Pelco CM9760-CXTA Specsheet

PRODUCT SPECIFICATION

CM9760-CXTA (FRONT)

CM9760-CXTA (REAR)

CM9760-CXTA Coaxitron® Translator

INTERFACE UNIT FOR COAXITRON-CAPABLE RECEIVERS

analog systems and controls

Product Features

• Allows Coaxitron® Control from Any RS-422 P or D Protocol Device

• 16 Looping Video Inputs Allow Easy Connection Between Switch and

Cameras

• Send PTZ Control Commands Through a Camera’s Video Cable

• Fits a Standard 19-Inch Rack Mount

The CM9760-CXTA interfaces Pelco’s matrix switchers that use

®

Pelco P protocol with Pelco’s receivers that use Coaxitron

protocol

for command and control functions.

The CM9760-CXTA will also interface Pelco’s digital video recorders
(DVRs) that use Pelco D protocol with Pelco’s receivers that use
Coaxitron protocol for command and control functions.

®

CX9000, Legacy

, Spectra®, and Esprit® receivers can be used with

the CM9760-CXTA.

The 32 BNCs are looped inside the unit. Each BNC on the top row is
paired with a BNC on the bottom row. This allows either the top or
bottom BNC to be selected as an input or output to communicate to
or from the receiver.

The rear of the CM9760-CXTA has input and output connectors that
allow two translator units to be cascaded. This makes 32 Coaxitron
ports available that can be controlled from one RS-422
communication port on a System 9700 Series CC1.

The eight-position DIP switch allows the protocol for the BNC inputs
to be set to either 15 bits or 32 bits. The DIP switch is also used to
configure Pelco P or Pelco D protocol and data rates.

1.75

(4.45)

10.63

(27.00)

9760

17.40 (44.20)

19.00 (48.26)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.

CM9760-CXTA

CoaxitronÆ Translator Unit

Made In USA

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C539 / REVISED 10-31-10

TECHNICAL SPECIFICATIONS

Pelco, the Pelco logo, and other tradema rks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. All other

product names and services are the p roperty of their respective companies.

Product specifications and availability are subject to change without notice.

©Copyright 2010, Pelco, Inc. All rights reserved.

MODEL

CM9760-CXTA Coaxitron translator

ELECTRICAL

Input Voltage 100 to 240 VAC, 50/60 Hz, auto-ranging
Power Consumption 15 VA
Coaxitron Ports
Video Format NTSC or PAL
Video Level ±6 dB minimum
Coaxitron Level 0.7 V peak
Data Ports
Input RS-422, 8-way, 4-wire, RJ-45 connector

DIP-switch selectable baud rate, even parity

Output RS-422, 8-way, 4-wire, RJ-45 connector

DIP-switch selectable baud rate, even parity
Indicators Power LED (green)
Fusing 1/4A, 250 VAC

MECHANICAL

Connectors
Video BNC type (32 total)
Power 3-wire, 18 AWG
RS-422 RJ-45 (8-way), connectors (2 total)

RECEIVER/DRIVERS "TYPE"

GENERAL

Dimensions
Base Only 1.75" H x 17.40" W x 10.63" D

(4.45 x 44.20 x 27.00 cm)

With Rack Ears 1.75" H x 19.00" W x 10.63" D (1 RU)

(4.45 x 48.26 x 27.00 cm)
Mounting Fits 19-inch EIA-standard rack
Operating Temperature 32° to 158°F (0° to 70°C)
Unit Weight 5.7 lb (2.59 kg)
Shipping Weight 13 lb (5.91 kg)

CERTIFICATIONS/RATINGS

• CE, Class B

• FCC, Class B

•C-Tick

COMPATIBLE DEVICES

CM9700-CC1
KBD200A (Direct Mode)
KBD300A (Direct Mode)
CM9760-KBD (Direct Mode)
DX4000, DVR5100, DX8100 (Digital Video Recorder)

CM9760-KBD (DIRECT MODE)

DX8100 (DIGITAL VIDEO RECORDER)

LEGACY

AND

ESPRIT

OR

SPECTRA

AND

CX9000

COAXIAL COMMAND

& CONTROL

VIDEO

(16 CHANNELS)

MATRIX/KEYBOARD DVR

OR

RS-422
(PELCO P
PROTOCOL)

CM9760-CXTA

(COAXITRON TRANSLATOR)

VIDEO TO SWITCH

OR OTHER DEVICES

(16 CHANNELS)

RS-422
(PELCO D
PROTOCOL)

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada Tel: [phone] • FAX: [phone]
International Tel: [phone] • FAX: [phone]
www.pelco.com