Pelco CM9700UTP16A-US, CM9700UTP32A-US Specsheet
PRODUCT SPECIFICATION
video transmission
CM9700UTP Series Multichannel Video Receiver
ACTIVE VIDEO TRANSMISSION OVER UNSHIELDED TWISTED PAIR
Product Features
• 16- or 32-Channel Active Video Receiver
• Full Motion Color/Black-White Video up to 4,000 ft (1,219 m)
• Adaptive Video Equalization Technology Within Defined Distance
Range
• Video, Fan, and Temperature Indicators and an Audible Alarm
• UTP Range Selection and Indicators
• Each Channel Has a BNC Connector for Video Output
• Compatible with All Pelco Cameras, Enclosures, and Domes
Equipped with Twisted Pair
• Video Ribbon Cable Connectors for Connecting to a
CM9700 Series Matrix
• Easy Termination with RJ-45 UTP Connectors
• Optional Patch Panels Convert RJ-45 Connections to Individual
Screw Terminal Connections
The
CM9700UTP Series
32-channel unit that can receive live video over unshielded twisted
pair (UTP) cable. The
or black-white video up to 3,000 ft (900 m) using Cat5 or 4,000 ft
(1,200 m) using Cat5e or Cat6 UTP cable. The unit can be connected
to the optional TW3016-PATCH1 or TW3032-PATCH1 patch panel.
Each unit can be connected to a CM9780-MXB matrix using the
provided video ribbon cable connectors.
The
CM9700UTP Series
the unit quick and easy to configure and use. The unit provides a rotary
switch and LED for each channel. Use the rotary switch to select a
UTP cable distance: 1,000 ft (300 m); 2,000 ft (600 m); 3,000 ft (900 m);
or 4,000 ft (1,200 m).
For optimal tuning, adjust the rotary switch to the correct color video
range position; the device automatically adjusts the gain and adapts
to the cable length. The channel LED glows green when color video is
received over UTP and the unit is properly tuned, orange when blackwhite video is received, and red when no video is received over UTP.
CM9700UTP Series
multichannel active receiver is a 16- or
receives full motion color
front panel controls and indicators make
CM9700UTP16A
CM9700UTP32A
• Supports NTSC and PAL
• Built-In Surge Suppression for UTP Video Inputs
• Can Be Mounted into a Standard EIA 19-Inch Rack
The
CM9700UTP Series
power. If a fan fails or the unit operating temperature rises above
95°F (35°C), the Pelco badge flashes and an alarm sounds.
Additionally, each fan is equipped with an LED that glows red to
indicate fan failure.
The unit's adaptive video equalization technology ensures high-quality
video processing by correcting for video transmission losses over UTP
cable within the selected distance range. The
automatically adapts to cable lengths within the selected range for
composite signals with colorburst, and it allows fixed-equalization
settings for video signals without burst. The device also compensates
for low frequency and chroma band losses.
Conveniently make video input and output cable connections through
the unit’s back panel. The
32-channel BNC video output connectors and eight RJ-45 UTP video
input ports (four video inputs per port). One or two video ribbon cable
connectors, depending on the model, are provided for interfacing the
CM9700UTP Series
Pelco badge glows blue when the unit has
CM9700UTP Series
CM9700UTP Series
to a CM9780-MXB matrix.
provides 16- or
TECHNICAL SPECIFICATIONS
MODEL
CM9700UTP16A 16-channel active receiver; 16 BNC
connectors, four RJ-45 video input
connectors, and one ribbon cable
connector
CM9700UTP32A 32-channel active receiver; 32 BNC
connectors, eight RJ-45 video input
connectors, and two ribbon cable
connectors
A suffix of -US, -UK, -EU, or -AU is added to the model number when ordering
a region-specific power cord. For example, CM9700UTP32A-US is the base
model with a power cord for use in the United States. Refer to the following
table.
Suffix Part Number Region
-US US-320-C13 United States
-UK UK-320-C13 United Kingdom, Ireland, and Hong Kong
-EU EU-320-C13 Most of continental Europe
-AU AU-320-C13 Australia and New Zealand
SUPPLIED ACCESSORIES
1 power cord (USA, UK, EU, or AU)
8 UTP Cat5e cable assemblies, 2.0 ft (0.61 m)
Rack hardware
VIDEO
Video Standards NTSC/PAL/EIA/CCIR composite
Video Outputs
CM9700UTP16A 16 BNC and 1 ribbon cable connector
CM9700UTP32A 32 BNC and 2 ribbon cable connectors
Frequency Response 50 Hz to 6 MHz
Common Mode/Differential
Mode Rejection >60 dB
Video Output 1.2 Vp-p
ELECTRICAL
Input Voltage 100 to 240 VAC, 50 to 60 Hz, autoranging
Input Current
CM9700UP16A 0.38 A
CM9700UPT32A 0.75 A
Wire Type UTP (24 AWG minimum)
Wire Category Cat5, Cat5e, or Cat6
Wire Distance
Cat5 3,000 ft (914 m)
Cat5e and Cat6 4,000 ft (1,219 m)
DC Loop Resistance 20 ohms per 328 ft (100 m)
Differential Capacitance 6.6 nF/328 ft (100 m) maximum
Transient Immunity 300 W peak pulse power (8/20 US)
Single wire (solid) 24 AWG (0.25 mm2)
Stranded wire (flexible) 24 AWG (1.0 mm2)
MECHANICAL
Connectors
BNC Video output
Ribbon Cable Connector Video output
RJ-45 UTP input
Power Connector IEC connector
Construction Steel chassis, aluminum front panel
Finish Black matte finish
FRONT PANEL INDICATORS/FUNCTIONS
Pelco Badge
Power Blue
Temperature and Fan Status Flashes blue
Alarm Status Audible
Video Status Green, red, orange
Fan Alarm Red
ENVIRONMENTAL
Operating Temperature 32° to 95°F (0° to 35°C) at unit air intake
Relative Humidity 90% maximum, noncondensing
Note:
The temperature at the unit air intake can be significantly higher than
room temperature. Temperature is affected by rack configuration, floor layout,
air conditioning strategy, and other issues. To prevent performance failure and
unit damage, make sure the temperature at the unit is continuously within the
operating temperature range.
PHYSICAL
Dimensions 9.00" D x 18.80" W x 1.72" H
Weight (approximate) Unit
CM9700UTP16A 8.10 lb (3.68 kg) 13.00 lb (5.90 kg)
CM9700UTP32A 9.25 lb (4.19 kg) 14.00 lb (6.40 kg)
(23.00 x 47.80 x 4.37 cm)
Shipping
CERTIFICATIONS/RATINGS
• CE, Class B
• FCC, Class B
• UL/cUL Listed
• C-Tick
OPTIONAL ACCESSORIES
TW3001P Single-channel passive transceiver
TW3004P 4-channel passive transceiver
TW3008P 8-channel passive transceiver
TW3016P 16-channel passive transceiver
TW3032P 32-channel passive transceiver
TW3001AT Active transmitter
TW3016-PATCH1 16-channel patch panel
TW3032-PATCH1 32-channel patch panel
Loading...