Thank you for purchasing this PENTAX
Digital Camera.
When you use this camera for the first time, it
is recommended you read this Quick Guide
first in order to gain a feel for the basic
operation of the camera. Refer to the
separately supplied “Operating Manual” for
further explanation of functions and
advanced operations of the camera.
ENG
0
To users of this camera
• Do not use or store this device in the vicinity of equipment that generates
strong electromagnetic radiation or magnetic fields.
Strong static charges or the magnetic fields produced by equipment such as
radio transmitters could interfere with the monitor, damage the stored data,
or affect the product’s internal circuitry and cause camera misoperation.
• The liquid crystal panel used for the display is manufactured using extremely
high precision technology. Although the level of functioning pixels is 99.99%
or better, you should be aware that 0.01% or fewer of the pixels may not
illuminate or may illuminate when they should not. However, this has no
effect on the recorded image.
• If you point the camera toward an object that is bright, a band of light may
appear on the screen display. This phenomenon is referred to as “smear”
and is not a malfunction of the camera.
• There is a possibility that the illustrations and the screen display in this
manual are different from the actual ones.
• In this manual, SD Memory Cards, SDHC Memory Cards, and SDXC
Memory Cards are referred to as SD Memory Cards hereafter.
• In this manual, the generic term “computer(s)” refers to either a Windows PC
or a Macintosh hereafter.
• In this manual, the term “battery(ies)” refers to any type of batteries used for
this camera and its accessories.
Using Your Camera Safely
We have paid close attention to the safety of this product. When
using this product, we request your special attention regarding items
marked with the following symbols.
Warning
Caution
This symbol indicates that violating this item could
cause serious personal injuries.
This symbol indicates that violating this item could
cause minor or medium personal injuries, or loss
of property.
About the Camera
Warning
• Do not disassemble or modify the camera. High voltage areas are
present inside the camera, with the risk of electric shock.
• If the camera interior is exposed due to dropping or otherwise
damaging the camera, never touch the exposed portion. There is a risk
of electric shock.
• Wrapping the strap around your neck is dangerous. Take care that
small children do not hang the strap around their necks.
• If any irregularities occur during use, such as smoke or a strange odor,
stop use immediately, remove the battery, and contact your nearest
PENTAX Service Center. Continuing to use the camera can cause a
fire or electric shock.
Caution
• Do not place your finger over the flash when discharging the flash. You
may burn yourself.
• Do not cover the flash with clothes when discharging the flash.
Discoloration may occur.
• Some portions of the camera heat up during use. There is a risk of low
temperature burns when holding such portions for long periods.
1
• Should the monitor be damaged, be careful of glass fragments. Also,
be careful not to allow the liquid crystal to get on your skin, in your eyes
or mouth.
• Depending on your individual factors or physical condition, the use of
the camera may cause itching, rashes or blisters. In case of any
abnormality, stop using the camera and get medical attention
immediately.
About the Power Adapter
Warning
• Always use the power adapter exclusively developed for this camera,
with the specified power and voltage. Using a power adapter not
exclusive to this camera, or using the exclusive power adapter with an
unspecified power or voltage can cause a fire, electric shock, or
camera breakdown. The specified voltage is 100 - 240V AC.
• Do not disassemble or modify the power adapter. This can cause a fire
or electric shock.
• If the generation of smoke or strange odor from the power adapter or
other abnormality occurs, immediately discontinue use and consult a
PENTAX Service Center. Continuing to use the adapter can cause a
fire or electric shock.
• If water should happen to get inside the power adapter, consult a
PENTAX Service Center. Continuing to use the adapter can cause a
fire or electric shock.
• If a thunder storm should occur while using the power adapter, unplug
the adapter and discontinue use. Continuing to use the adapter can
cause damage to the equipment, fire, or electric shock.
• Wipe off the plug of the power adapter if it becomes covered with dust.
Accumulated dust on the plug may cause a fire.
Caution
• Do not place or drop heavy objects on the power adapter. Doing so
may damage the adapter. Should the power adapter be damaged,
consult a PENTAX Service Center.
2
• Do not touch or short-circuit the terminal area of the power adapter
while the cord is plugged in.
• Do not handle the power adapter with wet hands. This can cause an
electric shock.
• Do not drop the power adapter, or subject it to violent impact. This can
cause equipment breakdown.
• Do not use the power adapter to charge a battery other than a
rechargeable lithium-ion battery D-LI108. This can cause an explosion,
or heating, or may damage the power adapter.
About the Battery
Warning
• Be sure to store the battery out of the reach of small children. Placing
it in their mouths may cause an electric shock.
• If any leakage from the battery should come in contact with your eyes,
do not rub them. Flush your eyes with clean water and get medical
attention immediately.
Caution
• Only use the specified battery with this camera. Use of other batteries
may cause an explosion or fire.
• Do not disassemble the battery. Disassembling the battery may cause
an explosion or leakage.
• Remove the battery from the camera immediately if it becomes hot or
begins to smoke. Be careful not to burn yourself during removal.
• Keep wires, hairpins, and other metal objects away from the + and contacts of the battery.
• Do not short the battery or dispose of the battery in fire. This can cause
an explosion or fire.
• If any leakage from the battery should come in contact with skin or
clothes, wash the affected areas thoroughly with water.
3
• Precautions for D-LI108 Battery Usage:
BATTERY MAY EXPLODE OR FIRE IF MISTREATED.
- DO NOT DISASSEMBLE OR DISPOSE OF IN FIRE.
- DO NOT CHARGE EXCEPT SPECIFIED CHARGING CONDITION.
- DO NOT HEAT ABOVE 140°F / 60°C, OR SHORT CIRCUIT.
- DO NOT CRUSH OR MODIFY.
Keep the Camera and its Accessories out of the Reach of
Small Children
Warning
• Do not place the camera and its accessories within the reach of small
children.
1. If the product falls or is operated accidentally, it may cause serious
personal injuries.
2. Wrapping the strap around a neck may cause suffocation.
3. To avoid the risk of a small accessory such as the battery or SD
Memory Cards from being swallowed by mistake, keep them out of
the reach of small children. Seek medical attention immediately if an
accessory is accidentally swallowed.
4
Care to be Taken During Handling
Before Using Your Camera
• When traveling, take the Worldwide Service Network listing that is
included in the package. This will be useful if you experience problems
abroad.
• When the camera has not been used for a long time, make sure that it
is still working properly, particularly prior to taking important pictures
(such as at a wedding or when traveling). Contents of the recording
cannot be guaranteed if recording, playback or transferring your data
to a computer, etc. is not possible due to a malfunction of your camera
or recording media (SD Memory Card), etc.
About the Battery
• Storing the battery fully charged may decrease the battery
performance. Avoid storing in high temperatures.
• If the battery is left inserted and the camera is not used for a long time,
the battery will over-discharge and shorten the battery’s life.
• Charging the battery a day before use or on the day of use is
recommended.
Precautions on Carrying and Using Your Camera
• Do not subject the camera to high temperatures or high humidity. Do
not leave the camera in a vehicle, as the temperature can get very high.
• Do not subject the camera to strong vibrations, shocks, or pressure.
Use a cushion to protect the camera from vibrations of motorcycles,
automobiles, or ships.
• The temperature range for camera use is 0°C to 40°C (32°F to 104°F).
• The monitor may appear black at high temperatures, but will return to
normal at normal temperatures.
• The monitor may respond more slowly at low temperatures. This is due
to liquid crystal properties, and is not a malfunction.
• Sudden temperature changes will cause condensation on the inside
and outside of the camera. Place the camera in your bag or a plastic
5
bag, and remove it after the temperature of the camera and
surroundings are equalized.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or
salt. These could cause the camera to breakdown. Wipe the camera to
dry off any rain or water drops.
• Please do not press forcefully on the monitor. This could cause it to
break or malfunction.
• Be careful not to sit down with the camera in your back pocket as this
may damage the exterior of the camera or the display.
• Be careful not to overtighten the tripod screw when using a tripod.
• The lens on this camera is not interchangeable. The lens is not
removable.
Cleaning Your Camera
• Do not clean the camera with organic solvents such as thinner, alcohol
or benzine.
• Use a lens brush to remove dust accumulated on the lens. Never use
a spray blower for cleaning as it may damage the lens.
Storing Your Camera
• Do not store the camera with preservatives or chemicals. Storage in
high temperatures and high humidity can cause mold to grow on the
camera. Remove the camera from its case and store it in a dry and
well-ventilated location.
• Avoid using or storing the camera where it may be exposed to static
electricity or electrical interference.
• Avoid using or storing the camera in direct sunlight or where it may be
exposed to rapid changes in temperature or to condensation.
Other Precautions
• Periodic inspections are recommended every one to two years to
maintain high performance.
• Please note that deleting data, or formatting the SD Memory Cards or
the built-in memory does not completely erase the original data.
6
Deleted files can sometimes be recovered using commercially
Write-protect
switch
available software. It is user’s responsibility to ensure the privacy of
such data.
• The SD Memory Card is equipped with
a write-protect switch. Setting the
switch to LOCK prevents new data
from being recorded on the card, the
stored data from being deleted, and
the card from being formatted by the
camera or computer.
r appears on the display when the
card is write-protected.
• Care should be taken when removing the SD Memory Card
immediately after using the camera, as the card may be hot.
• Keep the battery/card cover closed and do not remove the SD Memory
Card or turn the camera off while the data is being played back or
saved to the card, or the camera is connected to a computer with the
USB cable, as this may cause the data to be lost or the card to be
damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep
it away from water and store away from high temperature.
• Do not remove the SD Memory Card during formatting as this may
damage the card and render it unusable.
• The data on the SD Memory Card may be deleted in the following
circumstances. We do not accept any liability for data that is deleted
(1) when the SD Memory Card is mishandled by the user.
(2) when the SD Memory Card is exposed to static electricity or
electrical interference.
(3) when the SD Memory Card has not been used for a long time.
(4) when the SD Memory Card is ejected or the battery is removed
while the data on the card is being recorded or accessed.
• If it is not used for a long time, the data on the card may become
unreadable. Be sure to regularly make a backup of important data on
a computer.
7
• When using an SD Memory Card with a slow recording speed,
recording may stop while you are taking movies even when there is
adequate space in the memory, or shooting and playback may take a
long time.
• Be sure to format SD Memory Cards that are unused or have been
used on another camera.
8
Checking the Contents of the Package
Check that your camera came complete with the items
listed below.
P Camera (Optio LS465) P Software (CD-ROM)
S-SW127
P Alternative Skins (10 types) P Strap (O-ST116)
P Lens Ring (O-LR2)
(installed on camera)
P Rechargeable lithium-ion battery
(D-LI108)
P USB cable (I-USB116)
P Power adapter (D-PA116)
P Operating Manual
O Quick Guide (this guide)
9
Lens
Flash
Battery/card cover
Microphone
Tripod socket
PC/AV terminal
Speaker
Self-timer lamp
Shutter release button
Q button
Movie button
Four-way controller
Power switch
Zoom button
Strap lug
OK button
Green/i button
3 button
Display
Names of Parts and Monitor Indicators
Front
Back
10
In this Quick Guide, the
keys on the four-way
control ler to be pressed
are indicated as shown
on the right.
Monitor Indicators
Battery level
+ 1 . 0
1 / 2 5 0
F 3 . 5
3 8
0 4 / 0 4 / 2 0 1 2
1 4 : 2 5
Memory status
Flash mode
Drive mode
Focus mode
Aperture
EV Compensation
Date imprint
setting
Face Detection
+
Built-in memory (without card)
?
SD Memory Card
r
Card is write-protected
No icon : Hometown
: Destination
Shooting mode
Digital Zoom/
Intelligent Zoom
Shake Reduction
icon
Date and time
Remaining image
storage capacity
Shutter speed
Focus frame
World Time setting
The following indicators are displayed in the still picture capture mode.
+1.0
+1.0
1/250
1/250
F3.5
F3.5
04/04/2012
38
38
04/04/2012 14:25
14:25
Battery Level Indicator
You can check the battery level by the indicator on the display.
Screen Display Battery Status
[Battery depleted] The camera will turn off after this message appears.
(green) Adequate power re mains.
(green) Battery is running low.
(yellow) Battery is running very low.
(red) Battery is exhausted.
11
2
5
3
4
Battery/card cover
Battery lock lever
* SD Memory Cards are
sold separately.
Before using the battery
Charge the battery before using it in the camera for the first time.
1
1
Prepare your camera for use before you start using it.
Preparing the Camera for Use
Attaching the Strap
Attach the strap supplied with the
camera as shown in the illustration.
Installing the Battery and an
SD Memory Card
Install the battery and an
SD Memory Card as
shown in the illustration.
SD Memory
Card
Battery
12
SD Memory Card socket
1
2
2
Memo
OFF
2
2
Turning the Camera On
Press the power switch.
The camera turns on and is ready to take still
pictures. Press the power switch again to turn
the camera off.
Make the Initial Settings.
The [Language/ u] screen appears when the camera is turned on for the
first time. Select the desired language and then set the date and time.
Use the four-way controller (2345) to select the desired
language.
Press the 4 button.
The [Initial Setting] screen appears.
If you accidentally select the wrong
language and press the 4 button,
press the four-way controller (5), use
the four-way controller (2345) to
select the desired language, and then
press the 4 button. The [Initial Setting]
screen appears in the selected language.
Initial Setting
Hometown
New York
Settings complete
MENU
Cancel
English
DST
OFF
OFF
13
Press the four-way controller (3)
OFF
3
MENU
Cancel
OK
OK
Hometown
DST
City
New York
4
5
6
7
8
Date Adjustment
Cancel
Date Format
Date 01/01/2012
Time
mm/ dd/yy
Settings complete
MENU
00:00
24h
9
to move the frame to
[W Hometown].
Initial Setting
Hometown
New York
Settings complete
MENU
Cancel
English
DST
OFF
OFF
Press the four-way controller (5).
The [W Hometown] screen
appears.
Use the four-way controller (45) to choose a city.
Press the four-way controller (3) to move the frame to [DST]
(Daylight Saving Time).
Use the four-way controller (45) to select O or P and press the
4 button.
The [Initial Setting] screen reappears.
Press the four-way controller (3) to select [Settings complete]
and press the 4 button.
The [Date Adjustment] screen appears.
Press the four-way controller (5)
to move the frame to [mm/dd/yy],
then use the four-way controller
(23) to choose the date format.
14
Press the four-way controller (5) to move the frame to [24h], then
10
11
12
13
14
12
15
use the four-way controller (23) to select [24h] (24-hour display)
or [12h] (12-hour display).
Press the four-way controller (5), then press the four-way
controller (3) to move the frame to [Date].
Press the four-way controller (5) to move the frame to [01]
(month), [01] (day) or [2012] (year), then use the four-way
controller (23) to set the date to the current date.
Press the four-way controller (5), then press the four-way
controller (3) to move the frame to [Time].
Set the time in the same manner as in .
Press the four-way controller (3) to select [Settings complete]
and press the 4 button.
15
Formatting the Memory
1
2
3
Use this camera to format (initialize) an SD Memory Card that is unused
or has been used on other cameras or digital devices. Be aware that
formatting deletes all the data stored on the SD Memory Card/built-in
memory.
Press the 3 button and use the four-way controller (45) to
display [W Setting] menu.
Use the four-way controller (23) to select [Format], and then
press the four-way controller (5).
Use the four-way controller (23)
to select [Format], and then press
the 4 button.
Format
All data will be deleted
Format
Cancel
OK
OK
16
1
2
3
4
1
2
3
3
3
Aim the camera at the subject, then press the shutter release
button. The flash discharges automatically depending on the
brightness.
Taking Pictures
Frame the subject using the focus frame on the display.
Press the zoom button to change the capture area.
Right (T) Enlarges the subject.
Left (W) Widens the area that is captured by the
camera.
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in
focus.
Press the shutter release button fully.
The picture is taken.
Recording Movies
Point the camera at your subject in A mode.
Press the Movie button.
Recording starts.
Press the Movie button.
Recording stops.
Use the Q button to switch between the A (capture)
mode and Q (playback) mode.
17
1
Edit
0 4 / 0 4 /2 0 12
1 0 0-0 0 3 8
1 4 : 2 5
2
Memo
4
4
You can play back the captured images on the display.
Playing Back Images
Press the Q button after shooting.
The image appears on the display.
100-0038
100-0038
04/04/2012
Edit
Edit
Press the four-way controller (45) to play back the previous or
next image.
Press the zoom button to switch to thumbnail/folder/calendar display.
04/04/2012
14:25
14:25
18
Deleting Images
1
2
OKOKOK
OK
100-00171 0 0 - 0 0 1 7100-0017
Delete
Cancel
3
4
Memo
Deleting a Single Image
You can delete a single image currently displayed on the display.
Playback the image you want to delete.
Press the i button.
The confirmation screen appears.
Use the four-way controller (23) to select [Delete].
Press the 4 button.
• You can delete multiple or all files at once.
• You can protect stored images from being accidentally deleted.
19
You can choose the playback function you want to use from the
Selecting a Playback Mode
Slideshow
1 / 2
Cancel
Playback Mode Palette.
Press the four-way controller (3) while an image is displayed in
playback mode.
Use the four-way controller
then press the 4 button.
(2345) to choose a playback mode,
1/2
Slideshow
Slideshow
1/2
For continuously playing
back images. Screen or
sound effects can be set
MENU
Cancel
Cancel
OK
OKOKOK
20
You can perform the following operation
Using the Four-way Controller
1
2
3
1 /2
Lan dsc ape
Can ce l
4
by pressing the four-way controller when
1
the camera is in capture mode.
Drive Modes
Each time you press the four-way
2
controller (2), the drive mode
switches between the following
modes.
4
9 → g → j → q
Flash Modes
Each time you press the four-way controller (4), the flash mode
switches between the following modes.
, → a → b → d
Focus Mo des
Each time you press the four-way controller (5), the focus mode
switches between the following modes.
= → q → r → 3 → s
Shooting Modes
Press the four-way controller
Landscape
Landscape
(3) to display the Capture
Mode Palette.
Use the four-way controller
(2345) to choose a
shooting mode according to
the situation, then press the
For capturing landscape
views. Enhances colors
of sky and foliage
MENU
Cancel
Cancel
4 button.
3
1/2
1/2
OK
OKOKOK
21
For details about how to use the Optio LS465, refer to the Operating Manual.
Optio LS465 Operating Manual
22
Information for Users on Collection and Disposal of Old Equipment and Used
Batteries
1. In the European Union
These symbols on the products, packaging and/or accompanying
documents mean that used electrical and electronic equipme nts and
batteries should not be mixed with general household waste.
Used electrical/electronic equipments and batteries must be treated
separately and in accordance with le gislation that requires prop er
treatment, recovery and recycling of these products.
By disposing of these products correctly you will help ensure that the
waste undergoes the necessary treatment, recovery and recycling
and thus prevent potential negative effects on the environment and
human health which could otherwise arise due to inappropriate
waste handling.
If a chemical symbol is added beneath the symbol shown above, in accordance
with the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd =
Cadmium, Pb = Lead) is present in the battery at a concentration above an
applicable threshold specified in the Battery Directive.
For more information about collection and recyclin g of used products, please
contact your local authorities, your waste disposal service or the point of sale
where you purchased the products.
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to discard used
products, please contact your local authorities or dealer and ask for the correct
method of disposal.
For Switzerland: Used electrical/electronic equipment can be returned free of
charge to the dealer, even when you don’t purchase a new product. Furth er
collection facilities are listed on the home page of www.swico.ch
or www.sens.ch.
23
24
25
PENTAX RICOH IMAGING CO., LTD.
PENTAX RICOH IMAGING
FRANCE S.A.S.
(European Headquarters)
PENTAX RICOH IMAGING
DEUTSCHLAND GmbH
PENTAX RICOH IMAGING
UK LTD.
PENTAX RICOH IMAGING
AMERICAS
CORPORATION
PENTAX RICOH IMAGING
CANADA INC.
2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
112 Quai de Bezons, B.P. 204, 95106 Argenteuil
Cedex, FRANCE
(HQ - http://www.pentax.eu)
(France - http://www.pentax.fr)
Julius-Vosseler-Strasse 104, 22527 Hamburg,
GERMANY
(http://www.pentax.de)
PENTAX Ho use, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
633 17th Street, Suite 2600, Denver, Colorado 80202,
U.S.A.
(http://www.pentaximaging.com)
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA
(http://www.pentax.ca)
http://www.pentax.jp/english
• Specifications and external dimensions are subject to change without notice.
OPLS46571/ENG Copyright © PENTAX RICOH IMAGING CO., LTD. 2012
FOM 01.05.2012 Printed in Europe
Loading...