Pentax ISL-CAM SOFTWARE GUIDE
PENTAX Digital Still Camera
Utility Software
ISL_CAM for Windows/Macintosh
Version 1.0
User’s Guide
TWAIN Data Source for Windows
Photoshop Plug-in Bridge for Macintosh
For
Windows 3.1
Windows 95
Windows NT 3.51 and 4.0
Macintosh
Ichikawa Soft Laboratory Co., Ltd.
Windows and Windows NT are registered trademarks of Microsoft Corporation in the
U.S. and other countries.
Macintosh and Mac are registered trademarks of Apple Computer, Inc. in the U.S. and
other countries.
Photoshop is a registered trademark of Adobe Systems Incorporated.
PowerPC is a trademark of International Business Machines Corporation.
CONTENTS
1. Read Me First 4
2. System Requirements And Installation 5
3. ISL_CAM Features And Notes 6
4. Camera Selection/Setup In ISL_CAM 7
5. Image Transfer: From Camera 10
6. Image Transfer: To Camera 14
7. User Support 15
-3-
1. Read Me First
Using This Software
Thank you for purchasing the PENTAX Utility Software. This
section contains important information on using this software.
Please read this guide thoroughly before you begin installation.
Disclaimer
The user assumes all risks when using the Utility Software and
is responsible for any damage resulting from installation or use
of the Utility Software. This software is licensed as is, and the
authors of this software, listed below, do not accept any responsibility for damage resulting from its use.
Copyright
Ichikawa Soft Laboratory Co., Ltd. copyrights this guide and
other printed materials included in the software package with
all rights reserved. The CD-ROM included in this software
package includes redistributed modules copyrighted by
Microsoft Corporation.
Copyright 1994-96 Microsoft Corporation, All rights reserved.
Ichikawa Soft Laboratory Co., Ltd. copyrights all other programs included in this software.
The names of products and companies in this manual are
generally trademarks or registered trademarks of said companies.
-4-
License Agreement
Area
Use of this software is limited to the USA only. This product
cannot be exported or used abroad.
Installing And Using This Software
This software may be installed on one computer only. If you
want to install the Utility Software on more than one computer,
you must purchase one software package for each computer.
Prohibition Of Reproducing This Software
No component part of this software may be copied in any form.
Prohibition of Reverse Engineering
No component part of this software may be reverse compiled,
reverse assembled, reverse engineered, or analyzed in any form
or in any way.
2. System Requirements And Installation
ISL_CAM Windows Requirements
• Windows 3.1 or 95, Windows NT 3.51 or 4.0 (The CD-
ROM includes a 16 bit version for Windows 3.1 and a 32
bit version for Windows 95 and NT.)
• 16 MB RAM (32 MB for Windows NT)
• 8 bit color (256 colors) or better
• CD-ROM drive
-5-
ISL_CAM Macintosh Requirements
• 68030 processor or better (PowerPC recommended)
• 24 MB RAM
• 8 bit color (256 colors) or better
• CD-ROM drive
Windows 3.1 Installation
1. Start up Windows 3.1 and insert CD-ROM.
2. Run “setup.exe” in the “16 bit” directory.
Windows 95/NT Installation
1. Start up Windows 95/NT and insert CD-ROM.
2. Run “setup.exe” in the “32 bit” folder.
Macintosh Installation
1. Insert CD-ROM.
2. Double-click the “Installer” icon on the CD-ROM.
3. ISL_CAM Features And Notes
Used on a PC or Macintosh computer, this utility inputs and
outputs images from/to a digital still camera via a serial interface. This utility has the following features:
• When used alone, it can download images from the camera
to a PC or Macintosh computer. Images can also be uploaded from the PC or Macintosh to the camera.
• When used as a TWAIN driver, it can transfer images from
the camera to a TWAIN compliant application (Windows.)
• When used as a Photoshop Plug-in module, it can transfer
images from the camera to a Plug-in Bridge compatible
application (Macintosh.)
Before using ISL_CAM, please note the following:
• Set the camera to PC communication standby status (file
-6-
Loading...