12,000 (20 000) 24,000 (40 000) 36,000 (60 000) 48,000 (80 000)

60,000 (100 000) 72,000 (120 000) 84,000 (140 000) 96,000 (160 000) 108,000 (180 000)

THE MAINTENANCE CYCLE FOR YOUR 406 COUPE TURBO DIESEL HDI ENGINE

2.2 litre 16V Turbo Diesel HDI engine: service every 12,000 miles (20 000 km) or 2 years

1st service at 6,000 miles

(10,000 km) or 6 months*.

This is necessary in order to benefit from the warranty

+ maintenance of particulate

emission filter

+ maintenance of particulate

emission filter

MAINTENANCE OF YOUR 406 COUPE

01-07-2002

MAINTENANCE OF YOUR 406 COUPE

 All driving conditions. oArduous conditions.

A AND C SERVICES AND THE INTERMEDIATE VISIT

- Oil filter



- Fuel filter(Petrol)



- Fuel filter element (diesel only).



- Air filter element



- Spark plugs (petrol only)



- Engine oil



- Bleed fuel filter (diesel only)



- Engine oil (check + top-up)



- Gearbox oil (check + top-up)



- Battery (check + top-up)



- Front/rear screen wash (check + top-up )



- Coolant (check + top-up)



- Brake fluid (check + top-up)



- Power steering fluid (check + top-up according to specification)



- Operation of lights and indicators



- Condition of glass, headlamp & light lenses and mirrors



- Horn



- Windscreen washer jets



- Condition of wiper blades



- Condition and tension of the ancillary drive belts



- Handbrake



- Condition of hydraulic circuits (hoses and covers)



- Condition of rubber boots and gaiters



- Brake pads

 o

- Play in hubs, link rods, ball joints, flexible mountings



- Shock absorbers



- Rear drum brake lining wear



- Condition and pressure of tyres (including spare wheel)



- Emission control check according to current legislation (petrol only)



- Smoke opacity (diesel only)



- Pollen filter (according to specification)

 o

- Visual check of the whole vehicle by a Peugeot technician



DRAIN and REFILL

REPLACE

LEVELS

CHECK



ROAD TEST

- Courtesy vehicle



SERVICE

Level

Operation Description of Operation First Service

A C Intermediate

01-07-2002

TRADE NAMES OF APPROVED AND RECOMMENDED LUBRICANTS IN EUROPE

(1)

PETROL

(1) Minimum quality standard: Petrol engines ACEA A3 and API SH/SJ; Diesel engines: ACEA B3 and API CF/CD - ACEA = Association des Constructeurs Europeens Automobiles

(Association of European Automobile Manufacturers) - API = American Petroleum Institute. If oil is used which does not conform to the ACEA A3-B3 standard,

this requires the "Arduous Conditions" servicing schedule to be followed, which involves shorter intervals between services.

*This Fuel Economy oil can only be used in engines designed for its use (from 2000 Model Year). Use only 5W40 oil for the 2.2 litre HDI engine.

Fuel Economy oil may not be used for the 2.2 litre 16 valve petrol engine

PETROL

DIESEL DIESEL

01-07-2002

MAINTENANCE OF YOUR 406 COUPE

Recommendations for approved lubricants

The oils which appear in the table opposite are suitable for most purposes.

The diagram opposite states the optimum range of viscosity depending on the temperatures at which the oils are to be used.

It is also possible to use synthetic oils of "superior quality".

In the absence of semi-synthetic or synthetic oils, oils of API SH/SJ quality (for petrol engines) or CD/CF quality (for diesel engines) may be used by following the "Arduous Conditions" maintenance schedule, which specifies shorter service intervals.

Do not hesitate to ask for advice from a PEUGEOT dealer to maintain driving pleasure and to minimise the maintenance cost of your vehicle.

For countries outside Europe, please contact a local PEUGEOT dealer.

ONLY ONLY

Manual Gearbox ESSO GEAR OIL BV TOTAL TRANSMISSION BV

75W-80W PR 9736.41 75W-80W

Automatic Gearbox ONLY

4HP20 – AL4

ATF 4HP20-AL4 PR 9736.22 Power steering ESSO ATF D TOT ALFLUIDE AT42

PR 9730.94

Power steering FLUIDE DA PR9730. A1* Brake fluid PEUGEOT DOT4

Coolant

PROCOR TM108/GLYSANTIN G33 or REVKOGEL 2000

ONLY protection to minus 35C

* Only for extremely cold countries.

Other approved products

01-07-2002

1 - Fuel filler cap warning light. 2 - Door open warning light. 3 - Dipped beam headlamps

indicator light.

4 - Main beam headlamps

indicator light.

5 - Rev. counter. 6 - Left-hand direction indicator. 7 - Central (STOP) warning light. 8 - Low fuel level warning light. 9 - Fuel gauge.

10 -Service indicator, oil level indica-

tor and total distance recorder.

11 - Right-hand direction indicator. 12 -Speedometer. 13 -Clogging of the particulate

emission filter warning light (Diesel).

14 -Front fog lamps indicator light. 15 -Rear fog lamp indicator light. 16 -Dynamic stability control

(ASR/ESP) warning light (petrol versions only).

17 -Low coolant level warning light. 18 -Coolant temperature indicator. 19 -Trip recorder zero reset button. 20 -Handbrake and low brake fluid

level warning light.

21 -Seat belt not fastened warning

light.

22 -Air bags warning light. 23 -ABS system warning light. 24 -Engine diagnostics warning

light.

25 -Battery charge warning light. 26 -Diesel engine preheating

indicator light.

27 -Passenger air bag disarming

warning light.

28 -Water in diesel filter warning

light.

29 -Front brake pad wear warning

light.

30 -Engine oil pressure warning

light.

31 -Electronic immobiliser warning

light.

32 -Lighting rheostat. 33 -Engine oil temperature indicator.

YOUR 406 COUPE IN DETAIL

102

INSTRUMENT PANEL DIALS: PETROL / DIESEL

01-07-2002

YOUR 406 COUPE IN DETAIL

103

1 - Fuel filler cap warning light. 2 - Door open warning light. 3 - Dipped beam headlamps indi-

cator light.

4 - Main beam headlamps indicator

light.

5 - Rev. counter. 6 - Left-hand direction indicator. 7 - Central (STOP) warning light. 8 - Low fuel level warning light. 9 - Fuel gauge.

10 -Service indicator, oil level

indicator and total distance recorder.

11 - Right-hand direction indicator. 12 -Speedometer. 13 -Front fog lamps indicator light. 14 -Rear fog lamp indicator light. 15 -Dynamic Stability Control

(ASR/ESP) warning light.

16 -Low coolant level warning light.

17 -Coolant temperature indicator. 18 -Trip recorder zero reset button. 19 -Handbrake and low brake fluid

level warning light.

20 -Seat belt not fastened warning

light.

21 - Air bags warning light. 22 -ABS system warning light. 23 -Engine diagnostics warning

light.

24 -Battery charge warning light. 25 -Passenger air bag disarming

warning light.

26 -Front brake pad wear warning

light.

27 -Engine oil pressure warning

light.

28 -Operating programmes. 29 -Gear lever position indicator. 30 -Electronic immobiliser warning

light.

31 -Lighting rheostat. 32 -Engine oil temperature indicator.

INSTRUMENT PANEL DIALS: AUTOMATIC GEARBOX

01-07-2002

YOUR 406 COUPE IN DETAIL

104

WARNING LIGHTS AND INDICATORS

A permanently lit warning light, or flashing with the engine running, is an indication of a malfunction in the relevant unit. Some warning lights may be linked to buzzers and a message on the multi–function display. Do not ignore this warning: contact a PEUGEOT dealer as quickly as possible.

If the Central (STOP) warning light comes on when you are driving, stop your vehicle immediately where it is safe to do so.

Central (STOP) warning light

Linked to the "engine oil pressure", ''the low brake fluid level'', '' the coolant temperature gauge'' and ''electronic brake force distribution system fault'' warning lights. It comes on each time the igni-

tion is switched on. Stop immediately if it flashes with the engine running. Contact a PEUGEOT dealer.

Engine oil pressure warning light

Linked to the central (STOP) warning light. Stop immediately if it comes on with the engine running.

It indicates either: – insufficient oil pressure, – lack of oil in the lubrication circuit. Top up the oil level.

Contact a PEUGEOT dealer as soon as possible.

Low coolant level warning light

Stop immediately.

Allow the engine to cool before topping up.

The cooling system is pressurised. In the event of a breakdown and to

prevent the risk of scalding, turn the cap to the first notch to allow the pressure to drop.

Once the pressure has dropped, remove the cap and top up the level.

Contact a PEUGEOT dealer.

Fuel filler cap warning light

This comes on if the fuel cap is not correctly screwed

on or is missing.

01-07-2002

YOUR 406 COUPE IN DETAIL

105

Handbrake, low brake fluid level and electronic brake force distribution warning light.

This comes on each time the ignition is switched on.

It indicates either: – that the handbrake is on or has not been released correctly, and when coupled with the central (STOP) warning light: – an excessive drop in the brake fluid level (if the light remains on even with the

handbrake released),

– lit at the same time as the ABS warning light, it indicates a malfunction of the

electronic brake force distribution system.

Stop immediately.

Contact a PEUGEOT dealer.

Anti-lock braking system (ABS) warning light

This comes on for 3 seconds each time the ignition is switched on. If it comes on at over 8 m.p.h. (12 km/h), it indicates a malfunction of

the ABS. However, the vehicle retains conventional servo-assisted braking. Contact a PEUGEOT dealer.

Clogging of the particulate emission filter warning light (diesel engine)

Display of this warning light is accompanied by an audible signal.

The flashing of this light while the engine is running is caused either by the particulate emission filter being overloaded or by the engine running too long at idle (white smoke from the exhaust). There is a risk of the filter clogging if the same conditions of operation are maintained.

As soon as possible, drive for at least three minutes at a speed exceeding 37 m.p.h. (60 km/h), if driving conditions allow this.

If the light comes on, contact a PEUGEOT dealer as soon as possible.

Front brake pad wear warning light

For your safety, have the pads replaced as soon as this light comes on.

ESP Electronic Stability Programme operation indicator light

This flashes when the system is operating.

It is lit continuously if disarmed or if there is a fault.

01-07-2002

YOUR 406 COUPE IN DETAIL

106

Passenger air bag disarming warning light

Illumination of this warning light is accompanied by an audible signal and a message on the multifunction display. If the passenger air bag is disarmed, the indicator light comes on when the ignition is switched on and remains on.

In all cases, if the warning light flashes, contact a PEUGEOT dealer.

Air bag warning light

The warning light comes on for 6 seconds when the ignition is switched on.

Illumination of this warning light, with the engine running, is accompanied by an audible signal and a message on the multi-function display indicating the cause of the front, side or curtain air bag fault.

Contact a PEUGEOT dealer.

Water in diesel filter warning light (according to destination)

Contact a PEUGEOT dealer as soon as possible.

There is a risk of damage to the injection system.

Diesel pre-heating indicator light

If the engine is warm enough, the light will not come on and you can start the engine without waiting.

If the light comes on, wait until it goes out before trying the starter.

Engine diagnostics warning light

This comes on each time the ignition is switched on. If it is lit continuously with the engine runnning, this indicates a fault in

the emission control system. If it flashes with the engine running, this indicates a malfunction in the injection

or ignition system. There is a risk of damage to the catalytic converter (petrol engine only). Contact a PEUGEOT dealer as soon as possible.

Battery charge warning light

This comes on each time the ignition is switched on.

If it comes on with the engine running it can indicate: – faulty operation of the charging circuit, – loose battery or starter terminals, – a cut or slack alternator belt, – an alternator fault.

Contact a PEUGEOT dealer.

01-07-2002

Door open warning

light

When the engine is running,

the warning light indicates

that a door has not been closed properly or that the boot is open.

Electronic immobiliser

warning light

This indicates a malfunction

of the electronic immobiliser. Contact a PEUGEOT dealer.

Low fuel level warning light.

When this warning

light comes on, you have enough fuel to drive at least 30 miles (50 km). The tank capacity is approximately 70 litres (15.4 gallons).

Coolant temperature indicator

When the needle is in zone A, the temperature is correct.

When the needle is in zone B, the temperature is too high. The central (STOP) warning light flashes.

You must stop immediately.

Contact a PEUGEOT dealer.

Seat belt not fastened warning light

With the engine running, the indicator light comes on when the driver's seat belt is not fastened.

YOUR 406 COUPE IN DETAIL

107

01-07-2002

+ 106 hidden pages